/linux/drivers/clk/sunxi-ng/ |
H A D | ccu-suniv-f1c100s.c | 33 .m = _SUNXI_CCU_DIV(0, 2), 38 .reg = 0x000, 53 #define SUNIV_PLL_AUDIO_REG 0x008 56 "osc24M", 0x008, 58 0, 5, /* M */ 64 "osc24M", 0x010, 66 0, 4, /* M */ 69 270000000, /* frac rate 0 */ 76 "osc24M", 0x018, 78 0, 4, /* M */ [all …]
|
H A D | ccu-sun8i-h3.c | 29 "osc24M", 0x000, 32 0, 2, /* M */ 50 #define SUN8I_H3_PLL_AUDIO_REG 0x008 53 { .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 }, 54 { .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 }, 58 "osc24M", 0x008, 60 0, 5, /* M */ 62 0x284, BIT(31), 68 "osc24M", 0x0010, 72 0, 4, /* M */ [all …]
|
H A D | ccu-sun8i-r40.c | 33 .m = _SUNXI_CCU_DIV(0, 2), 36 .reg = 0x000, 56 #define SUN8I_R40_PLL_AUDIO_REG 0x008 59 { .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 }, 60 { .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 }, 64 "osc24M", 0x008, 66 0, 5, /* M */ 68 0x284, BIT(31), 74 "osc24M", 0x0010, 78 0, 4, /* M */ [all …]
|
H A D | ccu-sun50i-a64.c | 31 .m = _SUNXI_CCU_DIV(0, 2), 34 .reg = 0x000, 54 #define SUN50I_A64_PLL_AUDIO_REG 0x008 57 { .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 }, 58 { .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 }, 62 "osc24M", 0x008, 64 0, 5, /* M */ 66 0x284, BIT(31), 72 "osc24M", 0x010, 76 0, 4, /* M */ [all …]
|
H A D | ccu-sun8i-a83t.c | 24 #define CCU_SUN8I_A83T_LOCK_REG 0x20c 33 #define SUN8I_A83T_PLL_C0CPUX_REG 0x000 34 #define SUN8I_A83T_PLL_C1CPUX_REG 0x004 38 .lock = BIT(0), 39 .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0), 53 .mult = _SUNXI_CCU_MULT_OFFSET_MIN_MAX(8, 8, 0, 12, 0), 68 * which is d1 = 0, d2 = 1. 70 #define SUN8I_A83T_PLL_AUDIO_REG 0x008 74 { .rate = 45158400, .pattern = 0xc00121ff, .m = 29, .n = 54 }, 75 { .rate = 49152000, .pattern = 0xc000e147, .m = 30, .n = 61 }, [all …]
|
H A D | ccu-sun6i-a31.c | 33 "osc24M", 0x000, 36 0, 2, /* M */ 39 0); 53 #define SUN6I_A31_PLL_AUDIO_REG 0x008 56 { .rate = 22579200, .pattern = 0xc0010d84, .m = 8, .n = 7 }, 57 { .rate = 24576000, .pattern = 0xc000ac02, .m = 14, .n = 14 }, 61 "osc24M", 0x008, 63 0, 5, /* M */ 65 0x284, BIT(31), 71 "osc24M", 0x010, [all …]
|
/linux/drivers/ssb/ |
H A D | bridge_pcmcia_80211.c | 21 PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x448), 22 PCMCIA_DEVICE_MANF_CARD(0x2D0, 0x476), 32 int res = 0; in ssb_host_pcmcia_probe() 44 dev->resource[2]->start = 0; in ssb_host_pcmcia_probe() 47 if (res != 0) in ssb_host_pcmcia_probe() 50 res = pcmcia_map_mem_page(dev, dev->resource[2], 0); in ssb_host_pcmcia_probe() 51 if (res != 0) in ssb_host_pcmcia_probe() 58 if (res != 0) in ssb_host_pcmcia_probe() 66 return 0; in ssb_host_pcmcia_probe()
|
/linux/drivers/clk/mediatek/ |
H A D | clk-mt8135-apmixedsys.c | 38 PLL(CLK_APMIXED_ARMPLL1, "armpll1", 0x200, 0x218, 0x80000000, 0, 21, 0x204, 24, 0x0, 0x204, 0), 39 PLL(CLK_APMIXED_ARMPLL2, "armpll2", 0x2cc, 0x2e4, 0x80000000, 0, 21, 0x2d0, 24, 0x0, 0x2d0, 0), 40 …PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x21c, 0x234, 0xf0000000, HAVE_RST_BAR, 21, 0x21c, 6, 0x0, 0x2… 41 …PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x238, 0x250, 0xf3000000, HAVE_RST_BAR, 7, 0x238, 6, 0x0, 0x23… 42 …PLL(CLK_APMIXED_MMPLL, "mmpll", 0x254, 0x26c, 0xf0000000, HAVE_RST_BAR, 21, 0x254, 6, 0x0, 0x258, … 43 PLL(CLK_APMIXED_MSDCPLL, "msdcpll", 0x278, 0x290, 0x80000000, 0, 21, 0x278, 6, 0x0, 0x27c, 0), 44 PLL(CLK_APMIXED_TVDPLL, "tvdpll", 0x294, 0x2ac, 0x80000000, 0, 31, 0x294, 6, 0x0, 0x298, 0), 45 PLL(CLK_APMIXED_LVDSPLL, "lvdspll", 0x2b0, 0x2c8, 0x80000000, 0, 21, 0x2b0, 6, 0x0, 0x2b4, 0), 46 PLL(CLK_APMIXED_AUDPLL, "audpll", 0x2e8, 0x300, 0x80000000, 0, 31, 0x2e8, 6, 0x2f8, 0x2ec, 0), 47 PLL(CLK_APMIXED_VDECPLL, "vdecpll", 0x304, 0x31c, 0x80000000, 0, 21, 0x2b0, 6, 0x0, 0x308, 0), [all …]
|
H A D | clk-mt8173-apmixedsys.c | 17 #define REGOFF_REF2USB 0x8 18 #define REGOFF_HDMI_REF 0x40 52 { .div = 0, .freq = MT8173_PLL_FMAX }, 61 PLL(CLK_APMIXED_ARMCA15PLL, "armca15pll", 0x200, 0x20c, 0, PLL_AO, 62 21, 0x204, 24, 0x0, 0x204, 0), 63 PLL(CLK_APMIXED_ARMCA7PLL, "armca7pll", 0x210, 0x21c, 0, PLL_AO, 64 21, 0x214, 24, 0x0, 0x214, 0), 65 PLL(CLK_APMIXED_MAINPLL, "mainpll", 0x220, 0x22c, 0xf0000100, HAVE_RST_BAR, 21, 66 0x220, 4, 0x0, 0x224, 0), 67 PLL(CLK_APMIXED_UNIVPLL, "univpll", 0x230, 0x23c, 0xfe000000, HAVE_RST_BAR, 7, [all …]
|
/linux/drivers/phy/qualcomm/ |
H A D | phy-qcom-qmp-qserdes-txrx-v6_n4.h | 9 #define QSERDES_V6_N4_TX_CLKBUF_ENABLE 0x08 10 #define QSERDES_V6_N4_TX_TX_EMP_POST1_LVL 0x0c 11 #define QSERDES_V6_N4_TX_TX_DRV_LVL 0x14 12 #define QSERDES_V6_N4_TX_RESET_TSYNC_EN 0x1c 13 #define QSERDES_V6_N4_TX_PRE_STALL_LDO_BOOST_EN 0x20 14 #define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_TX 0x30 15 #define QSERDES_V6_N4_TX_RES_CODE_LANE_OFFSET_RX 0x34 16 #define QSERDES_V6_N4_TX_TRANSCEIVER_BIAS_EN 0x48 17 #define QSERDES_V6_N4_TX_HIGHZ_DRVR_EN 0x4c 18 #define QSERDES_V6_N4_TX_TX_POL_INV 0x50 [all …]
|
/linux/Documentation/devicetree/bindings/interrupt-controller/ |
H A D | marvell,mpic.yaml | 58 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
|
/linux/arch/arm/boot/dts/nxp/imx/ |
H A D | imxrt1050-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0 18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0 19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1 20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0 21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0 22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0 24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0 25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0 26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1 [all …]
|
H A D | imx53-pinfunc.h | 13 #define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0 14 #define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0 15 #define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0 16 #define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0 17 #define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0 18 #define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0 19 #define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0 20 #define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0 21 #define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0 22 #define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0 [all …]
|
H A D | imx35-pinfunc.h | 13 #define MX35_PAD_CAPTURE__GPT_CAPIN1 0x004 0x328 0x000 0x0 0x0 14 #define MX35_PAD_CAPTURE__GPT_CMPOUT2 0x004 0x328 0x000 0x1 0x0 15 #define MX35_PAD_CAPTURE__CSPI2_SS1 0x004 0x328 0x7f4 0x2 0x0 16 #define MX35_PAD_CAPTURE__EPIT1_EPITO 0x004 0x328 0x000 0x3 0x0 17 #define MX35_PAD_CAPTURE__CCM_CLK32K 0x004 0x328 0x7d0 0x4 0x0 18 #define MX35_PAD_CAPTURE__GPIO1_4 0x004 0x328 0x850 0x5 0x0 19 #define MX35_PAD_COMPARE__GPT_CMPOUT1 0x008 0x32c 0x000 0x0 0x0 20 #define MX35_PAD_COMPARE__GPT_CAPIN2 0x008 0x32c 0x000 0x1 0x0 21 #define MX35_PAD_COMPARE__GPT_CMPOUT3 0x008 0x32c 0x000 0x2 0x0 22 #define MX35_PAD_COMPARE__EPIT2_EPITO 0x008 0x32c 0x000 0x3 0x0 [all …]
|
/linux/arch/x86/include/uapi/asm/ |
H A D | e820.h | 4 #define E820MAP 0x2d0 /* our map */ 29 #define E820NR 0x1e8 /* # entries in E820MAP */ 70 #define ISA_START_ADDRESS 0xa0000 71 #define ISA_END_ADDRESS 0x100000 73 #define BIOS_BEGIN 0x000a0000 74 #define BIOS_END 0x00100000 76 #define BIOS_ROM_BASE 0xffe00000 77 #define BIOS_ROM_END 0xffffffff
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mn-pinfunc.h | 14 …ne MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0 15 …ne MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3 16 …ne MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0 17 …ne MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3 18 …ne MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 19 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0 20 …ne MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 21 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 22 …ne MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 23 …ne MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 [all …]
|
H A D | imx8mp-pinfunc.h | 13 #define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0 14 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 15 #define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 16 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 17 #define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0 18 #define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0 19 #define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 20 #define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 21 #define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0 22 #define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0 [all …]
|
/linux/tools/perf/arch/powerpc/util/ |
H A D | book3s_hcalls.h | 9 {0x4, "H_REMOVE"}, \ 10 {0x8, "H_ENTER"}, \ 11 {0xc, "H_READ"}, \ 12 {0x10, "H_CLEAR_MOD"}, \ 13 {0x14, "H_CLEAR_REF"}, \ 14 {0x18, "H_PROTECT"}, \ 15 {0x1c, "H_GET_TCE"}, \ 16 {0x20, "H_PUT_TCE"}, \ 17 {0x24, "H_SET_SPRG0"}, \ 18 {0x28, "H_SET_DABR"}, \ [all …]
|
/linux/drivers/staging/rtl8712/ |
H A D | rtl8712_spec.h | 17 #define RTL8712_IOBASE_TXPKT 0x10200000 /*IOBASE_TXPKT*/ 18 #define RTL8712_IOBASE_RXPKT 0x10210000 /*IOBASE_RXPKT*/ 19 #define RTL8712_IOBASE_RXCMD 0x10220000 /*IOBASE_RXCMD*/ 20 #define RTL8712_IOBASE_TXSTATUS 0x10230000 /*IOBASE_TXSTATUS*/ 21 #define RTL8712_IOBASE_RXSTATUS 0x10240000 /*IOBASE_RXSTATUS*/ 22 #define RTL8712_IOBASE_IOREG 0x10250000 /*IOBASE_IOREG ADDR*/ 23 #define RTL8712_IOBASE_SCHEDULER 0x10260000 /*IOBASE_SCHEDULE*/ 25 #define RTL8712_IOBASE_TRXDMA 0x10270000 /*IOBASE_TRXDMA*/ 26 #define RTL8712_IOBASE_TXLLT 0x10280000 /*IOBASE_TXLLT*/ 27 #define RTL8712_IOBASE_WMAC 0x10290000 /*IOBASE_WMAC*/ [all …]
|
/linux/arch/sh/include/mach-sdk7786/mach/ |
H A D | fpga.h | 9 #define SRSTR 0x000 10 #define SRSTR_MAGIC 0x1971 /* Fixed magical read value */ 12 #define INTASR 0x010 13 #define INTAMR 0x020 14 #define MODSWR 0x030 15 #define INTTESTR 0x040 16 #define SYSSR 0x050 17 #define NRGPR 0x060 19 #define NMISR 0x070 20 #define NMISR_MAN_NMI BIT(0) [all …]
|
/linux/arch/s390/boot/ |
H A D | ipl_data.c | 15 psw_t32 ipl_psw; /* 0x0000 */ 16 struct ccw0 ccwpgm[2]; /* 0x0008 */ 17 u8 fill[56]; /* 0x0018 */ 18 struct ccw0 ccwpgmcc[20]; /* 0x0050 */ 19 u8 pad_0xf0[0x01a0-0x00f0]; /* 0x00f0 */ 20 psw_t restart_psw; /* 0x01a0 */ 21 psw_t external_new_psw; /* 0x01b0 */ 22 psw_t svc_new_psw; /* 0x01c0 */ 23 psw_t program_new_psw; /* 0x01d0 */ 24 psw_t mcck_new_psw; /* 0x01e0 */ [all …]
|
/linux/drivers/media/pci/tw686x/ |
H A D | tw686x-regs.h | 6 a0 + 8, a0 + 0xa, a0 + 0xc, a0 + 0xe}) 7 #define REG8_8(a0) ((const u16[8]) { a0, a0 + 8, a0 + 0x10, a0 + 0x18, \ 8 a0 + 0x20, a0 + 0x28, a0 + 0x30, \ 9 a0 + 0x38}) 10 #define INT_STATUS 0x00 11 #define PB_STATUS 0x01 12 #define DMA_CMD 0x02 13 #define VIDEO_FIFO_STATUS 0x03 14 #define VIDEO_CHANNEL_ID 0x04 15 #define VIDEO_PARSER_STATUS 0x05 [all …]
|
/linux/drivers/media/pci/tw68/ |
H A D | tw68-reg.h | 23 #define TW68_DMAC 0x000 24 #define TW68_DMAP_SA 0x004 25 #define TW68_DMAP_EXE 0x008 26 #define TW68_DMAP_PP 0x00c 27 #define TW68_VBIC 0x010 28 #define TW68_SBUSC 0x014 29 #define TW68_SBUSSD 0x018 30 #define TW68_INTSTAT 0x01C 31 #define TW68_INTMASK 0x020 32 #define TW68_GPIOC 0x024 [all …]
|
/linux/drivers/crypto/intel/qat/qat_common/ |
H A D | adf_gen4_hw_data.h | 12 #define ADF_GEN4_BAR_MASK (BIT(0) | BIT(2) | BIT(4)) 13 #define ADF_GEN4_SRAM_BAR 0 21 #define ADF_GEN4_FUSECTL0_OFFSET 0x2C8 22 #define ADF_GEN4_FUSECTL1_OFFSET 0x2CC 23 #define ADF_GEN4_FUSECTL2_OFFSET 0x2D0 24 #define ADF_GEN4_FUSECTL3_OFFSET 0x2D4 25 #define ADF_GEN4_FUSECTL4_OFFSET 0x2D8 26 #define ADF_GEN4_FUSECTL5_OFFSET 0x2DC 29 #define ADF_GEN4_ACCELERATORS_MASK 0x1 34 #define ADF_GEN4_SMIAPF_RP_X0_MASK_OFFSET 0x41A040 [all …]
|
/linux/drivers/video/fbdev/via/ |
H A D | accel.h | 14 #define MMIO_VGABASE 0x8000 15 #define MMIO_CR_READ (MMIO_VGABASE + 0x3D4) 16 #define MMIO_CR_WRITE (MMIO_VGABASE + 0x3D5) 17 #define MMIO_SR_READ (MMIO_VGABASE + 0x3C4) 18 #define MMIO_SR_WRITE (MMIO_VGABASE + 0x3C5) 21 #define HW_Cursor_ON 0 27 #define VIA_MMIO_BLTBASE 0x200000 28 #define VIA_MMIO_BLTSIZE 0x200000 31 #define VIA_REG_GECMD 0x000 32 #define VIA_REG_GEMODE 0x004 [all …]
|