/freebsd/sys/arm/include/ |
H A D | cpuinfo.h | 33 #define CPU_IMPLEMENTER_ARM 0x41 34 #define CPU_IMPLEMENTER_QCOM 0x51 35 #define CPU_IMPLEMENTER_MRVL 0x56 38 #define CPU_ARCH_ARM1176 0xB76 39 #define CPU_ARCH_CORTEX_A5 0xC05 40 #define CPU_ARCH_CORTEX_A7 0xC07 41 #define CPU_ARCH_CORTEX_A8 0xC08 42 #define CPU_ARCH_CORTEX_A9 0xC09 43 #define CPU_ARCH_CORTEX_A12 0xC0D 44 #define CPU_ARCH_CORTEX_A15 0xC0F [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/crypto/ |
H A D | qcom-qce.yaml | 159 reg = <0xfd45a000 0x6000>; 166 iommus = <&apps_smmu 0x584 0x0011>, 167 <&apps_smmu 0x586 0x0011>, 168 <&apps_smmu 0x594 0x0011>, 169 <&apps_smmu 0x59 [all...] |
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imx50-pinfunc.h | 13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0 14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0 15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0 16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0 17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0 18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0 19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0 20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0 21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0 22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0 [all …]
|
H A D | imx6dl-pinfunc.h | 13 #define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0 14 #define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0 15 #define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0 16 #define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0 17 #define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0 18 #define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0 19 #define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0 20 #define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0 21 #define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0 22 #define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0 [all …]
|
H A D | imx6sl-pinfunc.h | 13 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 14 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 15 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 16 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 17 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 18 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 19 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 20 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 21 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 22 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 [all …]
|
H A D | imxrt1050-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0 18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0 19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1 20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0 21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0 22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0 24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0 25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0 26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1 [all …]
|
H A D | imx35-pinfunc.h | 13 #define MX35_PAD_CAPTURE__GPT_CAPIN1 0x004 0x328 0x000 0x0 0x0 14 #define MX35_PAD_CAPTURE__GPT_CMPOUT2 0x004 0x328 0x000 0x1 0x0 15 #define MX35_PAD_CAPTURE__CSPI2_SS1 0x004 0x328 0x7f4 0x2 0x0 16 #define MX35_PAD_CAPTURE__EPIT1_EPITO 0x004 0x328 0x000 0x3 0x0 17 #define MX35_PAD_CAPTURE__CCM_CLK32K 0x004 0x328 0x7d0 0x4 0x0 18 #define MX35_PAD_CAPTURE__GPIO1_4 0x004 0x328 0x850 0x5 0x0 19 #define MX35_PAD_COMPARE__GPT_CMPOUT1 0x008 0x32c 0x000 0x0 0x0 20 #define MX35_PAD_COMPARE__GPT_CAPIN2 0x008 0x32c 0x000 0x1 0x0 21 #define MX35_PAD_COMPARE__GPT_CMPOUT3 0x008 0x32c 0x000 0x2 0x0 22 #define MX35_PAD_COMPARE__EPIT2_EPITO 0x008 0x32c 0x000 0x3 0x0 [all …]
|
H A D | imxrt1170-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX 0x000 0x040 0x0 0x0 0x0 18 #define IOMUXC_GPIO_LPSR_00_MIC_CLK 0x000 0x040 0x0 0x1 0x0 19 #define IOMUXC_GPIO_LPSR_00_MQS_RIGHT 0x000 0x040 0x0 0x2 0x0 20 #define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO 0x000 0x040 0x0 0x3 0x0 21 #define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00 0x000 0x040 0x0 0x5 0x0 22 #define IOMUXC_GPIO_LPSR_00_LPUART12_TXD 0x000 0x040 0x0B0 0x6 0x0 23 #define IOMUXC_GPIO_LPSR_00_SAI4_MCLK 0x000 0x040 0x0C8 0x7 0x0 24 #define IOMUXC_GPIO_LPSR_00_GPIO12_IO00 0x000 0x040 0x0 0xA 0x0 26 #define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX 0x004 0x044 0x080 0x0 0x0 [all …]
|
H A D | imx51-pinfunc.h | 13 #define MX51_PAD_EIM_D16__AUD4_RXFS 0x05c 0x3f0 0x000 0x5 0x0 14 #define MX51_PAD_EIM_D16__AUD5_TXD 0x05c 0x3f0 0x8d8 0x7 0x0 15 #define MX51_PAD_EIM_D16__EIM_D16 0x05c 0x3f0 0x000 0x0 0x0 16 #define MX51_PAD_EIM_D16__GPIO2_0 0x05c 0x3f0 0x000 0x1 0x0 17 #define MX51_PAD_EIM_D16__I2C1_SDA 0x05c 0x3f0 0x9b4 0x4 0x0 18 #define MX51_PAD_EIM_D16__UART2_CTS 0x05c 0x3f0 0x000 0x3 0x0 19 #define MX51_PAD_EIM_D16__USBH2_DATA0 0x05c 0x3f0 0x000 0x2 0x0 20 #define MX51_PAD_EIM_D17__AUD5_RXD 0x060 0x3f4 0x8d4 0x7 0x0 21 #define MX51_PAD_EIM_D17__EIM_D17 0x060 0x3f4 0x000 0x0 0x0 22 #define MX51_PAD_EIM_D17__GPIO2_1 0x060 0x3f4 0x000 0x1 0x0 [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/powerpc/fsl/ |
H A D | pamu.txt | 12 "fsl,pamu-v1.0". The second is "fsl,pamu". 18 PAMU v1.0, on an SOC that has five PAMU devices, the size 19 is 0x5000. 56 For PAMU v1.0, this size is 0x1000. 95 compatible = "fsl,pamu-v1.0", "fsl,pamu"; 96 reg = <0x20000 0x5000>; 97 ranges = <0 0x20000 0x5000>; 98 fsl,portid-mapping = <0xf80000>; 102 24 2 0 0 105 pamu0: pamu@0 { [all …]
|
/freebsd/sys/dev/dwc/ |
H A D | dwc1000_reg.h | 37 #define MAC_CONFIGURATION 0x0 47 #define MAC_FRAME_FILTER 0x4 53 #define FRAME_FILTER_PR (1 << 0) /* All Incoming Frames */ 54 #define GMAC_MAC_HTHIGH 0x08 55 #define GMAC_MAC_HTLOW 0x0c 56 #define GMII_ADDRESS 0x10 57 #define GMII_ADDRESS_PA_MASK 0x1f /* Phy device */ 59 #define GMII_ADDRESS_GR_MASK 0x1f /* Phy register */ 61 #define GMII_ADDRESS_CR_MASK 0xf 64 #define GMII_ADDRESS_GB (1 << 0) /* Busy */ [all …]
|
/freebsd/sys/contrib/device-tree/src/powerpc/fsl/ |
H A D | p5020si-post.dtsi | 37 alloc-ranges = <0 0 0x10000 0>; 42 alloc-ranges = <0 0 0x10000 0>; 47 alloc-ranges = <0 0 0x10000 0>; 52 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 67 fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ 68 pcie@0 { 69 reg = <0 0 0 0 0>; 75 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
H A D | p3041si-post.dtsi | 37 alloc-ranges = <0 0 0x10 0>; 42 alloc-ranges = <0 0 0x10 0>; 47 alloc-ranges = <0 0 0x10 0>; 52 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 67 fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ 68 pcie@0 { 69 reg = <0 0 0 0 0>; 75 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
H A D | p5040si-post.dtsi | 37 alloc-ranges = <0 0 0x10000 0>; 42 alloc-ranges = <0 0 0x10000 0>; 47 alloc-ranges = <0 0 0x10000 0>; 52 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 67 pcie@0 { 68 reg = <0 0 0 0 0>; 74 interrupt-map-mask = <0xf800 0 0 7>; 76 /* IDSEL 0x0 */ [all …]
|
H A D | p2041si-post.dtsi | 37 alloc-ranges = <0 0 0x10 0>; 42 alloc-ranges = <0 0 0x10 0>; 47 alloc-ranges = <0 0 0x10 0>; 52 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 67 fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ 68 pcie@0 { 69 reg = <0 0 0 0 0>; 75 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
H A D | b4si-post.dtsi | 37 alloc-ranges = <0 0 0x10000 0>; 42 alloc-ranges = <0 0 0x10000 0>; 47 alloc-ranges = <0 0 0x10000 0>; 54 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 64 interrupts = <20 2 0 0>; 66 pcie@0 { 71 reg = <0 0 0 0 0>; 72 interrupts = <20 2 0 0>; [all …]
|
H A D | p4080si-post.dtsi | 37 alloc-ranges = <0 0 0x10 0>; 42 alloc-ranges = <0 0 0x10 0>; 47 alloc-ranges = <0 0 0x10 0>; 52 interrupts = <25 2 0 0>; 57 /* controller at 0x200000 */ 63 bus-range = <0x0 0xff>; 67 fsl,liodn-reg = <&guts 0x500>; /* PEX1LIODNR */ 68 pcie@0 { 69 reg = <0 0 0 0 0>; 75 interrupt-map-mask = <0xf800 0 0 7>; [all …]
|
H A D | t2081si-post.dtsi | 37 alloc-ranges = <0 0 0x10000 0>; 42 alloc-ranges = <0 0 0x10000 0>; 47 alloc-ranges = <0 0 0x10000 0>; 54 interrupts = <25 2 0 0>; 57 /* controller at 0x240000 */ 59 compatible = "fsl,t2080-pcie", "fsl,qoriq-pcie-v3.0", "fsl,qoriq-pcie"; 63 bus-range = <0x0 0xff>; 64 interrupts = <20 2 0 0>; 66 pcie@0 { 67 reg = <0 0 0 0 0>; [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
H A D | imx8mn-pinfunc.h | 14 …ne MX8MN_IOMUXC_BOOT_MODE2_CCMSRCGPCMIX_BOOT_MODE2 0x020 0x25C 0x000 0x0 0x0 15 …ne MX8MN_IOMUXC_BOOT_MODE2_I2C1_SCL 0x020 0x25C 0x55C 0x1 0x3 16 …ne MX8MN_IOMUXC_BOOT_MODE3_CCMSRCGPCMIX_BOOT_MODE3 0x024 0x260 0x000 0x0 0x0 17 …ne MX8MN_IOMUXC_BOOT_MODE3_I2C1_SDA 0x024 0x260 0x56C 0x1 0x3 18 …ne MX8MN_IOMUXC_GPIO1_IO00_GPIO1_IO0 0x028 0x290 0x000 0x0 0x0 19 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_ENET_PHY_REF_CLK_ROOT 0x028 0x290 0x000 0x1 0x0 20 …ne MX8MN_IOMUXC_GPIO1_IO00_ANAMIX_REF_CLK_32K 0x028 0x290 0x000 0x5 0x0 21 …ne MX8MN_IOMUXC_GPIO1_IO00_CCMSRCGPCMIX_EXT_CLK1 0x028 0x290 0x000 0x6 0x0 22 …ne MX8MN_IOMUXC_GPIO1_IO01_GPIO1_IO1 0x02C 0x294 0x000 0x0 0x0 23 …ne MX8MN_IOMUXC_GPIO1_IO01_PWM1_OUT 0x02C 0x294 0x000 0x1 0x0 [all …]
|
H A D | imx8mp-pinfunc.h | 13 #define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0 14 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 15 #define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 16 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 17 #define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0 18 #define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0 19 #define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 20 #define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 21 #define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0 22 #define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0 [all …]
|
/freebsd/sys/dev/rtwn/rtl8192c/ |
H A D | r92c_reg.h | 28 #define R92C_SYS_ISO_CTRL 0x000 29 #define R92C_SYS_FUNC_EN 0x002 30 #define R92C_APS_FSMCO 0x004 31 #define R92C_SYS_CLKR 0x008 32 #define R92C_AFE_MISC 0x010 33 #define R92C_SPS0_CTRL 0x011 34 #define R92C_SPS_OCP_CFG 0x018 35 #define R92C_RSV_CTRL 0x01c 36 #define R92C_RF_CTRL 0x01f 37 #define R92C_LDOA15_CTRL 0x020 [all …]
|
/freebsd/sys/contrib/dev/mediatek/mt76/mt7603/ |
H A D | regs.h | 6 #define MT_HW_REV 0x1000 7 #define MT_HW_CHIPID 0x1008 8 #define MT_TOP_MISC2 0x1134 10 #define MT_MCU_BASE 0x2000 13 #define MT_MCU_PCIE_REMAP_1 MT_MCU(0x500) 14 #define MT_MCU_PCIE_REMAP_1_OFFSET GENMASK(17, 0) 17 #define MT_MCU_PCIE_REMAP_2 MT_MCU(0x504) 18 #define MT_MCU_PCIE_REMAP_2_OFFSET GENMASK(18, 0) 21 #define MT_HIF_BASE 0x4000 24 #define MT_INT_SOURCE_CSR MT_HIF(0x200) [all …]
|
/freebsd/tools/tools/cxgbtool/ |
H A D | reg_defs.c | 7 { "SG_CONTROL", 0x0, 0 }, 8 { "CmdQ0_Enable", 0, 1 }, 24 { "SG_DOORBELL", 0x4, 0 }, 25 { "CmdQ0_Enable", 0, 1 }, 29 { "SG_CMD0BASELWR", 0x8, 0 }, 30 { "SG_CMD0BASEUPR", 0xc, 0 }, 31 { "SG_CMD1BASELWR", 0x10, 0 }, 32 { "SG_CMD1BASEUPR", 0x14, 0 }, 33 { "SG_FL0BASELWR", 0x18, 0 }, 34 { "SG_FL0BASEUPR", 0x1c, 0 }, [all …]
|
/freebsd/sys/x86/include/ |
H A D | specialreg.h | 38 #define CR0_PE 0x00000001 /* Protected mode Enable */ 39 #define CR0_MP 0x00000002 /* "Math" (fpu) Present */ 40 #define CR0_EM 0x00000004 /* EMulate FPU instructions. (trap ESC only) */ 41 #define CR0_TS 0x00000008 /* Task Switched (if MP, trap ESC and WAIT) */ 42 #define CR0_PG 0x80000000 /* PaGing enable */ 47 #define CR0_NE 0x00000020 /* Numeric Error enable (EX16 vs IRQ13) */ 48 #define CR0_WP 0x00010000 /* Write Protect (honor page protect in 50 #define CR0_AM 0x00040000 /* Alignment Mask (set to enable AC flag) */ 51 #define CR0_NW 0x20000000 /* Not Write-through */ 52 #define CR0_CD 0x40000000 /* Cache Disable */ [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/qcom/ |
H A D | sm8450.dtsi | 39 #clock-cells = <0>; 45 #clock-cells = <0>; 52 #size-cells = <0>; 54 CPU0: cpu@0 { 57 reg = <0x0 0x0>; 62 qcom,freq-domain = <&cpufreq_hw 0>; 64 clocks = <&cpufreq_hw 0>; 81 reg = <0x0 0x10 [all...] |