Home
last modified time | relevance | path

Searched +full:0 +full:x1e000000 (Results 1 – 25 of 56) sorted by relevance

123

/linux/Documentation/devicetree/bindings/bus/
H A Dpalmbus.yaml19 pattern: "^palmbus(@[0-9a-f]+)?$"
37 "@[0-9a-f]+$":
62 reg = <0x1e000000 0x100000>;
65 ranges = <0x0 0x1e000000 0x0fffff>;
72 gpio-ranges = <&pinctrl 0 0 95>;
74 reg = <0x600 0x100>;
/linux/arch/mips/include/asm/mach-ralink/
H A Dmt7621.h12 #define MT7621_PALMBUS_BASE 0x1C000000
13 #define MT7621_PALMBUS_SIZE 0x03FFFFFF
15 #define MT7621_SYSC_BASE IOMEM(0x1E000000)
17 #define SYSC_REG_CHIP_NAME0 0x00
18 #define SYSC_REG_CHIP_NAME1 0x04
19 #define SYSC_REG_CHIP_REV 0x0c
20 #define SYSC_REG_SYSTEM_CONFIG0 0x10
21 #define SYSC_REG_SYSTEM_CONFIG1 0x14
23 #define CHIP_REV_PKG_MASK 0x1
25 #define CHIP_REV_VER_MASK 0xf
[all …]
H A Drt3883.h15 #define RT3883_SDRAM_BASE 0x00000000
16 #define RT3883_SYSC_BASE IOMEM(0x10000000)
17 #define RT3883_TIMER_BASE 0x10000100
18 #define RT3883_INTC_BASE 0x10000200
19 #define RT3883_MEMC_BASE 0x10000300
20 #define RT3883_UART0_BASE 0x10000500
21 #define RT3883_PIO_BASE 0x10000600
22 #define RT3883_FSCC_BASE 0x10000700
23 #define RT3883_NANDC_BASE 0x10000810
24 #define RT3883_I2C_BASE 0x10000900
[all …]
/linux/drivers/gpu/drm/i915/gt/
H A Dgen9_renderstate.c11 0x000007a8,
12 0x000007b4,
13 0x000007bc,
14 0x000007cc,
19 0x7a000004,
20 0x01000000,
21 0x00000000,
22 0x00000000,
23 0x00000000,
24 0x00000000,
[all …]
H A Dgen8_renderstate.c11 0x00000798,
12 0x000007a4,
13 0x000007ac,
14 0x000007bc,
19 0x7a000004,
20 0x01000000,
21 0x00000000,
22 0x00000000,
23 0x00000000,
24 0x00000000,
[all …]
/linux/Documentation/devicetree/bindings/mtd/partitions/
H A Dbrcm,bcm963xx-imagetag.txt18 reg = <0x1e000000 0x2000000>;
26 cfe@0 {
27 reg = <0x0 0x10000>;
32 reg = <0x10000 0x7d0000>;
37 reg = <0x7e0000 0x10000>;
42 reg = <0x7f0000 0x10000>;
/linux/arch/arm/mach-shmobile/
H A Dsmp-emev2.c20 #define EMEV2_SCU_BASE 0x1e000000
21 #define EMEV2_SMU_BASE 0xe0110000
22 #define SMU_GENERAL_REG0 0x7c0
27 return 0; in emev2_boot_secondary()
/linux/arch/mips/boot/dts/mti/
H A Dmalta.dts7 /memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */
8 /memreserve/ 0x00001000 0x000ef000; /* YAMON */
9 /memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */
25 reg = <0x1bdc0000 0x20000>;
56 reg = <0x1e000000 0x400000>;
66 yamon@0 {
68 reg = <0x0 0x100000>;
74 reg = <0x100000 0x2e0000>;
79 reg = <0x3e0000 0x20000>;
87 reg = <0x1f000000 0x1000>;
[all …]
/linux/arch/arm/boot/dts/broadcom/
H A Dbcm53016-dlink-dwl-8610ap.dts13 memory@0 {
16 reg = <0x00000000 0x08000000>,
17 <0x88000000 0x08000000>;
26 gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
66 * Flash memory at 0x1e000000-0x1fffffff
72 reg = <0x1e080000 0x00020000>;
112 trx@0 {
114 reg = <0x00000000 0x02800000>;
121 reg = <0x02800000 0x02800000>;
128 reg = <0x05000000 0x03000000>;
H A Dbcm47094-dlink-dir-890l.dts31 memory@0 {
33 reg = <0x00000000 0x08000000>,
34 <0x88000000 0x08000000>;
46 gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
108 * The flash memory is memory mapped at 0x1e000000-0x1fffffff
114 reg = <0x1e1f0000 0x00010000>;
151 firmware@0 {
154 reg = <0x00000000 0x08000000>;
175 port@0 {
/linux/drivers/net/wireless/ath/ath5k/
H A Ddesc.h25 * @rx_control_0: RX control word 0
34 #define AR5K_DESC_RX_CTL1_BUF_LEN 0x00000fff /* data buffer length */
35 #define AR5K_DESC_RX_CTL1_INTREQ 0x00002000 /* RX interrupt request */
39 * @rx_status_0: RX status word 0
50 /* RX status word 0 fields/flags */
51 #define AR5K_5210_RX_DESC_STATUS0_DATA_LEN 0x00000fff /* RX data length */
52 #define AR5K_5210_RX_DESC_STATUS0_MORE 0x00001000 /* more desc for this frame */
53 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_ANT_5210 0x00004000 /* [5210] receive on ant 1 */
54 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_RATE 0x00078000 /* reception rate */
56 #define AR5K_5210_RX_DESC_STATUS0_RECEIVE_SIGNAL 0x07f80000 /* rssi */
[all …]
/linux/Documentation/devicetree/bindings/memory-controllers/
H A Darm,pl172.txt11 first address cell and it may accept values 0..N-1
88 Example for pl172 with nor flash on chip select 0 shown below.
92 reg = <0x40005000 0x1000>;
97 ranges = <0 0 0x1c000000 0x1000000
98 1 0 0x1d000000 0x1000000
99 2 0 0x1e000000 0x1000000
100 3 0 0x1f000000 0x1000000>;
107 mpmc,cs = <0>;
110 mpmc,write-enable-delay = <0>;
111 mpmc,output-enable-delay = <0>;
[all …]
/linux/arch/arm/boot/dts/arm/
H A Darm-realview-pba8.dts29 arm,hbi = <0x178>;
33 #size-cells = <0>;
36 cpu0: cpu@0 {
39 reg = <0>;
46 interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>;
56 reg = <0x1e001000 0x1000>,
57 <0x1e000000 0x100>;
63 interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>;
68 interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>;
81 interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>;
[all …]
H A Dvexpress-v2p-ca9.dts16 arm,hbi = <0x191>;
17 arm,vexpress,site = <0xf>;
38 #size-cells = <0>;
40 A9_0: cpu@0 {
43 reg = <0>;
71 reg = <0x60000000 0x40000000>;
79 /* Chipselect 3 is physically at 0x4c000000 */
83 reg = <0x4c000000 0x00800000>;
90 reg = <0x10020000 0x1000>;
92 interrupts = <0 44 4>;
[all …]
/linux/arch/powerpc/include/asm/
H A Ddcr-regs.h29 #define DCRN_CPR0_CONFIG_ADDR 0xc
30 #define DCRN_CPR0_CONFIG_DATA 0xd
33 #define DCRN_SDR0_CONFIG_ADDR 0xe
34 #define DCRN_SDR0_CONFIG_DATA 0xf
36 #define SDR0_PFC0 0x4100
37 #define SDR0_PFC1 0x4101
38 #define SDR0_PFC1_EPS 0x1c00000
40 #define SDR0_PFC1_RMII 0x02000000
41 #define SDR0_MFR 0x4300
42 #define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */
[all …]
/linux/arch/powerpc/boot/dts/fsl/
H A Dmpc8536ds.dtsi36 nor@0,0 {
40 reg = <0x0 0x0 0x8000000>;
44 partition@0 {
45 reg = <0x0 0x03000000>;
50 reg = <0x03000000 0x00e00000>;
56 reg = <0x03e00000 0x00200000>;
62 reg = <0x04000000 0x00400000>;
67 reg = <0x04400000 0x03b00000>;
72 reg = <0x07f00000 0x00080000>;
77 reg = <0x07f80000 0x00080000>;
[all …]
H A Dp2041rdb.dts67 size = <0 0x1000000>;
68 alignment = <0 0x1000000>;
71 size = <0 0x400000>;
72 alignment = <0 0x400000>;
75 size = <0 0x2000000>;
76 alignment = <0 0x2000000>;
81 ranges = <0x00000000 0xf 0x00000000 0x01008000>;
85 ranges = <0x0 0xf 0xf4000000 0x200000>;
89 ranges = <0x0 0xf 0xf4200000 0x200000>;
93 ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
[all …]
H A Dp2020ds.dtsi36 nor@0,0 {
40 reg = <0x0 0x0 0x8000000>;
44 ramdisk@0 {
45 reg = <0x0 0x03000000>;
50 reg = <0x03000000 0x00e00000>;
55 reg = <0x03e00000 0x00200000>;
60 reg = <0x04000000 0x00400000>;
65 reg = <0x04400000 0x03b00000>;
69 reg = <0x07f00000 0x00080000>;
74 reg = <0x07f80000 0x00080000>;
[all …]
/linux/arch/mips/alchemy/
H A Dboard-gpr.c42 alchemy_gpio_direction_output(4, 0); in gpr_reset()
43 alchemy_gpio_direction_output(5, 0); in gpr_reset()
48 alchemy_gpio_direction_output(1, 0); in gpr_reset()
81 [0] = {
91 .id = 0,
99 * 0x00000000-0x00200000 : "kernel"
100 * 0x00200000-0x00a00000 : "rootfs"
101 * 0x01d00000-0x01f00000 : "config"
102 * 0x01c00000-0x01d00000 : "yamon"
103 * 0x01d00000-0x01d40000 : "yamon env vars"
[all …]
H A Dboard-mtx1.c41 __asm__ __volatile__("jr\t%0" : : "r"(0xbfc00000)); in mtx1_reset()
57 alchemy_gpio_direction_output(204, 0); in board_setup()
64 alchemy_wrsys(~0, AU1000_SYS_TRIOUTCLR); in board_setup()
65 alchemy_gpio_direction_output(0, 0); /* Disable M66EN (PCI 66MHz) */ in board_setup()
68 alchemy_gpio_direction_output(5, 0); /* Disable eth PHY TX_ER */ in board_setup()
72 alchemy_gpio_direction_output(212, 0); /* red off */ in board_setup()
105 .dev_id = "mtx1-wdt.0",
115 .id = 0,
144 .size = 0x01C00000,
145 .offset = 0,
[all …]
/linux/arch/mips/ath25/
H A Dar5312_regs.h17 #define AR5312_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */
18 #define AR5312_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */
19 #define AR5312_IRQ_ENET1 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */
20 #define AR5312_IRQ_WLAN1 (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */
21 #define AR5312_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */
26 #define AR5312_MISC_IRQ_TIMER 0
41 * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet
44 #define AR5312_WLAN0_BASE 0x18000000
45 #define AR5312_ENET0_BASE 0x18100000
46 #define AR5312_ENET1_BASE 0x18200000
[all …]
/linux/arch/mips/include/asm/mach-loongson64/
H A Dloongson.h62 for (x = 0; x < 100000; x++) \
75 #define LOONGSON_FLASH_BASE 0x1c000000
76 #define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */
79 #define LOONGSON_LIO0_BASE 0x1e000000
80 #define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */
83 #define LOONGSON_BOOT_BASE 0x1fc00000
84 #define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */
86 #define LOONGSON_REG_BASE 0x1fe00000
87 #define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
90 #define LOONGSON3_REG_BASE 0x3ff00000
[all …]
/linux/arch/microblaze/include/asm/
H A Dpvr.h13 #define PVR_MSR_BIT 0x400
22 #define PVR0_PVR_FULL_MASK 0x80000000
23 #define PVR0_USE_BARREL_MASK 0x40000000
24 #define PVR0_USE_DIV_MASK 0x20000000
25 #define PVR0_USE_HW_MUL_MASK 0x10000000
26 #define PVR0_USE_FPU_MASK 0x08000000
27 #define PVR0_USE_EXC_MASK 0x04000000
28 #define PVR0_USE_ICACHE_MASK 0x02000000
29 #define PVR0_USE_DCACHE_MASK 0x01000000
30 #define PVR0_USE_MMU 0x00800000
[all …]
/linux/arch/mips/include/asm/mach-loongson2ef/
H A Dloongson.h51 for (x = 0; x < 100000; x++) \
60 #define LOONGSON_FLASH_BASE 0x1c000000
61 #define LOONGSON_FLASH_SIZE 0x02000000 /* 32M */
64 #define LOONGSON_LIO0_BASE 0x1e000000
65 #define LOONGSON_LIO0_SIZE 0x01C00000 /* 28M */
68 #define LOONGSON_BOOT_BASE 0x1fc00000
69 #define LOONGSON_BOOT_SIZE 0x00100000 /* 1M */
71 #define LOONGSON_REG_BASE 0x1fe00000
72 #define LOONGSON_REG_SIZE 0x00100000 /* 256Bytes + 256Bytes + ??? */
75 #define LOONGSON_LIO1_BASE 0x1ff00000
[all …]
/linux/drivers/net/wireless/broadcom/brcm80211/include/
H A Dchipcommon.h14 u32 chipid; /* 0x0 */
20 u32 otpstatus; /* 0x10, corerev >= 10 */
26 u32 intstatus; /* 0x20 */
30 u32 chipcontrol; /* 0x28, rev >= 11 */
31 u32 chipstatus; /* 0x2c, rev >= 11 */
34 u32 jtagcmd; /* 0x30, rev >= 10 */
40 u32 flashcontrol; /* 0x40 */
46 u32 broadcastaddress; /* 0x50 */
50 u32 gpiopullup; /* 0x58, corerev >= 20 */
51 u32 gpiopulldown; /* 0x5c, corerev >= 20 */
[all …]

123