Merge tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A few more stability fixes. There's one patch adding export of MIPS

Merge tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:
"A few more stability fixes. There's one patch adding export of MIPS
cmpxchg helper, used in the error propagation fix.

- fix error propagation from split bios to the original btrfs bio

- fix merging of adjacent extents (normal operation, defragmentation)

- fix potential use after free after freeing btrfs device structures"

* tag 'for-6.12-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix defrag not merging contiguous extents due to merged extent maps
btrfs: fix extent map merging not happening for adjacent extents
btrfs: fix use-after-free of block device file in __btrfs_free_extra_devids()
btrfs: fix error propagation of split bios
MIPS: export __cmpxchg_small()

show more ...

btrfs: fix extent map merging not happening for adjacent extents

If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contig

btrfs: fix extent map merging not happening for adjacent extents

If we have 3 or more adjacent extents in a file, that is, consecutive file
extent items pointing to adjacent extents, within a contiguous file range
and compatible flags, we end up not merging all the extents into a single
extent map.

For example:

$ mkfs.btrfs -f /dev/sdc
$ mount /dev/sdc /mnt/sdc

$ xfs_io -f -d -c "pwrite -b 64K 0 64K" \
-c "pwrite -b 64K 64K 64K" \
-c "pwrite -b 64K 128K 64K" \
-c "pwrite -b 64K 192K 64K" \
/mnt/sdc/foo

After all the ordered extents complete we unpin the extent maps and try
to merge them, but instead of getting a single extent map we get two
because:

1) When the first ordered extent completes (file range [0, 64K)) we
unpin its extent map and attempt to merge it with the extent map for
the range [64K, 128K), but we can't because that extent map is still
pinned;

2) When the second ordered extent completes (file range [64K, 128K)), we
unpin its extent map and merge it with the previous extent map, for
file range [0, 64K), but we can't merge with the next extent map, for
the file range [128K, 192K), because this one is still pinned.

The merged extent map for the file range [0, 128K) gets the flag
EXTENT_MAP_MERGED set;

3) When the third ordered extent completes (file range [128K, 192K)), we
unpin its extent map and attempt to merge it with the previous extent
map, for file range [0, 128K), but we can't because that extent map
has the flag EXTENT_MAP_MERGED set (mergeable_maps() returns false
due to different flags) while the extent map for the range [128K, 192K)
doesn't have that flag set.

We also can't merge it with the next extent map, for file range
[192K, 256K), because that one is still pinned.

At this moment we have 3 extent maps:

One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 192K).
One for file range [192K, 256K) which is still pinned;

4) When the fourth and final extent completes (file range [192K, 256K)),
we unpin its extent map and attempt to merge it with the previous
extent map, for file range [128K, 192K), which succeeds since none
of these extent maps have the EXTENT_MAP_MERGED flag set.

So we end up with 2 extent maps:

One for file range [0, 128K), with the flag EXTENT_MAP_MERGED set.
One for file range [128K, 256K), with the flag EXTENT_MAP_MERGED set.

Since after merging extent maps we don't attempt to merge again, that
is, merge the resulting extent map with the one that is now preceding
it (and the one following it), we end up with those two extent maps,
when we could have had a single extent map to represent the whole file.

Fix this by making mergeable_maps() ignore the EXTENT_MAP_MERGED flag.
While this doesn't present any functional issue, it prevents the merging
of extent maps which allows to save memory, and can make defrag not
merging extents too (that will be addressed in the next patch).

Fixes: 199257a78bb0 ("btrfs: defrag: don't use merged extent map for their generation check")
CC: stable@vger.kernel.org # 6.1+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

Merge tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- mount option fixes:
- fix handling of compression mount options

Merge tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux

Pull btrfs fixes from David Sterba:

- mount option fixes:
- fix handling of compression mount options on remount
- reject rw remount in case there are options that don't work
in read-write mode (like rescue options)

- fix zone accounting of unusable space

- fix in-memory corruption when merging extent maps

- fix delalloc range locking for sector < page

- use more convenient default value of drop subtree threshold, clean
more subvolumes without the fallback to marking quotas inconsistent

- fix smatch warning about incorrect value passed to ERR_PTR

* tag 'for-6.12-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix passing 0 to ERR_PTR in btrfs_search_dir_index_item()
btrfs: reject ro->rw reconfiguration if there are hard ro requirements
btrfs: fix read corruption due to race with extent map merging
btrfs: fix the delalloc range locking if sector size < page size
btrfs: qgroup: set a more sane default value for subtree drop threshold
btrfs: clear force-compress on remount when compress mount option is given
btrfs: zoned: fix zone unusable accounting for freed reserved extent

show more ...

btrfs: fix read corruption due to race with extent map merging

In debugging some corrupt squashfs files, we observed symptoms of
corrupt page cache pages but correct on-disk contents. Further
invest

btrfs: fix read corruption due to race with extent map merging

In debugging some corrupt squashfs files, we observed symptoms of
corrupt page cache pages but correct on-disk contents. Further
investigation revealed that the exact symptom was a correct page
followed by an incorrect, duplicate, page. This got us thinking about
extent maps.

commit ac05ca913e9f ("Btrfs: fix race between using extent maps and merging them")
enforces a reference count on the primary `em` extent_map being merged,
as that one gets modified.

However, since,
commit 3d2ac9922465 ("btrfs: introduce new members for extent_map")
both 'em' and 'merge' get modified, which started modifying 'merge'
and thus introduced the same race.

We were able to reproduce this by looping the affected squashfs workload
in parallel on a bunch of separate btrfs-es while also dropping caches.
We are still working on a simple enough reproducer to make into an fstest.

The simplest fix is to stop modifying 'merge', which is not essential,
as it is dropped immediately after the merge. This behavior is simply
a consequence of the order of the two extent maps being important in
computing the new values. Modify merge_ondisk_extents to take prev and
next by const* and also take a third merged parameter that it puts the
results in. Note that this introduces the rather odd behavior of passing
'em' to merge_ondisk_extents as a const * and as a regular ptr.

Fixes: 3d2ac9922465 ("btrfs: introduce new members for extent_map")
CC: stable@vger.kernel.org # 6.11+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Signed-off-by: David Sterba <dsterba@suse.com>

show more ...

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not chang

Merge tag 'kvmarm-fixes-6.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 6.12, take #1

- Fix pKVM error path on init, making sure we do not change critical
system registers as we're about to fail

- Make sure that the host's vector length is at capped by a value
common to all CPUs

- Fix kvm_has_feat*() handling of "negative" features, as the current
code is pretty broken

- Promote Joey to the status of official reviewer, while James steps
down -- hopefully only temporarly

show more ...

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and t

Merge tag 'asoc-fix-v6.12-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.12

A bunch of fixes here that came in during the merge window and the first
week of release, plus some new quirks and device IDs. There's nothing
major here, it's a bit bigger than it might've been due to there being
no fixes sent during the merge window due to your vacation.

show more ...

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten L

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

Required for a panthor fix that broke when
FOP_UNSIGNED_OFFSET was added in place of FMODE_UNSIGNED_OFFSET.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts and no adjacent changes.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge 6.11-rc4 into driver-core-next

We need the driver core build fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into driver-core-next

We need the driver core fixes in here as well to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into tty-next

We need the tty/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into usb-next

We need the usb / thunderbolt fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc4 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into usb-next

We need the usb fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into tty-next

We need the tty/serial fixes in here to build on top of.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 6.11-rc3 into char-misc-next

We need the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.1

Merge tag 'v6.11' into for-6.12/block

Merge in 6.11 final to get the fix for preventing deadlocks on an
elevator switch, as there's a fixup for that patch.

* tag 'v6.11': (1788 commits)
Linux 6.11
Revert "KVM: VMX: Always honor guest PAT on CPUs that support self-snoop"
pinctrl: pinctrl-cy8c95x0: Fix regcache
cifs: Fix signature miscalculation
mm: avoid leaving partial pfn mappings around in error case
drm/xe/client: add missing bo locking in show_meminfo()
drm/xe/client: fix deadlock in show_meminfo()
drm/xe/oa: Enable Xe2+ PES disaggregation
drm/xe/display: fix compat IS_DISPLAY_STEP() range end
drm/xe: Fix access_ok check in user_fence_create
drm/xe: Fix possible UAF in guc_exec_queue_process_msg
drm/xe: Remove fence check from send_tlb_invalidation
drm/xe/gt: Remove double include
net: netfilter: move nf flowtable bpf initialization in nf_flow_table_module_init()
PCI: Fix potential deadlock in pcim_intx()
workqueue: Clear worker->pool in the worker thread context
net: tighten bad gso csum offset check in virtio_net_hdr
netlink: specs: mptcp: fix port endianness
net: dpaa: Pad packets to ETH_ZLEN
mptcp: pm: Fix uaf in __timer_delete_sync
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge patch series "remove size limit on XIP kernel"

Nam Cao <namcao@linutronix.de> says:

Hi,

For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-c

Merge patch series "remove size limit on XIP kernel"

Nam Cao <namcao@linutronix.de> says:

Hi,

For XIP kernel, the writable data section is always at offset specified in
XIP_OFFSET, which is hard-coded to 32MB.

Unfortunately, this means the read-only section (placed before the
writable section) is restricted in size. This causes build failure if the
kernel gets too large.

This series remove the use of XIP_OFFSET one by one, then remove this
macro entirely at the end, with the goal of lifting this size restriction.

Also some cleanup and documentation along the way.

* b4-shazam-merge
riscv: remove limit on the size of read-only section for XIP kernel
riscv: drop the use of XIP_OFFSET in create_kernel_page_table()
riscv: drop the use of XIP_OFFSET in kernel_mapping_va_to_pa()
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_FLASH_OFFSET
riscv: drop the use of XIP_OFFSET in XIP_FIXUP_OFFSET
riscv: replace misleading va_kernel_pa_offset on XIP kernel
riscv: don't export va_kernel_pa_offset in vmcoreinfo for XIP kernel
riscv: cleanup XIP_FIXUP macro
riscv: change XIP's kernel_map.size to be size of the entire kernel
...

Link: https://lore.kernel.org/r/cover.1717789719.git.namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>

show more ...

Merge branch 'ib/6.11-rc6-matrix-keypad-spitz' into next

Bring in changes removing support for platform data from matrix-keypad
driver.

Merge branch 'bnxt_re_variable_wqes' into rdma.git for-next

Selvin Xavier says:

=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better ut

Merge branch 'bnxt_re_variable_wqes' into rdma.git for-next

Selvin Xavier says:

=============
Enable the Variable size Work Queue entry support for Gen P7
adapters. This would help in the better utilization of the queue memory
and pci bandwidth due to the smaller send queue Work entries.
=============

Based on v6.11-rc5 for dependencies.

* bnxt_re_variable_wqes: (829 commits)
RDMA/bnxt_re: Enable variable size WQEs for user space applications
RDMA/bnxt_re: Handle variable WQE support for user applications
RDMA/bnxt_re: Fix the table size for PSN/MSN entries
RDMA/bnxt_re: Get the WQE index from slot index while completing the WQEs
RDMA/bnxt_re: Add support for Variable WQE in Genp7 adapters
Linux 6.11-rc5
...

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge branch 'nesting_reserved_regions' into iommufd.git for-next

Nicolin Chen says:

=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a dev

Merge branch 'nesting_reserved_regions' into iommufd.git for-next

Nicolin Chen says:

=========
IOMMU_RESV_SW_MSI is a unique region defined by an IOMMU driver. Though it
is eventually used by a device for address translation to an MSI location
(including nested cases), practically it is a universal region across all
domains allocated for the IOMMU that defines it.

Currently IOMMUFD core fetches and reserves the region during an attach to
an hwpt_paging. It works with a hwpt_paging-only case, but might not work
with a nested case where a device could directly attach to a hwpt_nested,
bypassing the hwpt_paging attachment.

Move the enforcement forward, to the hwpt_paging allocation function. Then
clean up all the SW_MSI related things in the attach/replace routine.
=========

Based on v6.11-rc5 for dependencies.

* nesting_reserved_regions: (562 commits)
iommufd/device: Enforce reserved IOVA also when attached to hwpt_nested
Linux 6.11-rc5
...

show more ...

Introducing Multi-Path DMA Support for mlx5 RDMA Driver

From Yishai,

Overview
--------
This patch series aims to enable multi-path DMA support, allowing an
mlx5 RDMA device to issue DMA commands th

Introducing Multi-Path DMA Support for mlx5 RDMA Driver

From Yishai,

Overview
--------
This patch series aims to enable multi-path DMA support, allowing an
mlx5 RDMA device to issue DMA commands through multiple paths. This
feature is critical for improving performance and reaching line rate
in certain environments where issuing PCI transactions over one path
may be significantly faster than over another. These differences can
arise from various PCI generations in the system or the specific system
topology.

To achieve this functionality, we introduced a data direct DMA device
that can serve the RDMA device by issuing DMA transactions on its
behalf.

The main key features and changes are described below.

Multi-Path Discovery
--------------------
API Implementation:
* Introduced an API to discover multiple paths for a given mlx5 RDMA
device.
IOCTL Command:
* Added a new IOCTL command, MLX5_IB_METHOD_GET_DATA_DIRECT_SYSFS_PATH, to
the DEVICE object. When an affiliated Data-Direct/DMA device is present,
its sysfs path is returned.

Feature Activation by mlx5 RDMA Application
-------------------------------------------
UVERBS Extension:
* Extended UVERBS_METHOD_REG_DMABUF_MR over UVERBS_OBJECT_MR to include
mlx5 extended flags.
Access Flag:
* Introduced the MLX5_IB_UAPI_REG_DMABUF_ACCESS_DATA_DIRECT flag, allowing
applications to request the use of the affiliated DMA device for DMABUF
registration.

Data-Direct/DMA Device
----------------------
New Driver:
* Introduced a new driver to manage the new DMA PF device ID (0x2100).
Its registration/un-registration is handled as part of the mlx5_ib init/exit
flows, with mlx5 IB devices as its clients.
Functionality:
* The driver does not interface directly with the firmware (no command interface,
no caps, etc.) but works over PCI to activate its DMA functionality. It serves
as the DMA device for efficiently accessing other PCI devices (e.g., GPU PF) and
reads its VUID over PCI to handle NICs registrations with the same VUID.

mlx5 IB RDMA Device
---------------------------
VUID Query:
* Reads its affiliated DMA PF VUID via the QUERY_VUID command with the data_direct
bit set.
Driver Registration:
* Registers with the DMA PF driver to be notified upon bind/unbind.
Application Request Handling:
* Uses the DMA PF device upon application request as described above.

DMABUF over Umem
----------------
Introduced an option to obtain a DMABUF UMEM using a different DMA
device instead of the IB device, allowing the device to register over
IOMMU with the expected DMA device for a given buffer registration.

Further details are provided in the commit logs of the patches in this series.

Thanks

Link: https://lore.kernel.org/all/cover.1722512548.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in t

Merge tag 'i2c-host-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-mergewindow

The DesignWare and the Renesas I2C drivers have received most of
the changes in this pull request.

The first has has undergone through a series of cleanups that
have been sent to the mailing list a year ago for the first time
and finally get merged in this pull request. They are many, from
typos (e.g. i2/i2c), to cosmetics, to refactoring (e.g. move
inline functions to librarieas) and many others.

Besides that, all the DesignWare Kconfig options have been
grouped under the I2C_DESIGNWARE_CORE and this required some
adaptation in many of the kernel configuration files for
different arm and mips boards.

Follows the list of the rest of the changes grouped by type of
change.

Cleanups
--------
The Qualcomm Geni platform improves the exit path in the runtime
resume function.

The Intel LJCA driver loses "target_addr" parameter in
ljca_i2c_stop() because it was unused.

The MediaTek controller intializes the restart_flag in the
transfer function using the ternary conditional operator ("? :")
instead of initializing it in different parts.

Constified a few global data structures in the virtio driver.

The Renesas driver simplifies the bus speed handling in the init
function making it more readable.

Improved an if/else statement in probe function of the Renesas
R-Car driver.

The iMX/MXC driver switches to using the RUNTIME_PM_OPS() instead
of SET_RUNTIME_PM_OPS().

Still in the iMX/MXC driver a comma ',' has been replaced by a
semicolon ';', while in different drivers the ',' has been
removed from the '{ }' delimiters.

Finally three devm_clk_get_enabled() have been used to simplify
the devm_clk_get/clk_prepare_enable tuple in the Renesas EMEV2,
Ingenic and MPC drivers.

Refactors
---------
The Nuvoton fixes a potential out of boundary array access. This
is not a bug fix because the issue could never occur due to
hardware not having the properties listed in the array. The
change makes the driver more future proof and, at the same time,
silences code analyzers.

Improvements
------------
The Renesas I2C (riic) driver undergoes several patches improving
the runtime power management handling.

The Intel i801 driver uses a more descriptive adapter's name to
show the presence of the IDF feature.

In the Intel Denverton (ismt) adapter the pending transactions
are killed when irq's can't complete their handling, triggering a
timeout. This could have been considered as a bug fix, but
because, standing to Vasily, it's very sporadic, I preferred
considering the patch rather as an improvement.

New Feature
-----------
The Renesas I2C (riic) driver now supports the fast mode plus.

New support
-----------
Added support for:

- Renesas R9A08G045
- Rockchip RK3576
- KEBA I2C
- Theobroma Systems Mule Multiplexer.

The Keba comes with a new driver, i2c-keba.c.
The Mule is an i2c multiplexer and it also comes with a new
driver, mux/i2c-mux-mule.c.

Core patch
----------
This pull request includes also a patch in the I2C framework, in
i2c-core-base.c where the runtime PM functions have been replaced
in order to allow to be accessed during the device add.

Devicetree
----------
Some cleanups in the devicetree, as well. nVidia and Qualcomm
bindings improve their "if:then:" blocks. While the aspeed
binding loses the "multi-master" property because it was
redundant.

The i2c-sprd binding has been converted to YAML.

show more ...