Merge tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of th

Merge tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more thermal control updates from Rafael Wysocki:
"This mostly consists of assorted updates of thermal drivers, including
new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal
monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of
recent cosmetic thermal core updates that went against driver core
plans to eliminate class_create():

- Fix missing bitfield include headers in Armada and QCom SPM BMG
drivers (Daniel Lezcano)

- Fix missed file when manually applying a change after a conflict
resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano)

- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)

- Improve bitfield manipulations on Armada (Bryan B. Lima)

- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)

- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval
on Airoha (Christian Marangi)

- Make use of the regmap API to support Airoha AN7583 (Christian
Marangi)

- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)

- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)

- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)

- Add Maili Temperature bindings compatible (Haritha S K)

- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)

- Fix trivial typo in a thermal OF code comment (Marek Vasut)

- Remove unnecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)

- Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and
shared interrupt with the IIO driver (Jishnu Prakash)

- Make resets optional on MT8196 and add the corresponding property
in the DT bindings (AngeloGioacchino Del Regno)

- Fix clock staying enabled on failing resume operation on Qoriq (Can
Peng)

- Fix wrong closing brace position in thermal library header (Andreas
Haufler)

- Fix low and high trip point validation by moving the check after
the clamp on the spacemit driver (surendra)

- Remove redundant error messages on IRQ request failure (Pan Chuang)

- Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal
driver to avoid modpost warnings that would appear after merging
the iio tree against the thermal updates (Nathan Chancellor)

- Revert two recent cosmetic updates of the thermal core conflicting
with driver core plans to eliminate class_create() (Rafael
Wysocki)"

* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER
Revert "thermal/core: Allocate the thermal class dynamically"
Revert "thermal/core: Use the thermal class pointer as init guard"
thermal/drivers/armada: Fix missing bitfields include
thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header
thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
...

show more ...

Merge tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano:

"- Move thermal_zone_device_enable() to

Merge tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Pull thermal driver updates for 7.3-rc1 from Daniel Lezcano:

"- Move thermal_zone_device_enable() to the right place in order to
prevent calling it if the thermal zone registration failed (Dan
Carpenter)

- Improve bitfield manipulations on Armada (Bryan B. Lima)

- Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang)

- Fix wrong boundary when clamping the low values in the set_trips()
callback and fix wrong mask when setting the temperature interval on
Airoha (Christian Marangi)

- Make use of the regmap API in order to support the Airoha AN7583
(Christian Marangi)

- Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC
sensor (Rakesh Kota)

- Fix unbalanced clock enablement when the resume fails on the iMX
driver (Can Peng)

- Add Qualcomm Master BandGap thermal monitor support (Satya Priya
Kakitapalli)

- Add Maili Temperature bindings compatible (Haritha S K)

- Add a devm action to clean hardware interrupts, sampling, and
control registers on Spacemit K1 (Pei Xiao)

- Fix trivial typo in an OF code comment (Marek Vasut)

- Remove unecessary print on Qcom SPMI ADC driver when a call to
devm_request_threaded_irq() fails as this one already prints a
message (Jishnu Prakash)

- Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and
shared interrupt with the IIO driver (Jishnu Prakash)

- Make resets optional on MT8196 and add the corresponding property in
the DT bindings (AngeloGioacchino Del Regno)

- Fix clock staying enabled with the resume operation fails on Qoriq
(Can Peng)

- Fix wrong closing brace position in thermal library header (Andreas
Haufler)

- Fix low and high trip point validation by moving the check after the
clamp on the spacemit driver (surendra)

- Remove redundant error messages on IRQ request failure (Pan Chuang)

* tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits)
thermal/drivers: Remove redundant error messages on IRQ request failure
thermal/drivers/spacemit: Validate clamped trip thresholds
tools/lib/thermal: Fix misplaced extern "C" closing brace
thermal/drivers/qoriq: Disable clock on resume failure
thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196
dt-bindings: thermal: mediatek: Make resets optional for MT8196
thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring
iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver
iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print
thermal/of: Fix trivial enabled typo
thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order
dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor
thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring
dt-bindings: thermal: Add Qualcomm MBG thermal monitor support
thermal/drivers/imx: Disable clock on runtime resume failure
thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp
thermal/drivers/airoha: Add support for AN7583 Thermal Sensor
dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC
thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function
thermal/drivers/airoha: Generalize probe function
...

show more ...

thermal/drivers: Remove redundant error messages on IRQ request failure

Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() and devm_request_t

thermal/drivers: Remove redundant error messages on IRQ request failure

Since commit 55b48e23f5c4 ("genirq/devres: Add error handling in
devm_request_*_irq()"), devm_request_irq() and devm_request_threaded_irq()
automatically log detailed error messages on failure. Remove the
now-redundant driver-specific dev_err() and dev_err_probe() calls.

Signed-off-by: Pan Chuang <panchuang@vivo.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20260717024733.374913-1-panchuang@vivo.com

show more ...