/freebsd/sys/contrib/device-tree/src/arm64/freescale/ |
H A D | imx8mn-bsh-smm-s2pro.dts | 18 reg = <0x0 0x40000000 0x0 0x20000000>; 50 pinctrl-0 = <&pinctrl_i2c2>; 56 pinctrl-0 = <&pinctrl_dac_rst>; 57 reg = <0x18>; 58 #sound-dai-cells = <0>; 73 pinctrl-0 = <&pinctrl_sai3>; 84 pinctrl-0 = <&pinctrl_usdhc1>; 95 MX8MN_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x19 /* DAC_RST */ 101 MX8MN_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK 0x082 102 MX8MN_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI 0x082 [all …]
|
H A D | imx8mn-bsh-smm-s2-common.dtsi | 30 pinctrl-0 = <&pinctrl_usdhc2_pwrseq>; 53 pinctrl-0 = <&pinctrl_espi2>; 59 pinctrl-0 = <&pinctrl_fec1>; 68 #size-cells = <0>; 70 ethphy0: ethernet-phy@0 { 72 reg = <0>; 83 pinctrl-0 = <&pinctrl_i2c1>; 88 reg = <0x4b>; 90 pinctrl-0 = <&pinctrl_pmic>; 95 #clock-cells = <0>; [all...] |
H A D | imx8mp-pinfunc.h | 13 #define MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x014 0x274 0x000 0x0 0x0 14 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_ENET_PHY_REF_CLK_ROOT 0x014 0x274 0x000 0x1 0x0 15 #define MX8MP_IOMUXC_GPIO1_IO00__ISP_FL_TRIG_0 0x014 0x274 0x5D4 0x3 0x0 16 #define MX8MP_IOMUXC_GPIO1_IO00__CCM_EXT_CLK1 0x014 0x274 0x000 0x6 0x0 17 #define MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x018 0x278 0x000 0x0 0x0 18 #define MX8MP_IOMUXC_GPIO1_IO01__PWM1_OUT 0x018 0x278 0x000 0x1 0x0 19 #define MX8MP_IOMUXC_GPIO1_IO01__ISP_SHUTTER_TRIG_0 0x018 0x278 0x5DC 0x3 0x0 20 #define MX8MP_IOMUXC_GPIO1_IO01__CCM_EXT_CLK2 0x018 0x278 0x000 0x6 0x0 21 #define MX8MP_IOMUXC_GPIO1_IO02__GPIO1_IO02 0x01C 0x27C 0x000 0x0 0x0 22 #define MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x01C 0x27C 0x000 0x1 0x0 [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imxrt1170-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define IOMUXC_GPIO_LPSR_00_FLEXCAN3_TX 0x000 0x040 0x0 0x0 0x0 18 #define IOMUXC_GPIO_LPSR_00_MIC_CLK 0x000 0x040 0x0 0x1 0x0 19 #define IOMUXC_GPIO_LPSR_00_MQS_RIGHT 0x000 0x040 0x0 0x2 0x0 20 #define IOMUXC_GPIO_LPSR_00_ARM_CM4_EVENTO 0x000 0x040 0x0 0x3 0x0 21 #define IOMUXC_GPIO_LPSR_00_GPIO_MUX6_IO00 0x000 0x040 0x0 0x5 0x0 22 #define IOMUXC_GPIO_LPSR_00_LPUART12_TXD 0x000 0x040 0x0B0 0x6 0x0 23 #define IOMUXC_GPIO_LPSR_00_SAI4_MCLK 0x000 0x040 0x0C8 0x7 0x0 24 #define IOMUXC_GPIO_LPSR_00_GPIO12_IO00 0x000 0x040 0x0 0xA 0x0 26 #define IOMUXC_GPIO_LPSR_01_FLEXCAN3_RX 0x004 0x044 0x080 0x0 0x0 [all …]
|
H A D | imxrt1050-pinfunc.h | 10 #define IMX_PAD_SION 0x40000000 17 #define MXRT1050_IOMUXC_GPIO_EMC_00_SEMC_DA00 0x014 0x204 0x000 0x0 0x0 18 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXPWM4_PWM0_A 0x014 0x204 0x494 0x1 0x0 19 #define MXRT1050_IOMUXC_GPIO_EMC_00_LPSPI2_SCK 0x014 0x204 0x500 0x2 0x1 20 #define MXRT1050_IOMUXC_GPIO_EMC_00_XBAR_INOUT2 0x014 0x204 0x60C 0x3 0x0 21 #define MXRT1050_IOMUXC_GPIO_EMC_00_FLEXIO1_D00 0x014 0x204 0x000 0x4 0x0 22 #define MXRT1050_IOMUXC_GPIO_EMC_00_GPIO4_IO00 0x014 0x204 0x000 0x5 0x0 24 #define MXRT1050_IOMUXC_GPIO_EMC_01_SEMC_DA01 0x018 0x208 0x000 0x0 0x0 25 #define MXRT1050_IOMUXC_GPIO_EMC_01_FLEXPWM4_PWM0_B 0x018 0x208 0x000 0x1 0x0 26 #define MXRT1050_IOMUXC_GPIO_EMC_01_LPSPI2_PCS0 0x018 0x208 0x4FC 0x2 0x1 [all …]
|
H A D | imx50-pinfunc.h | 13 #define MX50_PAD_KEY_COL0__KPP_COL_0 0x020 0x2cc 0x000 0x0 0x0 14 #define MX50_PAD_KEY_COL0__GPIO4_0 0x020 0x2cc 0x000 0x1 0x0 15 #define MX50_PAD_KEY_COL0__EIM_NANDF_CLE 0x020 0x2cc 0x000 0x2 0x0 16 #define MX50_PAD_KEY_COL0__CTI_TRIGIN7 0x020 0x2cc 0x000 0x6 0x0 17 #define MX50_PAD_KEY_COL0__USBPHY1_TXREADY 0x020 0x2cc 0x000 0x7 0x0 18 #define MX50_PAD_KEY_ROW0__KPP_ROW_0 0x024 0x2d0 0x000 0x0 0x0 19 #define MX50_PAD_KEY_ROW0__GPIO4_1 0x024 0x2d0 0x000 0x1 0x0 20 #define MX50_PAD_KEY_ROW0__EIM_NANDF_ALE 0x024 0x2d0 0x000 0x2 0x0 21 #define MX50_PAD_KEY_ROW0__CTI_TRIGIN_ACK7 0x024 0x2d0 0x000 0x6 0x0 22 #define MX50_PAD_KEY_ROW0__USBPHY1_RXVALID 0x024 0x2d0 0x000 0x7 0x0 [all …]
|
H A D | imx6q-pinfunc.h | 13 #define MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x04c 0x360 0x000 0x0 0x0 14 #define MX6QDL_PAD_SD2_DAT1__ECSPI5_SS0 0x04c 0x360 0x834 0x1 0x0 15 #define MX6QDL_PAD_SD2_DAT1__EIM_CS2_B 0x04c 0x360 0x000 0x2 0x0 16 #define MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x04c 0x360 0x7c8 0x3 0x0 17 #define MX6QDL_PAD_SD2_DAT1__KEY_COL7 0x04c 0x360 0x8f0 0x4 0x0 18 #define MX6QDL_PAD_SD2_DAT1__GPIO1_IO14 0x04c 0x360 0x000 0x5 0x0 19 #define MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x050 0x364 0x000 0x0 0x0 20 #define MX6QDL_PAD_SD2_DAT2__ECSPI5_SS1 0x050 0x364 0x838 0x1 0x0 21 #define MX6QDL_PAD_SD2_DAT2__EIM_CS3_B 0x050 0x364 0x000 0x2 0x0 22 #define MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x050 0x364 0x7b8 0x3 0x0 [all …]
|
H A D | imx53-pinfunc.h | 13 #define MX53_PAD_GPIO_19__KPP_COL_5 0x020 0x348 0x840 0x0 0x0 14 #define MX53_PAD_GPIO_19__GPIO4_5 0x020 0x348 0x000 0x1 0x0 15 #define MX53_PAD_GPIO_19__CCM_CLKO 0x020 0x348 0x000 0x2 0x0 16 #define MX53_PAD_GPIO_19__SPDIF_OUT1 0x020 0x348 0x000 0x3 0x0 17 #define MX53_PAD_GPIO_19__RTC_CE_RTC_EXT_TRIG2 0x020 0x348 0x000 0x4 0x0 18 #define MX53_PAD_GPIO_19__ECSPI1_RDY 0x020 0x348 0x000 0x5 0x0 19 #define MX53_PAD_GPIO_19__FEC_TDATA_3 0x020 0x348 0x000 0x6 0x0 20 #define MX53_PAD_GPIO_19__SRC_INT_BOOT 0x020 0x348 0x000 0x7 0x0 21 #define MX53_PAD_KEY_COL0__KPP_COL_0 0x024 0x34c 0x000 0x0 0x0 22 #define MX53_PAD_KEY_COL0__GPIO4_6 0x024 0x34c 0x000 0x1 0x0 [all …]
|
H A D | imx6sl-pinfunc.h | 13 #define MX6SL_PAD_AUD_MCLK__AUDIO_CLK_OUT 0x04c 0x2a4 0x000 0x0 0x0 14 #define MX6SL_PAD_AUD_MCLK__PWM4_OUT 0x04c 0x2a4 0x000 0x1 0x0 15 #define MX6SL_PAD_AUD_MCLK__ECSPI3_RDY 0x04c 0x2a4 0x6b4 0x2 0x0 16 #define MX6SL_PAD_AUD_MCLK__FEC_MDC 0x04c 0x2a4 0x000 0x3 0x0 17 #define MX6SL_PAD_AUD_MCLK__WDOG2_RESET_B_DEB 0x04c 0x2a4 0x000 0x4 0x0 18 #define MX6SL_PAD_AUD_MCLK__GPIO1_IO06 0x04c 0x2a4 0x000 0x5 0x0 19 #define MX6SL_PAD_AUD_MCLK__SPDIF_EXT_CLK 0x04c 0x2a4 0x7f4 0x6 0x0 20 #define MX6SL_PAD_AUD_RXC__AUD3_RXC 0x050 0x2a8 0x000 0x0 0x0 21 #define MX6SL_PAD_AUD_RXC__I2C1_SDA 0x050 0x2a8 0x720 0x1 0x0 22 #define MX6SL_PAD_AUD_RXC__UART3_TX_DATA 0x050 0x2a8 0x000 0x2 0x0 [all …]
|
H A D | imx6dl-pinfunc.h | 13 #define MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x04c 0x360 0x000 0x0 0x0 14 #define MX6QDL_PAD_CSI0_DAT10__AUD3_RXC 0x04c 0x360 0x000 0x1 0x0 15 #define MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x04c 0x360 0x7f8 0x2 0x0 16 #define MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x04c 0x360 0x000 0x3 0x0 17 #define MX6QDL_PAD_CSI0_DAT10__UART1_RX_DATA 0x04c 0x360 0x8fc 0x3 0x0 18 #define MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x04c 0x360 0x000 0x5 0x0 19 #define MX6QDL_PAD_CSI0_DAT10__ARM_TRACE07 0x04c 0x360 0x000 0x7 0x0 20 #define MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x050 0x364 0x000 0x0 0x0 21 #define MX6QDL_PAD_CSI0_DAT11__AUD3_RXFS 0x050 0x364 0x000 0x1 0x0 22 #define MX6QDL_PAD_CSI0_DAT11__ECSPI2_SS0 0x050 0x364 0x800 0x2 0x0 [all …]
|
H A D | imx35-pinfunc.h | 13 #define MX35_PAD_CAPTURE__GPT_CAPIN1 0x004 0x328 0x000 0x0 0x0 14 #define MX35_PAD_CAPTURE__GPT_CMPOUT2 0x004 0x328 0x000 0x1 0x0 15 #define MX35_PAD_CAPTURE__CSPI2_SS1 0x004 0x328 0x7f4 0x2 0x0 16 #define MX35_PAD_CAPTURE__EPIT1_EPITO 0x004 0x328 0x000 0x3 0x0 17 #define MX35_PAD_CAPTURE__CCM_CLK32K 0x004 0x328 0x7d0 0x4 0x0 18 #define MX35_PAD_CAPTURE__GPIO1_4 0x004 0x328 0x850 0x5 0x0 19 #define MX35_PAD_COMPARE__GPT_CMPOUT1 0x008 0x32c 0x000 0x0 0x0 20 #define MX35_PAD_COMPARE__GPT_CAPIN2 0x008 0x32c 0x000 0x1 0x0 21 #define MX35_PAD_COMPARE__GPT_CMPOUT3 0x008 0x32c 0x000 0x2 0x0 22 #define MX35_PAD_COMPARE__EPIT2_EPITO 0x008 0x32c 0x000 0x3 0x0 [all …]
|
/freebsd/sys/contrib/dev/mediatek/mt76/mt7603/ |
H A D | eeprom.h | 9 MT_EE_CHIP_ID = 0x000, 10 MT_EE_VERSION = 0x002, 11 MT_EE_MAC_ADDR = 0x004, 12 MT_EE_NIC_CONF_0 = 0x034, 13 MT_EE_NIC_CONF_1 = 0x036, 14 MT_EE_NIC_CONF_2 = 0x042, 16 MT_EE_XTAL_TRIM_1 = 0x03a, 18 MT_EE_RSSI_OFFSET_2G = 0x046, 19 MT_EE_WIFI_RF_SETTING = 0x048, 20 MT_EE_RSSI_OFFSET_5G = 0x04a, [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/hisilicon/ |
H A D | hikey960-pinctrl.dtsi | 18 reg = <0x0 0xe896c000 0x0 0x1f0>; 20 #gpio-range-cells = <0x3>; 21 pinctrl-single,register-width = <0x20>; 22 pinctrl-single,function-mask = <0x7>; 25 &range 0 7 0 26 &range 8 116 0>; 30 0x008 MUX_M1 /* PMU1_SSI */ 31 0x00c MUX_M1 /* PMU2_SSI */ 32 0x010 MUX_M1 /* PMU_CLKOUT */ 33 0x100 MUX_M1 /* PMU_HKADC_SSI */ [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/nxp/vf/ |
H A D | vf610-pinfunc.h | 14 #define ALT0 0x0 15 #define ALT1 0x1 16 #define ALT2 0x2 17 #define ALT3 0x3 18 #define ALT4 0x4 19 #define ALT5 0x5 20 #define ALT6 0x6 21 #define ALT7 0x7 24 #define VF610_PAD_PTA6__GPIO_0 0x000 0x000 ALT0 0x0 25 #define VF610_PAD_PTA6__RMII_CLKOUT 0x000 0x000 ALT1 0x0 [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/broadcom/stingray/ |
H A D | stingray-pinctrl.dtsi | 37 reg = <0x00140000 0x250>; 45 reg = <0x0014029c 0x26c>; 47 #size-cells = <0>; 49 pinctrl-single,function-mask = <0xf>; 51 &range 0 91 MODE_GPIO 61 0x038 MODE_NITRO /* tsio_0 */ 62 0x03c MODE_NITRO /* tsio_1 */ 68 0x0ac MODE_PNOR /* nand_ce1_n */ 69 0x0b0 MODE_PNOR /* nand_ce0_n */ 70 0x0b4 MODE_PNOR /* nand_we_n */ [all …]
|
/freebsd/sys/contrib/device-tree/src/powerpc/ |
H A D | iss4xx.dts | 22 dcr-parent = <&{/cpus/cpu@0}>; 30 #size-cells = <0>; 32 cpu@0 { 35 reg = <0x00000000>; 49 reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage 55 cell-index = <0>; 56 dcr-reg = <0x0c0 0x009>; 57 #address-cells = <0>; 58 #size-cells = <0>; 67 dcr-reg = <0x0d0 0x009>; [all …]
|
H A D | klondike.dts | 16 dcr-parent = <&{/cpus/cpu@0}>; 25 #size-cells = <0>; 27 cpu@0 { 30 reg = <0x00000000>; 44 reg = <0x00000000 0x20000000>; /* Filled in by U-Boot */ 50 cell-index = <0>; 51 dcr-reg = <0x0c0 0x010>; 52 #address-cells = <0>; 53 #size-cells = <0>; 61 dcr-reg = <0x0d0 0x010>; [all …]
|
/freebsd/sys/contrib/dev/mediatek/mt76/ |
H A D | mt76x02_eeprom.h | 13 MT_EE_CHIP_ID = 0x000, 14 MT_EE_VERSION = 0x002, 15 MT_EE_MAC_ADDR = 0x004, 16 MT_EE_PCI_ID = 0x00A, 17 MT_EE_ANTENNA = 0x022, 18 MT_EE_CFG1_INIT = 0x024, 19 MT_EE_NIC_CONF_0 = 0x034, 20 MT_EE_NIC_CONF_1 = 0x036, 21 MT_EE_COUNTRY_REGION_5GHZ = 0x038, 22 MT_EE_COUNTRY_REGION_2GHZ = 0x039, [all …]
|
/freebsd/sys/powerpc/mpc85xx/ |
H A D | lbc.h | 36 #define LBC85XX_BR(n) (0x0 + (8 * n)) /* Base register 0-7 */ 37 #define LBC85XX_OR(n) (0x4 + (8 * n)) /* Options register 0-7 */ 38 #define LBC85XX_MAR 0x068 /* UPM address register */ 39 #define LBC85XX_MAMR 0x070 /* UPMA mode register */ 40 #define LBC85XX_MBMR 0x074 /* UPMB mode register */ 41 #define LBC85XX_MCMR 0x078 /* UPMC mode register */ 42 #define LBC85XX_MRTPR 0x084 /* Memory refresh timer prescaler */ 43 #define LBC85XX_MDR 0x088 /* UPM data register */ 44 #define LBC85XX_LSOR 0x090 /* Special operation initiation */ 45 #define LBC85XX_LURT 0x0a0 /* UPM refresh timer */ [all …]
|
/freebsd/sys/contrib/device-tree/src/arm64/ti/ |
H A D | k3-j721s2-common-proc-board.dts | 86 pinctrl-0 = <&vdd_sd_dv_pins_default>; 92 states = <1800000 0x0>, 93 <3300000 0x1>; 98 #phy-cells = <0>; 101 pinctrl-0 = <&mcu_mcan0_gpio_pins_default>; 103 enable-gpios = <&wkup_gpio0 0 GPIO_ACTIVE_HIGH>; 108 #phy-cells = <0>; 111 pinctrl-0 = <&mcu_mcan1_gpio_pins_default>; 117 #phy-cells = <0>; 126 #phy-cells = <0>; [all...] |
/freebsd/sys/arm/freescale/imx/ |
H A D | imx6_anatopreg.h | 32 #define IMX6_ANALOG_CCM_PLL_ARM 0x000 33 #define IMX6_ANALOG_CCM_PLL_ARM_SET 0x004 34 #define IMX6_ANALOG_CCM_PLL_ARM_CLR 0x008 35 #define IMX6_ANALOG_CCM_PLL_ARM_TOG 0x00C 36 #define IMX6_ANALOG_CCM_PLL_ARM_DIV_MASK 0x7F 39 #define IMX6_ANALOG_CCM_PLL_ARM_CLK_SRC_MASK (0x03 << 16) 40 #define IMX6_ANALOG_CCM_PLL_USB1 0x010 41 #define IMX6_ANALOG_CCM_PLL_USB1_SET 0x014 42 #define IMX6_ANALOG_CCM_PLL_USB1_CLR 0x018 43 #define IMX6_ANALOG_CCM_PLL_USB1_TOG 0x01C [all …]
|
/freebsd/sys/contrib/device-tree/Bindings/pinctrl/ |
H A D | nvidia,tegra30-pinmux.yaml | 147 reg = <0x70000868 0x0d0>, /* Pad control registers */ 148 <0x70003000 0x3e0>; /* Mux registers */ 155 nvidia,pull = <0>; 156 nvidia,tristate = <0>; 170 nvidia,tristate = <0>;
|
/freebsd/sys/dev/pms/RefTisa/tisa/sassata/common/ |
H A D | wcs.h | 33 0x011, // 00000 = 0 - PHY_RESET_START 34 0x0ca, // 0x001 = 1 - JUMP_IF_PHY_READY 35 0x009, // 0x002 = 2 - 36 0x0ba, // 0x003 = 3 - JUMP_IF_HARD_RESET_PRIMITIVE 37 0x010, // 0x004 = 4 - 38 0x0bb, // 0x005 = 5 - JUMP_IF_IDENTIFY_FRAME_RECEIVED 39 0x01e, // 0x006 = 6 - 40 0x0ff, // 0x007 = 7 - JUMP 41 0x001, // 0x008 = 8 - 42 0x010, // 0x009 = 9 - SEND_ID_FRAME [all …]
|
/freebsd/sys/dev/bhnd/nvram/ |
H A D | nvram_map | 36 help "Antennas 0-3 are marked as available if the 41 help "Antennas 0-3 are marked as available if the 46 desc "Antenna 0 Gain" 72 help "TX chains 0-3 are marked as available if the 80 help "RX chains 0-3 are marked as available if the 1863 0x048: u8 il0macaddr[6] { +0x1, +0x0, +0x3, +0x2, +0x5, +0x4 } 1864 0x04C: u16 boardnum 1865 0x054: u8 et1macaddr[6] { +0x1, +0x0, +0x3, +0x2, +0x5, +0x4 } 1866 0x05C: u8 boardrev 1867 0x05D: u8 aa5g (&0xC0, >>6) [all …]
|
/freebsd/sys/contrib/device-tree/src/arm/ti/omap/ |
H A D | omap4-duovero.dtsi | 19 reg = <0x80000000 0x40000000>; /* 1 GB */ 44 #phy-cells = <0>; 47 pinctrl-0 = <&hsusb1phy_pins>; 57 pinctrl-0 = <&w2cbw0015_pins>; 71 pinctrl-0 = < 78 OMAP4_IOPAD(0x166, PIN_OUTPUT | MUX_MODE3) /* usbb2_ulpitll_nxt.gpio_160 */ 79 OMAP4_IOPAD(0x1a0, PIN_INPUT | MUX_MODE0) /* sys_nirq2.sys_nirq2 */ 85 OMAP4_IOPAD(0x0fe, PIN_INPUT | MUX_MODE0) /* abe_mcbsp1_clkx.abe_mcbsp1_clkx */ 86 OMAP4_IOPAD(0x100, PIN_INPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dr.abe_mcbsp1_dr */ 87 OMAP4_IOPAD(0x102, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* abe_mcbsp1_dx.abe_mcbsp1_dx */ [all …]
|