| 092f0892 | 09-Nov-2018 |
Stanislav Fomichev <sdf@google.com> |
bpftool: support loading flow dissector
This commit adds support for loading/attaching/detaching flow
dissector program.
When `bpftool loadall` is called with a flow_dissector prog (i.e. when the
'
bpftool: support loading flow dissector
This commit adds support for loading/attaching/detaching flow
dissector program.
When `bpftool loadall` is called with a flow_dissector prog (i.e. when the
'type flow_dissector' argument is passed), we load and pin all programs.
User is responsible to construct the jump table for the tail calls.
The last argument of `bpftool attach` is made optional for this use
case.
Example:
bpftool prog load tools/testing/selftests/bpf/bpf_flow.o \
/sys/fs/bpf/flow type flow_dissector \
pinmaps /sys/fs/bpf/flow
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 0 0 0 0 \
value pinned /sys/fs/bpf/flow/IP
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 1 0 0 0 \
value pinned /sys/fs/bpf/flow/IPV6
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 2 0 0 0 \
value pinned /sys/fs/bpf/flow/IPV6OP
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 3 0 0 0 \
value pinned /sys/fs/bpf/flow/IPV6FR
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 4 0 0 0 \
value pinned /sys/fs/bpf/flow/MPLS
bpftool map update pinned /sys/fs/bpf/flow/jmp_table \
key 5 0 0 0 \
value pinned /sys/fs/bpf/flow/VLAN
bpftool prog attach pinned /sys/fs/bpf/flow/flow_dissector flow_dissector
Tested by using the above lines to load the prog in
the test_flow_dissector.sh selftest.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
show more ...
|
| f98e46a2 | 08-Nov-2018 |
Quentin Monnet <quentin.monnet@netronome.com> |
tools: bpftool: update references to other man pages in documentation
Update references to other bpftool man pages at the bottom of each
manual page. Also reference the "bpf(2)" and "bpf-helpers(7)"
tools: bpftool: update references to other man pages in documentation
Update references to other bpftool man pages at the bottom of each
manual page. Also reference the "bpf(2)" and "bpf-helpers(7)" man pages.
References are sorted by number of man section, then by
"prog-and-map-go-first", the other pages in alphabetical order.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
show more ...
|
| 0b592b5a | 16-Oct-2018 |
Jakub Kicinski <jakub.kicinski@netronome.com> |
tools: bpftool: add map create command
Add a way of creating maps from user space. The command takes
as parameters most of the attributes of the map creation system
call command. After map is crea
tools: bpftool: add map create command
Add a way of creating maps from user space. The command takes
as parameters most of the attributes of the map creation system
call command. After map is created its pinned to bpffs. This makes
it possible to easily and dynamically (without rebuilding programs)
test various corner cases related to map creation.
Map type names are taken from bpftool's array used for printing.
In general these days we try to make use of libbpf type names, but
there are no map type names in libbpf as of today.
As with most features I add the motivation is testing (offloads) :)
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
show more ...
|
| c034a177 | 15-Oct-2018 |
John Fastabend <john.fastabend@gmail.com> |
bpf: bpftool, add flag to allow non-compat map definitions
Multiple map definition structures exist and user may have non-zero
fields in their definition that are not recognized by bpftool and
libbp
bpf: bpftool, add flag to allow non-compat map definitions
Multiple map definition structures exist and user may have non-zero
fields in their definition that are not recognized by bpftool and
libbpf. The normal behavior is to then fail loading the map. Although
this is a good default behavior users may still want to load the map
for debugging or other reasons. This patch adds a --mapcompat flag
that can be used to override the default behavior and allow loading
the map even when it has additional non-zero fields.
For now the only user is 'bpftool prog' we can switch over other
subcommands as needed. The library exposes an API that consumes
a flags field now but I kept the original API around also in case
users of the API don't want to expose this. The flags field is an
int in case we need more control over how the API call handles
errors/features/etc in the future.
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
show more ...
|
| 7900efc1 | 18-Sep-2018 |
Yonghong Song <yhs@fb.com> |
tools/bpf: bpftool: improve output format for bpftool net
This is a followup patch for Commit f6f3bac08ff9
("tools/bpf: bpftool: add net support").
Some improvements are made for the bpftool net out
tools/bpf: bpftool: improve output format for bpftool net
This is a followup patch for Commit f6f3bac08ff9
("tools/bpf: bpftool: add net support").
Some improvements are made for the bpftool net output.
Specially, plain output is more concise such that
per attachment should nicely fit in one line.
Compared to previous output, the prog tag is removed
since it can be easily obtained with program id.
Similar to xdp attachments, the device name is added
to tc attachments.
The bpf program attached through shared block
mechanism is supported as well.
$ ip link add dev v1 type veth peer name v2
$ tc qdisc add dev v1 ingress_block 10 egress_block 20 clsact
$ tc qdisc add dev v2 ingress_block 10 egress_block 20 clsact
$ tc filter add block 10 protocol ip prio 25 bpf obj bpf_shared.o sec ingress flowid 1:1
$ tc filter add block 20 protocol ip prio 30 bpf obj bpf_cyclic.o sec classifier flowid 1:1
$ bpftool net
xdp:
tc:
v2(7) clsact/ingress bpf_shared.o:[ingress] id 23
v2(7) clsact/egress bpf_cyclic.o:[classifier] id 24
v1(8) clsact/ingress bpf_shared.o:[ingress] id 23
v1(8) clsact/egress bpf_cyclic.o:[classifier] id 24
The documentation and "bpftool net help" are updated
to make it clear that current implementation only
supports xdp and tc attachments. For programs
attached to cgroups, "bpftool cgroup" can be used
to dump attachments. For other programs e.g.
sk_{filter,skb,msg,reuseport} and lwt/seg6,
iproute2 tools should be used.
The new output:
$ bpftool net
xdp:
eth0(2) driver id 198
tc:
eth0(2) clsact/ingress fbflow_icmp id 335 act [{icmp_action id 336}]
eth0(2) clsact/egress fbflow_egress id 334
$ bpftool -jp net
[{
"xdp": [{
"devname": "eth0",
"ifindex": 2,
"mode": "driver",
"id": 198
}
],
"tc": [{
"devname": "eth0",
"ifindex": 2,
"kind": "clsact/ingress",
"name": "fbflow_icmp",
"id": 335,
"act": [{
"name": "icmp_action",
"id": 336
}
]
},{
"devname": "eth0",
"ifindex": 2,
"kind": "clsact/egress",
"name": "fbflow_egress",
"id": 334
}
]
}
]
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
show more ...
|
| 86f7d85c | 12-Jul-2018 |
Quentin Monnet <quentin.monnet@netronome.com> |
tools: bpf: build and install man page for eBPF helpers from bpftool/
Provide a new Makefile.helpers in tools/bpf, in order to build and
install the man page for eBPF helpers. This Makefile is also
tools: bpf: build and install man page for eBPF helpers from bpftool/
Provide a new Makefile.helpers in tools/bpf, in order to build and
install the man page for eBPF helpers. This Makefile is also included in
the one used to build bpftool documentation, so that it can be called
either on its own (cd tools/bpf && make -f Makefile.helpers) or from
bpftool directory (cd tools/bpf/bpftool && make doc, or
cd tools/bpf/bpftool/Documentation && make helpers).
Makefile.helpers is not added directly to bpftool to avoid changing its
Makefile too much (helpers are not 100% directly related with bpftool).
But the possibility to build the page from bpftool directory makes us
able to package the helpers man page with bpftool, and to install it
along with bpftool documentation, so that the doc for helpers becomes
easily available to developers through the "man" program.
Cc: linux-man@vger.kernel.org
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
show more ...
|
| f412eed9 | 04-May-2018 |
Jakub Kicinski <jakub.kicinski@netronome.com> |
tools: bpftool: add simple perf event output reader
Users of BPF sooner or later discover perf_event_output() helpers
and BPF_MAP_TYPE_PERF_EVENT_ARRAY. Dumping this array type is
not possible, how
tools: bpftool: add simple perf event output reader
Users of BPF sooner or later discover perf_event_output() helpers
and BPF_MAP_TYPE_PERF_EVENT_ARRAY. Dumping this array type is
not possible, however, we can add simple reading of perf events.
Create a new event_pipe subcommand for maps, this sub command
will only work with BPF_MAP_TYPE_PERF_EVENT_ARRAY maps.
Parts of the code from samples/bpf/trace_output_user.c.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
show more ...
|
| 0c90f224 | 18-Apr-2018 |
Quentin Monnet <quentin.monnet@netronome.com> |
tools: bpftool: make it easier to feed hex bytes to bpftool
bpftool uses hexadecimal values when it dumps map contents:
# bpftool map dump id 1337
key: ff 13 37 ff value: a1 b2 c3 d4 ff ff
tools: bpftool: make it easier to feed hex bytes to bpftool
bpftool uses hexadecimal values when it dumps map contents:
# bpftool map dump id 1337
key: ff 13 37 ff value: a1 b2 c3 d4 ff ff ff ff
Found 1 element
In order to lookup or update values with bpftool, the natural reflex is
then to copy and paste the values to the command line, and to try to run
something like:
# bpftool map update id 1337 key ff 13 37 ff \
value 00 00 00 00 00 00 1a 2b
Error: error parsing byte: ff
bpftool complains, because it uses strtoul() with a 0 base to parse the
bytes, and that without a "0x" prefix, the bytes are considered as
decimal values (or even octal if they start with "0").
To feed hexadecimal values instead, one needs to add "0x" prefixes
everywhere necessary:
# bpftool map update id 1337 key 0xff 0x13 0x37 0xff \
value 0 0 0 0 0 0 0x1a 0x2b
To make it easier to use hexadecimal values, add an optional "hex"
keyword to put after "key" or "value" to tell bpftool to consider the
digits as hexadecimal. We can now do:
# bpftool map update id 1337 key hex ff 13 37 ff \
value hex 0 0 0 0 0 0 1a 2b
Without the "hex" keyword, the bytes are still parsed according to
normal integer notation (decimal if no prefix, or hexadecimal or octal
if "0x" or "0" prefix is used, respectively).
The patch also add related documentation and bash completion for the
"hex" keyword.
Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Suggested-by: David Beckett <david.beckett@netronome.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
show more ...
|