arm64: dts: renesas: r8a779{7|8}0: add TPU support

Describe TPU in the R8A779{7|8}0 device trees.

Based on the original (and large) patches by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vl

arm64: dts: renesas: r8a779{7|8}0: add TPU support

Describe TPU in the R8A779{7|8}0 device trees.

Based on the original (and large) patches by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.20

* Correct whitespace around assignm

Merge tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.20

* Correct whitespace around assignments

* R-Car Gen-3 SoCs:
- Enable SDR104 for SD devices
- Include R-Car product name in DTSI files to ease maintenance
* R-Car Gen-3 SoC based boards: Convert to new LVDS DT bindings
* R-Car Gen 3 Salvator-X and Salvator-XS boards:
- Override secondary addresses of ADV748x to avoid address conflicts
* R-Car Gen 3 based Salvator-XS board: Enable SATA

* R-Car M3-N (r8a77965) SoC:
- Add FDP1 device nodes
- Move arm_cc630p and timer nodes to restore sort-order of file
- Correct clock/reset for usb2_phy1
- Correct HS-USB compat string
- Add OPPs table for cpu devices enabling CPUFreq support
- Add CAN device placeholder nodes to facilitate adding
initial device tree for KF daughter board
- Attach SYS-DMAC to the IPMMU
* R-Car M3-N (r8a77965) based ULCB board:
- Initial device tree for board and KF daughter board

* R-Car E3 (r8a77990) SoC:
- Add SYS-DMAC, I2C VIN, CSI-2, MSIOF device nodes
- Add BRG support to SCIF2 which allows an increase in serial clock accuracy
- Use CPG/MSSR and SYSC binding definitions
* R-Car E3 (r8a77990) based Ebisu board: Enable PWM

* R-Car D3 (r8a77995) SoC: Attach the SYS-DMAC to the IPMMU
* R-Car D3 (r8a77995) based Draak board: Sort device nodes

* R-Car V3H (r8a77980) based V3HSK board:
- Move lvds0 node to restore sort-order of file
* R-Car V3H (r8a77980) SoC:
- Add RWDT, CSI2 and VIN, Cortex-A53 PMU nodes
- Move IPMMU and CAN clock nodes to restore sort-order of file

* R-Car V3M (r8a77970) SoC:
- Add MMC nodes
- Move CAN clock node to restore sort-order of file
* R-Car V3M (r8a77970) based V3MSK board: Add eMMC support
* R-Car V3H (r8a77980) based Condor board: Add PCIe, DU, LVDS and HDMI support

* RZ/G2M (r8a774a1) SoC:
- Initial device tree
- Add SYS-DMAC, SCIF, HSCIF, INTC-EX, EtherAVB, RWDT, pinctl, GPIO,
SDHI, I2C, IIC-DVFS, thermal, IPMMU, MSIOF, Cortex-A53 CPU core,
PWM, Audio, FCPF, FCPV, USB2.0, USB-DMAC, HSUSB and USB3.0 device nodes

* tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (58 commits)
arm64: dts: r8a77965: add FDP1 device nodes
arm64: dts: renesas: draak: Sort device nodes
arm64: dts: renesas: enable SDR104 on R-Car Gen3
arm64: dts: renesas: r8a77990: Add SYS-DMAC device nodes
arm64: dts: renesas: r8a77990: Add I2C device nodes
arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes
arm64: dts: renesas: r8a77990: Add all MSIOF nodes
arm64: dts: renesas: r8a7795: Move arm_cc630p node
arm64: dts: renesas: r8a77990: Add BRG support to SCIF2
arm64: dts: renesas: r8a77990: Use CPG/MSSR and SYSC binding definitions
arm64: dts: renesas: salvator-xs: Improve SATA switch settings comments
arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1
arm64: dts: renesas: r8a77965: Fix HS-USB compatible
arm64: dts: renesas: r8a77965: Move timer node
arm64: dts: renesas: v3hsk: Move lvds0 node
arm64: dts: renesas: Fix whitespace around assignments
arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device tree
arm64: dts: renesas: condor: add PCIe support
arm64: dts: renesas: r8a77980: add PCIe support
arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm64: dts: renesas: r8a779{7|8}0: add CMT support

Describe CMTs in the R8A779{7|8}0 device trees.

Based on the original (and large) patches by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <v

arm64: dts: renesas: r8a779{7|8}0: add CMT support

Describe CMTs in the R8A779{7|8}0 device trees.

Based on the original (and large) patches by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77980: Attach the SYS-DMAC to the IPMMU

For R-Car V3H hook up SYS-DMAC1 and SYS-DMAC2 to IPMMU-DS1 to match
information in the R-Car Gen3 Rev.1.00 (April 2018) datasheet.

Si

arm64: dts: renesas: r8a77980: Attach the SYS-DMAC to the IPMMU

For R-Car V3H hook up SYS-DMAC1 and SYS-DMAC2 to IPMMU-DS1 to match
information in the R-Car Gen3 Rev.1.00 (April 2018) datasheet.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core

Pull more y2038 work from Arnd Bergman:

y2038: convert more syscalls

Here is another set of syst

Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core

Pull more y2038 work from Arnd Bergman:

y2038: convert more syscalls

Here is another set of system call changes to prepare the change over to
64-bit time_t. As before, the strategy is to change system calls that
take a 'struct timespec' argument over to 'struct __kernel_timespec',
which for now is defined to be the same but will get redefined to use a
64-bit time_t argument once we are ready to modify the system call tables.

The major change from previous patches is that the plan is no longer
to directly use the 'compat' system calls for providing compatibility
with the existing 32-bit time_t based entry points. Instead, we rename
the compat code to something that makes more sense on 32-bit architectures,
e.g. compat_timespec becomes old_timespec32.

With the renamed types in place, change over the 'stat' and 'utimes'
families of system calls, sched_rr_get_interval, recvmmsg and
rt_sigtimedwait. Another series for poll, select and io_pgetevents is
currently being tested.

show more ...

arm64: dts: renesas: Fix whitespace around assignments

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: updated for a few new cases]
Signed-off-by: Simon Horman <horms+renesas@ver

arm64: dts: renesas: Fix whitespace around assignments

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
[simon: updated for a few new cases]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77980: add PCIe support

Describe the PCIe PHY, PCIEC, and PCIe bus clock in the R8A77980 device
tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-of

arm64: dts: renesas: r8a77980: add PCIe support

Describe the PCIe PHY, PCIEC, and PCIe bus clock in the R8A77980 device
tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77980: add CSI2/VIN support

Describe the CSI2 and VIN (and their interconnections) in the R8A77980
device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedde

arm64: dts: renesas: r8a77980: add CSI2/VIN support

Describe the CSI2 and VIN (and their interconnections) in the R8A77980
device tree.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a779{7|8}0: move CAN clock node

The CAN clock node should precede the "cpus" node in the R8A779{7|8}0
device trees, according to the alphanumeric node sorting rule...

Sign

arm64: dts: renesas: r8a779{7|8}0: move CAN clock node

The CAN clock node should precede the "cpus" node in the R8A779{7|8}0
device trees, according to the alphanumeric node sorting rule...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77980: move IPMMU nodes

The IPMMU nodes should follow the GEther node, not the CAN-FD node,
according to the <unit-address> part of the startng IPMMU-DS1 node.
While moving t

arm64: dts: renesas: r8a77980: move IPMMU nodes

The IPMMU nodes should follow the GEther node, not the CAN-FD node,
according to the <unit-address> part of the startng IPMMU-DS1 node.
While moving the nodes, also do sort them by label alphanumerically...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support

Describe the performance monitor unit (PMU) for the Cortex-A53 cores in
the R8A77980 SoC's device tree.

Based on the original (and large) p

arm64: dts: renesas: r8a77980: add Cortex-A53 PMU support

Describe the performance monitor unit (PMU) for the Cortex-A53 cores in
the R8A77980 SoC's device tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'v4.19-rc2' into next-general

Sync to Linux 4.19-rc2 for downstream developers.

Merge tag 'v4.19-rc1' into asoc-4.19

Linux 4.19-rc1

Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2

Merge drm/drm-next into drm-misc-next

Now that 4.19-rc1 is cut, backmerge it into -misc-next.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

arm64: dts: renesas: Include R-Car product name in DTSI files

Browsing the DTS for all the R-Car SoCs with similar part numbers
makes my head hurt, so to improve the user friendliness of the
DTS cod

arm64: dts: renesas: Include R-Car product name in DTSI files

Browsing the DTS for all the R-Car SoCs with similar part numbers
makes my head hurt, so to improve the user friendliness of the
DTS code base include R-Car product name in each DTSI file.

Product names are derived from
Documentation/devicetree/bindings/arm/shmobile.txt

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77980: add RWDT support

Describe RWDT in the R8A77980 SoC device tree.

Enable RWDT on the Condor and V3H Starter Kit boards.

Based on the original (and large) patch by Vlad

arm64: dts: renesas: r8a77980: add RWDT support

Describe RWDT in the R8A77980 SoC device tree.

Enable RWDT on the Condor and V3H Starter Kit boards.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board
types.

New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
and PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).

New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop

In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor
variants of boards/platforms"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
arm64: dts: sdm845: Add tsens nodes
arm64: dts: msm8996: thermal: Initialise via DT and add second controller
arm64: dts: sprd: Add one suspend timer
arm64: dts: sprd: Add SC27XX ADC device
arm64: dts: sprd: Add SC27XX eFuse device
arm64: dts: sprd: Add SC27XX vibrator device
arm64: dts: sprd: Add SC27XX breathing light controller device
arm64: dts: meson-axg: add spdif-dit codec
arm64: dts: meson-axg: add lineout codec
arm64: dts: meson-axg: add linein codec
arm64: dts: meson-axg: add tdm interfaces
arm64: dts: meson-axg: add tdmout formatters
arm64: dts: meson-axg: add tdmin formatters
arm64: dts: meson-axg: add spdifout
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
ARM: dts: aspeed: Add coprocessor interrupt controller
arm64: dts: meson-axg: add audio arb reset controller
arm64: dts: meson-axg: add usb power regulator
...

show more ...

Merge branch 'for-4.19/cougar' into for-linus

New device support for hid-cougar

Merge branch 'iomap-write' into linux-gfs2/for-next

Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_bl

Merge branch 'iomap-write' into linux-gfs2/for-next

Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_block_map. Implement iomap write support for buffered and
direct I/O. Simplify some of the existing code and eliminate code that
is no longer used:

gfs2: Remove gfs2_write_{begin,end}
gfs2: iomap direct I/O support
gfs2: gfs2_extent_length cleanup
gfs2: iomap buffered write support
gfs2: Further iomap cleanups

This is based on the following changes on the xfs 'iomap-4.19-merge'
branch:

iomap: add private pointer to struct iomap
iomap: add a page_done callback
iomap: generic inline data handling
iomap: complete partial direct I/O writes synchronously
iomap: mark newly allocated buffer heads as new
fs: factor out a __generic_write_end helper

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Re

Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Remove non-existing STBE region from Ether-AVB node in DT of
R-Car E3 (r8a77990) SoC

Cleanups:

* Consistently use rwdt as label for Renesas Watchdog Timer devices
* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards

Enhancements:

* Describe in DT:
- INTC-EX of R-Car V3H (r8a77980) SoC
- USB3.0 of R-Car E3 (r8a77980) SoC
- All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
Previously only SCIF2, used as the debug consile, was described.
- All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
E3 (r8a77990) SoCs
* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards

* tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77980: add INTC-EX support
arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
arm64: dts: renesas: Unify the labels for RWDT
arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
arm64: dts: renesas: r8a77990: Remove non-existing STBE region

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm64: dts: renesas: r8a77980: add INTC-EX support

Describe the INTC-EX interrupt controller in the R8A77980 device tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by

arm64: dts: renesas: r8a77980: add INTC-EX support

Describe the INTC-EX interrupt controller in the R8A77980 device tree.

Based on the original (and large) patch by Vladimir Barinov.

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes

Add IPMMU device nodes for the R-Car M3-N (r8a77965),
V3H (r8a77980) and E3 (r8a77990) SoCs.

* The r8a77965 IPMMU is quite similar to

arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes

Add IPMMU device nodes for the R-Car M3-N (r8a77965),
V3H (r8a77980) and E3 (r8a77990) SoCs.

* The r8a77965 IPMMU is quite similar to r8a7796 however VP0
has been added and PV1 has been removed. Also the IMSSTR
bit assignment has been reworked.

* The r8a77980 IPMMU is quite similar to r8a77970 however VC0
has been added. The IMSSTR bit assignment has also been
reworked. Power domains are also quite different however the
the documentation is rather unclear about this topic.

Until we know better VC0 gets assigned to R8A77980_PD_ALWAYS_ON.

* The r8a77990 IPMMU is similar to r8a77995. Power domains are
however different and the public documentation is still unclear.

Based on preliminary information from the hardware team the R-Car E3
SoC comes with an IPMMU-VP0 device in an Always-on power domain and
the IPMMU-VC0 is placed as expected in the A3VC power domain.

Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.19

* All applicable R-Car Gen 3 SoCs

Merge tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.19

* All applicable R-Car Gen 3 SoCs
- Correct VSPD registers range
- Convert R-Car Gen3 SoC and board DT files to SPDX identifiers

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Salvator-X and Salvator-XS boards
+ Describe HSCIF1 device
+ Correct I2C ch4 clock to 400kHz
- Salvator-X, Salvator-XS and ULCB boards
+ Add sdhi2_ds pin group to SDHI2 pinctrl groups

* R-Car H3 (r8a7795) SoC
- Describe CryptoCAL (CCREE) device

* R-Car M3-W (r8a7796) SoC
- Describe PCIe devices
- Describe HSCIF nodes

* R-Car M3-N (r8a77965) SoC
- Describe PCIe devices
- Use CPG MSSR symbols instead of numeric indicies

* R-Car D3 (r8a77995) SoC
- Describe Thermal device
- Describe MSIOF devices
- Add power domains to description of IPMMU devices
- Do not use deprecated renesas,gpio-rcar compat string
- Describe HDMI and CVBS input in DT of R-Car Gen3 D3 Draak board

* R-Car V3H (r8a77980) SoC
- Describe secondary CA53 CPU cores, and GPIO and
interconected FCPVD0, VSPD0, DU, and LVDS0 devices
- Enable ethernet on V3HSK board
- Specify Ethernet PHY IRQs in the DT of the Condor and V3HSK boards.
This is possible now that GPIO support is present.
Previously phylib had to resort to polling.
- Enable I2C0 on Condor board

* R-Car E3 (r8a77990)
- Enable Watchdog timer and USB2.0 host on Ebisu board
- Enable secondary CA53 CPU core

* tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
arm64: dts: renesas: r8a77995: Add MSIOF device nodes
arm64: dts: renesas: salvator-common: Add HSCIF1 device support
arm64: dts: renesas: r8a77980: add FCPVD/VSPD/DU/LVDS support
arm64: dts: renesas: condor/v3hsk: specify Ethernet PHY IRQs
arm64: dts: renesas: r8a77965: Add PCIe device nodes
arm64: dts: renesas: Fix VSPD registers range
arm64: dts: renesas: convert to SPDX identifiers
arm64: dts: renesas: r8a77980: add GPIO support
arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board
arm64: dts: renesas: r8a7796: Add PCIe device nodes
arm64: dts: renesas: r8a77990: Add secondary CA53 CPU core
arm64: dts: renesas: r8a77990: ebisu: Enable watchdog timer
arm64: dts: renesas: condor: add I2C0 support
arm64: dts: renesas: r8a77980: add I2C support
arm64: dts: renesas: salvator-x(s): Update I2C ch4 clock to 400kHz
arm64: dts: renesas: Add sdhi2_ds pin group to SDHI2 pinctrl groups
arm64: dts: renesas: r8a77965: Add all HSCIF nodes
arm64: dts: renesas: r8a77965: Use r8a77965-cpg-mssr binding definitions
arm64: dts: renesas: r8a7795: add ccree to device tree
arm64: dts: renesas: r8a77965: Add Watchdog Timer controller node using RCLK Watchdog Timer
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...