/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am57-pruss.dtsi | 11 reg = <0x4b226000 0x4>, 12 <0x4b226004 0x4>; 23 clocks = <&l4per2_clkctrl DRA7_L4PER2_PRUSS1_CLKCTRL 0>; 27 ranges = <0x00000000 0x4b200000 0x80000>; 29 pruss1: pruss@0 { 31 reg = <0x0 0x80000>; 36 pruss1_mem: memories@0 { 37 reg = <0x0 0x2000>, 38 <0x2000 0x2000>, 39 <0x10000 0x8000>; [all …]
|
H A D | omap5-l4-abe.dtsi | 1 &l4_abe { /* 0x40100000 */ 3 reg = <0x40100000 0x400>, 4 <0x40100400 0x400>; 10 ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ 11 <0x49000000 0x49000000 0x100000>; 12 segment@0 { /* 0x40100000 */ 18 <0x00000000 0x00000000 0x000400>, /* ap 0 */ 19 <0x00000400 0x00000400 0x000400>, /* ap 1 */ 20 <0x00022000 0x00022000 0x001000>, /* ap 2 */ 21 <0x00023000 0x00023000 0x001000>, /* ap 3 */ [all …]
|
H A D | omap4-l4-abe.dtsi | 1 &l4_abe { /* 0x40100000 */ 3 reg = <0x40100000 0x400>, 4 <0x40100400 0x400>; 10 ranges = <0x00000000 0x40100000 0x100000>, /* segment 0 */ 11 <0x49000000 0x49000000 0x100000>; 12 segment@0 { /* 0x40100000 */ 18 <0x00000000 0x00000000 0x000400>, /* ap 0 */ 19 <0x00000400 0x00000400 0x000400>, /* ap 1 */ 20 <0x00022000 0x00022000 0x001000>, /* ap 2 */ 21 <0x00023000 0x00023000 0x001000>, /* ap 3 */ [all …]
|
H A D | am33xx-l4.dtsi | 1 &l4_wkup { /* 0x44c00000 */ 4 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>; 6 reg = <0x44c00000 0x800>, 7 <0x44c00800 0x800>, 8 <0x44c01000 0x400>, 9 <0x44c01400 0x400>; 13 ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */ 14 <0x00100000 0x44d00000 0x100000>, /* segment 1 */ 15 <0x00200000 0x44e00000 0x100000>; /* segment 2 */ 17 segment@0 { /* 0x44c00000 */ [all …]
|
/linux/arch/mips/include/asm/mach-rc32434/ |
H A D | irq.h | 11 #define IC_GROUP0_PEND (REGBASE + 0x38000) 12 #define IC_GROUP0_MASK (REGBASE + 0x38008) 13 #define IC_GROUP_OFFSET 0x0C 27 #define UART0_IRQ (GROUP3_IRQ_BASE + 0) 29 #define ETH0_DMA_RX_IRQ (GROUP1_IRQ_BASE + 0)
|
/linux/Documentation/devicetree/bindings/remoteproc/ |
H A D | ti,pru-rproc.yaml | 19 The K3 SoCs containing ICSSG v1.0 (eg: AM65x SR1.0) also have two Auxiliary 21 containing the revised ICSSG v1.1 (eg: J721E, AM65x SR2.0) have an extra two 46 - ti,am654-tx-pru # for Tx_PRUs in K3 AM65x SR2.0 SoCs 90 pattern: "^rtu@[0-9a-f]+$" 102 pattern: "^txpru@[0-9a-f]+" 106 pattern: "^pru@[0-9a-f]+$" 119 pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */ 123 ranges = <0x0 0x300000 0x80000>; 125 pruss: pruss@0 { 127 reg = <0x0 0x80000>; [all …]
|
/linux/drivers/gpu/drm/amd/include/asic_reg/bif/ |
H A D | bif_4_1_sh_mask.h | 27 #define MM_INDEX__MM_OFFSET_MASK 0x7fffffff 28 #define MM_INDEX__MM_OFFSET__SHIFT 0x0 29 #define MM_INDEX__MM_APER_MASK 0x80000000 30 #define MM_INDEX__MM_APER__SHIFT 0x1f 31 #define MM_INDEX_HI__MM_OFFSET_HI_MASK 0xffffffff 32 #define MM_INDEX_HI__MM_OFFSET_HI__SHIFT 0x0 33 #define MM_DATA__MM_DATA_MASK 0xffffffff 34 #define MM_DATA__MM_DATA__SHIFT 0x0 35 #define CC_BIF_BX_FUSESTRAP0__STRAP_BIF_PX_CAPABLE_MASK 0x2 36 #define CC_BIF_BX_FUSESTRAP0__STRAP_BIF_PX_CAPABLE__SHIFT 0x1 [all …]
|
/linux/arch/powerpc/boot/dts/fsl/ |
H A D | b4860si-post.dtsi | 37 /* controller at 0x200000 */ 64 dcsr-epu@0 { 79 reg = <0x13000 0x1000>; 96 reg = <0x108000 0x1000 0x109000 0x1000>; 101 reg = <0x110000 0x1000 0x111000 0x1000>; 106 reg = <0x118000 0x1000 0x119000 0x1000>; 113 reg = <0x38000 0x4000>, <0x100e000 0x1000>; 114 interrupts = <133 2 0 0>; 118 reg = <0x3c000 0x4000>, <0x100f000 0x1000>; 119 interrupts = <135 2 0 0>; [all …]
|
H A D | t2081si-post.dtsi | 37 alloc-ranges = <0 0 0x10000 0>; 42 alloc-ranges = <0 0 0x10000 0>; 47 alloc-ranges = <0 0 0x10000 0>; 54 interrupts = <25 2 0 0>; 57 /* controller at 0x240000 */ 59 compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; 63 bus-range = <0x0 0xff>; 64 interrupts = <20 2 0 0>; 66 pcie@0 { 67 reg = <0 0 0 0 0>; [all …]
|
/linux/drivers/crypto/intel/iaa/ |
H A D | iaa_crypto_comp_fixed.c | 11 0x40030, 0x40031, 0x40032, 0x40033, 0x40034, 0x40035, 0x40036, 0x40037, 12 0x40038, 0x40039, 0x4003A, 0x4003B, 0x4003C, 0x4003D, 0x4003E, 0x4003F, 13 0x40040, 0x40041, 0x40042, 0x40043, 0x40044, 0x40045, 0x40046, 0x40047, 14 0x40048, 0x40049, 0x4004A, 0x4004B, 0x4004C, 0x4004D, 0x4004E, 0x4004F, 15 0x40050, 0x40051, 0x40052, 0x40053, 0x40054, 0x40055, 0x40056, 0x40057, 16 0x40058, 0x40059, 0x4005A, 0x4005B, 0x4005C, 0x4005D, 0x4005E, 0x4005F, 17 0x40060, 0x40061, 0x40062, 0x40063, 0x40064, 0x40065, 0x40066, 0x40067, 18 0x40068, 0x40069, 0x4006A, 0x4006B, 0x4006C, 0x4006D, 0x4006E, 0x4006F, 19 0x40070, 0x40071, 0x40072, 0x40073, 0x40074, 0x40075, 0x40076, 0x40077, 20 0x40078, 0x40079, 0x4007A, 0x4007B, 0x4007C, 0x4007D, 0x4007E, 0x4007F, [all …]
|
/linux/drivers/phy/cadence/ |
H A D | phy-cadence-salvo.c | 19 #define USB3_PHY_OFFSET 0x0 20 #define USB2_PHY_OFFSET 0x38000 22 #define PHY_PMA_CMN_CTRL1 0xC800 23 #define TB_ADDR_CMN_DIAG_HSCLK_SEL 0x01e0 24 #define TB_ADDR_CMN_PLL0_VCOCAL_INIT_TMR 0x0084 25 #define TB_ADDR_CMN_PLL0_VCOCAL_ITER_TMR 0x0085 26 #define TB_ADDR_CMN_PLL0_INTDIV 0x0094 27 #define TB_ADDR_CMN_PLL0_FRACDIV 0x0095 28 #define TB_ADDR_CMN_PLL0_HIGH_THR 0x0096 29 #define TB_ADDR_CMN_PLL0_SS_CTRL1 0x0098 [all …]
|
/linux/arch/arm/boot/dts/broadcom/ |
H A D | bcm-hr2.dtsi | 45 #size-cells = <0>; 47 cpu0: cpu@0 { 51 reg = <0x0>; 64 ranges = <0x00000000 0x19000000 0x00023000>; 68 a9pll: arm_clk@0 { 69 #clock-cells = <0>; 72 reg = <0x0 0x1000>; 77 reg = <0x20200 0x100>; 84 reg = <0x20600 0x20>; 92 reg = <0x20620 0x20>; [all …]
|
/linux/drivers/net/wireless/ath/ath10k/ |
H A D | coredump.c | 19 {0x800, 0x810}, 20 {0x820, 0x82C}, 21 {0x830, 0x8F4}, 22 {0x90C, 0x91C}, 23 {0xA14, 0xA18}, 24 {0xA84, 0xA94}, 25 {0xAA8, 0xAD4}, 26 {0xADC, 0xB40}, 27 {0x1000, 0x10A4}, 28 {0x10BC, 0x111C}, [all …]
|
/linux/drivers/net/wireless/realtek/rtlwifi/rtl8723ae/ |
H A D | reg.h | 7 #define REG_SYS_ISO_CTRL 0x0000 8 #define REG_SYS_FUNC_EN 0x0002 9 #define REG_APS_FSMCO 0x0004 10 #define REG_SYS_CLKR 0x0008 11 #define REG_9346CR 0x000A 12 #define REG_EE_VPD 0x000C 13 #define REG_AFE_MISC 0x0010 14 #define REG_SPS0_CTRL 0x0011 15 #define REG_SPS_OCP_CFG 0x0018 16 #define REG_RSV_CTRL 0x001C [all …]
|
/linux/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/ |
H A D | reg.h | 7 #define REG_SYS_ISO_CTRL 0x0000 8 #define REG_SYS_FUNC_EN 0x0002 9 #define REG_APS_FSMCO 0x0004 10 #define REG_SYS_CLKR 0x0008 11 #define REG_9346CR 0x000A 12 #define REG_EE_VPD 0x000C 13 #define REG_AFE_MISC 0x0010 14 #define REG_SPS0_CTRL 0x0011 15 #define REG_SPS_OCP_CFG 0x0018 16 #define REG_RSV_CTRL 0x001C [all …]
|
/linux/drivers/accel/habanalabs/include/goya/asic_reg/ |
H A D | goya_blocks.h | 16 #define mmPCI_NRTR_BASE 0x7FFC000000ull 17 #define PCI_NRTR_MAX_OFFSET 0x608 18 #define PCI_NRTR_SECTION 0x4000 19 #define mmPCI_RD_REGULATOR_BASE 0x7FFC004000ull 20 #define PCI_RD_REGULATOR_MAX_OFFSET 0x74 21 #define PCI_RD_REGULATOR_SECTION 0x1000 22 #define mmPCI_WR_REGULATOR_BASE 0x7FFC005000ull 23 #define PCI_WR_REGULATOR_MAX_OFFSET 0x74 24 #define PCI_WR_REGULATOR_SECTION 0x3B000 25 #define mmMME1_RTR_BASE 0x7FFC040000ull [all …]
|
/linux/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/ |
H A D | reg.h | 7 #define TXPKT_BUF_SELECT 0x69 8 #define RXPKT_BUF_SELECT 0xA5 9 #define DISABLE_TRXPKT_BUF_ACCESS 0x0 11 #define REG_SYS_ISO_CTRL 0x0000 12 #define REG_SYS_FUNC_EN 0x0002 13 #define REG_APS_FSMCO 0x0004 14 #define REG_SYS_CLKR 0x0008 15 #define REG_9346CR 0x000A 16 #define REG_EE_VPD 0x000C 17 #define REG_SYS_SWR_CTRL1 0x0010 [all …]
|
/linux/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/ |
H A D | reg.h | 7 #define TXPKT_BUF_SELECT 0x69 8 #define RXPKT_BUF_SELECT 0xA5 9 #define DISABLE_TRXPKT_BUF_ACCESS 0x0 11 #define REG_SYS_ISO_CTRL 0x0000 12 #define REG_SYS_FUNC_EN 0x0002 13 #define REG_APS_FSMCO 0x0004 14 #define REG_SYS_CLKR 0x0008 15 #define REG_9346CR 0x000A 16 #define REG_EE_VPD 0x000C 17 #define REG_AFE_MISC 0x0010 [all …]
|
/linux/arch/arm64/boot/dts/ti/ |
H A D | k3-am65-main.dtsi | 12 reg = <0x0 0x70000000 0x0 0x200000>; 15 ranges = <0x0 0x0 0x70000000 0x200000>; 17 atf-sram@0 { 18 reg = <0x0 0x20000>; 22 reg = <0xf0000 0x10000>; 26 reg = <0x100000 0x100000>; 37 reg = <0x00 0x01800000 0x00 0x10000>, /* GICD */ 38 <0x00 0x01880000 0x00 0x90000>, /* GICR */ 39 <0x00 0x6f000000 0x00 0x2000>, /* GICC */ 40 <0x00 0x6f010000 0x00 0x1000>, /* GICH */ [all …]
|
/linux/drivers/gpu/drm/msm/disp/dpu1/catalog/ |
H A D | dpu_8_4_sa8775p.h | 11 .max_mixer_blendstages = 0xb, 22 .base = 0x0, .len = 0x494, 25 [DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 }, 26 [DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 }, 27 [DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 }, 28 [DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0 }, 29 [DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 }, 30 [DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 }, 31 [DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 }, 32 [DPU_CLK_CTRL_DMA3] = { .reg_off = 0x2c4, .bit_off = 8 }, [all …]
|
H A D | dpu_8_0_sc8280xp.h | 23 .base = 0x0, .len = 0x494, 26 [DPU_CLK_CTRL_VIG0] = { .reg_off = 0x2ac, .bit_off = 0 }, 27 [DPU_CLK_CTRL_VIG1] = { .reg_off = 0x2b4, .bit_off = 0 }, 28 [DPU_CLK_CTRL_VIG2] = { .reg_off = 0x2bc, .bit_off = 0 }, 29 [DPU_CLK_CTRL_VIG3] = { .reg_off = 0x2c4, .bit_off = 0 }, 30 [DPU_CLK_CTRL_DMA0] = { .reg_off = 0x2ac, .bit_off = 8 }, 31 [DPU_CLK_CTRL_DMA1] = { .reg_off = 0x2b4, .bit_off = 8 }, 32 [DPU_CLK_CTRL_DMA2] = { .reg_off = 0x2bc, .bit_off = 8 }, 33 [DPU_CLK_CTRL_DMA3] = { .reg_off = 0x2c4, .bit_off = 8 }, 34 [DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 }, [all …]
|
H A D | dpu_9_2_x1e80100.h | 11 .max_mixer_blendstages = 0xb, 22 .base = 0, .len = 0x494, 25 [DPU_CLK_CTRL_REG_DMA] = { .reg_off = 0x2bc, .bit_off = 20 }, 33 .base = 0x15000, .len = 0x290, 38 .base = 0x16000, .len = 0x290, 43 .base = 0x17000, .len = 0x290, 48 .base = 0x18000, .len = 0x290, 53 .base = 0x19000, .len = 0x290, 58 .base = 0x1a000, .len = 0x290, 67 .base = 0x4000, .len = 0x344, [all …]
|
/linux/sound/soc/img/ |
H A D | img-i2s-in.c | 26 #define IMG_I2S_IN_RX_FIFO 0x0 28 #define IMG_I2S_IN_CTL 0x4 29 #define IMG_I2S_IN_CTL_ACTIVE_CHAN_MASK 0xfffffffc 32 #define IMG_I2S_IN_CTL_ME_MASK BIT(0) 34 #define IMG_I2S_IN_CH_CTL 0x4 35 #define IMG_I2S_IN_CH_CTL_CCDEL_MASK 0x38000 48 #define IMG_I2S_IN_CH_CTL_ME_MASK BIT(0) 50 #define IMG_I2S_IN_CH_STRIDE 0x20 71 return 0; in img_i2s_in_runtime_suspend() 85 return 0; in img_i2s_in_runtime_resume() [all …]
|
/linux/drivers/net/wireless/mediatek/mt76/mt76x0/ |
H A D | initvals_phy.h | 12 { MT_RF(0, 1), 0x01 }, 13 { MT_RF(0, 2), 0x11 }, 15 { MT_RF(0, 3), 0x73 }, /* VCO Freq Cal */ 16 { MT_RF(0, 4), 0x30 }, /* R4 b<7>=1, VCO cal */ 17 { MT_RF(0, 5), 0x00 }, 18 { MT_RF(0, 6), 0x41 }, 19 { MT_RF(0, 7), 0x00 }, 20 { MT_RF(0, 8), 0x00 }, 21 { MT_RF(0, 9), 0x00 }, 22 { MT_RF(0, 10), 0x0C }, [all …]
|
/linux/include/linux/soundwire/ |
H A D | sdw_intel.h | 15 #define SDW_SHIM_BASE 0x2C000 16 #define SDW_ALH_BASE 0x2C800 17 #define SDW_SHIM_BASE_ACE 0x38000 18 #define SDW_ALH_BASE_ACE 0x24000 19 #define SDW_LINK_BASE 0x30000 20 #define SDW_LINK_SIZE 0x10000 24 #define SDW_SHIM_LCAP 0x0 25 #define SDW_SHIM_LCAP_LCOUNT_MASK GENMASK(2, 0) 29 #define SDW_SHIM_LCTL 0x4 31 #define SDW_SHIM_LCTL_SPA BIT(0) [all …]
|