1# SPDX-License-Identifier: GPL-2.0-only 2config ARCH_HAS_RESET_CONTROLLER 3 bool 4 5menuconfig RESET_CONTROLLER 6 bool "Reset Controller Support" 7 default y if ARCH_HAS_RESET_CONTROLLER 8 help 9 Generic Reset Controller support. 10 11 This framework is designed to abstract reset handling of devices 12 via GPIOs or SoC-internal reset controller modules. 13 14 If unsure, say no. 15 16if RESET_CONTROLLER 17 18config RESET_A10SR 19 tristate "Altera Arria10 System Resource Reset" 20 depends on MFD_ALTERA_A10SR 21 help 22 This option enables support for the external reset functions for 23 peripheral PHYs on the Altera Arria10 System Resource Chip. 24 25config RESET_ATH79 26 bool "AR71xx Reset Driver" if COMPILE_TEST 27 default ATH79 28 help 29 This enables the ATH79 reset controller driver that supports the 30 AR71xx SoC reset controller. 31 32config RESET_AXS10X 33 bool "AXS10x Reset Driver" if COMPILE_TEST 34 default ARC_PLAT_AXS10X 35 help 36 This enables the reset controller driver for AXS10x. 37 38config RESET_BERLIN 39 bool "Berlin Reset Driver" if COMPILE_TEST 40 default ARCH_BERLIN 41 help 42 This enables the reset controller driver for Marvell Berlin SoCs. 43 44config RESET_BRCMSTB 45 tristate "Broadcom STB reset controller" 46 depends on ARCH_BRCMSTB || COMPILE_TEST 47 default ARCH_BRCMSTB 48 help 49 This enables the reset controller driver for Broadcom STB SoCs using 50 a SUN_TOP_CTRL_SW_INIT style controller. 51 52config RESET_BRCMSTB_RESCAL 53 bool "Broadcom STB RESCAL reset controller" 54 depends on HAS_IOMEM 55 default ARCH_BRCMSTB || COMPILE_TEST 56 help 57 This enables the RESCAL reset controller for SATA, PCIe0, or PCIe1 on 58 BCM7216. 59 60config RESET_HSDK 61 bool "Synopsys HSDK Reset Driver" 62 depends on HAS_IOMEM 63 depends on ARC_SOC_HSDK || COMPILE_TEST 64 help 65 This enables the reset controller driver for HSDK board. 66 67config RESET_IMX7 68 tristate "i.MX7/8 Reset Driver" 69 depends on HAS_IOMEM 70 depends on SOC_IMX7D || (ARM64 && ARCH_MXC) || COMPILE_TEST 71 default y if SOC_IMX7D 72 select MFD_SYSCON 73 help 74 This enables the reset controller driver for i.MX7 SoCs. 75 76config RESET_INTEL_GW 77 bool "Intel Reset Controller Driver" 78 depends on OF && HAS_IOMEM 79 select REGMAP_MMIO 80 help 81 This enables the reset controller driver for Intel Gateway SoCs. 82 Say Y to control the reset signals provided by reset controller. 83 Otherwise, say N. 84 85config RESET_LANTIQ 86 bool "Lantiq XWAY Reset Driver" if COMPILE_TEST 87 default SOC_TYPE_XWAY 88 help 89 This enables the reset controller driver for Lantiq / Intel XWAY SoCs. 90 91config RESET_LPC18XX 92 bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST 93 default ARCH_LPC18XX 94 help 95 This enables the reset controller driver for NXP LPC18xx/43xx SoCs. 96 97config RESET_MESON 98 bool "Meson Reset Driver" if COMPILE_TEST 99 default ARCH_MESON 100 help 101 This enables the reset driver for Amlogic Meson SoCs. 102 103config RESET_MESON_AUDIO_ARB 104 tristate "Meson Audio Memory Arbiter Reset Driver" 105 depends on ARCH_MESON || COMPILE_TEST 106 help 107 This enables the reset driver for Audio Memory Arbiter of 108 Amlogic's A113 based SoCs 109 110config RESET_NPCM 111 bool "NPCM BMC Reset Driver" if COMPILE_TEST 112 default ARCH_NPCM 113 help 114 This enables the reset controller driver for Nuvoton NPCM 115 BMC SoCs. 116 117config RESET_OXNAS 118 bool 119 120config RESET_PISTACHIO 121 bool "Pistachio Reset Driver" if COMPILE_TEST 122 default MACH_PISTACHIO 123 help 124 This enables the reset driver for ImgTec Pistachio SoCs. 125 126config RESET_QCOM_AOSS 127 tristate "Qcom AOSS Reset Driver" 128 depends on ARCH_QCOM || COMPILE_TEST 129 help 130 This enables the AOSS (always on subsystem) reset driver 131 for Qualcomm SDM845 SoCs. Say Y if you want to control 132 reset signals provided by AOSS for Modem, Venus, ADSP, 133 GPU, Camera, Wireless, Display subsystem. Otherwise, say N. 134 135config RESET_QCOM_PDC 136 tristate "Qualcomm PDC Reset Driver" 137 depends on ARCH_QCOM || COMPILE_TEST 138 help 139 This enables the PDC (Power Domain Controller) reset driver 140 for Qualcomm Technologies Inc SDM845 SoCs. Say Y if you want 141 to control reset signals provided by PDC for Modem, Compute, 142 Display, GPU, Debug, AOP, Sensors, Audio, SP and APPS. 143 144config RESET_SCMI 145 tristate "Reset driver controlled via ARM SCMI interface" 146 depends on ARM_SCMI_PROTOCOL || COMPILE_TEST 147 default ARM_SCMI_PROTOCOL 148 help 149 This driver provides support for reset signal/domains that are 150 controlled by firmware that implements the SCMI interface. 151 152 This driver uses SCMI Message Protocol to interact with the 153 firmware controlling all the reset signals. 154 155config RESET_SIMPLE 156 bool "Simple Reset Controller Driver" if COMPILE_TEST 157 default ARCH_AGILEX || ARCH_ASPEED || ARCH_BITMAIN || ARCH_REALTEK || ARCH_STM32 || ARCH_STRATIX10 || ARCH_SUNXI || ARCH_ZX || ARC 158 help 159 This enables a simple reset controller driver for reset lines that 160 that can be asserted and deasserted by toggling bits in a contiguous, 161 exclusive register space. 162 163 Currently this driver supports: 164 - Altera SoCFPGAs 165 - ASPEED BMC SoCs 166 - Bitmain BM1880 SoC 167 - Realtek SoCs 168 - RCC reset controller in STM32 MCUs 169 - Allwinner SoCs 170 - ZTE's zx2967 family 171 172config RESET_STM32MP157 173 bool "STM32MP157 Reset Driver" if COMPILE_TEST 174 default MACH_STM32MP157 175 help 176 This enables the RCC reset controller driver for STM32 MPUs. 177 178config RESET_SOCFPGA 179 bool "SoCFPGA Reset Driver" if COMPILE_TEST && !ARCH_SOCFPGA 180 default ARCH_SOCFPGA 181 select RESET_SIMPLE 182 help 183 This enables the reset driver for the SoCFPGA ARMv7 platforms. This 184 driver gets initialized early during platform init calls. 185 186config RESET_SUNXI 187 bool "Allwinner SoCs Reset Driver" if COMPILE_TEST && !ARCH_SUNXI 188 default ARCH_SUNXI 189 select RESET_SIMPLE 190 help 191 This enables the reset driver for Allwinner SoCs. 192 193config RESET_TI_SCI 194 tristate "TI System Control Interface (TI-SCI) reset driver" 195 depends on TI_SCI_PROTOCOL 196 help 197 This enables the reset driver support over TI System Control Interface 198 available on some new TI's SoCs. If you wish to use reset resources 199 managed by the TI System Controller, say Y here. Otherwise, say N. 200 201config RESET_TI_SYSCON 202 tristate "TI SYSCON Reset Driver" 203 depends on HAS_IOMEM 204 select MFD_SYSCON 205 help 206 This enables the reset driver support for TI devices with 207 memory-mapped reset registers as part of a syscon device node. If 208 you wish to use the reset framework for such memory-mapped devices, 209 say Y here. Otherwise, say N. 210 211config RESET_UNIPHIER 212 tristate "Reset controller driver for UniPhier SoCs" 213 depends on ARCH_UNIPHIER || COMPILE_TEST 214 depends on OF && MFD_SYSCON 215 default ARCH_UNIPHIER 216 help 217 Support for reset controllers on UniPhier SoCs. 218 Say Y if you want to control reset signals provided by System Control 219 block, Media I/O block, Peripheral Block. 220 221config RESET_UNIPHIER_GLUE 222 tristate "Reset driver in glue layer for UniPhier SoCs" 223 depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF 224 default ARCH_UNIPHIER 225 select RESET_SIMPLE 226 help 227 Support for peripheral core reset included in its own glue layer 228 on UniPhier SoCs. Say Y if you want to control reset signals 229 provided by the glue layer. 230 231config RESET_ZYNQ 232 bool "ZYNQ Reset Driver" if COMPILE_TEST 233 default ARCH_ZYNQ 234 help 235 This enables the reset controller driver for Xilinx Zynq SoCs. 236 237source "drivers/reset/sti/Kconfig" 238source "drivers/reset/hisilicon/Kconfig" 239source "drivers/reset/tegra/Kconfig" 240 241endif 242