Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge tag 'v6.4-rc2' into media_stage

Linux 6.4-rc2

* tag 'v6.4-rc2': (162 commits)
Linux 6.4-rc2
parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
ext4: bail out of ext4_xatt

Merge tag 'v6.4-rc2' into media_stage

Linux 6.4-rc2

* tag 'v6.4-rc2': (162 commits)
Linux 6.4-rc2
parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
ext4: bail out of ext4_xattr_ibody_get() fails for any reason
ext4: add bounds checking in get_max_inline_xattr_value_size()
ext4: add indication of ro vs r/w mounts in the mount message
ext4: fix deadlock when converting an inline directory in nojournal mode
ext4: improve error recovery code paths in __ext4_remount()
ext4: improve error handling from ext4_dirhash()
ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
ext4: check iomap type only if ext4_iomap_begin() does not fail
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
ext4: fix data races when using cached status extents
ext4: avoid deadlock in fs reclaim with page writeback
ext4: fix invalid free tracking in ext4_xattr_move_to_block()
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
ext4: allow ext4_get_group_info() to fail
cxl: Add missing return to cdat read error path
tools/testing/cxl: Use DEFINE_STATIC_SRCU()
x86/retbleed: Fix return thunk alignment
Documentation/block: drop the request.rst file
...

show more ...

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'dt-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt

Pull devicetree binding fixes from Krzysztof Kozlowski:
"A few fixes for Devicetree bindings and related docs

Merge tag 'dt-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt

Pull devicetree binding fixes from Krzysztof Kozlowski:
"A few fixes for Devicetree bindings and related docs, all for issues
introduced in v6.4-rc1 commits:

- media/ov2685: fix number of possible data lanes, as old binding
explicitly mentioned one data lane. This fixes dt_binding_check
warnings like:

Documentation/devicetree/bindings/media/rockchip-isp1.example.dtb: camera@3c: port:endpoint:data-lanes: [[1]] is too short
From schema: Documentation/devicetree/bindings/media/i2c/ovti,ov2685.yaml

- PCI/fsl,imx6q: correct parsing of assigned-clocks and related
properties and make the clocks more specific per PCI device (host
or endpoint). This fixes dtschema limitation and dt_binding_check
warnings like:

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000: Unevaluated properties are not allowed
From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml

- Maintainers: correct path of Apple PWM binding. This fixes
refcheckdocs warning"

* tag 'dt-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
dt-bindings: PCI: fsl,imx6q: fix assigned-clocks warning
MAINTAINERS: adjust file entry for ARM/APPLE MACHINE SUPPORT
media: dt-bindings: ov2685: Correct data-lanes attribute

show more ...

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

dt-bindings: PCI: fsl,imx6q: fix assigned-clocks warning

assigned-clocks are a dependency of clocks, however the dtschema has
limitation and expects clocks to be present in the binding using
assigne

dt-bindings: PCI: fsl,imx6q: fix assigned-clocks warning

assigned-clocks are a dependency of clocks, however the dtschema has
limitation and expects clocks to be present in the binding using
assigned-clocks, not in other referenced bindings. The clocks were
defined in common fsl,imx6q-pcie-common.yaml, which is referenced by
fsl,imx6q-pcie-ep.yaml. The fsl,imx6q-pcie-ep.yaml used assigned-clocks
thus leading to warnings:

Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.example.dtb: pcie-ep@33800000:
Unevaluated properties are not allowed ('assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' were unexpected)
From schema: Documentation/devicetree/bindings/pci/fsl,imx6q-pcie-ep.yaml

Fix this by moving clocks to each specific schema from the common one
and narrowing them to strictly match what is expected for given device.

Fixes: b10f82380eeb ("dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema")
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Richard Zhu <hongxing.zhu@nxp.com>
Link: https://lore.kernel.org/r/20230508071837.68552-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_fo

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators

PCIe native device hotplug:

- Fix AB-BA deadlock between reset_lock and device_lock

Power management:

- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices

- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset

Error handling:

- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native

ASPM:

- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0

Freescale i.MX6 PCIe controller driver:

- Install imprecise external abort handler only when DT indicates
PCIe support

Freescale Layerscape PCIe controller driver:

- Add ls1028a endpoint mode support

Qualcomm PCIe controller driver:

- Add SM8550 DT binding and driver support

- Add SDX55 DT binding and driver support

- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3

- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0

- Add DT "mhi" register region for supported SoCs

- Expose link transition counts via debugfs to help debug low power
issues

- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices

- Enable async probe by default to reduce boot time

Miscellaneous:

- Sort controller Kconfig entries by vendor"

* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...

show more ...

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xi

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
PCI/PM: Increase wait time after resume
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
PCI: Fix up L1SS capability for Intel Apollo Lake Root Port
PCI: qcom: Expose link transition counts via debugfs
dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
PCI: qcom: Use macros for defining total no. of clocks & supplies
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
PCI: qcom: Use lower case for hex
PCI: qcom: Add missing macros for register fields
PCI: qcom: Use bitfield definitions for register fields
PCI: qcom: Sort and group registers and bitfield definitions
PCI: qcom: Remove PCIE20_ prefix from register definitions
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
PCI/EDR: Add edr_handle_event() comments
PCI/EDR: Clear Device Status after EDR error recovery
efi/cper: Remove unnecessary aer.h include
dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
PCI/P2PDMA: Fix pci_p2pmem_find_many() kernel-doc
EISA: Drop unused pci_bus_for_each_resource() index argument
PCI: Make pci_bus_for_each_resource() index optional
PCI: Document pci_bus_for_each_resource()
PCI: Introduce pci_dev_for_each_resource()
PCI: Introduce pci_resource_n()
PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macro
PCI: mt7621: Use dev_info() to log PCIe card detection
PCI: imx6: Install the fault handler only on compatible match
PCI: layerscape: Add EP mode support for ls1028a
PCI: rcar: Avoid defines prefixed with CONFIG
dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema
PCI: kirin: Select REGMAP_MMIO

show more ...

Merge branch 'pci/controller/dt'

- Convert Amlogic Meson AXG DWC PCIe SoC controller bindings to dt-schema
(Neil Armstrong)

- Restructure i.MX schema to extract common properties to be shared by

Merge branch 'pci/controller/dt'

- Convert Amlogic Meson AXG DWC PCIe SoC controller bindings to dt-schema
(Neil Armstrong)

- Restructure i.MX schema to extract common properties to be shared by Root
Complex and Endpoint schema (Richard Zhu)

* pci/controller/dt:
dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema

show more ...

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema

Restruct i.MX PCIe schema, derive the common properties, thus they can
be shared by both the RC and Endpoint schema.

Update the description of fsl

dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema

Restruct i.MX PCIe schema, derive the common properties, thus they can
be shared by both the RC and Endpoint schema.

Update the description of fsl,imx6q-pcie.yaml, and move the EP mode
compatible to fsl,imx6q-pcie-ep.yaml.

Add support for i.MX8M PCIe Endpoint modes, and update the MAINTAINER
accordingly.

Link: https://lore.kernel.org/r/1676441915-1394-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.

Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get latest upstream.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-misc-next

Backmerging to get v6.3-rc1 and sync with the other DRM trees.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge remote-tracking branch 'acme/perf-tools' into perf-tools-next

To pick up perf-tools fixes just merged upstream.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Rework portdrv shutdown so it disables interrupts but

Merge tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Rework portdrv shutdown so it disables interrupts but doesn't
disable bus mastering, which leads to hangs on Loongson LS7A

- Add mechanism to prevent Max_Read_Request_Size (MRRS) increases,
again to avoid hardware issues on Loongson LS7A (and likely other
devices based on DesignWare IP)

- Ignore devices with a firmware (DT or ACPI) node that says the
device is disabled

Resource management:

- Distribute spare resources to unconfigured hotplug bridges at
boot-time (not just when hot-adding such a bridge), which makes
hot-adding devices to docks work better. Tried this in v6.1 but had
to revert for regressions, so try again

- Fix root bus issue that dropped resources that happened to end
at 0, e.g., [bus 00]

PCI device hotplug:

- Remove device locking when marking device as disconnected so this
doesn't have to wait for concurrent driver bind/unbind to complete

- Quirk more Qualcomm bridges that don't fully implement the PCIe
Slot Status 'Command Completed' bit

Power management:

- Account for _S0W of the target bridge in acpi_pci_bridge_d3() so we
don't miss hot-add notifications for USB4 docks, Thunderbolt, etc

Reset:

- Observe delay after reset, e.g., resuming from system sleep,
regardless of whether a bridge can suspend to D3cold at runtime

- Wait for secondary bus to become ready after a bridge reset

Virtualization:

- Avoid FLR on some AMD FCH AHCI adapters where it doesn't work

- Allow independent IOMMU groups for some Wangxun NICs that prevent
peer-to-peer transactions but don't advertise an ACS Capability

Error handling:

- Configure End-to-End-CRC (ECRC) only if Linux owns the AER
Capability

- Remove redundant Device Control Error Reporting Enable in the AER
service driver since this is already done for all devices during
enumeration

ASPM:

- Add pci_enable_link_state() interface to allow drivers to enable
ASPM link state

Endpoint framework:

- Move dra7xx and tegra194 linkup processing from hard IRQ to
threaded IRQ handler

- Add a separate lock for endpoint controller list of endpoint
function drivers to prevent deadlock in callbacks

- Pass events from endpoint controller to endpoint function drivers
via callbacks instead of notifiers

Synopsys DesignWare eDMA controller driver (acked by Vinod):

- Fix CPU vs PCI address issues

- Fix source vs destination address issues

- Fix issues with interleaved transfer semantics

- Fix channel count initialization issue (issue still exists in
several other drivers)

- Clean up and improve debugfs usage so it will work on platforms
with several eDMA devices

Baikal T-1 PCIe controller driver:

- Set a 64-bit DMA mask

Freescale i.MX6 PCIe controller driver:

- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver
support

Intel VMD host bridge driver:

- Add quirk to configure PCIe ASPM and LTR. This is normally done by
BIOS, and will be for future products

Marvell MVEBU PCIe controller driver:

- Mark this driver as broken in Kconfig since bugs prevent its daily
usage

MediaTek MT7621 PCIe controller driver:

- Delay PHY port initialization to improve boot reliability for ZBT
WE1326, ZBT WF3526-P, and some Netgear models

Qualcomm PCIe controller driver:

- Add MSM8998 DT compatible string

- Unify MSM8996 and MSM8998 clock orderings

- Add SM8350 DT binding and driver support

- Add IPQ8074 Gen3 DT binding and driver support

- Correct qcom,perst-regs in DT binding

- Add qcom_pcie_host_deinit() so the PHY is powered off and
regulators and clocks are disabled on late host-init errors

Socionext UniPhier Pro5 controller driver:

- Clean up uniphier-ep reg, clocks, resets, and their names in DT
binding

Synopsys DesignWare PCIe controller driver:

- Restrict coherent DMA mask to 32 bits for MSI, but allow controller
drivers to set 64-bit streaming DMA mask

- Add eDMA engine support in both Root Port and Endpoint controllers

Miscellaneous:

- Remove MODULE_LICENSE from boolean drivers so they don't look like
modules so modprobe can complain about them"

* tag 'pci-v6.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (86 commits)
PCI: dwc: Add Root Port and Endpoint controller eDMA engine support
PCI: bt1: Set 64-bit DMA mask
PCI: dwc: Restrict only coherent DMA mask for MSI address allocation
dmaengine: dw-edma: Prepare dw_edma_probe() for builtin callers
dmaengine: dw-edma: Depend on DW_EDMA instead of selecting it
dmaengine: dw-edma: Add mem-mapped LL-entries support
PCI: Remove MODULE_LICENSE so boolean drivers don't look like modules
PCI: hv: Drop duplicate PCI_MSI dependency
PCI/P2PDMA: Annotate RCU dereference
PCI/sysfs: Constify struct kobj_type pci_slot_ktype
PCI: hotplug: Allow marking devices as disconnected during bind/unbind
PCI: pciehp: Add Qualcomm quirk for Command Completed erratum
PCI: qcom: Add IPQ8074 Gen3 port support
dt-bindings: PCI: qcom: Add IPQ8074 Gen3 port
dt-bindings: PCI: qcom: Sort compatibles alphabetically
PCI: qcom: Fix host-init error handling
PCI: qcom: Add SM8350 support
dt-bindings: PCI: qcom: Add SM8350
dt-bindings: PCI: qcom-ep: Correct qcom,perst-regs
dt-bindings: PCI: qcom: Unify MSM8996 and MSM8998 clock order
...

show more ...

Merge branch 'pci/controller/imx6'

- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support
(Richard Zhu)

* pci/controller/imx6:
PCI: imx6: Add i.MX8MP PCIe EP support
PCI:

Merge branch 'pci/controller/imx6'

- Add i.MX8MM, i.MX8MQ, i.MX8MP endpoint mode DT binding and driver support
(Richard Zhu)

* pci/controller/imx6:
PCI: imx6: Add i.MX8MP PCIe EP support
PCI: imx6: Add i.MX8MM PCIe EP support
PCI: imx6: Add i.MX8MQ PCIe EP support
PCI: imx6: Add i.MX PCIe EP mode support
misc: pci_endpoint_test: Add i.MX8 PCIe EP device support
dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string
dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string
dt-bindings: imx6q-pcie: Add i.MX8MM PCIe EP mode compatible string

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string

Add i.MX8MP PCIe endpoint mode compatible string.

Link: https://lore.kernel.org/r/1673847684-31893-4-git-send-email-hongxing.zhu@

dt-bindings: imx6q-pcie: Add i.MX8MP PCIe EP mode compatible string

Add i.MX8MP PCIe endpoint mode compatible string.

Link: https://lore.kernel.org/r/1673847684-31893-4-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string

Add i.MX8MQ PCIe endpoint mode compatible string.

Link: https://lore.kernel.org/r/1673847684-31893-3-git-send-email-hongxing.zhu@

dt-bindings: imx6q-pcie: Add i.MX8MQ PCIe EP mode compatible string

Add i.MX8MQ PCIe endpoint mode compatible string.

Link: https://lore.kernel.org/r/1673847684-31893-3-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>

show more ...