| /linux/arch/arm/boot/dts/ti/omap/ |
| H A D | dra72x-mmc-iodelay.dtsi | 37 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
38 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
39 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
40 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
41 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
42 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
48 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
49 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
50 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
51 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
[all …]
|
| H A D | dra76x-mmc-iodelay.dtsi | 32 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
33 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
34 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
35 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
36 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
37 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
43 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_clk.clk */
44 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_cmd.cmd */
45 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat0.dat0 */
46 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_VIRTUAL_MODE11 | MUX_MODE0) /* mmc1_dat1.dat1 */
[all …]
|
| H A D | dra74x-mmc-iodelay.dtsi | 35 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
36 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
37 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
38 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
39 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
40 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
46 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
47 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
48 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
49 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
[all …]
|
| /linux/arch/arm/boot/dts/nxp/imx/ |
| H A D | imx53-pinfunc.h | 13 #define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0
14 #define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0
15 #define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0
16 #define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0
17 #define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0
18 #define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0
19 #define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0
20 #define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0
21 #define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0
22 #define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0
[all …]
|
| H A D | imx6q-pinfunc.h | 13 #define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0
14 #define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0
15 #define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0
16 #define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0
17 #define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0
18 #define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0
19 #define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0
20 #define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0
21 #define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0
22 #define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0
[all …]
|
| H A D | imx35-pinfunc.h | 13 #define MX35_PAD_CAPTURE__GPT_CAPIN1 0x004 0x328 0x000 0x0 0x0
14 #define MX35_PAD_CAPTURE__GPT_CMPOUT2 0x004 0x328 0x000 0x1 0x0
15 #define MX35_PAD_CAPTURE__CSPI2_SS1 0x004 0x328 0x7f4 0x2 0x0
16 #define MX35_PAD_CAPTURE__EPIT1_EPITO 0x004 0x328 0x000 0x3 0x0
17 #define MX35_PAD_CAPTURE__CCM_CLK32K 0x004 0x328 0x7d0 0x4 0x0
18 #define MX35_PAD_CAPTURE__GPIO1_4 0x004 0x328 0x850 0x5 0x0
19 #define MX35_PAD_COMPARE__GPT_CMPOUT1 0x008 0x32c 0x000 0x0 0x0
20 #define MX35_PAD_COMPARE__GPT_CAPIN2 0x008 0x32c 0x000 0x1 0x0
21 #define MX35_PAD_COMPARE__GPT_CMPOUT3 0x008 0x32c 0x000 0x2 0x0
22 #define MX35_PAD_COMPARE__EPIT2_EPITO 0x008 0x32c 0x000 0x3 0x0
[all …]
|
| H A D | imx50-pinfunc.h | 13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0
14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0
15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0
16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0
17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0
18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0
19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0
20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0
21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0
22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0
[all …]
|
| H A D | imx6sl-pinfunc.h | 13 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0
14 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0
15 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0
16 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0
17 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0
18 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0
19 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0
20 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0
21 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0
22 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0
[all …]
|
| H A D | imxrt1050-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000
17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0
18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0
19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1
20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0
21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0
22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0
24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0
25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0
26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1
[all …]
|
| H A D | imxrt1170-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000
17 #define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX 0x000 0x040 0x0 0x0 0x0
18 #define IOMUXC_GPIO_LPSR_00_MIC_CLK 0x000 0x040 0x0 0x1 0x0
19 #define IOMUXC_GPIO_LPSR_00_MQS_RIGHT 0x000 0x040 0x0 0x2 0x0
20 #define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO 0x000 0x040 0x0 0x3 0x0
21 #define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00 0x000 0x040 0x0 0x5 0x0
22 #define IOMUXC_GPIO_LPSR_00_LPUART12_TXD 0x000 0x040 0x0B0 0x6 0x0
23 #define IOMUXC_GPIO_LPSR_00_SAI4_MCLK 0x000 0x040 0x0C8 0x7 0x0
24 #define IOMUXC_GPIO_LPSR_00_GPIO12_IO00 0x000 0x040 0x0 0xA 0x0
26 #define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX 0x004 0x044 0x080 0x0 0x0
[all …]
|
| H A D | imx6dl-pinfunc.h | 13 #define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0
14 #define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0
15 #define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0
16 #define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0
17 #define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0
18 #define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0
19 #define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0
20 #define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0
21 #define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0
22 #define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0
[all …]
|
| H A D | imx51-pinfunc.h | 13 #define MX51_PAD_EIM_D16__AUD4_RXFS 0x05c 0x3f0 0x000 0x5 0x0
14 #define MX51_PAD_EIM_D16__AUD5_TXD 0x05c 0x3f0 0x8d8 0x7 0x0
15 #define MX51_PAD_EIM_D16__EIM_D16 0x05c 0x3f0 0x000 0x0 0x0
16 #define MX51_PAD_EIM_D16__GPIO2_0 0x05c 0x3f0 0x000 0x1 0x0
17 #define MX51_PAD_EIM_D16__I2C1_SDA 0x05c 0x3f0 0x9b4 0x4 0x0
18 #define MX51_PAD_EIM_D16__UART2_CTS 0x05c 0x3f0 0x000 0x3 0x0
19 #define MX51_PAD_EIM_D16__USBH2_DATA0 0x05c 0x3f0 0x000 0x2 0x0
20 #define MX51_PAD_EIM_D17__AUD5_RXD 0x060 0x3f4 0x8d4 0x7 0x0
21 #define MX51_PAD_EIM_D17__EIM_D17 0x060 0x3f4 0x000 0x0 0x0
22 #define MX51_PAD_EIM_D17__GPIO2_1 0x060 0x3f4 0x000 0x1 0x0
[all …]
|
| /linux/drivers/net/ethernet/cavium/thunder/ |
| H A D | thunder_bgx.h | 10 #define PCI_DEVICE_ID_THUNDER_BGX 0xA026
11 #define PCI_DEVICE_ID_THUNDER_RGX 0xA054
14 #define PCI_SUBSYS_DEVID_88XX_BGX 0xA126
15 #define PCI_SUBSYS_DEVID_81XX_BGX 0xA226
16 #define PCI_SUBSYS_DEVID_81XX_RGX 0xA254
17 #define PCI_SUBSYS_DEVID_83XX_BGX 0xA326
27 #define DEFAULT_PAUSE_TIME 0xFFFF
29 #define BGX_ID_MASK 0x3
30 #define LMAC_ID_MASK 0x3
35 #define BGX_CMRX_CFG 0x00
[all …]
|
| /linux/drivers/clk/qcom/ |
| H A D | nsscc-ipq5424.c | 58 { P_CMN_PLL_XO_CLK, 0 },
72 { P_CMN_PLL_XO_CLK, 0 },
90 { P_CMN_PLL_XO_CLK, 0 },
108 { P_CMN_PLL_XO_CLK, 0 },
126 F(24000000, P_CMN_PLL_XO_CLK, 1, 0, 0),
127 F(375000000, P_CMN_PLL_NSS_375M_CLK, 1, 0, 0),
132 .cmd_rcgr = 0x5e0,
133 .mnd_width = 0,
147 F(100000000, P_GCC_GPLL0_OUT_AUX, 8, 0, 0),
152 .cmd_rcgr = 0x6a8,
[all …]
|
| /linux/drivers/media/usb/gspca/ |
| H A D | stk014.c | 37 .priv = 0},
47 if (gspca_dev->usb_err < 0) in reg_r()
48 return 0; in reg_r()
49 ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), in reg_r()
50 0x00, in reg_r()
52 0x00, in reg_r()
56 if (ret < 0) { in reg_r()
59 return 0; in reg_r()
61 return gspca_dev->usb_buf[0]; in reg_r()
71 if (gspca_dev->usb_err < 0) in reg_w()
[all …]
|
| /linux/include/linux/mfd/mt6331/ |
| H A D | registers.h | 10 #define MT6331_STRUP_CON0 0x0
11 #define MT6331_STRUP_CON2 0x2
12 #define MT6331_STRUP_CON3 0x4
13 #define MT6331_STRUP_CON4 0x6
14 #define MT6331_STRUP_CON5 0x8
15 #define MT6331_STRUP_CON6 0xA
16 #define MT6331_STRUP_CON7 0xC
17 #define MT6331_STRUP_CON8 0xE
18 #define MT6331_STRUP_CON9 0x10
19 #define MT6331_STRUP_CON10 0x12
[all …]
|
| /linux/drivers/net/usb/ |
| H A D | lan78xx.h | 9 #define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
10 #define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
11 #define USB_VENDOR_REQUEST_GET_STATS 0xA2
32 #define TX_CMD_A_IGE_ (0x20000000)
33 #define TX_CMD_A_ICE_ (0x10000000)
34 #define TX_CMD_A_LSO_ (0x08000000)
35 #define TX_CMD_A_IPE_ (0x04000000)
36 #define TX_CMD_A_TPE_ (0x02000000)
37 #define TX_CMD_A_IVTG_ (0x01000000)
38 #define TX_CMD_A_RVTG_ (0x00800000)
[all …]
|
| /linux/drivers/net/wireless/ath/carl9170/ |
| H A D | hw.h | 43 #define AR9170_UART_REG_BASE 0x1c0000
46 #define AR9170_UART_REG_RX_BUFFER (AR9170_UART_REG_BASE + 0x000)
47 #define AR9170_UART_REG_TX_HOLDING (AR9170_UART_REG_BASE + 0x004)
48 #define AR9170_UART_REG_FIFO_CONTROL (AR9170_UART_REG_BASE + 0x010)
49 #define AR9170_UART_FIFO_CTRL_RESET_RX_FIFO 0x02
50 #define AR9170_UART_FIFO_CTRL_RESET_TX_FIFO 0x04
52 #define AR9170_UART_REG_LINE_CONTROL (AR9170_UART_REG_BASE + 0x014)
53 #define AR9170_UART_REG_MODEM_CONTROL (AR9170_UART_REG_BASE + 0x018)
54 #define AR9170_UART_MODEM_CTRL_DTR_BIT 0x01
55 #define AR9170_UART_MODEM_CTRL_RTS_BIT 0x02
[all …]
|
| /linux/drivers/hwmon/ |
| H A D | intel-m10-bmc-hwmon.c | 38 { 0x100, 0x104, 0x108, 0x10c, 0x0, 500, "Board Temperature" },
39 { 0x110, 0x114, 0x118, 0x0, 0x0, 500, "FPGA Die Temperature" },
40 { 0x11c, 0x124, 0x120, 0x0, 0x0, 500, "QSFP0 Temperature" },
41 { 0x12c, 0x134, 0x130, 0x0, 0x0, 500, "QSFP1 Temperature" },
42 { 0x168, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A Temperature" },
43 { 0x16c, 0x0, 0x0, 0x0, 0x0, 500, "Retimer A SerDes Temperature" },
44 { 0x170, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B Temperature" },
45 { 0x174, 0x0, 0x0, 0x0, 0x0, 500, "Retimer B SerDes Temperature" },
49 { 0x128, 0x0, 0x0, 0x0, 0x0, 1, "QSFP0 Supply Voltage" },
50 { 0x138, 0x0, 0x0, 0x0, 0x0, 1, "QSFP1 Supply Voltage" },
[all …]
|
| /linux/drivers/net/wireless/broadcom/b43/ |
| H A D | phy_lcn.c | 66 b43_radio_set(dev, 0x09d, 0x4); in b43_radio_2064_channel_setup()
67 b43_radio_write(dev, 0x09e, 0xf); in b43_radio_2064_channel_setup()
70 b43_radio_write(dev, 0x02a, 0xb); in b43_radio_2064_channel_setup()
71 b43_radio_maskset(dev, 0x030, ~0x3, 0xa); in b43_radio_2064_channel_setup()
72 b43_radio_maskset(dev, 0x091, ~0x3, 0); in b43_radio_2064_channel_setup()
73 b43_radio_maskset(dev, 0x038, ~0xf, 0x7); in b43_radio_2064_channel_setup()
74 b43_radio_maskset(dev, 0x030, ~0xc, 0x8); in b43_radio_2064_channel_setup()
75 b43_radio_maskset(dev, 0x05e, ~0xf, 0x8); in b43_radio_2064_channel_setup()
76 b43_radio_maskset(dev, 0x05e, ~0xf0, 0x80); in b43_radio_2064_channel_setup()
77 b43_radio_write(dev, 0x06c, 0x80); in b43_radio_2064_channel_setup()
[all …]
|
| /linux/drivers/net/wireless/mediatek/mt76/mt7915/ |
| H A D | regs.h | 130 #define MT_MCU_WFDMA0_BASE 0x2000
133 #define MT_MCU_WFDMA0_DUMMY_CR MT_MCU_WFDMA0(0x120)
136 #define MT_MCU_WFDMA1_BASE 0x3000
140 #define MT_MCU_INT_EVENT_DMA_STOPPED BIT(0)
146 #define MT_PLE_BASE 0x820c0000
149 #define MT_PLE_HOST_RPT0 MT_PLE(0x030)
154 #define MT_FL_Q2_CTRL MT_PLE(__OFFS(PLE_FL_Q_CTRL) + 0x8)
155 #define MT_FL_Q3_CTRL MT_PLE(__OFFS(PLE_FL_Q_CTRL) + 0xc)
165 #define MT_PLE_AMSDU_PACK_MSDU_CNT(n) MT_PLE(0x10e0 + ((n) << 2))
167 #define MT_PSE_BASE 0x820c8000
[all …]
|
| /linux/drivers/clk/tegra/ |
| H A D | clk-tegra-periph.c | 18 #define CLK_SOURCE_I2S0 0x1d8
19 #define CLK_SOURCE_I2S1 0x100
20 #define CLK_SOURCE_I2S2 0x104
21 #define CLK_SOURCE_NDFLASH 0x160
22 #define CLK_SOURCE_I2S3 0x3bc
23 #define CLK_SOURCE_I2S4 0x3c0
24 #define CLK_SOURCE_SPDIF_OUT 0x108
25 #define CLK_SOURCE_SPDIF_IN 0x10c
26 #define CLK_SOURCE_PWM 0x110
27 #define CLK_SOURCE_ADX 0x638
[all …]
|
| /linux/drivers/clk/stm32/ |
| H A D | stm32mp13_rcc.h | 11 #define RCC_SECCFGR 0x0
12 #define RCC_MP_SREQSETR 0x100
13 #define RCC_MP_SREQCLRR 0x104
14 #define RCC_MP_APRSTCR 0x108
15 #define RCC_MP_APRSTSR 0x10c
16 #define RCC_PWRLPDLYCR 0x110
17 #define RCC_MP_GRSTCSETR 0x114
18 #define RCC_BR_RSTSCLRR 0x118
19 #define RCC_MP_RSTSSETR 0x11c
20 #define RCC_MP_RSTSCLRR 0x120
[all …]
|
| /linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/ |
| H A D | d11.h | 27 #define RX_FIFO 0 /* data and ctl frames */
31 #define TX_AC_BK_FIFO 0 /* Background TX FIFO */
41 #define M_AC_TXLMT_BASE_ADDR (0x180 * 2)
109 u32 PAD[3]; /* 0x0 - 0x8 */
110 u32 biststatus; /* 0xC */
111 u32 biststatus2; /* 0x10 */
112 u32 PAD; /* 0x14 */
113 u32 gptimer; /* 0x18 */
114 u32 usectimer; /* 0x1c *//* for corerev >= 26 */
116 /* Interrupt Control *//* 0x20 */
[all …]
|
| /linux/sound/soc/codecs/ |
| H A D | wm2200.h | 14 #define WM2200_CLKSRC_MCLK1 0
19 #define WM2200_FLL_SRC_MCLK1 0
26 #define WM2200_SOFTWARE_RESET 0x00
27 #define WM2200_DEVICE_REVISION 0x01
28 #define WM2200_TONE_GENERATOR_1 0x0B
29 #define WM2200_CLOCKING_3 0x102
30 #define WM2200_CLOCKING_4 0x103
31 #define WM2200_FLL_CONTROL_1 0x111
32 #define WM2200_FLL_CONTROL_2 0x112
33 #define WM2200_FLL_CONTROL_3 0x113
[all …]
|