1# SPDX-License-Identifier: GPL-2.0-only 2config ARCH_HAS_RESET_CONTROLLER 3 bool 4 5menuconfig RESET_CONTROLLER 6 bool "Reset Controller Support" 7 default y if ARCH_HAS_RESET_CONTROLLER 8 help 9 Generic Reset Controller support. 10 11 This framework is designed to abstract reset handling of devices 12 via GPIOs or SoC-internal reset controller modules. 13 14 If unsure, say no. 15 16if RESET_CONTROLLER 17 18config RESET_A10SR 19 tristate "Altera Arria10 System Resource Reset" 20 depends on MFD_ALTERA_A10SR 21 help 22 This option enables support for the external reset functions for 23 peripheral PHYs on the Altera Arria10 System Resource Chip. 24 25config RESET_ATH79 26 bool "AR71xx Reset Driver" if COMPILE_TEST 27 default ATH79 28 help 29 This enables the ATH79 reset controller driver that supports the 30 AR71xx SoC reset controller. 31 32config RESET_AXS10X 33 bool "AXS10x Reset Driver" if COMPILE_TEST 34 default ARC_PLAT_AXS10X 35 help 36 This enables the reset controller driver for AXS10x. 37 38config RESET_BCM6345 39 bool "BCM6345 Reset Controller" 40 depends on BMIPS_GENERIC || COMPILE_TEST 41 default BMIPS_GENERIC 42 help 43 This enables the reset controller driver for BCM6345 SoCs. 44 45config RESET_BERLIN 46 bool "Berlin Reset Driver" if COMPILE_TEST 47 default ARCH_BERLIN 48 help 49 This enables the reset controller driver for Marvell Berlin SoCs. 50 51config RESET_BRCMSTB 52 tristate "Broadcom STB reset controller" 53 depends on ARCH_BRCMSTB || COMPILE_TEST 54 default ARCH_BRCMSTB 55 help 56 This enables the reset controller driver for Broadcom STB SoCs using 57 a SUN_TOP_CTRL_SW_INIT style controller. 58 59config RESET_BRCMSTB_RESCAL 60 bool "Broadcom STB RESCAL reset controller" 61 depends on HAS_IOMEM 62 default ARCH_BRCMSTB || COMPILE_TEST 63 help 64 This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on 65 BCM7216. 66 67config RESET_HSDK 68 bool "Synopsys HSDK Reset Driver" 69 depends on HAS_IOMEM 70 depends on ARC_SOC_HSDK || COMPILE_TEST 71 help 72 This enables the reset controller driver for HSDK board. 73 74config RESET_IMX7 75 tristate "i.MX7/8 Reset Driver" 76 depends on HAS_IOMEM 77 depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST 78 default y if SOC_IMX7D 79 select MFD_SYSCON 80 help 81 This enables the reset controller driver for i.MX7 SoCs. 82 83config RESET_INTEL_GW 84 bool "Intel Reset Controller Driver" 85 depends on OF && HAS_IOMEM 86 select REGMAP_MMIO 87 help 88 This enables the reset controller driver for Intel Gateway SoCs. 89 Say Y to control the reset signals provided by reset controller. 90 Otherwise, say N. 91 92config RESET_LANTIQ 93 bool "Lantiq XWAY Reset Driver" if COMPILE_TEST 94 default SOC_TYPE_XWAY 95 help 96 This enables the reset controller driver for Lantiq / Intel XWAY SoCs. 97 98config RESET_LPC18XX 99 bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST 100 default ARCH_LPC18XX 101 help 102 This enables the reset controller driver for NXP LPC18xx/43xx SoCs. 103 104config RESET_MESON 105 tristate "Meson Reset Driver" 106 depends on ARCH_MESON || COMPILE_TEST 107 default ARCH_MESON 108 help 109 This enables the reset driver for Amlogic Meson SoCs. 110 111config RESET_MESON_AUDIO_ARB 112 tristate "Meson Audio Memory Arbiter Reset Driver" 113 depends on ARCH_MESON || COMPILE_TEST 114 help 115 This enables the reset driver for Audio Memory Arbiter of 116 Amlogic's A113 based SoCs 117 118config RESET_NPCM 119 bool "NPCM BMC Reset Driver" if COMPILE_TEST 120 default ARCH_NPCM 121 help 122 This enables the reset controller driver for Nuvoton NPCM 123 BMC SoCs. 124 125config RESET_OXNAS 126 bool 127 128config RESET_PISTACHIO 129 bool "Pistachio Reset Driver" if COMPILE_TEST 130 default MACH_PISTACHIO 131 help 132 This enables the reset driver for ImgTec Pistachio SoCs. 133 134config RESET_QCOM_AOSS 135 tristate "Qcom AOSS Reset Driver" 136 depends on ARCH_QCOM || COMPILE_TEST 137 help 138 This enables the AOSS (always on subsystem) reset driver 139 for Qualcomm SDM845 SoCs. Say Y if you want to control 140 reset signals provided by AOSS for Modem, Venus, ADSP, 141 GPU, Camera, Wireless, Display subsystem. Otherwise, say N. 142 143config RESET_QCOM_PDC 144 tristate "Qualcomm PDC Reset Driver" 145 depends on ARCH_QCOM || COMPILE_TEST 146 help 147 This enables the PDC (Power Domain Controller) reset driver 148 for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want 149 to control reset signals provided by PDC for Modem, Compute, 150 Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. 151 152config RESET_RASPBERRYPI 153 tristate "Raspberry Pi 4 Firmware Reset Driver" 154 depends on RASPBERRYPI_FIRMWARE || (RASPBERRYPI_FIRMWARE=n && COMPILE_TEST) 155 default USB_XHCI_PCI 156 help 157 Raspberry Pi 4's co-processor controls some of the board's HW 158 initialization process, but it's up to Linux to trigger it when 159 relevant. This driver provides a reset controller capable of 160 interfacing with RPi4's co-processor and model these firmware 161 initialization routines as reset lines. 162 163config RESET_SCMI 164 tristate "Reset driver controlled via ARM SCMI interface" 165 depends on ARM_SCMI_PROTOCOL || COMPILE_TEST 166 default ARM_SCMI_PROTOCOL 167 help 168 This driver provides support for reset signal/domains that are 169 controlled by firmware that implements the SCMI interface. 170 171 This driver uses SCMI Message Protocol to interact with the 172 firmware controlling all the reset signals. 173 174config RESET_SIMPLE 175 bool "Simple Reset Controller Driver" if COMPILE_TEST 176 default ARCH_AGILEX || ARCH_ASPEED || ARCH_BCM4908 || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC 177 help 178 This enables a simple reset controller driver for reset lines that 179 that can be asserted and deasserted by toggling bits in a contiguous, 180 exclusive register space. 181 182 Currently this driver supports: 183 - Altera SoCFPGAs 184 - ASPEED BMC SoCs 185 - Bitmain BM1880 SoC 186 - Realtek SoCs 187 - RCC reset controller in STM32 MCUs 188 - Allwinner SoCs 189 - ZTE's zx2967 family 190 191config RESET_STM32MP157 192 bool "STM32MP157 Reset Driver" if COMPILE_TEST 193 default MACH_STM32MP157 194 help 195 This enables the RCC reset controller driver for STM32 MPUs. 196 197config RESET_SOCFPGA 198 bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA 199 default ARCH_SOCFPGA 200 select RESET_SIMPLE 201 help 202 This enables the reset driver for the SoCFPGA ARMv7 platforms. This 203 driver gets initialized early during platform init calls. 204 205config RESET_SUNXI 206 bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI 207 default ARCH_SUNXI 208 select RESET_SIMPLE 209 help 210 This enables the reset driver for Allwinner SoCs. 211 212config RESET_TI_SCI 213 tristate "TI System Control Interface (TI-SCI) reset driver" 214 depends on TI_SCI_PROTOCOL 215 help 216 This enables the reset driver support over TI System Control Interface 217 available on some new TI's SoCs. If you wish to use reset resources 218 managed by the TI System Controller, say Y here. Otherwise, say N. 219 220config RESET_TI_SYSCON 221 tristate "TI SYSCON Reset Driver" 222 depends on HAS_IOMEM 223 select MFD_SYSCON 224 help 225 This enables the reset driver support for TI devices with 226 memory-mapped reset registers as part of a syscon device node. If 227 you wish to use the reset framework for such memory-mapped devices, 228 say Y here. Otherwise, say N. 229 230config RESET_UNIPHIER 231 tristate "Reset controller driver for UniPhier SoCs" 232 depends on ARCH_UNIPHIER || COMPILE_TEST 233 depends on OF && MFD_SYSCON 234 default ARCH_UNIPHIER 235 help 236 Support for reset controllers on UniPhier SoCs. 237 Say Y if you want to control reset signals provided by System Control 238 block, Media I/O block, Peripheral Block. 239 240config RESET_UNIPHIER_GLUE 241 tristate "Reset driver in glue layer for UniPhier SoCs" 242 depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF 243 default ARCH_UNIPHIER 244 select RESET_SIMPLE 245 help 246 Support for peripheral core reset included in its own glue layer 247 on UniPhier SoCs. Say Y if you want to control reset signals 248 provided by the glue layer. 249 250config RESET_ZYNQ 251 bool "ZYNQ Reset Driver" if COMPILE_TEST 252 default ARCH_ZYNQ 253 help 254 This enables the reset controller driver for Xilinx Zynq SoCs. 255 256source "drivers/reset/sti/Kconfig" 257source "drivers/reset/hisilicon/Kconfig" 258source "drivers/reset/tegra/Kconfig" 259 260endif 261