1 2config CLKDEV_LOOKUP 3 bool 4 select HAVE_CLK 5 6config HAVE_CLK_PREPARE 7 bool 8 9config COMMON_CLK 10 bool 11 select HAVE_CLK_PREPARE 12 select CLKDEV_LOOKUP 13 select SRCU 14 select RATIONAL 15 ---help--- 16 The common clock framework is a single definition of struct 17 clk, useful across many platforms, as well as an 18 implementation of the clock API in include/linux/clk.h. 19 Architectures utilizing the common struct clk should select 20 this option. 21 22menu "Common Clock Framework" 23 depends on COMMON_CLK 24 25config COMMON_CLK_WM831X 26 tristate "Clock driver for WM831x/2x PMICs" 27 depends on MFD_WM831X 28 ---help--- 29 Supports the clocking subsystem of the WM831x/2x series of 30 PMICs from Wolfson Microelectronics. 31 32source "drivers/clk/versatile/Kconfig" 33 34config COMMON_CLK_MAX77686 35 tristate "Clock driver for Maxim 77620/77686/77802 MFD" 36 depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST 37 ---help--- 38 This driver supports Maxim 77620/77686/77802 crystal oscillator 39 clock. 40 41config COMMON_CLK_RK808 42 tristate "Clock driver for RK808/RK818" 43 depends on MFD_RK808 44 ---help--- 45 This driver supports RK808 and RK818 crystal oscillator clock. These 46 multi-function devices have two fixed-rate oscillators, 47 clocked at 32KHz each. Clkout1 is always on, Clkout2 can off 48 by control register. 49 50config COMMON_CLK_HI655X 51 tristate "Clock driver for Hi655x" 52 depends on MFD_HI655X_PMIC || COMPILE_TEST 53 ---help--- 54 This driver supports the hi655x PMIC clock. This 55 multi-function device has one fixed-rate oscillator, clocked 56 at 32KHz. 57 58config COMMON_CLK_SCPI 59 tristate "Clock driver controlled via SCPI interface" 60 depends on ARM_SCPI_PROTOCOL || COMPILE_TEST 61 ---help--- 62 This driver provides support for clocks that are controlled 63 by firmware that implements the SCPI interface. 64 65 This driver uses SCPI Message Protocol to interact with the 66 firmware providing all the clock controls. 67 68config COMMON_CLK_SI5351 69 tristate "Clock driver for SiLabs 5351A/B/C" 70 depends on I2C 71 select REGMAP_I2C 72 select RATIONAL 73 ---help--- 74 This driver supports Silicon Labs 5351A/B/C programmable clock 75 generators. 76 77config COMMON_CLK_SI514 78 tristate "Clock driver for SiLabs 514 devices" 79 depends on I2C 80 depends on OF 81 select REGMAP_I2C 82 help 83 ---help--- 84 This driver supports the Silicon Labs 514 programmable clock 85 generator. 86 87config COMMON_CLK_SI570 88 tristate "Clock driver for SiLabs 570 and compatible devices" 89 depends on I2C 90 depends on OF 91 select REGMAP_I2C 92 help 93 ---help--- 94 This driver supports Silicon Labs 570/571/598/599 programmable 95 clock generators. 96 97config COMMON_CLK_CDCE706 98 tristate "Clock driver for TI CDCE706 clock synthesizer" 99 depends on I2C 100 select REGMAP_I2C 101 select RATIONAL 102 ---help--- 103 This driver supports TI CDCE706 programmable 3-PLL clock synthesizer. 104 105config COMMON_CLK_CDCE925 106 tristate "Clock driver for TI CDCE913/925/937/949 devices" 107 depends on I2C 108 depends on OF 109 select REGMAP_I2C 110 help 111 ---help--- 112 This driver supports the TI CDCE913/925/937/949 programmable clock 113 synthesizer. Each chip has different number of PLLs and outputs. 114 For example, the CDCE925 contains two PLLs with spread-spectrum 115 clocking support and five output dividers. The driver only supports 116 the following setup, and uses a fixed setting for the output muxes. 117 Y1 is derived from the input clock 118 Y2 and Y3 derive from PLL1 119 Y4 and Y5 derive from PLL2 120 Given a target output frequency, the driver will set the PLL and 121 divider to best approximate the desired output. 122 123config COMMON_CLK_CS2000_CP 124 tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier" 125 depends on I2C 126 help 127 If you say yes here you get support for the CS2000 clock multiplier. 128 129config COMMON_CLK_GEMINI 130 bool "Clock driver for Cortina Systems Gemini SoC" 131 depends on ARCH_GEMINI || COMPILE_TEST 132 select MFD_SYSCON 133 select RESET_CONTROLLER 134 ---help--- 135 This driver supports the SoC clocks on the Cortina Systems Gemini 136 platform, also known as SL3516 or CS3516. 137 138config COMMON_CLK_S2MPS11 139 tristate "Clock driver for S2MPS1X/S5M8767 MFD" 140 depends on MFD_SEC_CORE || COMPILE_TEST 141 ---help--- 142 This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator 143 clock. These multi-function devices have two (S2MPS14) or three 144 (S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each. 145 146config CLK_TWL6040 147 tristate "External McPDM functional clock from twl6040" 148 depends on TWL6040_CORE 149 ---help--- 150 Enable the external functional clock support on OMAP4+ platforms for 151 McPDM. McPDM module is using the external bit clock on the McPDM bus 152 as functional clock. 153 154config COMMON_CLK_AXI_CLKGEN 155 tristate "AXI clkgen driver" 156 depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST 157 help 158 ---help--- 159 Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx 160 FPGAs. It is commonly used in Analog Devices' reference designs. 161 162config CLK_QORIQ 163 bool "Clock driver for Freescale QorIQ platforms" 164 depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF 165 ---help--- 166 This adds the clock driver support for Freescale QorIQ platforms 167 using common clock framework. 168 169config COMMON_CLK_XGENE 170 bool "Clock driver for APM XGene SoC" 171 default y 172 depends on ARM64 || COMPILE_TEST 173 ---help--- 174 Sypport for the APM X-Gene SoC reference, PLL, and device clocks. 175 176config COMMON_CLK_NXP 177 def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX) 178 select REGMAP_MMIO if ARCH_LPC32XX 179 select MFD_SYSCON if ARCH_LPC18XX 180 ---help--- 181 Support for clock providers on NXP platforms. 182 183config COMMON_CLK_PALMAS 184 tristate "Clock driver for TI Palmas devices" 185 depends on MFD_PALMAS 186 ---help--- 187 This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO 188 using common clock framework. 189 190config COMMON_CLK_PWM 191 tristate "Clock driver for PWMs used as clock outputs" 192 depends on PWM 193 ---help--- 194 Adapter driver so that any PWM output can be (mis)used as clock signal 195 at 50% duty cycle. 196 197config COMMON_CLK_PXA 198 def_bool COMMON_CLK && ARCH_PXA 199 ---help--- 200 Support for the Marvell PXA SoC. 201 202config COMMON_CLK_PIC32 203 def_bool COMMON_CLK && MACH_PIC32 204 205config COMMON_CLK_OXNAS 206 bool "Clock driver for the OXNAS SoC Family" 207 depends on ARCH_OXNAS || COMPILE_TEST 208 select MFD_SYSCON 209 ---help--- 210 Support for the OXNAS SoC Family clocks. 211 212config COMMON_CLK_VC5 213 tristate "Clock driver for IDT VersaClock5 devices" 214 depends on I2C 215 depends on OF 216 select REGMAP_I2C 217 help 218 ---help--- 219 This driver supports the IDT VersaClock5 programmable clock 220 generator. 221 222source "drivers/clk/bcm/Kconfig" 223source "drivers/clk/hisilicon/Kconfig" 224source "drivers/clk/imgtec/Kconfig" 225source "drivers/clk/keystone/Kconfig" 226source "drivers/clk/mediatek/Kconfig" 227source "drivers/clk/meson/Kconfig" 228source "drivers/clk/mvebu/Kconfig" 229source "drivers/clk/qcom/Kconfig" 230source "drivers/clk/renesas/Kconfig" 231source "drivers/clk/samsung/Kconfig" 232source "drivers/clk/sunxi-ng/Kconfig" 233source "drivers/clk/tegra/Kconfig" 234source "drivers/clk/ti/Kconfig" 235source "drivers/clk/uniphier/Kconfig" 236 237endmenu 238