wifi: ath12k: fix WMI TLV header misalignment

When buf_len is not 4-byte aligned in ath12k_wmi_mgmt_send(), the
firmware asserts and triggers a recovery. The following error
messages are observed:

wifi: ath12k: fix WMI TLV header misalignment

When buf_len is not 4-byte aligned in ath12k_wmi_mgmt_send(), the
firmware asserts and triggers a recovery. The following error
messages are observed:

ath12k_pci 0004:01:00.0: failed to submit WMI_MGMT_TX_SEND_CMDID cmd
ath12k_pci 0004:01:00.0: failed to send mgmt frame: -108
ath12k_pci 0004:01:00.0: failed to tx mgmt frame, vdev_id 0 :-108
ath12k_pci 0004:01:00.0: waiting recovery start...

This issue was observed when running 'iw wlanx set power_save off/on'
in MLO station mode, which triggers the sending of an SMPS action frame
with a length of 27 bytes to the AP. To resolve the misalignment, use
buf_len_aligned instead of buf_len when constructing the WMI TLV header.

Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1

Fixes: d889913205cf ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250908015139.1301437-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

show more ...

wifi: ath12k: Fix missing station power save configuration

Commit afbab6e4e88d ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed()
for MLO") replaced the bss_info_changed() callback with vif_cfg

wifi: ath12k: Fix missing station power save configuration

Commit afbab6e4e88d ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed()
for MLO") replaced the bss_info_changed() callback with vif_cfg_changed()
and link_info_changed() to support Multi-Link Operation (MLO). As a result,
the station power save configuration is no longer correctly applied in
ath12k_mac_bss_info_changed().

Move the handling of 'BSS_CHANGED_PS' into ath12k_mac_op_vif_cfg_changed()
to align with the updated callback structure introduced for MLO, ensuring
proper power-save behavior for station interfaces.

Tested-on: WCN7850 hw2.0 PCI WLAN.IOE_HMT.1.1-00011-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1

Fixes: afbab6e4e88d ("wifi: ath12k: modify ath12k_mac_op_bss_info_changed() for MLO")
Signed-off-by: Miaoqing Pan <miaoqing.pan@oss.qualcomm.com>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20250908015025.1301398-1-miaoqing.pan@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

show more ...

wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stations

Currently, when updating EMLSR capabilities of a multi-link (ML) station,
only the EMLSR parameters (e.g., padding delay, t

wifi: ath12k: Set EMLSR support flag in MLO flags for EML-capable stations

Currently, when updating EMLSR capabilities of a multi-link (ML) station,
only the EMLSR parameters (e.g., padding delay, transition delay, and
timeout) are sent to firmware. However, firmware also requires the
EMLSR support flag to be set in the MLO flags of the peer assoc WMI
command to properly handle EML operating mode notification frames.

Set the ATH12K_WMI_FLAG_MLO_EMLSR_SUPPORT flag in the peer assoc WMI
command when the ML station is EMLSR-capable, so that the firmware can
respond to EHT EML action frames from associated stations.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.4.1-00199-QCAHKSWPL_SILICONZ-1

Fixes: 4bcf9525bc49 ("wifi: ath12k: update EMLSR capabilities of ML Station")
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Rameshkumar Sundaram <rameshkumar.sundaram@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250801104920.3326352-1-rameshkumar.sundaram@oss.qualcomm.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>

show more ...