/linux/Documentation/devicetree/bindings/pinctrl/ |
H A D | lantiq,pinctrl-xway.txt | 48 clkout1, clkout2, mdio, dfe led0, dfe led1, ephy led0, ephy led1, ephy led2 58 gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, 69 spi_cs6, asc0, asc0 cts rts, stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, 84 stp, nmi, gpt1, gpt2, gpt3, clkout0, clkout1, clkout2, clkout3, gnt1,
|
H A D | cirrus,lochnagar.yaml | 124 clk-22m5792, xmos-mclk, gf-clkout1, gf-mclk1,
|
/linux/arch/arm/boot/dts/ti/omap/ |
H A D | am335x-base0033.dts | 46 AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */ 71 AM33XX_PADCONF(AM335X_PIN_XDMA_EVENT_INTR0, PIN_OUTPUT, MUX_MODE3) /* xdma_event_intr0.clkout1 */
|
H A D | am43xx-clocks.dtsi | 804 clkout1_osc_div_ck: clock-clkout1-osc-div-ck { 814 clkout1_src2_mux_ck: clock-clkout1-src2-mux-ck { 824 clkout1_src2_pre_div_ck: clock-clkout1-src2-pre-div-ck { 834 clkout1_src2_post_div_ck: clock-clkout1-src2-post-div-ck { 845 clkout1_mux_ck: clock-clkout1-mux-ck { 855 clkout1_ck: clock-clkout1-ck {
|
H A D | am437x-sk-evm.dts | 259 clkout1_pin: clkout1-pins { 261 0x270 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* XDMA_EVENT_INTR0/CLKOUT1 */
|
/linux/drivers/clk/ |
H A D | clk-lochnagar.c | 106 LN1_CLK(GF_CLKOUT1, "ln-gf-clkout1", GF_AIF1), 113 LN2_CLK(GF_CLKOUT1, "ln-gf-clkout1"),
|
H A D | clk-rk808.c | 169 init.name = "rk808-clkout1"; in rk808_clkout_probe()
|
H A D | clk-max9485.c | 229 .name = "clkout1",
|
/linux/Documentation/devicetree/bindings/clock/ |
H A D | maxim,max9485.txt | 25 If not explicitly set, the output names are "mclkout", "clkout", "clkout1"
|
H A D | stericsson,u8500-clks.yaml | 122 possible values are 0 (CLKOUT1) and 1 (CLKOUT2).
|
H A D | ti,lmk04832.yaml | 203 clkout1@1 {
|
/linux/drivers/pinctrl/ |
H A D | pinctrl-xway.c | 199 GRP_MUX("clkout1", CGU, ase_pins_clkout1), 211 static const char * const ase_cgu_grps[] = {"clkout0", "clkout1", 362 GRP_MUX("clkout1", CGU, danube_pins_clkout1), 384 static const char * const danube_cgu_grps[] = {"clkout0", "clkout1", 570 GRP_MUX("clkout1", CGU, xrx100_pins_clkout1), 595 static const char * const xrx100_cgu_grps[] = {"clkout0", "clkout1", 810 GRP_MUX("clkout1", CGU, xrx200_pins_clkout1), 841 static const char * const xrx200_cgu_grps[] = {"clkout0", "clkout1", 1010 /* CLKOUT1 is not available on xrX300 */
|
/linux/arch/arm64/boot/dts/rockchip/ |
H A D | px30-engicam-px30-core.dtsi | 56 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
H A D | rk3399pro-vmarc-som.dtsi | 78 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
H A D | rk3326-anbernic-rg351m.dtsi | 166 clock-output-names = "rk808-clkout1", "xin32k";
|
H A D | rk3399-evb.dts | 184 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
H A D | rk3566-radxa-cm3.dtsi | 125 clock-output-names = "rk817-clkout1", "rk817-clkout2";
|
/linux/arch/arm64/boot/dts/freescale/ |
H A D | imx8mp-dhcom-pdk2.dts | 259 * GPIO_M is connected to CLKOUT1.
|
/linux/sound/soc/sh/rcar/ |
H A D | adg.c | 17 #define CLKOUT1 1 macro 73 [CLKOUT1] = "audio_clkout1",
|
/linux/arch/arm/boot/dts/rockchip/ |
H A D | rk3288-vmarc-som.dtsi | 61 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
H A D | rv1126-edgeble-neu2.dtsi | 63 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
H A D | rv1126-sonoff-ihost.dtsi | 61 clock-output-names = "rk808-clkout1", "rk808-clkout2";
|
/linux/drivers/clk/ux500/ |
H A D | clk-prcmu.c | 368 if (!strcmp(name, "clkout1")) in clk_reg_prcmu_clkout()
|
/linux/Documentation/devicetree/bindings/mfd/ |
H A D | rockchip,rk817.yaml | 215 clock-output-names = "rk808-clkout1", "xin32k";
|
/linux/include/linux/mfd/ |
H A D | dbx500-prcmu.h | 88 /* These are only valid for CLKOUT1: */
|