Merge branch 'for-6.19/nintendo' into for-linus

- switch to WQ_PERCPU workaueues (Marco Crivellari)
- reduce potential initialization blocking time of hid-nintendo (Willy Huang)

Merge remote-tracking branch 'drm/drm-next' into msm-next-robclark

Back-merge drm-next to get caught up.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

Merge drm/drm-next into drm-xe-next

Backmerging to bring in 6.18-rc1.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-intel-next

Sync to v6.18-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf before 6.18-rc1

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Merge branch 'objtool/core'

Bring in the UDB and objtool data annotations to avoid conflicts while further extending the bug exceptions.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge tag 'v6.18-rc6' into for-linus

Sync up with the mainline to bring in definition of
INPUT_PROP_HAPTIC_TOUCHPAD.

spi: Merge up v6.18-rc1

Ensure my CI has a sensible baseline.

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a f

Merge tag 'asoc-fix-v6.18-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.18

A moderately large collection of driver specific fixes, plus a few new
quirks and device IDs. The NAU8821 changes are a little large but more
in mechanical ways than in ways that are complex.

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Updating drm-misc-fixes to the state of v6.18-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driv

Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.

Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.

Included in here are:

- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems

- MEI driver updates and additions

- NVMEM driver updates

- slimbus removal for an unused driver and some other minor updates

- coresight driver updates and additions

- MHI driver updates

- comedi driver updates and fixes

- extcon driver updates

- interconnect driver additions

- eeprom driver updates and fixes

- minor UIO driver updates

- tiny W1 driver updates

But the majority of new code is in the rust bindings and additions,
which includes:

- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.

- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.

- Android Binder driver implemented in Rust.

This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.

The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.

All of these have been in linux-next for a while"

* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...

show more ...

Merge tag 'extcon-next-for-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v6.18

Detailed description for this

Merge tag 'extcon-next-for-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v6.18

Detailed description for this pull request:
- Fix wakeup source leaks on device unbind for extcon drivers

- Add new Maxim MAX14526 MUIC extcon driver and dt-binding document
: The MAX14526 is designed to simplify interface requirements on portable
devices by multiplexing common inputs (USB, UART, Microphone, Stereo Audio
and Composite Video) on a single micro/mini USB connector. The USB input
supports Hi-Speed USB and the audio/video inputs feature
: This provides the following supported external connector detection
- EXTCON_USB
- EXTCON_USB_HOST
- EXTCON_CHG_USB_FAST
- EXTCON_DISP_MHL

- Convert legacy DT binding to YAML of richktek,rt8973a-muic.yaml

- Add missing DT binding information of that must include either id-gpios or
vbus-gpios for linux,extcon-usb-gpio.yaml

* tag 'extcon-next-for-6.18' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
dt-bindings: extcon: linux,extcon-usb-gpio: GPIO must be provided
dt-bindings: extcon: rt8973a: Convert DT bindings to YAML
extcon: max14526: depends on I2C to prevent build warning/errors
extcon: max14526: avoid defined but not used warning
extcon: Add basic support for Maxim MAX14526 MUIC
dt-bindings: extcon: Document Maxim MAX14526 MUIC
extcon: adc-jack: Cleanup wakeup source only if it was enabled
extcon: qcom-spmi-misc: Fix wakeup source leaks on device unbind
extcon: fsa9480: Fix wakeup source leaks on device unbind
extcon: axp288: Fix wakeup source leaks on device unbind
extcon: adc-jack: Fix wakeup source leaks on device unbind

show more ...

extcon: max14526: depends on I2C to prevent build warning/errors

Make EXTCON_MAX14526 depend on I2C to address a kconfig warning and
subsequent build errors:

WARNING: unmet direct dependencies dete

extcon: max14526: depends on I2C to prevent build warning/errors

Make EXTCON_MAX14526 depend on I2C to address a kconfig warning and
subsequent build errors:

WARNING: unmet direct dependencies detected for REGMAP_I2C
Depends on [m]: I2C [=m]
Selected by [y]:
- EXTCON_MAX14526 [=y] && EXTCON [=y]

ld: vmlinux.o: in function `max14526_driver_init':
extcon-max14526.c:(.init.text+0x77b0e): undefined reference to `i2c_register_driver'
ld: vmlinux.o: in function `max14526_driver_exit':
extcon-max14526.c:(.exit.text+0x467c): undefined reference to `i2c_del_driver'

Fixes: 145af3ddd1cd ("extcon: Add basic support for Maxim MAX14526 MUIC")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Link: https://lore.kernel.org/lkml/20250515234803.1385375-1-rdunlap@infradead.org/

show more ...

extcon: Add basic support for Maxim MAX14526 MUIC

The MAX14526 is designed to simplify interface requirements on portable
devices by multiplexing common inputs (USB, UART, Microphone, Stereo Audio
a

extcon: Add basic support for Maxim MAX14526 MUIC

The MAX14526 is designed to simplify interface requirements on portable
devices by multiplexing common inputs (USB, UART, Microphone, Stereo Audio
and Composite Video) on a single micro/mini USB connector. The USB input
supports Hi-Speed USB and the audio/video inputs feature negative rail
signal operation allowing simple DC coupled accessories. These device allow
a single micro/mini USB port to support all the common interfaces on
Cellular phones and portable media players over the same external lines.

Link: https://lore.kernel.org/lkml/20250506073216.43059-3-clamor95@gmail.com/
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge tag 'v6.12-rc3' into perf-tools-next

To get the fixes in the current perf-tools tree.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Merge tag 'v6.12-rc1' into clk-meson-next

Linux 6.12-rc1

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the

Merge net-next/main to resolve conflicts

The wireless-next tree was based on something older, and there
are now conflicts between -rc2 and work here. Merge net-next,
which has enough of -rc2 for the conflicts to happen, resolving
them in the process.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>

show more ...

Merge drm/drm-next into drm-xe-next

Backmerging to resolve a conflict with core locally.

Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>

Merge drm/drm-next into drm-misc-next

Get drm-misc-next to up v6.12-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-next

Sync to v6.12-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'for-6.13/wacom' into for-linus

- Sanitization of BTN_TOOL_RUBBER handling (Jason Gerecke)