1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Broadcom BRCMSTB/BMIPS SDHCI Controller 8 9maintainers: 10 - Al Cooper <alcooperx@gmail.com> 11 - Florian Fainelli <f.fainelli@gmail.com> 12 13properties: 14 compatible: 15 oneOf: 16 - items: 17 - enum: 18 - brcm,bcm7216-sdhci 19 - const: brcm,bcm7445-sdhci 20 - const: brcm,sdhci-brcmstb 21 - items: 22 - enum: 23 - brcm,bcm2712-sdhci 24 - brcm,bcm74165b0-sdhci 25 - brcm,bcm7445-sdhci 26 - brcm,bcm7425-sdhci 27 - const: brcm,sdhci-brcmstb 28 29 reg: 30 maxItems: 2 31 32 reg-names: 33 items: 34 - const: host 35 - const: cfg 36 37 interrupts: 38 maxItems: 1 39 40 clocks: 41 minItems: 1 42 items: 43 - description: handle to core clock for the sdhci controller 44 - description: handle to improved 150Mhz clock for sdhci controller (Optional clock) 45 46 clock-names: 47 minItems: 1 48 items: 49 - const: sw_sdio 50 - const: sdio_freq # Optional clock 51 52 clock-frequency: 53 description: 54 Maximum operating frequency of sdio_freq sdhci controller clock 55 $ref: /schemas/types.yaml#/definitions/uint32 56 minimum: 100000000 57 maximum: 150000000 58 59 sdhci,auto-cmd12: 60 type: boolean 61 description: Specifies that controller should use auto CMD12 62 63allOf: 64 - $ref: mmc-controller.yaml# 65 - if: 66 properties: 67 clock-names: 68 contains: 69 const: sdio_freq 70 71 then: 72 required: 73 - clock-frequency 74 75required: 76 - compatible 77 - reg 78 - interrupts 79 - clocks 80 - clock-names 81 82unevaluatedProperties: false 83 84examples: 85 - | 86 mmc@84b0000 { 87 compatible = "brcm,bcm7216-sdhci", 88 "brcm,bcm7445-sdhci", 89 "brcm,sdhci-brcmstb"; 90 reg = <0x84b0000 0x260>, <0x84b0300 0x200>; 91 reg-names = "host", "cfg"; 92 sd-uhs-sdr50; 93 sd-uhs-ddr50; 94 sd-uhs-sdr104; 95 sdhci,auto-cmd12; 96 interrupts = <0x0 0x26 0x4>; 97 clocks = <&scmi_clk 245>; 98 clock-names = "sw_sdio"; 99 }; 100 101 mmc@84b1000 { 102 compatible = "brcm,bcm7216-sdhci", 103 "brcm,bcm7445-sdhci", 104 "brcm,sdhci-brcmstb"; 105 reg = <0x84b1000 0x260>, <0x84b1300 0x200>; 106 reg-names = "host", "cfg"; 107 mmc-ddr-1_8v; 108 mmc-hs200-1_8v; 109 mmc-hs400-1_8v; 110 mmc-hs400-enhanced-strobe; 111 supports-cqe; 112 non-removable; 113 bus-width = <0x8>; 114 interrupts = <0x0 0x27 0x4>; 115 clocks = <&scmi_clk 245>; 116 clock-names = "sw_sdio"; 117 }; 118