sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

xen: Remove unused devclass arguments to DRIVER_MODULE.

xen: switch to use headers in contrib

These headers originate with the Xen project and shouldn't be mixed with
the main portion of the FreeBSD kernel. Notably they shouldn't be the
target of clean-u

xen: switch to use headers in contrib

These headers originate with the Xen project and shouldn't be mixed with
the main portion of the FreeBSD kernel. Notably they shouldn't be the
target of clean-up commits.

Switch to use the headers in sys/contrib/xen.

Reviewed by: royger

show more ...

xen: plug some of set-but-not-used vars

Sponsored by: Rubicon Communications, LLC ("Netgate")

xen: create VM_MEMATTR_XEN for Xen memory mappings

The requirements for pages shared with Xen/other VMs may vary from
architecture to architecture. As such create a macro which various
architecture

xen: create VM_MEMATTR_XEN for Xen memory mappings

The requirements for pages shared with Xen/other VMs may vary from
architecture to architecture. As such create a macro which various
architectures can use.

Remove a use of PAT_WRITE_BACK in xenstore.c. This is a x86-ism which
shouldn't have been present in a common area.

Original idea: Julien Grall <julien@xen.org>, 2014-01-14 06:44:08
Approach suggested by: royger
Reviewed by: royger, mhorne
Differential Revision: https://reviews.freebsd.org/D29351

show more ...

xen: allow limiting the amount of duplicated pending xenstore watches

Xenstore watches received are queued in a list and processed in a
deferred thread. Such queuing was done without any checking, s

xen: allow limiting the amount of duplicated pending xenstore watches

Xenstore watches received are queued in a list and processed in a
deferred thread. Such queuing was done without any checking, so a
guest could potentially trigger a resource starvation against the
FreeBSD kernel if such kernel is watching any user-controlled xenstore
path.

Allowing limiting the amount of pending events a watch can accumulate
to prevent a remote guest from triggering this resource starvation
issue.

For the PV device backends and frontends this limitation is only
applied to the other end /state node, which is limited to 1 pending
event, the rest of the watched paths can still have unlimited pending
watches because they are either local or controlled by a privileged
domain.

The xenstore user-space device gets special treatment as it's not
possible for the kernel to know whether the paths being watched by
user-space processes are controlled by a guest domain. For this reason
watches set by the xenstore user-space device are limited to 1000
pending events. Note this can be modified using the
max_pending_watch_events sysctl of the device.

This is XSA-349.

Sponsored by: Citrix Systems R&D
MFC after: 3 days

show more ...

dev/xen: clean up empty lines in .c and .h files

Merge ^/head r358269 through r358399.

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (16 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly mark

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (16 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE.

Reviewed by: royger
Approved by: kib (mentor, blanket)
Differential Revision: https://reviews.freebsd.org/D23638

show more ...

xen: remove direct usage of HYPERVISOR_start_info

HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hype

xen: remove direct usage of HYPERVISOR_start_info

HYPERVISOR_start_info is only available to PV and PVHv1 guests, HVM
and PVHv2 guests get this data from HVM parameters that are fetched
using a hypercall.

Instead provide a set of helper functions that should be used to fetch
this data. The helper functions have different implementations
depending on whether FreeBSD is running as PVHv1 or HVM/PVHv2 guest
type.

This helps to cleanup generic Xen code by removing quite a lot of
xen_pv_domain and xen_hvm_domain macro usages.

Sponsored by: Citrix Systems R&D

show more ...

xenstore: don't wait with the PCATCH flag

Due to the current synchronous xenstore implementation in FreeBSD, we
cannot return from xs_read_reply without reading a reply, or else the
ring gets out of

xenstore: don't wait with the PCATCH flag

Due to the current synchronous xenstore implementation in FreeBSD, we
cannot return from xs_read_reply without reading a reply, or else the
ring gets out of sync and the next request will read the previous
reply and crash due to the type mismatch. A proper solution involves
making use of the req_id field in the message and allowing multiple
in-flight messages at the same time on the ring.

Remove the PCATCH flag so that signals don't interrupt the wait.

Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D

show more ...

xenstore: remove the suspend sx lock

There's no need to prevent suspend while doing xenstore transactions,
callers of transactions are supposed to be prepared for a transaction
to fail.

This fixes

xenstore: remove the suspend sx lock

There's no need to prevent suspend while doing xenstore transactions,
callers of transactions are supposed to be prepared for a transaction
to fail.

This fixes a bug that could be triggered from the xenstore user-space
device, since starting a transaction from user-space would result in
returning there with a sx lock held, that causes a WITNESS check to
trigger.

Tested by: Nathan Friess <nathan.friess@gmail.com>
Sponsored by: Citrix Systems R&D

show more ...

xenstore: fix suspension when using the xenstore device

Lock the xenstore request mutex when suspending user-space processes, in order
to prevent any process from holding this lock when going into s

xenstore: fix suspension when using the xenstore device

Lock the xenstore request mutex when suspending user-space processes, in order
to prevent any process from holding this lock when going into suspension, or
else the xenstore suspend process is going to deadlock.

Submitted by: Liuyingdong <liuyingdong@huawei.com>
Reviewed by: royger
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D9638

show more ...

sys/dev: minor spelling fixes.

Most affect comments, very few have user-visible effects.

MFH r289384-r293170

Sponsored by: The FreeBSD Foundation

Catch up with head (r291075).

Merge from head

Merge from head

Sponsored by: Gandi.net

xen: Code cleanup and small bug fixes

xen/hypervisor.h:
- Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain,
is_running_on_xen
- Remove unused define CONFIG_X86_PAE
- Remove

xen: Code cleanup and small bug fixes

xen/hypervisor.h:
- Remove unused helpers: MULTI_update_va_mapping, is_initial_xendomain,
is_running_on_xen
- Remove unused define CONFIG_X86_PAE
- Remove unused variable xen_start_info: note that it's used inpcifront
which is not built at all
- Remove forward declaration of HYPERVISOR_crash

xen/xen-os.h:
- Remove unused define CONFIG_X86_PAE
- Drop unused helpers: test_and_clear_bit, clear_bit,
force_evtchn_callback
- Implement a generic version (based on ofed/include/linux/bitops.h) of
set_bit and test_bit and prefix them by xen_ to avoid any use by other
code than Xen. Note that It would be worth to investigate a generic
implementation in FreeBSD.
- Replace barrier() by __compiler_membar()
- Replace cpu_relax() by cpu_spinwait(): it's exactly the same as rep;nop
= pause

xen/xen_intr.h:
- Move the prototype of xen_intr_handle_upcall in it: Use by all the
platform

x86/xen/xen_intr.c:
- Use BITSET* for the enabledbits: Avoid to use custom helpers
- test_bit/set_bit has been renamed to xen_test_bit/xen_set_bit
- Don't export the variable xen_intr_pcpu

dev/xen/blkback/blkback.c:
- Fix the string format when XBB_DEBUG is enabled: host_addr is typed
uint64_t

dev/xen/balloon/balloon.c:
- Remove set but not used variable
- Use the correct type for frame_list: xen_pfn_t represents the frame
number on any architecture

dev/xen/control/control.c:
- Return BUS_PROBE_WILDCARD in xs_probe: Returning 0 in a probe callback
means the driver can handle this device. If by any chance xenstore is the
first driver, every new device with the driver is unset will use
xenstore.

dev/xen/grant-table/grant_table.c:
- Remove unused cmpxchg
- Drop unused include opt_pmap.h: Doesn't exist on ARM64 and it doesn't
contain anything required for the code on x86

dev/xen/netfront/netfront.c:
- Use the correct type for rx_pfn_array: xen_pfn_t represents the frame
number on any architecture

dev/xen/netback/netback.c:
- Use the correct type for gmfn: xen_pfn_t represents the frame number on
any architecture

dev/xen/xenstore/xenstore.c:
- Return BUS_PROBE_WILDCARD in xctrl_probe: Returning 0 in a probe callback
means the driver can handle this device. If by any chance xenstore is the
first driver, every new device with the driver is unset will use xenstore.

Note that with the changes, x86/include/xen/xen-os.h doesn't contain anymore
arch-specific code. Although, a new series will add some helpers that differ
between x86 and ARM64, so I've kept the headers for now.

Submitted by: Julien Grall <julien.grall@citrix.com>
Reviewed by: royger
Differential Revision: https://reviews.freebsd.org/D3921
Sponsored by: Citrix Systems R&D

show more ...

Finish merging from head, messed up in previous attempt

Merge r286744-r287584 from head.

Merge ^/head r286858 through r287489.

Merge from HEAD

Code cleanup unused-but-set-variable spotted by gcc.

Reviewed by: royger
Approved by: bapt (mentor)
Differential Revision: D3476