sh: sh7269: Remove bogus SSU GPIO function definitions

SH7269 has no Synchronous Serial Communication Unit (SSU).
Remove the bogus enum IDs, which caused holes in pinmux_func_gpios[].

Signed-off-by

sh: sh7269: Remove bogus SSU GPIO function definitions

SH7269 has no Synchronous Serial Communication Unit (SSU).
Remove the bogus enum IDs, which caused holes in pinmux_func_gpios[].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-7-geert+renesas@glider.be

show more ...

sh: sh7264: Remove bogus SSU GPIO function definitions

SH7264 has no Synchronous Serial Communication Unit (SSU).
Remove the bogus enum IDs, which caused holes in pinmux_func_gpios[].

Signed-off-by

sh: sh7264: Remove bogus SSU GPIO function definitions

SH7264 has no Synchronous Serial Communication Unit (SSU).
Remove the bogus enum IDs, which caused holes in pinmux_func_gpios[].

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-6-geert+renesas@glider.be

show more ...

pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first tw

pinctrl: sh-pfc: sh7269: Fix CAN function GPIOs

pinmux_func_gpios[] contains a hole due to the missing function GPIO
definition for the "CTX0&CTX1" signal, which is the logical "AND" of the
first two CAN outputs.

A closer look reveals other issues:
- Some functionality is available on alternative pins, but the
PINMUX_DATA() entries is using the wrong marks,
- Several configurations are missing.

Fix this by:
- Renaming CTX0CTX1CTX2_MARK, CRX0CRX1_PJ22_MARK, and
CRX0CRX1CRX2_PJ20_MARK to CTX0_CTX1_CTX2_MARK, CRX0_CRX1_PJ22_MARK,
resp. CRX0_CRX1_CRX2_PJ20_MARK for consistency with the
corresponding enum IDs,
- Adding all missing enum IDs and marks,
- Use the right (*_PJ2x) variants for alternative pins,
- Adding all missing configurations to pinmux_data[],
- Adding all missing function GPIO definitions to pinmux_func_gpios[].

See SH7268 Group, SH7269 Group User’s Manual: Hardware, Rev. 2.00:
[1] Table 1.4 List of Pins
[2] Figure 23.29 Connection Example when Using Channels 0 and 1 as One
Channel (64 Mailboxes × 1 Channel) and Channel 2 as One Channel
(32 Mailboxes × 1 Channel),
[3] Figure 23.30 Connection Example when Using Channels 0, 1, and 2 as
One Channel (96 Mailboxes × 1 Channel),
[4] Table 48.3 Multiplexed Pins (Port B),
[5] Table 48.4 Multiplexed Pins (Port C),
[6] Table 48.10 Multiplexed Pins (Port J),
[7] Section 48.2.4 Port B Control Registers 0 to 5 (PBCR0 to PBCR5).

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20191218194812.12741-5-geert+renesas@glider.be

show more ...