# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- $id: http://devicetree.org/schemas/mmc/brcm,sdhci-brcmstb.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Broadcom BRCMSTB/BMIPS SDHCI Controller maintainers: - Al Cooper - Florian Fainelli properties: compatible: oneOf: - items: - enum: - brcm,bcm7216-sdhci - const: brcm,bcm7445-sdhci - const: brcm,sdhci-brcmstb - items: - enum: - brcm,bcm2712-sdhci - brcm,bcm74165b0-sdhci - brcm,bcm7445-sdhci - brcm,bcm7425-sdhci - const: brcm,sdhci-brcmstb reg: maxItems: 2 reg-names: items: - const: host - const: cfg interrupts: maxItems: 1 clocks: minItems: 1 items: - description: handle to core clock for the sdhci controller - description: handle to improved 150Mhz clock for sdhci controller (Optional clock) clock-names: minItems: 1 items: - const: sw_sdio - const: sdio_freq # Optional clock clock-frequency: description: Maximum operating frequency of sdio_freq sdhci controller clock $ref: /schemas/types.yaml#/definitions/uint32 minimum: 100000000 maximum: 150000000 sdhci,auto-cmd12: type: boolean description: Specifies that controller should use auto CMD12 allOf: - $ref: mmc-controller.yaml# - if: properties: clock-names: contains: const: sdio_freq then: required: - clock-frequency required: - compatible - reg - interrupts - clocks - clock-names unevaluatedProperties: false examples: - | mmc@84b0000 { compatible = "brcm,bcm7216-sdhci", "brcm,bcm7445-sdhci", "brcm,sdhci-brcmstb"; reg = <0x84b0000 0x260>, <0x84b0300 0x200>; reg-names = "host", "cfg"; sd-uhs-sdr50; sd-uhs-ddr50; sd-uhs-sdr104; sdhci,auto-cmd12; interrupts = <0x0 0x26 0x4>; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; }; mmc@84b1000 { compatible = "brcm,bcm7216-sdhci", "brcm,bcm7445-sdhci", "brcm,sdhci-brcmstb"; reg = <0x84b1000 0x260>, <0x84b1300 0x200>; reg-names = "host", "cfg"; mmc-ddr-1_8v; mmc-hs200-1_8v; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe; supports-cqe; non-removable; bus-width = <0x8>; interrupts = <0x0 0x27 0x4>; clocks = <&scmi_clk 245>; clock-names = "sw_sdio"; };