Merge branch 'linus' into sched/urgent, to resolve conflict

Conflicts:
kernel/sched/ext.c

There's a context conflict between this upstream commit:

3fdb9ebcec10 sched_ext: Start schedulers with

Merge branch 'linus' into sched/urgent, to resolve conflict

Conflicts:
kernel/sched/ext.c

There's a context conflict between this upstream commit:

3fdb9ebcec10 sched_ext: Start schedulers with consistent p->scx.slice values

... and this fix in sched/urgent:

98442f0ccd82 sched: Fix delayed_dequeue vs switched_from_fair()

Resolve it.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- update fstrim loop and add more cancellation points, fix reported

Merge tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- update fstrim loop and add more cancellation points, fix reported
delayed or blocked suspend if there's a huge chunk queued

- fix error handling in recent qgroup xarray conversion

- in zoned mode, fix warning printing device path without RCU
protection

- again fix invalid extent xarray state (6252690f7e1b), lost due to
refactoring

* tag 'for-6.12-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix clear_dirty and writeback ordering in submit_one_sector()
btrfs: zoned: fix missing RCU locking in error message when loading zone info
btrfs: fix missing error handling when adding delayed ref with qgroups enabled
btrfs: add cancellation points to trim loops
btrfs: split remaining space to discard in chunks

show more ...

btrfs: add cancellation points to trim loops

There are reports that system cannot suspend due to running trim because
the task responsible for trimming the device isn't able to finish in
time, espec

btrfs: add cancellation points to trim loops

There are reports that system cannot suspend due to running trim because
the task responsible for trimming the device isn't able to finish in
time, especially since we have a free extent discarding phase, which can
trim a lot of unallocated space. There are no limits on the trim size
(unlike the block group part).

Since trime isn't a critical call it can be interrupted at any time,
in such cases we stop the trim, report the amount of discarded bytes and
return an error.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge 6.11-rc4 into driver-core-next

We need the driver core build fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into driver-core-next

We need the driver core fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into usb-next

We need the usb / thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into usb-next

We need the usb fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into tty-next

We need the tty/serial fixes in here to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.1

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge patch series "remove size limit on XIP kernel"

Nam Cao <namcao@linutronix.de> says:

Hi,

For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-c

Merge patch series "remove size limit on XIP kernel"

Nam Cao <namcao@linutronix.de> says:

Hi,

For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-coded to 32MB.

Unfortunately, this means the read-only section (placed before the
writable section) is restricted in size. This causes build failure if the
kernel gets too large.

This series remove the use of XIP_OFFSET one by one, then remove this
macro entirely at the end, with the goal of lifting this size restriction.

Also some cleanup and documentation along the way.

* b4-shazam-merge
riscv: remove limit on the size of read-only section for XIP kernel
riscv: drop the use of XIP_OFFSET in create_kernel_page_table()
riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa()
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET
riscv: replace misleading va_kernel_pa_offset on XIP kernel
riscv: don't export va_kernel_pa_offset in vmcoreinfo for XIP kernel
riscv: cleanup XIP_FIXUP macro
riscv: change XIP's kernel_map.size to be size of the entire kernel
...

Link: https://lore.kernel.org/r/cover.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge branch 'bnxt_re_variable_wqes' into rdma.git for-next

Selvin Xavier says:

=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better ut

Merge branch 'bnxt_re_variable_wqes' into rdma.git for-next

Selvin Xavier says:

=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better utilization of the queue memory
and pci bandwidth due to the smaller send queue Work entries.
=============

Based on v6.11-rc5 for dependencies.

* bnxt_re_variable_wqes: (829 commits)
RDMA/bnxt_re: Enable variable size WQEs for user space applications
RDMA/bnxt_re: Handle variable WQE support for user applications
RDMA/bnxt_re: Fix the table size for PSN/MSN entries
RDMA/bnxt_re: Get the WQE index from slot index while completing the WQEs
RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters
Linux 6.11-rc5
...

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge branch 'nesting_reserved_regions' into iommufd.git for-next

Nicolin Chen says:

=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a dev

Merge branch 'nesting_reserved_regions' into iommufd.git for-next

Nicolin Chen says:

=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a device for address translation to an MSI location
(including nested cases), practically it is a universal region across all
domains allocated for the IOMMU that defines it.

Currently IOMMUFD core fetches and reserves the region during an attach to
an hwpt_paging. It works with a hwpt_paging-only case, but might not work
with a nested case where a device could directly attach to a hwpt_nested,
bypassing the hwpt_paging attachment.

Move the enforcement forward, to the hwpt_paging allocation function. Then
clean up all the SW_MSI related things in the attach/replace routine.
=========

Based on v6.11-rc5 for dependencies.

* nesting_reserved_regions: (562 commits)
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
Linux 6.11-rc5
...

show more ...

Introducing Multi-Path DMA Support for mlx5 RDMA Driver

From Yishai,

Overview
--------
This patch series aims to enable multi-path DMA support, allowing an
mlx5 RDMA device to issue DMA commands th

Introducing Multi-Path DMA Support for mlx5 RDMA Driver

From Yishai,

Overview
--------
This patch series aims to enable multi-path DMA support, allowing an
mlx5 RDMA device to issue DMA commands through multiple paths. This
feature is critical for improving performance and reaching line rate
in certain environments where issuing PCI transactions over one path
may be significantly faster than over another. These differences can
arise from various PCI generations in the system or the specific system
topology.

To achieve this functionality, we introduced a data direct DMA device
that can serve the RDMA device by issuing DMA transactions on its
behalf.

The main key features and changes are described below.

Multi-Path Discovery
--------------------
API Implementation:
* Introduced an API to discover multiple paths for a given mlx5 RDMA
device.
IOCTL Command:
* Added a new IOCTL command, MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH, to
the DEVICE object. When an affiliated Data-Direct/DMA device is present,
its sysfs path is returned.

Feature Activation by mlx5 RDMA Application
-------------------------------------------
UVERBS Extension:
* Extended UVERBS_METHOD_REG_DMABUF_MR over UVERBS_OBJECT_MR to include
mlx5 extended flags.
Access Flag:
* Introduced the MLX5_IB_UAPI_REG_DMABUF_ACCESS_DATA_DIRECT flag, allowing
applications to request the use of the affiliated DMA device for DMABUF
registration.

Data-Direct/DMA Device
----------------------
New Driver:
* Introduced a new driver to manage the new DMA PF device ID (0x2100).
Its registration/un-registration is handled as part of the mlx5_ib init/exit
flows, with mlx5 IB devices as its clients.
Functionality:
* The driver does not interface directly with the firmware (no command interface,
no caps, etc.) but works over PCI to activate its DMA functionality. It serves
as the DMA device for efficiently accessing other PCI devices (e.g., GPU PF) and
reads its VUID over PCI to handle NICs registrations with the same VUID.

mlx5 IB RDMA Device
---------------------------
VUID Query:
* Reads its affiliated DMA PF VUID via the QUERY_VUID command with the data_direct
bit set.
Driver Registration:
* Registers with the DMA PF driver to be notified upon bind/unbind.
Application Request Handling:
* Uses the DMA PF device upon application request as described above.

DMABUF over Umem
----------------
Introduced an option to obtain a DMABUF UMEM using a different DMA
device instead of the IB device, allowing the device to register over
IOMMU with the expected DMA device for a given buffer registration.

Further details are provided in the commit logs of the patches in this series.

Thanks

Link: https://lore.kernel.org/all/cover.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in t

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.

The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.

Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.

Follows the list of the rest of the changes grouped by type of
change.

Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.

The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.

The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.

Constified a few global data structures in the virtio driver.

The Renesas driver simplifies the bus speed handling in the init
function making it more readable.

Improved an if/else statement in probe function of the Renesas
R-Car driver.

The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().

Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.

Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.

Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.

Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.

The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.

In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.

New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.

New support
-----------
Added support for:

- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.

The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.

Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.

Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.

The i2c-sprd binding has been converted to YAML.

show more ...

Merge tag 'v6.11-rc2' into media_stage

Linux 6.11-rc2

* tag 'v6.11-rc2': (283 commits)
Linux 6.11-rc2
profiling: remove profile=sleep support
arm: dts: arm: versatile-ab: Fix duplicate clock

Merge tag 'v6.11-rc2' into media_stage

Linux 6.11-rc2

* tag 'v6.11-rc2': (283 commits)
Linux 6.11-rc2
profiling: remove profile=sleep support
arm: dts: arm: versatile-ab: Fix duplicate clock node name
runtime constants: deal with old decrepit linkers
clocksource: Fix brown-bag boolean thinko in cs_watchdog_read()
cifs: update internal version number
smb: client: fix FSCTL_GET_REPARSE_POINT against NetApp
smb3: add dynamic tracepoints for shutdown ioctl
cifs: Remove cifs_aio_ctx
smb: client: handle lack of FSCTL_GET_REPARSE_POINT support
arm64: jump_label: Ensure patched jump_labels are visible to all CPUs
syscalls: fix syscall macros for newfstat/newfstatat
uretprobe: change syscall number, again
thermal: core: Update thermal zone registration documentation
Revert "nouveau: rip out busy fence waits"
protect the fetch of ->fd[fd] in do_dup2() from mispredictions
x86/uaccess: Zero the 8-byte get_range case on failure on 32-bit
riscv: Fix linear mapping checks for non-contiguous memory regions
KVM: x86/mmu: fix determination of max NPT mapping level for private pages
PCI: pciehp: Retain Power Indicator bits for userspace indicators
...

show more ...

Merge tag 'v6.11-rc1' into clk-meson-next

Linux 6.11-rc1

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes from perf-tools/perf-tools, some of which were also in
perf-tools-next but were then indentified as being more ap

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes from perf-tools/perf-tools, some of which were also in
perf-tools-next but were then indentified as being more appropriate to
go sooner, to fix regressions in v6.11.

Resolve a simple merge conflict in tools/perf/tests/pmu.c where a more
future proof approach to initialize all fields of a struct was used in
perf-tools-next, the one that is going into v6.11 is enough for the
segfault it addressed (using an uninitialized test_pmu.alias field).

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be a

Merge tag 'v6.11-rc3' into trace/ring-buffer/core

The "reserve_mem" kernel command line parameter has been pulled into
v6.11. Merge the latest -rc3 to allow the persistent ring buffer memory to
be able to be mapped at the address specified by the "reserve_mem" command
line parameter.

Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

show more ...