| /linux/sound/soc/qcom/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
7 in Qualcomm Technologies SOC-based platforms.
56 Say Y or M if you want add support for SoC audio on the
57 Qualcomm Technologies IPQ806X-based Storm board.
60 tristate "SoC Audio support for APQ8016 SBC platforms"
65 APQ8016 SOC-based systems.
125 tristate "SoC ALSA USB offloading backing for QDSP6"
132 based platform sound cards. This will enable the
134 with the SoC USB framework to initialize a session
138 tristate "SoC ALSA audio driver for QDSP6"
[all …]
|
| /linux/drivers/gpu/drm/rockchip/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
25 Choose this option if you have a Rockchip soc chipset.
29 IP found on the SoC.
53 This selects support for Rockchip SoC specific extensions
55 on RK3288 or RK3399 based SoC, you should select this option.
64 This selects support for Rockchip SoC specific extensions
66 RK3399 based SoC, you should select this
73 This selects support for Rockchip SoC specific extensions
74 to enable Synopsys DesignWare Cores based DisplayPort transmit
75 controller support on Rockchip SoC, If you want to enable DP on
[all …]
|
| /linux/arch/arm/mach-bcm/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
3 bool "Broadcom SoC Support"
6 This enables support for Broadcom ARM based SoC chips
24 This enables support for systems based on Broadcom IPROC architected SoCs.
41 bool "Broadcom Hurricane 2 SoC support"
50 bool "Broadcom Northstar Plus SoC Support"
58 Support for Broadcom Northstar Plus SoC.
61 applications. The SoC features dual core Cortex A9 ARM CPUs,
63 Ethernet PHYs, DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and
67 bool "Broadcom BCM470X / BCM5301X ARM SoC"
[all …]
|
| /linux/arch/riscv/ |
| H A D | Kconfig.socs | 1 menu "SoC selection"
8 This enables support for Andes SoC platform hardware.
13 This enables support for Anlogic SoC platform hardware.
18 This enables support for ESWIN SoC platform hardware,
19 including the ESWIN EIC7700 SoC.
27 This enables support for Microchip SoC platforms.
30 bool "Renesas RISC-V SoCs"
32 This enables support for the RISC-V based Renesas SoCs.
38 This enables support for SiFive SoC platform hardware.
43 This enables support for Sophgo SoC platform hardware.
[all …]
|
| /linux/sound/soc/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
3 # SoC audio configuration
7 tristate "ALSA for SoC audio support"
16 specific driver for your SoC platform below.
19 SoC based systems like PDA's, Phones and Personal Media Players.
22 will be called snd-so
[all...] |
| /linux/drivers/clk/meson/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
54 bool "Meson8 SoC Clock controller support"
69 tristate "GXBB and GXL SoC clock controllers support"
85 tristate "AXG SoC clock controllers support"
114 tristate "Amlogic A1 SoC PLL controller support"
120 Support for the PLL clock controller on Amlogic A113L based
121 device, A1 SoC Family. Say Y if you want A1 PLL clock controller
125 tristate "Amlogic A1 SoC Peripherals clock controller support"
131 Support for the Peripherals clock controller on Amlogic A113L based
132 device, A1 SoC Family. Say Y if you want A1 Peripherals clock
[all …]
|
| /linux/drivers/net/mdio/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
30 Airoha AN7583 SoC's.
37 interface units of the Allwinner SoC that have an EMAC (A10,
41 tristate "APM X-Gene SoC MDIO bus controller"
45 APM X-Gene SoC's.
53 controllers found in the ASPEED AST2600 SoC. This is a driver for the
54 third revision of the ASPEED MDIO register interface - the first two
76 Broadcom iProc SoC's.
91 tristate "GPIO lib-based bitbanged MDIO buses"
95 Supports GPIO lib-based MDIO busses.
[all …]
|
| /linux/arch/arm/mach-mvebu/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
36 Say 'Y' here if you want your kernel to support boards based
37 on the Marvell Armada 370 SoC with device tree.
52 Say 'Y' here if you want your kernel to support boards based
53 on the Marvell Armada 375 SoC with device tree.
70 Say 'Y' here if you want your kernel to support boards based
71 on the Marvell Armada 380/385 SoC with device tree.
85 Say 'Y' here if you want your kernel to support boards based
86 on the Marvell Armada 39x SoC with device tree.
97 Say 'Y' here if you want your kernel to support boards based
[all …]
|
| /linux/Documentation/arch/arm/spear/ |
| H A D | overview.rst | 6 ------------
11 The ST Microelectronics SPEAr range of ARM9/CortexA9 System-on-Chip CPUs are
19 - SPEAr3XX (3XX SOC series, based on ARM9)
20 - SPEAr300 (SOC)
21 - SPEAr300 Evaluation Board
22 - SPEAr310 (SOC)
23 - SPEAr310 Evaluation Board
24 - SPEAr320 (SOC)
25 - SPEAr320 Evaluation Board
26 - SPEAr6XX (6XX SOC series, based on ARM9)
[all …]
|
| /linux/drivers/dma/stm32/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
12 Enable support for the on-chip DMA controller on STMicroelectronics
14 If you have a board based on STM32 SoC with such DMA controller
21 Enable support for the on-chip DMA multiplexer on STMicroelectronics
23 If you have a board based on STM32 SoC with such DMA multiplexer
32 Enable support for the on-chip MDMA controller on STMicroelectronics
34 If you have a board based on STM32 SoC with such DMA controller
42 Enable support for the on-chip DMA3 controller on STMicroelectronics
44 If you have a board based on STM32 SoC with such DMA3 controller
|
| /linux/drivers/clk/bcm/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
30 based on the ARM architecture
38 based on the MIPS architecture
47 based on the MIPS architecture.
62 based on the iProc architecture
70 Enable common clock framework support for the Broadcom Cygnus SoC
79 SoC
96 Enable common clock framework support for the Broadcom Northstar 2 SoC
104 Enable common clock framework support for the Broadcom Stingray SoC
107 tristate "Raspberry Pi firmware based clock support"
|
| /linux/Documentation/devicetree/bindings/ptp/ |
| H A D | brcm,ptp-dte.txt | 1 * Broadcom Digital Timing Engine(DTE) based PTP clock
4 - compatible: should contain the core compatibility string
5 and the SoC compatibility string. The SoC
6 compatibility string is to handle SoC specific
9 "brcm,ptp-dte"
10 SoC compatibility strings:
11 "brcm,iproc-ptp-dte" - for iproc based SoC's
12 - reg: address and length of the DTE block's NCO registers
16 ptp: ptp-dte@180af650 {
17 compatible = "brcm,iproc-ptp-dte", "brcm,ptp-dte";
|
| /linux/sound/soc/atmel/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
18 tristate "SoC PCM DAI support for AT91 SSC controller using PDC"
24 in PDC mode configured using audio-graph-card in device-tree.
27 tristate "SoC PCM DAI support for AT91 SSC controller using DMA"
33 in DMA mode configured using audio-graph-card in device-tree.
36 tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board"
42 Say Y if you want to add support for SoC audio on WM8731-based
56 tristate "SoC Audio support for WM8731-based at91sam9x5 board"
62 Say Y if you want to add support for audio SoC on an
63 at91sam9x5 based board that is using WM8731 codec.
[all …]
|
| /linux/drivers/phy/samsung/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
6 tristate "Exynos SoC series Display Port PHY driver"
15 tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver"
21 Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
29 Enable PCIe PHY support for Exynos SoC series.
33 tristate "Exynos SoC series UFS PHY driver"
38 Enable this to support the Samsung Exynos SoC UFS PHY driver for
43 tristate "S5P/Exynos SoC series USB 2.0 PHY driver"
52 2.0 PHY. Support for particular PHYs will be enabled based on the SoC
77 particular SoC is compiled in the driver. In case of S5PV210 two phys
[all …]
|
| /linux/Documentation/ABI/testing/ |
| H A D | sysfs-devices-soc | 5 The /sys/devices/ directory contains a sub-directory for each
6 System-on-Chip (SoC) device on a running platform. Information
7 regarding each SoC can be obtained by reading sysfs files. This
10 The directory created for each SoC will also house information
12 It has been agreed that if an SoC device exists, its supported
13 devices would be better suited to appear as children of that SoC.
19 Read-only attribute common to all SoCs. Contains the SoC machine
26 Read-only attribute common to all SoCs. Contains SoC family name
29 On many of ARM based silicon with SMCCC v1.2+ compliant firmware
57 Read-only attribute supported by most SoCs. Contains the SoC's
[all …]
|
| /linux/drivers/soc/fsl/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
3 # NXP/Freescale QorIQ series SOC drivers
6 menu "NXP/Freescale QorIQ SoC drivers"
8 source "drivers/soc/fsl/qbman/Kconfig"
9 source "drivers/soc/fsl/qe/Kconfig"
16 enabling, power-onreset(POR) configuration monitoring, alternate
19 Initially only reading SVR and registering soc device are supported.
50 The NXP QorIQ Processors based on ARM Core have RCPM module
51 (Run Control and Power Management), which performs all device-level
53 Note that currently this driver will not support PowerPC based
|
| /linux/arch/arm/mach-exynos/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
3 # Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
51 Samsung Exynos3 (Cortex-A7) SoC based systems
61 Samsung Exynos4 (Cortex-A9) SoC based systems
67 Samsung Exynos5 (Cortex-A15/A7) SoC based systems
|
| /linux/drivers/pinctrl/bcm/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
16 for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
44 If compiled as module it will be called pinctrl-bcm4908.
132 The Broadcom iProc based SoCs- Cygnus, NS2, NSP and Stingray, use
135 The Broadcom Cygnus SoC has 3 GPIO controllers including the ASIU
137 the always-ON GPIO controller (CRMU/AON). All 3 GPIO controllers are
168 The Broadcom Cygnus IOMUX driver supports group based IOMUX
181 Say yes here to enable the Broadcom NS SoC pins driver.
183 The Broadcom Northstar pins driver supports muxing multi-purpose pins
198 The Broadcom Northstar Plus SoC ChipcommonA GPIO controller is
[all …]
|
| /linux/drivers/net/can/ctucanfd/ |
| H A D | Kconfig | 2 tristate "CTU CAN-FD IP core" if COMPILE_TEST
4 This driver adds support for the CTU CAN FD open-source IP core.
8 is available (https://gitlab.fel.cvut.cz/canbus/zynq/zynq-can-sja1000-top).
9 Implementation on Intel FPGA-based PCI Express board is available
10 from project (https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd) and
11 on Intel SoC from project (https://gitlab.fel.cvut.cz/canbus/intel-soc-ctucanfd).
15 tristate "CTU CAN-FD IP core PCI/PCIe driver"
19 This driver adds PCI/PCIe support for CTU CAN-FD IP core.
20 The project providing FPGA design for Intel EP4CGX15 based DB4CGX15
22 at https://gitlab.fel.cvut.cz/canbus/pcie-ctucanfd .
[all …]
|
| /linux/sound/soc/ti/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
36 - daVinci devices
37 - Sitara line of SoCs (AM335x, AM438x, etc)
38 - OMAP4
39 - DRA7x devices
40 - Keystone devices
41 - K3 devices (am654, j721e)
69 tristate "SoC Audio support for Nokia N810"
74 Say Y or M if you want to add support for SoC audio on Nokia N810.
77 tristate "SoC Audio support for Nokia RX-51"
[all …]
|
| /linux/Documentation/devicetree/bindings/arm/nuvoton/ |
| H A D | nuvoton,ma35d1.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Nuvoton MA35 series SoC based platforms
10 - Jacky Huang <ychuang3@nuvoton.com>
13 Boards with an ARMv8 based Nuvoton MA35 series SoC shall have
22 - description: MA35D1 based boards
24 - enum:
25 - nuvoton,ma35d1-iot
26 - nuvoton,ma35d1-som
[all …]
|
| /linux/Documentation/devicetree/bindings/mailbox/ |
| H A D | cix,sky1-mbox.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/mailbox/cix,sky1-mbox.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Guomin Chen <Guomin.Chen@cixtech.com>
13 The Cixtech mailbox controller, used in the Cixtech Sky1 SoC,
15 within the SoC, such as the AP, PM, audio DSP, SensorHub MCU,
19 typically used in pairs-one for receiving and one for transmitting.
22 channel 0-7 - Fast channel with 32bit transmit register and IRQ support
23 channel 8 - Doorbell mode,using the mailbox as an interrupt-generating
[all …]
|
| /linux/Documentation/devicetree/bindings/mips/ |
| H A D | ralink.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Ralink SoC based Platforms
10 - Sergio Paracuellos <sergio.paracuellos@gmail.com>
13 Boards with a Ralink SoC shall have the following properties.
20 - description: Boards with Ralink RT2880 SoC
22 - enum:
23 - ralink,rt2880-eval-board
24 - const: ralink,rt2880-soc
[all …]
|
| /linux/drivers/clk/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0
59 Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs
62 tristate "Clock driver for Apple SoC NCOs"
87 These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
91 tristate "Raspberry Pi RP1-based clock support"
96 This multi-function device has 3 main PLLs and several clock
97 generators to drive the internal sub-peripherals.
106 multi-function device has one fixed-rate oscillator, clocked
137 be pre-programmed to support other configurations and features not yet
175 bool "Clock driver for Bitmain BM1880 SoC"
[all …]
|
| /linux/drivers/extcon/ |
| H A D | Kconfig | 1 # SPDX-License-Identifier: GPL-2.0-only
11 host USB ports. Many of 30-pin connectors including PDMI are
22 Say Y here to enable extcon device driver based on ADC values.
25 tristate "X-Power AXP288 EXTCON support"
30 and USB MUX switching by X-Power AXP288 PMIC.
48 Say Y here to enable GPIO based extcon support. Note that GPIO
59 based tablets, or other Baytrail / Cherrytrail devices.
105 enable a system with an integrated USB OTG dual-role transceiver to
106 function as an USB OTG dual-role device.
171 Say Y here to enable SPMI PMIC based USB cable detection
[all …]
|