/linux/arch/arm/boot/dts/ti/omap/ |
H A D | omap-zoom-common.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 6 #include "omap-gpmc-smsc911x.dtsi" 19 reg = <3 0 8>; /* CS3, offset 0, IO size 8 */ 20 bank-width = <2>; 21 reg-shift = <1>; 22 reg-io-width = <1>; 23 interrupt-parent = <&gpio4>; 25 clock-frequency = <1843200>; 26 current-speed = <115200>; 27 gpmc,mux-add-data = <0>; [all …]
|
/linux/arch/arm64/boot/dts/realtek/ |
H A D | rtd129x.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) 5 * Copyright (c) 2016-2019 Andreas Färber 12 #include <dt-bindings/interrupt-controller/arm-gic.h> 13 #include <dt-bindings/reset/realtek,rtd1295.h> 16 interrupt-parent = <&gic>; 17 #address-cells = <1>; 18 #size-cells = <1>; 20 reserved-memory { 21 #address-cells = <1>; 22 #size-cells = <1>; [all …]
|
H A D | rtd139x.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) 11 #include <dt-bindings/interrupt-controller/arm-gic.h> 12 #include <dt-bindings/reset/realtek,rtd1295.h> 15 interrupt-parent = <&gic>; 16 #address-cells = <1>; 17 #size-cells = <1>; 19 reserved-memory { 20 #address-cells = <1>; 21 #size-cells = <1>; 25 reg = <0x2f000 0x1000>; [all …]
|
H A D | rtd16xx.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/interrupt-controller/irq.h> 13 interrupt-parent = <&gic>; 14 #address-cells = <1>; 15 #size-cells = <1>; 17 reserved-memory { 18 #address-cells = <1>; 19 #size-cells = <1>; 23 reg = <0x2f000 0x1000>; [all …]
|
/linux/Documentation/devicetree/bindings/memory-controllers/ddr/ |
H A D | jedec,lpddr-channel.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/memory-controllers/ddr/jedec,lpddr-channel.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 16 - Julius Werner <jwerner@chromium.org> 21 - jedec,lpddr2-channel 22 - jedec,lpddr3-channel 23 - jedec,lpddr4-channel 24 - jedec,lpddr5-channel 26 io-width: [all …]
|
/linux/arch/arm/boot/dts/realtek/ |
H A D | rtd1195.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause) 3 * Copyright (c) 2017-2019 Andreas Färber 10 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 #include <dt-bindings/reset/realtek,rtd1195.h> 15 interrupt-parent = <&gic>; 16 #address-cells = <1>; 17 #size-cells = <1>; 20 #address-cells = <1>; 21 #size-cells = <0>; 25 compatible = "arm,cortex-a7"; [all …]
|
/linux/arch/arm/boot/dts/renesas/ |
H A D | r9a06g032.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 9 #include <dt-bindings/interrupt-controller/arm-gic.h> 10 #include <dt-bindings/clock/r9a06g032-sysctrl.h> 14 #address-cells = <1>; 15 #size-cells = <1>; 18 #address-cells = <1>; 19 #size-cells = <0>; 23 compatible = "arm,cortex-a7"; 24 reg = <0>; 30 compatible = "arm,cortex-a7"; [all …]
|
/linux/arch/arm64/boot/dts/intel/ |
H A D | keembay-soc.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 11 interrupt-parent = <&gic>; 12 #address-cells = <2>; 13 #size-cells = <2>; 16 #address-cells = <1>; 17 #size-cells = <0>; 20 compatible = "arm,cortex-a53"; 22 reg = <0x0>; 23 enable-method = "psci"; [all …]
|
/linux/Documentation/devicetree/bindings/net/can/ |
H A D | nxp,sja1000.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Wolfgang Grandegger <wg@grandegger.com> 15 - enum: 16 - nxp,sja1000 17 - technologic,sja1000 18 - items: 19 - const: renesas,r9a06g032-sja1000 # RZ/N1D 20 - const: renesas,rzn1-sja1000 # RZ/N1 [all …]
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imx27-eukrea-cpuimx27.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 /dts-v1/; 15 reg = <0xa0000000 0x04000000>; 18 clk14745600: clk-uart { 19 compatible = "fixed-clock"; 20 #clock-cells = <0>; 21 clock-frequency = <14745600>; 26 pinctrl-names = "default"; 27 pinctrl-0 = <&pinctrl_fec>; 32 pinctrl-names = "default"; [all …]
|
/linux/Documentation/devicetree/bindings/i2c/ |
H A D | opencores,i2c-ocores.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/i2c/opencores,i2c-ocores.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Peter Korsgaard <peter@korsgaard.com> 11 - Andrew Lunn <andrew@lunn.ch> 14 - $ref: /schemas/i2c/i2c-controller.yaml# 19 - items: 20 - enum: 21 - sifive,fu740-c000-i2c # Opencore based IP block FU740-C000 SoC [all …]
|
/linux/Documentation/devicetree/bindings/display/ |
H A D | intel,keembay-msscam.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/intel,keembay-msscam.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Anitha Chrisanthus <anitha.chrisanthus@intel.com> 11 - Edmond J Dea <edmund.j.dea@intel.com> 21 - const: intel,keembay-msscam 22 - const: syscon 24 reg: 27 reg-io-width: [all …]
|
H A D | allwinner,sun8i-a83t-dw-hdmi.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/display/allwinner,sun8i-a83t-dw-hdmi.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 15 in bridge/synopsys,dw-hdmi.yaml with the following device-specific 19 - Chen-Yu Tsai <wens@csie.org> 20 - Maxime Ripard <mripard@kernel.org> 23 "#phy-cells": 28 - const: allwinner,sun8i-a83t-dw-hdmi 29 - const: allwinner,sun50i-h6-dw-hdmi [all …]
|
/linux/Documentation/devicetree/bindings/serial/ |
H A D | snps-dw-apb-uart.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 4 $id: http://devicetree.org/schemas/serial/snps-dw-apb-uart.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Rob Herring <robh@kernel.org> 13 - $ref: serial.yaml# 14 - $ref: rs485.yaml# 16 - if: 20 - {} 21 - const: renesas,rzn1-uart [all …]
|
/linux/arch/arc/boot/dts/ |
H A D | vdk_axs10x_mb.dtsi | 1 // SPDX-License-Identifier: GPL-2.0-only 5 * Copyright (C) 2013-15 Synopsys, Inc. (www.synopsys.com) 10 compatible = "simple-bus"; 11 #address-cells = <1>; 12 #size-cells = <1>; 14 interrupt-parent = <&mb_intc>; 18 compatible = "fixed-clock"; 19 clock-frequency = <50000000>; 20 #clock-cells = <0>; 24 compatible = "fixed-clock"; [all …]
|
/linux/arch/arm64/boot/dts/bitmain/ |
H A D | bm1880.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 #include <dt-bindings/clock/bm1880-clock.h> 8 #include <dt-bindings/interrupt-controller/arm-gic.h> 9 #include <dt-bindings/reset/bitmain,bm1880-reset.h> 13 interrupt-parent = <&gic>; 14 #address-cells = <2>; 15 #size-cells = <2>; 18 #address-cells = <1>; 19 #size-cells = <0>; 23 compatible = "arm,cortex-a53"; [all …]
|
/linux/Documentation/devicetree/bindings/rtc/ |
H A D | epson,rtc7301.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Epson Toyocom RTC-7301SF/DG 15 - Akinobu Mita <akinobu.mita@gmail.com> 20 - epson,rtc7301dg 21 - epson,rtc7301sf 23 reg: 26 reg-io-width: 28 The size (in bytes) of the IO accesses that should be performed [all …]
|
/linux/Documentation/devicetree/bindings/display/rockchip/ |
H A D | rockchip,dw-hdmi.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/display/rockchip/rockchip,dw-hdmi.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Mark Yao <markyao0591@gmail.com> 17 - $ref: ../bridge/synopsys,dw-hdmi.yaml# 18 - $ref: /schemas/sound/dai-common.yaml# 23 - rockchip,rk3228-dw-hdmi 24 - rockchip,rk3288-dw-hdmi 25 - rockchip,rk3328-dw-hdmi [all …]
|
/linux/drivers/irqchip/ |
H A D | irq-renesas-intc-irqpin.c | 1 // SPDX-License-Identifier: GPL-2.0 14 #include <linux/io.h> 35 * SENSE is read-write 32-bit with 2-bits or 4-bits per IRQ (*) 36 * PRIO is read-write 32-bit with 4-bits per IRQ (**) 37 * SOURCE is read-only 32-bit or 8-bit with 1-bit per IRQ (***) 38 * MASK is write-only 32-bit or 8-bit with 1-bit per IRQ (***) 39 * CLEAR is write-only 32-bit or 8-bit with 1-bit per IRQ (***) 41 * (*) May be accessed by more than one driver instance - lock needed 42 * (**) Read-modify-write access by one driver instance - lock needed 43 * (***) Accessed by one driver instance only - no locking needed [all …]
|
/linux/arch/riscv/boot/dts/canaan/ |
H A D | k210.dtsi | 1 // SPDX-License-Identifier: GPL-2.0+ 3 * Copyright (C) 2019-20 Sean Anderson <seanga2@gmail.com> 6 #include <dt-bindings/clock/k210-clk.h> 7 #include <dt-bindings/pinctrl/k210-fpioa.h> 8 #include <dt-bindings/reset/k210-rst.h> 12 * Although the K210 is a 64-bit CPU, the address bus is only 32-bits 15 #address-cells = <1>; 16 #size-cells = <1>; 17 compatible = "canaan,kendryte-k210"; 21 * Since this is a non-ratified draft specification, the kernel does not [all …]
|
/linux/arch/mips/boot/dts/mti/ |
H A D | sead3.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 8 #include <dt-bindings/interrupt-controller/mips-gic.h> 11 #address-cells = <1>; 12 #size-cells = <1>; 13 compatible = "mti,sead-3"; 14 model = "MIPS SEAD-3"; 17 stdout-path = "serial1:115200"; 33 reg = <0x0 0x08000000>; 36 cpu_intc: interrupt-controller { [all …]
|
/linux/arch/riscv/boot/dts/sophgo/ |
H A D | cv180x.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0 OR MIT) 7 #include <dt-bindings/clock/sophgo,cv1800.h> 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/interrupt-controller/irq.h> 10 #include "cv18xx-reset.h" 13 #address-cells = <1>; 14 #size-cells = <1>; 17 compatible = "fixed-clock"; 18 clock-output-names = "osc_25m"; 19 #clock-cells = <0>; [all …]
|
/linux/Documentation/devicetree/bindings/net/ |
H A D | smsc,lan91c111.yaml | 1 # SPDX-License-Identifier: GPL-2.0 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 7 title: Smart Mixed-Signal Connectivity (SMSC) LAN91C9x/91C1xx Controller 10 - Nicolas Pitre <nico@fluxnic.net> 13 - $ref: ethernet-controller.yaml# 19 reg: 25 reg-shift: true 27 reg-io-width: 31 reset-gpios: [all …]
|
/linux/drivers/clk/mxs/ |
H A D | clk-frac.c | 1 // SPDX-License-Identifier: GPL-2.0-or-later 6 #include <linux/clk-provider.h> 8 #include <linux/io.h> 13 * struct clk_frac - mxs fractional divider clock 15 * @reg: register address 17 * @width: the divider bit width 25 void __iomem *reg; member 27 u8 width; member 40 div = readl_relaxed(frac->reg) >> frac->shift; in clk_frac_recalc_rate() 41 div &= (1 << frac->width) - 1; in clk_frac_recalc_rate() [all …]
|
/linux/arch/powerpc/boot/dts/fsl/ |
H A D | gef_ppc9a.dts | 1 // SPDX-License-Identifier: GPL-2.0-or-later 14 * Compiled with dtc -I dts -O dtb -o gef_ppc9a.dtb gef_ppc9a.dts 17 /include/ "mpc8641si-pre.dtsi" 25 reg = <0x0 0x40000000>; // set by uboot 29 reg = <0xfef05000 0x1000>; 37 6 0 0xfd000000 0x00800000 // IO FPGA (8-bit) 38 7 0 0xfd800000 0x00800000>; // IO FPGA (32-bit) 42 compatible = "gef,ppc9a-firmware-mirror", "cfi-flash"; 43 reg = <0x0 0x0 0x1000000>; 44 bank-width = <4>; [all …]
|