Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critic

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"Mostly the usual clk driver updates and new SoC additions plus
non-critical data fixes for things that weren't used yet.

One thing that's new here in the core is SSC spread spectrum support
(SSC) in the clk provider API. The idea is that DT authors will
configure SSC for certain clks and they'll be configured at clk
provider registration time or when a consumer device is probed,
similar to how we handle assigned clk rates or parents.

On the clk driver side we have Qualcomm adding almost half the diff
because they add support for 4 different SoCs and then a long tail of
other SoCs like Mediatek, Renesas, Rockchip, SpaceMiT, etc. add more
SoC support this time around. Luckily it's mostly clk data for these
new SoCs because the actual clk_ops are already there. Beyond the new
drivers we get all the little fixups for more compilation coverage or
usage of more modern APIs. That all looks normal.

Finally, I kinda buried the lede, I'm bringing on Brian and Jerome to
help out with maintaining the clk subsystem. The current working model
is already semi-distributed in that silicon vendors typically take
care of their drivers and send me pull requests but I'm becoming a
bottleneck for new drivers and core framework review because this has
become a 100% volunteer effort on my part.

Mike is stepping down after all these years (thanks Mike!) and that
jump started the conversation around finding co-maintainers. Brian and
Jerome have graciously offered to help me with the work load, meaning
in the future they'll be sending pull requests and committing directly
to the clk.git tree. They've both been around on the list for a while,
I've met them both in person, and they've been making changes to the
core clk framework along with helping review patches so I'm pretty
confident this will work well.

Core:
- devm_clk_bulk_get_enable() consumer API
- devm_clk_hw_register_composite_pdata() provider API
- Spread Spectrum Clock (SSC) support via DT bindings and provider APIs
- Divider clk rounding improved (and tested)

New Drivers:
- Cix Sky1 audio subsystem (AUDSS)
- UltraRISC DP1000
- MediaTek MT8173 MFG_TOP
- Si549
- Aspeed AST2700 PECI
- Airoha EN7523 PCIe
- Rockchip RV1106
- Mobileye EyeQ7H
- Qualcomm Maili GCC, TCSR, RPMh, and video clks
- Qualcomm Shikra GCC, RPM, GPU, display, and audio clks
- Qualcomm Nord display and graphics clks
- Qualcomm Glymur camera and EVA clks
- Qualcomm Hawi video clks
- Amlogic A9 AO and peripheral clks
- Renesas R-Car X5H (R8A78000) CPG"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (269 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: samsung: Don't include <linux/mod_devicetable.h>
clk: at91: Read "reg" with helper
clk: renesas: Add R-Car X5H CPG driver
clk: rockchip: rk3576: fix source muxes for SPI0..SPI4
clk: rockchip: Add clock controller for the RV1106
dt-bindings: clock: rockchip: Add RV1106 CRU support
dt-bindings: clock: Document Renesas R-Car X5H Clock Pulse Generator
...

show more ...

Merge branches 'clk-pile' and 'clk-microchip' into clk-next

* clk-pile: (111 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is full

Merge branches 'clk-pile' and 'clk-microchip' into clk-next

* clk-pile: (111 commits)
clk: microchip: mpfs: fix regmap_update_bits() mask/val order
clk: visconti: Make sure clk_init_data is fully initialized
clk: ti: Make sure clk_init_data is fully initialized
MAINTAINERS: Add Brian Masney and Jerome Brunet as co-maintainers for clk subsystem
Drop Michael Turquette's clk maintainer entry
clk: ti: composite: resolve parent clocks by DT index, not by name
clk: ti: mux: resolve parent clocks by DT index, not by name
clk: devres: fix cleanup in devm_clk_get_optional_enabled_with_rate()
dt-bindings: clock: ti,keystone-gate: Convert to DT schema
dt-bindings: clock: ti: Convert APLL clock to DT schema
clk: zynq: pll: Fix kernel-doc after determine_rate() conversion
dt-bindings: clock: ti,clockdomain: Convert to DT schema
dt-bindings: clock: Correct white-space style
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
...

* clk-microchip:
clk: at91: Read "reg" with helper

show more ...

Merge tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

Pull clk patches from Brian Masney:

- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),

Merge tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

Pull clk patches from Brian Masney:

- New clock controller drivers for the Cix Sky1 audio subsystem (AUDSS),
UltraRISC DP1000, and MediaTek MT8173 MFG_TOP, along with their devicetree
bindings. Si549 support was added to the existing si544 driver.
- New clock and reset support for the Aspeed AST2700 PECI controller and Airoha
EN7523 PCIe PERSTOUT reset lines.
- The clk core gains devm_clk_bulk_get_enable() as the mandatory counterpart to
the existing optional variant, and exports
devm_clk_hw_register_composite_pdata() for modular drivers.
- Tegra gets a proper EMC clock implementation for Tegra114, 48MHz pll_p_out1
support needed for UEFI on Surface2, and the Xilinx clocking-wizard gains PLL
charge pump/lock parameter programming during dynamic reconfiguration.
- Bug fixes for a NULL pointer dereference from uninitialized clk_init_data in
the eswin driver, an IO remap leak in the MediaTek pllfh error path, inverted
gate control for MT8135 devapc_ck, a missing OF node put in tegra124-emc on
registration failure, a prepare reference leak in the palmas driver,
unregistered PLLs on MT6735 probe failure, a missing kasprintf NULL check in
pmc_atom, PCIe warm boot instability in the Airoha EN7523 driver, and a
clocking-wizard clock difference detection bug.
- Various cleanups across tegra, st, and mvebu providers to stop misusing the
consumer clock API, along with other minor fixes and improvements.

Signed-off-by: Brian Masney <bmasney@redhat.com>

* tag 'clk-misc-round-two-for-v7.3' of ssh://github.com/masneyb/linux: (45 commits)
clk: tegra: set up proper EMC clock implementation for Tegra114
clk: clocking-wizard: remove 20kHz restriction
clk: clocking-wizard: optimize clock search
clk: clocking-wizard: fix clock difference detection
clk: mediatek: mt8135: Fix inverted gate control for devapc_ck
clk: clocking-wizard: Program PLL CP/RES and lock parameters on reconfig
clk: tegra: support 48MHz clock for pll_p_out1
clk: aspeed: add AST2700 PECI clock
dt-bindings: clock: ast2700: add PECI clock
clk: mediatek: Add mt8173-mfgtop driver
dt-bindings: clock: mediatek: Add mt8173 mfgtop
clk: tegra: clean-up simple provider misuse of the consumer API
clk: st: clean-up simple provider misuse of the consumer API
clk: mvebu: clean-up simple provider misuse of the consumer API
clk: remove conditional return with no effect
clk: Add devm_clk_bulk_get_enable()
clk: en7523: add support for dedicated PCIe PERSTOUT reset
dt-bindings: clock: airoha: Add additional reset for PCIe PERSTOUT
arm64: dts: cix: sky1: add audss cru
reset: cix: add sky1 audss auxiliary reset driver
...

show more ...

Merge tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

Pull clk patches picked up by Brian Masney:

Here's various improvements and fixes for the clk subsystem that was posted

Merge tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux into clk-pile

Pull clk patches picked up by Brian Masney:

Here's various improvements and fixes for the clk subsystem that was posted prior
to the opening of the last merge window.

- Add spread spectrum clock (SSC) support to the clk framework, including a new
assigned-clock-sscs devicetree property and clk_hw_set_spread_spectrum()
API with KUnit tests (Peng Fan)
- Add SCMI clock OEM extensions for the i.MX95 clock driver and introduce a
common SCMI clock header (Peng Fan)
- Add clock, reset, and devicetree bindings for the ESWIN EIC7700 HSP clock and
reset generator (Xuyang Dong)
- Add clk_determine_rate_noop() helper for clock drivers that can do any rate,
and convert existing open-coded implementations across hisilicon, imx, qcom,
renesas, rp1, samsung, scpi, sprd, mediatek phy, and mediatek pmdomain
drivers (Brian Masney)
- Add kernel-doc documentation for struct clk_core and the core clock flags,
and wire up clk identifiers into the documentation build (Brian Masney)
- Fix clk_divider_bestdiv() returning the minimum rate instead of the maximum
rate for large rate requests, with KUnit tests (Lad Prabhakar)
- Fix Nuvoton MA35D1 PLL frequency calculation including ignored div_u64
return values, incorrect PLL_CTL1_FRAC bit field width, and broken
determine_rate logic (Joey Lu)
- Support unique clock names for multi-socket Tegra platforms (Jon Hunter)
- Allow COMPILE_TEST builds for HiSilicon clock drivers (Rosen Penev)
- Various fixes and cleanups from Akari Tsuyukusa, Alexander A. Klimov,
Brian Masney, David Carlier, David Laight, Min zhang, Myeonghun Pak,
Pavel Löbl, Randy Dunlap, Rob Herring, Rosen Penev, Uwe Kleine-König,
William Theesfeld, Xuyang Dong, and Yu-Chun Lin

Signed-off-by: Brian Masney <bmasney@redhat.com>
[sboyd@kernel.org: Fix allmodconfig modpost failure in scmi]

* tag 'clk-misc-for-v7.3' of ssh://github.com/masneyb/linux: (53 commits)
pmdomain: mediatek: mtk-mfg: use clk_determine_rate_noop()
pmdomain: mediatek: airoha: use clk_determine_rate_noop()
phy: mediatek: phy-mtk-hdmi-mt2701: use clk_determine_rate_noop()
clk: sprd: use clk_determine_rate_noop()
clk: scpi: use clk_determine_rate_noop()
clk: samsung: acpm: use clk_determine_rate_noop()
clk: rp1: use clk_determine_rate_noop()
clk: renesas: rzg2l-cpg: use clk_determine_rate_noop()
clk: qcom: smd-rpm: use clk_determine_rate_noop()
clk: qcom: rpmh: use clk_determine_rate_noop()
clk: qcom: rpm: use clk_determine_rate_noop()
clk: imx: scu: use clk_determine_rate_noop()
clk: hisilicon: hi3660-stub: use clk_determine_rate_noop()
clk: add clk_determine_rate_noop()
clk: imx: scu: drop redundant init.ops variable assignment
clk: test: convert constants to use HZ_PER_MHZ
docs: clk: include some identifiers to keep documentation up to date
clk: add kernel docs for struct clk_core
clk: add kernel docs for the core flags
clk: hisilicon: allow COMPILE_TEST builds
...

show more ...

clk: cix: add sky1 audss clock controller

Add a platform driver for the Cix Sky1 AUDSS CRU. The driver maps
the CRU registers and registers mux, divider and gate clocks for
DSP, SRAM, HDA, DMAC, I2S

clk: cix: add sky1 audss clock controller

Add a platform driver for the Cix Sky1 AUDSS CRU. The driver maps
the CRU registers and registers mux, divider and gate clocks for
DSP, SRAM, HDA, DMAC, I2S, mailbox, watchdog and timer blocks.

Four SoC-level audio reference clocks are enabled as inputs to the
internal clock tree. The driver releases the AUDSS NOC reset, enables
runtime PM and instantiates the auxiliary reset device.

Signed-off-by: Joakim Zhang <joakim.zhang@cixtech.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>

show more ...

clk: ultrarisc: Add DP1000 clock driver

Add a clock driver for the UltraRISC DP1000 SoC.

The clock tree is driven by a SYSPLL and provides fixed-factor clocks for
the subsystem and PCIe, divider-ba

clk: ultrarisc: Add DP1000 clock driver

Add a clock driver for the UltraRISC DP1000 SoC.

The clock tree is driven by a SYSPLL and provides fixed-factor clocks for
the subsystem and PCIe, divider-based root clocks for GMAC and the UART,
I2C, and SPI blocks, and per-instance gate clocks for UART0-3, I2C0-3,
and SPI0-1.

Signed-off-by: Jia Wang <wangjia@ultrarisc.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>

show more ...

clk: si544: add support for si549

Add support for Si549, which only differs from Si544 in internal
oscilator frequency. Si549 also comes in three types A,B and C.
Each having different maximum outpu

clk: si544: add support for si549

Add support for Si549, which only differs from Si544 in internal
oscilator frequency. Si549 also comes in three types A,B and C.
Each having different maximum output frequency.

This patch also fixes maximum frequency of Si544 C. Which should
be 325MHz according to datasheet.

Signed-off-by: Pavel Löbl <pavel@loebl.cz>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>

show more ...

clk: lan966x: Add MCHP_LAN966X_PCI dependency

The lan966x clock controller depends on the LAN969x architecture or the
LAN966x SoC.

This clock controller can be used by the LAN966x PCI device and so

clk: lan966x: Add MCHP_LAN966X_PCI dependency

The lan966x clock controller depends on the LAN969x architecture or the
LAN966x SoC.

This clock controller can be used by the LAN966x PCI device and so it
needs to be available when the LAN966x PCI device is enabled.

Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>

show more ...

clk: divider: Add KUnit tests for clk_divider_bestdiv() ULONG_MAX handling

Add KUnit tests to verify the behaviour of clk_divider_bestdiv() when
clk_round_rate() is called with ULONG_MAX, which is t

clk: divider: Add KUnit tests for clk_divider_bestdiv() ULONG_MAX handling

Add KUnit tests to verify the behaviour of clk_divider_bestdiv() when
clk_round_rate() is called with ULONG_MAX, which is the canonical way
to probe the maximum rate a clock can produce.

Two test cases are introduced:

- clk_divider_bestdiv_ulong_max_returns_max_rate: registers a 1 GHz
fixed-rate parent driving a table-based divider whose smallest entry
is div=2 (entries: 2, 4, 8). Calls clk_hw_round_rate(div_hw, ULONG_MAX)
and checks the result.

- clk_divider_bestdiv_mux_ulong_max_returns_max_rate: places a two-input
mux (4 GHz and 2 GHz fixed-rate parents, CLK_SET_RATE_PARENT) ahead of
the same table-based divider to verify correct parent selection under
ULONG_MAX.

Both tests use an explicit clk_div_table with a minimum divider of 2 so
that the pre-loop maxdiv clamping in clk_divider_bestdiv():

maxdiv = min(ULONG_MAX / rate, maxdiv);

clamps maxdiv to 1, causing _next_div() to return 2 on the first
iteration and skip the loop body entirely. This makes bestdiv fall back
to the maximum divider, returning the minimum rate rather than the
maximum.

The expected values intentionally reflect the buggy output:
- test 1: PARENT_RATE_1GHZ / 8 (minimum rate, not maximum)
- test 2: 0 (invalid, loop never populated bestdiv)

These will be corrected to PARENT_RATE_1GHZ / 2 and PARENT_RATE_4GHZ / 2
respectively once the fix to clk_divider_bestdiv() is applied.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Brian Masney <bmasney@redhat.com>

show more ...

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager Page Splitting for KVM RISC-V
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest

show more ...

Merge drm/drm-next into drm-xe-next

Sync some i915/display changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next to v7.2-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.

If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

show more ...

sched_ext: Merge branch 'for-7.3-arena-args' into for-7.3

Pull to receive the __arena argument conversion:

67f1f4a48c24 ("sched_ext: Pass kernel arena pointers to ops_cid callbacks")
a8dc810968af

sched_ext: Merge branch 'for-7.3-arena-args' into for-7.3

Pull to receive the __arena argument conversion:

67f1f4a48c24 ("sched_ext: Pass kernel arena pointers to ops_cid callbacks")
a8dc810968af ("sched_ext: Convert sub-cap kfuncs to __arena cmask arguments")
a05c5b5cb5cf ("sched_ext: Convert scx_bpf_cid_override() to __arena array arguments")

along with the bpf-next branch carrying the __arena argument support they
depend on.

Conflict in kernel/sched/ext/ext.c between:

c384ab8a0b13 ("sched_ext: Move the config-off sub-cap kfunc stubs into sub.c")

and:

a8dc810968af ("sched_ext: Convert sub-cap kfuncs to __arena cmask arguments")

which updated the stubs in their old ext.c location. Resolved by keeping
ext.c without the stubs and applying the prototype conversion to the
relocated stubs in sub.c.

Signed-off-by: Tejun Heo <tj@kernel.org>

show more ...

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next into for-7.3-arena-args

Pull bpf-next d114bb989367 ("Merge branch
'add-arena-argument-support-to-kfuncs-and-struct

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next into for-7.3-arena-args

Pull bpf-next d114bb989367 ("Merge branch
'add-arena-argument-support-to-kfuncs-and-struct_ops'") to make the __arena
and __arena__nullable kfunc and struct_ops argument suffixes available. The
suffixed arguments will be used to convert sched_ext kfuncs and struct_ops
callbacks that currently pass arena pointers as scalars and rebase them by
hand.

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-7.2-rc2).

No conflicts.

Adjacent changes:

MAINTAINERS:
56114690ff3c ("MAINTA

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR (net-7.2-rc2).

No conflicts.

Adjacent changes:

MAINTAINERS:
56114690ff3c ("MAINTAINERS: Update Marvell octeontx2 driver maintainers")
eb56577ae9a5 ("ehea: remove the ehea driver")

net/core/netpoll.c:
45f1458a8501 ("netpoll: fix a use-after-free on shutdown path")
84c0ff1efb62 ("netpoll: do not warn when the best-effort pool refill fails")

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

show more ...

Merge branch 'for-7.3/steam' into for-linus

- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improveme

Merge branch 'for-7.3/steam' into for-linus

- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improvements and code refactoring (Vicki Pfau)

show more ...

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
dro

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
drop the unused initializer in the platform_device_id table for
sh_mtu2 (Uwe Kleine-König)

- Remove redundant dev_err()/dev_err_probe() messages when
devm_request_*_irq() fails, as the helper already logs an error
message (Pan Chuang)

- Fix a boot hang on Allwinner D1 when a forced minimum delta is used
with the sun4i timer (Felix Yan)

- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the
IRQ on failure in the NXP PIT driver (WenTao Liang)

- Fix incorrect unmapping of shared MMIO between the clocksource and
clockevent drivers. If one of them fails to initialize, the error
path unmaps the shared MMIO region, leaving the other driver with an
invalid mapping on clps711x (Guangshuo Li)

- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing
regular spinlocks with raw_spinlock_t in atomic contexts (Marek
Szyprowski)

- Use __raw_readl() and __raw_writel() instead of ioread32() and
iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam
Adilov)

- Fix a missing clk_disable_unprepare() call in the timer
initialization error path of the Armada driver (Yuho Choi)

Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.3 merge window.

Merge tag 'v7.2-rc3' into next

Sync up with mainline to pull in stable fixes to avoid merge conflicts.

Merge tag 'v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into pwrseq/for-next

Linux 7.2-rc1

Merge tag 'v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-next

Linux 7.2-rc1

Merge drm/drm-fixes into drm-misc-fixes

Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

Merge tag 'v7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into gpio/for-current

Linux 7.2-rc1