Changes in thermal_fw.c

b81e34131907d2c243c51117a4aff8dbe22ccc9c - Merge tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Wed, 26 Aug 2026 23:21:30 +0200

Merge tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmPull more thermal control updates from Rafael Wysocki: "This mostly consists of assorted updates of thermal drivers, including new hardware support (Airoha AN7583, Qualcomm Master BandGap thermal monitor, QCom PMIC5 Gen3 ADC), but it also includes two reverts of recent cosmetic thermal core updates that went against driver core plans to eliminate class_create(): - Fix missing bitfield include headers in Armada and QCom SPM BMG drivers (Daniel Lezcano) - Fix missed file when manually applying a change after a conflict resolution for the QCom SPMI ADC TM5 Gen3 (Daniel Lezcano) - Move thermal_zone_device_enable() to the right place in order to prevent calling it if the thermal zone registration failed (Dan Carpenter) - Improve bitfield manipulations on Armada (Bryan B. Lima) - Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang) - Fix wrong boundary when clamping the low values in the set_trips() callback and fix wrong mask when setting the temperature interval on Airoha (Christian Marangi) - Make use of the regmap API to support Airoha AN7583 (Christian Marangi) - Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC sensor (Rakesh Kota) - Fix unbalanced clock enablement when the resume fails on the iMX driver (Can Peng) - Add Qualcomm Master BandGap thermal monitor support (Satya Priya Kakitapalli) - Add Maili Temperature bindings compatible (Haritha S K) - Add a devm action to clean hardware interrupts, sampling, and control registers on Spacemit K1 (Pei Xiao) - Fix trivial typo in a thermal OF code comment (Marek Vasut) - Remove unnecessary print on Qcom SPMI ADC driver when a call to devm_request_threaded_irq() fails as this one already prints a message (Jishnu Prakash) - Add support for QCom PMIC5 Gen3 ADC by using auxiliary driver and shared interrupt with the IIO driver (Jishnu Prakash) - Make resets optional on MT8196 and add the corresponding property in the DT bindings (AngeloGioacchino Del Regno) - Fix clock staying enabled on failing resume operation on Qoriq (Can Peng) - Fix wrong closing brace position in thermal library header (Andreas Haufler) - Fix low and high trip point validation by moving the check after the clamp on the spacemit driver (surendra) - Remove redundant error messages on IRQ request failure (Pan Chuang) - Add IIO_CONSUMER namespace import to the qcom-spmi-mbg-tm thermal driver to avoid modpost warnings that would appear after merging the iio tree against the thermal updates (Nathan Chancellor) - Revert two recent cosmetic updates of the thermal core conflicting with driver core plans to eliminate class_create() (Rafael Wysocki)"* tag 'thermal-7.3-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits) thermal/drivers/qcom-spmi-mbg-tm: Add module namespace import for IIO_CONSUMER Revert "thermal/core: Allocate the thermal class dynamically" Revert "thermal/core: Use the thermal class pointer as init guard" thermal/drivers/armada: Fix missing bitfields include thermal/drivers/qcom/spm mbg tm: Fix missing bitfield header thermal/drivers/qcom: Fix missing spmi adc tm5 gen3 file thermal/drivers: Remove redundant error messages on IRQ request failure thermal/drivers/spacemit: Validate clamped trip thresholds tools/lib/thermal: Fix misplaced extern "C" closing brace thermal/drivers/qoriq: Disable clock on resume failure thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196 dt-bindings: thermal: mediatek: Make resets optional for MT8196 thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print thermal/of: Fix trivial enabled typo thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring dt-bindings: thermal: Add Qualcomm MBG thermal monitor support ... List of files: /linux/drivers/thermal/thermal_fw.c

ccda015d76736dc5ccefc70a040b9304a6c2000f - Merge tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux

Mon, 10 Aug 2026 12:53:41 +0200

Merge tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linuxPull thermal driver updates for 7.3-rc1 from Daniel Lezcano:"- Move thermal_zone_device_enable() to the right place in order to prevent calling it if the thermal zone registration failed (Dan Carpenter) - Improve bitfield manipulations on Armada (Bryan B. Lima) - Remove unneeded 'fast_io' on Sun8i and Armada (Wolfram Sang) - Fix wrong boundary when clamping the low values in the set_trips() callback and fix wrong mask when setting the temperature interval on Airoha (Christian Marangi) - Make use of the regmap API in order to support the Airoha AN7583 (Christian Marangi) - Fix adc_tm5_get_temp() return check value on the QCom SPMI ADC sensor (Rakesh Kota) - Fix unbalanced clock enablement when the resume fails on the iMX driver (Can Peng) - Add Qualcomm Master BandGap thermal monitor support (Satya Priya Kakitapalli) - Add Maili Temperature bindings compatible (Haritha S K) - Add a devm action to clean hardware interrupts, sampling, and control registers on Spacemit K1 (Pei Xiao) - Fix trivial typo in an OF code comment (Marek Vasut) - Remove unecessary print on Qcom SPMI ADC driver when a call to devm_request_threaded_irq() fails as this one already prints a message (Jishnu Prakash) - Add support for QCom PMIC5 Gen3 ADC by using auxialiary driver and shared interrupt with the IIO driver (Jishnu Prakash) - Make resets optional on MT8196 and add the corresponding property in the DT bindings (AngeloGioacchino Del Regno) - Fix clock staying enabled with the resume operation fails on Qoriq (Can Peng) - Fix wrong closing brace position in thermal library header (Andreas Haufler) - Fix low and high trip point validation by moving the check after the clamp on the spacemit driver (surendra) - Remove redundant error messages on IRQ request failure (Pan Chuang)* tag 'thermal-v7.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (26 commits) thermal/drivers: Remove redundant error messages on IRQ request failure thermal/drivers/spacemit: Validate clamped trip thresholds tools/lib/thermal: Fix misplaced extern "C" closing brace thermal/drivers/qoriq: Disable clock on resume failure thermal/drivers/mediatek/lvts_thermal: Make reset optional for MT8196 dt-bindings: thermal: mediatek: Make resets optional for MT8196 thermal/drivers/qcom: add support for PMIC5 Gen3 ADC thermal monitoring iio: adc: qcom-spmi-adc5-gen3: Share SDAM0 IRQ with ADC_TM auxiliary driver iio: adc: qcom-spmi-adc5-gen3: Remove an unnecessary print thermal/of: Fix trivial enabled typo thermal/drivers/spacemit/k1: Add shutdown action and reorder registration order dt-bindings: thermal: qcom-tsens: Document the Maili Temperature Sensor thermal/drivers/qcom: Add support for Qualcomm MBG thermal monitoring dt-bindings: thermal: Add Qualcomm MBG thermal monitor support thermal/drivers/imx: Disable clock on runtime resume failure thermal/drivers/qcom-spmi-adc-tm5: Drop IIO_VAL_INT check in adc_tm5_get_temp thermal/drivers/airoha: Add support for AN7583 Thermal Sensor dt-bindings: arm: airoha: Add the chip-scu node for AN7583 SoC thermal/drivers/airoha: Generalize get_thermal_ADC and set_mux function thermal/drivers/airoha: Generalize probe function ... List of files: /linux/drivers/thermal/thermal_fw.c

55c16e15ff9f91bc994a20124b83faf27f0e3690 - thermal/drivers: Remove redundant error messages on IRQ request failure

Fri, 17 Jul 2026 04:47:10 +0200

thermal/drivers: Remove redundant error messages on IRQ request failureSince commit 55b48e23f5c4 ("genirq/devres: Add error handling indevm_request_*_irq()"), devm_request_irq() and devm_request_threaded_irq()automatically log detailed error messages on failure. Remove thenow-redundant driver-specific dev_err() and dev_err_probe() calls.Signed-off-by: Pan Chuang Signed-off-by: Daniel Lezcano Reviewed-by: Frank Li Reviewed-by: Andy Shevchenko Reviewed-by: Geert Uytterhoeven Reviewed-by: Niklas Söderlund Reviewed-by: Miquel Raynal Link: https://patch.msgid.link/20260717024733.374913-1-panchuang@vivo.com List of files: /linux/drivers/thermal/thermal_fw.c