Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-gt-next

Some display refactoring patches are needed in order to allow conflict-
less merging.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- New V4L2 ioctl VIDIOC_REMOVE_BUFS

- experimental s

Merge tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- New V4L2 ioctl VIDIOC_REMOVE_BUFS

- experimental support for using generic metaformats on V4L2 core

- New drivers: Intel IPU6 controller driver, Broadcom BCM283x/BCM271x

- More cleanups at atomisp driver

- Usual bunch of driver cleanups, improvements and fixes

* tag 'media/v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (328 commits)
media: bcm2835-unicam: Depend on COMMON_CLK
Revert "media: v4l2-ctrls: show all owned controls in log_status"
media: ov2740: Ensure proper reset sequence on probe()
media: intel/ipu6: Don't print user-triggerable errors to kernel log
media: bcm2835-unicam: Fix driver path in MAINTAINERS
media: bcm2835-unicam: Fix a NULL vs IS_ERR() check
media: bcm2835-unicam: Do not print error when irq not found
media: bcm2835-unicam: Do not replace IRQ retcode during probe
media: bcm2835-unicam: Convert to platform remove callback returning void
media: media: intel/ipu6: Fix spelling mistake "remappinp" -> "remapping"
media: intel/ipu6: explicitly include vmalloc.h
media: cec.h: Fix kerneldoc
media: uvcvideo: Refactor iterators
media: v4l: async: refactor v4l2_async_create_ancillary_links
media: intel/ipu6: Don't re-allocate memory for firmware
media: dvb-frontends: tda10048: Fix integer overflow
media: tc358746: Use the correct div_ function
media: i2c: st-mipid02: Use the correct div function
media: tegra-vde: Refactor timeout handling
media: stk1160: Use min macro
...

show more ...

media: i2c: ov4689: Set timing registers programmatically

Set timing-related and BLC anchor registers via cci calls instead of
hardcoding them in the register table. This prepares the driver for
imp

media: i2c: ov4689: Set timing registers programmatically

Set timing-related and BLC anchor registers via cci calls instead of
hardcoding them in the register table. This prepares the driver for
implementation of configurable analogue crop and binning. No
functional change intended.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Move pixel array size out of struct ov4689_mode

Pixel array dimensions and default crop size do not belong to the
ov4689_mode structure, since they are mode independent. Make the

media: i2c: ov4689: Move pixel array size out of struct ov4689_mode

Pixel array dimensions and default crop size do not belong to the
ov4689_mode structure, since they are mode independent. Make them
defines instead.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Implement manual color balance controls

The OV4689 sensor has separate red and blue gain settings (up to 4x).
Implement appropriate controls in the driver. Default gain values
ar

media: i2c: ov4689: Implement manual color balance controls

The OV4689 sensor has separate red and blue gain settings (up to 4x).
Implement appropriate controls in the driver. Default gain values
are not modified.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Implement digital gain control

The OV4689 sensor supports digital gain up to 16x. Implement
corresponding control in the driver. Default digital gain value is not
modified by thi

media: i2c: ov4689: Implement digital gain control

The OV4689 sensor supports digital gain up to 16x. Implement
corresponding control in the driver. Default digital gain value is not
modified by this patch.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Implement vflip/hflip controls

The OV4689 sensor supports horizontal and vertical flipping. Add
appropriate controls to the driver. Toggling both array flip and
digital flip bits

media: i2c: ov4689: Implement vflip/hflip controls

The OV4689 sensor supports horizontal and vertical flipping. Add
appropriate controls to the driver. Toggling both array flip and
digital flip bits allows to achieve flipping while maintaining output
Bayer order. Note that the default value of hflip control corresponds
to both bits set, as it was before this patch.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Make horizontal blanking configurable

Make horizontal blanking configurable. To do so, set HTS register
according to the requested horizontal blanking in ov4689_set_ctrl
instead

media: i2c: ov4689: Make horizontal blanking configurable

Make horizontal blanking configurable. To do so, set HTS register
according to the requested horizontal blanking in ov4689_set_ctrl
instead of the register table. Default HTS value is not changed by
this patch. Minimal HTS value is found experimentally and corresponds
to 90 fps framerate at minimum vertical blanking. Real HTS value is
the register value multiplied by 4.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Remove max_fps field from struct ov4689_mode

max_fps field of struct ov4689_mode is unused in this driver, so
remove it.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>

media: i2c: ov4689: Remove max_fps field from struct ov4689_mode

max_fps field of struct ov4689_mode is unused in this driver, so
remove it.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Use runtime PM autosuspend

Use runtime PM autosuspend to avoid powering off the sensor during
fast stop-reconfigure-restart cycles.

Signed-off-by: Mikhail Rudenko <mike.rudenko@

media: i2c: ov4689: Use runtime PM autosuspend

Use runtime PM autosuspend to avoid powering off the sensor during
fast stop-reconfigure-restart cycles.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Enable runtime PM before registering sub-device

As the sensor may be accessible right after its async sub-device is
registered, enable runtime PM before doing so.

Signed-off-by:

media: i2c: ov4689: Enable runtime PM before registering sub-device

As the sensor may be accessible right after its async sub-device is
registered, enable runtime PM before doing so.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Use sub-device active state

Use sub-device active state. Employ control handler lock to
synchronize access to the active state and s_stream.

Signed-off-by: Mikhail Rudenko <mike

media: i2c: ov4689: Use sub-device active state

Use sub-device active state. Employ control handler lock to
synchronize access to the active state and s_stream.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Refactor ov4689_set_ctrl

Introduce local variable for regmap within the ov4689_set_ctrl
function. This adjustment eliminates repetition within the function.

Signed-off-by: Mikha

media: i2c: ov4689: Refactor ov4689_set_ctrl

Introduce local variable for regmap within the ov4689_set_ctrl
function. This adjustment eliminates repetition within the function.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: Remove i2c_client from ov4689 struct

The 'client' field within the 'ov4689' structure is solely used to
access its 'dev' member. This commit removes the 'client' field and
direct

media: i2c: ov4689: Remove i2c_client from ov4689 struct

The 'client' field within the 'ov4689' structure is solely used to
access its 'dev' member. This commit removes the 'client' field and
directly stores a pointer to the 'struct device'.

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...

media: i2c: ov4689: CCI conversion

Convert the i2c register accesses to utilize the CCI helper library
rather than relying on driver-specific functions. Also, set analogue
gain in a single 16-bit wr

media: i2c: ov4689: CCI conversion

Convert the i2c register accesses to utilize the CCI helper library
rather than relying on driver-specific functions. Also, set analogue
gain in a single 16-bit write instead of two 8-bit writes.

[Sakari Ailus: Initialise sensor_gain as 0.]

Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

show more ...