reset: Create subdirectory for SpacemiT drivers

Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.

Move the existing K1 r

reset: Create subdirectory for SpacemiT drivers

Create a dedicated subdirectory for SpacemiT reset drivers to allow
for better organization as support for more SoCs is added.

Move the existing K1 reset driver into this new directory and rename
it to reset-spacemit-k1.c.

Rename the Kconfig symbol to RESET_SPACEMIT_K1 and update its default
from ARCH_SPACEMIT to SPACEMIT_K1_CCU. The reset driver depends on the
clock driver to register reset devices as an auxiliary device, so the
default should reflect this dependency.

Also sort the drivers/reset/Kconfig entries alphabetically.

Reviewed-by: Alex Elder <elder@riscstar.com>
Signed-off-by: Guodong Xu <guodong@riscstar.com>
Reviewed-by: Yixun Lan <dlan@kernel.org>
Link: https://lore.kernel.org/spacemit/20260114092742-GYC7933267@gentoo.org/ [1]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: eswin: Add eic7700 reset driver

Add support for reset controller in eic7700 series chips.
Provide functionality for asserting and deasserting resets
on the chip.

Signed-off-by: Yifeng Huang

reset: eswin: Add eic7700 reset driver

Add support for reset controller in eic7700 series chips.
Provide functionality for asserting and deasserting resets
on the chip.

Signed-off-by: Yifeng Huang <huangyifeng@eswincomputing.com>
Signed-off-by: Xuyang Dong <dongxuyang@eswincomputing.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: aspeed: register AST2700 reset auxiliary bus device

The AST2700 reset driver is registered as an auxiliary device
due to reset and clock controller share the same register region.

Signed-off

reset: aspeed: register AST2700 reset auxiliary bus device

The AST2700 reset driver is registered as an auxiliary device
due to reset and clock controller share the same register region.

Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250708052909.4145983-3-ryan_chen@aspeedtech.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big pa

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
"This is the usual collection of primarily clk driver updates.

The big part of the diff is all the new Qualcomm clk drivers added for
a few SoCs they're working on. The other two vendors with significant
work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks
to existing drivers and supports some new SoCs while Amlogic is
starting a significant refactoring to simplify their code.

The core framework gained a pair of helpers to get the 'struct device'
or 'struct device_node' associated with a 'struct clk_hw'. Some
associated KUnit tests were added for these simple helpers as well.

Beyond that core change there are lots of little fixes throughout the
clk drivers for the stuff we see every day, wrong clk driver data that
affects tree topology or supported frequencies, etc. They're not found
until the clks are actually used by some consumer device driver.

New Drivers:
- Global, display, gpu, video, camera, tcsr, and rpmh clock
controller for the Qualcomm Milos SoC
- Camera, display, GPU, and video clock controllers for Qualcomm
QCS615
- Video clock controller driver for Qualcomm SM6350
- Camera clock controller driver for Qualcomm SC8180X
- I3C clocks and resets on Renesas RZ/G3E
- Expanded Serial Peripheral Interface (xSPI) clocks and resets on
Renesas RZ/V2H(P) and RZ/V2N
- SPI (RSPI) clocks and resets on Renesas RZ/V2H(P)
- SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H
- Ethernet clocks and resets on Renesas RZ/G3E
- Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H
(R9A09G087) SoCs
- Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N
- Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas
RZ/V2N

Updates:
- Support atomic PWMs in the PWM clk driver
- clk_hw_get_dev() and clk_hw_get_of_node() helpers
- Replace round_rate() with determine_rate() in various clk drivers
- Convert clk DT bindings to DT schema format for DT validation
- Various clk driver cleanups and refactorings from static analysis
tools and possibly real humans
- A lot of little fixes here and there to things like clk tree
topology, missing frequencies, flagging clks as critical, etc"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits)
clk: clocking-wizard: Fix the round rate handling for versal
clk: Fix typos
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
clk: tegra: periph: Make tegra_clk_periph_ops static
clk: tegra: periph: Fix error handling and resolve unsigned compare warning
clk: imx: scu: convert from round_rate() to determine_rate()
clk: imx: pllv4: convert from round_rate() to determine_rate()
clk: imx: pllv3: convert from round_rate() to determine_rate()
clk: imx: pllv2: convert from round_rate() to determine_rate()
clk: imx: pll14xx: convert from round_rate() to determine_rate()
clk: imx: pfd: convert from round_rate() to determine_rate()
clk: imx: frac-pll: convert from round_rate() to determine_rate()
clk: imx: fracn-gppll: convert from round_rate() to determine_rate()
clk: imx: fixup-div: convert from round_rate() to determine_rate()
clk: imx: cpu: convert from round_rate() to determine_rate()
clk: imx: busy: convert from round_rate() to determine_rate()
clk: imx: composite-93: remove round_rate() in favor of determine_rate()
clk: imx: composite-8m: remove round_rate() in favor of determine_rate()
clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls
clk: imx: Remove redundant pm_runtime_mark_last_busy() calls
...

show more ...

reset: spacemit: add support for SpacemiT CCU resets

Implement reset support for SpacemiT CCUs. A SpacemiT reset controller
device is an auxiliary device associated with a clock controller (CCU).

reset: spacemit: add support for SpacemiT CCU resets

Implement reset support for SpacemiT CCUs. A SpacemiT reset controller
device is an auxiliary device associated with a clock controller (CCU).

This patch defines the reset controllers for the MPMU, APBC, and MPMU
CCUs, which already define clock controllers. It also adds RCPU, RCPU2,
and ACPB2 CCUs, which only define resets.

Signed-off-by: Alex Elder <elder@riscstar.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20250702113709.291748-6-elder@riscstar.com
Signed-off-by: Yixun Lan <dlan@gentoo.org>

show more ...

reset: canaan: add reset driver for Kendryte K230

Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets

reset: canaan: add reset driver for Kendryte K230

Add support for the resets on Canaan Kendryte K230 SoC. The driver
support CPU0, CPU1, L2 cache flush, hardware auto clear and software
clear resets.

Tested-by: Chen Wang <unicorn_wang@outlook.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Link: https://lore.kernel.org/r/20250613-k230-reset-v4-2-e5266d2be440@pigmoral.tech
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)

Implement a USB2PHY port reset driver for the Renesas RZ/V2H(P) SoC.
Enable control of USB2.0 PHY reset and power-down operations, includin

reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)

Implement a USB2PHY port reset driver for the Renesas RZ/V2H(P) SoC.
Enable control of USB2.0 PHY reset and power-down operations, including
assert and deassert functionalities for the PHY.

Leverage device tree (OF) data to support future SoCs with similar USB2PHY
hardware but varying register configurations. Define initialization values
and control register settings to ensure flexibility for upcoming platforms.

Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Link: https://lore.kernel.org/r/20250415195131.281060-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: thead: Add TH1520 reset controller driver

Add reset controller driver for the T-HEAD TH1520 SoC that manages
hardware reset lines for various subsystems. The driver currently
implements suppo

reset: thead: Add TH1520 reset controller driver

Add reset controller driver for the T-HEAD TH1520 SoC that manages
hardware reset lines for various subsystems. The driver currently
implements support for GPU reset control, with infrastructure in place
to extend support for NPU and Watchdog Timer resets in future updates.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Michal Wilczynski <m.wilczynski@samsung.com>
Link: https://lore.kernel.org/r/20250303152511.494405-3-m.wilczynski@samsung.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM

Add System Controller Firmware(SCU) reset driver for i.MX8QM and i.MX8QXP.
SCU Manage resets for peripherals such as MIPI CSI. Currently, su

reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM

Add System Controller Firmware(SCU) reset driver for i.MX8QM and i.MX8QXP.
SCU Manage resets for peripherals such as MIPI CSI. Currently, support two
reset sources: IMX_SC_R_CSI_0 and IMX_SC_R_CSI_1.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-2-324f5105accc@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: amlogic: move drivers to a dedicated directory

The meson reset driver will be split in two part, one implemeting the ops,
the other providing the platform driver support. This will be done to

reset: amlogic: move drivers to a dedicated directory

The meson reset driver will be split in two part, one implemeting the ops,
the other providing the platform driver support. This will be done to
facilitate the addition of the auxiliary bus support.

To avoid making a mess in drivers/reset/ while doing so, move the amlogic
reset drivers to a dedicated directory.

Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20240910-meson-rst-aux-v5-7-60be62635d3e@baylibre.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: eyeq: add platform driver

Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary d

reset: eyeq: add platform driver

Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H
SoCs. Instances belong to a shared register region called OLB and gets
spawned as auxiliary device to the platform driver for clock.

There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB
instances on EyeQ6H; three have a reset controller embedded:
- West and east get handled by the same compatible.
- Acc (accelerator) is another one.

Each instance vary in the number and types of reset domains.
Instances with single domain expect a single cell, others two.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: tegra-bpmp: allow building under COMPILE_TEST

The Tegra BPMP reset driver can be compiled without TEGRA_BPMP being
enabled. Allow it to be built under COMPILE_TEST.

Acked-by: Thierry Reding

reset: tegra-bpmp: allow building under COMPILE_TEST

The Tegra BPMP reset driver can be compiled without TEGRA_BPMP being
enabled. Allow it to be built under COMPILE_TEST.

Acked-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20240625-reset-compile-bpmp-v1-1-647e846303d8@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: zynqmp: allow building under COMPILE_TEST

The ZynqMP reset driver can be compiled without ARCH_ZYNQMP being
enabled. Allow it to be built under COMPILE_TEST.

Acked-by: Michal Simek <michal.s

reset: zynqmp: allow building under COMPILE_TEST

The ZynqMP reset driver can be compiled without ARCH_ZYNQMP being
enabled. Allow it to be built under COMPILE_TEST.

Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-zynqmp-v1-1-ede43ab18101@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: imx8mp-audiomix: Add AudioMix Block Control reset driver

Add support for the resets on i.MX8MP Audio Block Control module,
which includes the EARC PHY software reset and EARC controller
softw

reset: imx8mp-audiomix: Add AudioMix Block Control reset driver

Add support for the resets on i.MX8MP Audio Block Control module,
which includes the EARC PHY software reset and EARC controller
software reset. The reset controller is created using the auxiliary
device framework and set up in the clock driver.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/1719200345-32006-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: sti: allow building under COMPILE_TEST

The STIH407 reset driver can be compiled without ARCH_STI being
enabled. Allow it to be built under COMPILE_TEST.

Reviewed-by: Patrice Chotard <patrice

reset: sti: allow building under COMPILE_TEST

The STIH407 reset driver can be compiled without ARCH_STI being
enabled. Allow it to be built under COMPILE_TEST.

Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Link: https://lore.kernel.org/r/20240621-reset-compile-sti-v1-1-b7a66ce29911@pengutronix.de
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: gpio: Add GPIO-based reset controller

Add a simple driver to control GPIO-based resets using the reset
controller API for the cases when the GPIOs are shared and reset should
be coordinated.

reset: gpio: Add GPIO-based reset controller

Add a simple driver to control GPIO-based resets using the reset
controller API for the cases when the GPIOs are shared and reset should
be coordinated. The driver is expected to be used by reset core
framework for ad-hoc reset controllers.

Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Cc: Sean Anderson <sean.anderson@seco.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240129115216.96479-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual

Merge tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
"Nothing surprising in the SoC specific drivers, with the usual
updates:

- Added or improved SoC driver support for Tegra234, Exynos4121,
RK3588, as well as multiple Mediatek and Qualcomm chips

- SCMI firmware gains support for multiple SMC/HVC transport and
version 3.2 of the protocol

- Cleanups amd minor changes for the reset controller, memory
controller, firmware and sram drivers

- Minor changes to amd/xilinx, samsung, tegra, nxp, ti, qualcomm,
amlogic and renesas SoC specific drivers"

* tag 'soc-drivers-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (118 commits)
dt-bindings: interrupt-controller: Convert Amlogic Meson GPIO interrupt controller binding
MAINTAINERS: add PHY-related files to Amlogic SoC file list
drivers: meson: secure-pwrc: always enable DMA domain
tee: optee: Use kmemdup() to replace kmalloc + memcpy
soc: qcom: geni-se: Do not bother about enable/disable of interrupts in secondary sequencer
dt-bindings: sram: qcom,imem: document qdu1000
soc: qcom: icc-bwmon: Fix MSM8998 count unit
dt-bindings: soc: qcom,rpmh-rsc: Require power-domains
soc: qcom: socinfo: Add Soc ID for IPQ5300
dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300
soc: qcom: Fix a IS_ERR() vs NULL bug in probe
soc: qcom: socinfo: Add support for new fields in revision 19
soc: qcom: socinfo: Add support for new fields in revision 18
dt-bindings: firmware: scm: Add compatible for SDX75
soc: qcom: mdt_loader: Fix split image detection
dt-bindings: memory-controllers: drop unneeded quotes
soc: rockchip: dtpm: use C99 array init syntax
firmware: tegra: bpmp: Add support for DRAM MRQ GSCs
soc/tegra: pmc: Use devm_clk_notifier_register()
soc/tegra: pmc: Simplify debugfs initialization
...

show more ...

reset: Add Nuvoton ma35d1 reset driver support

This driver supports individual IP reset for the MA35D1. The reset
control registers are a subset of the system control registers.

Signed-off-by: Jack

reset: Add Nuvoton ma35d1 reset driver support

This driver supports individual IP reset for the MA35D1. The reset
control registers are a subset of the system control registers.

Signed-off-by: Jacky Huang <ychuang3@nuvoton.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

reset: oxnas: remove obsolete reset driver

Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 a

reset: oxnas: remove obsolete reset driver

Due to lack of maintainance and stall of development for a few years now,
and since no new features will ever be added upstream, remove support
for OX810 and OX820 peripheral reset.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Acked-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20230331-topic-oxnas-upstream-remove-v1-17-5bd58fd1dd1f@linaro.org
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

show more ...

reset: Create subdirectory for StarFive drivers

This moves the StarFive JH7100 reset driver to a new subdirectory in
preparation for adding more StarFive reset drivers.

Reviewed-by: Philipp Zabel <

reset: Create subdirectory for StarFive drivers

This moves the StarFive JH7100 reset driver to a new subdirectory in
preparation for adding more StarFive reset drivers.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Tested-by: Tommaso Merciai <tomm.merciai@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Signed-off-by: Emil Renner Berthing <kernel@esmil.dk>
Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>

show more ...

reset: add polarfire soc reset support

Add support for the resets on Microchip's PolarFire SoC (MPFS).
Reset control is a single register, wedged in between registers for
clock control. To fit with

reset: add polarfire soc reset support

Add support for the resets on Microchip's PolarFire SoC (MPFS).
Reset control is a single register, wedged in between registers for
clock control. To fit with existed DT etc, the reset controller is
created using the aux device framework & set up in the clock driver.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220909123123.2699583-6-conor.dooley@microchip.com

show more ...

Merge tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM SoC updates from Arnd Bergmann:
"These updates came in after I had already tagged the branches, but

Merge tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM SoC updates from Arnd Bergmann:
"These updates came in after I had already tagged the branches, but
they still seem appropriate for 6.0 and most of them were part of
linux-next through other trees.

- The reset controller tree adds one new driver for the TI TPS380x
power management chip and a few minor changes in other drivers

- Apple M1 now has a DT entry for the NVMe controller after the
driver was merged, and has a new mailing list in the MAINTAINERS
file.

- Fixes for USB on the Socionext Uniphier platforms and the network
controller on Intel Cyclone5"

* tag 'arm-late-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: uniphier: Fix USB interrupts for PXs3 SoC
ARM: dts: uniphier: Fix USB interrupts for PXs2 SoC
arm64: dts: apple: t8103: Add ANS2 NVMe nodes
reset: tps380x: Fix spelling mistake "Voltags" -> "Voltage"
reset: tps380x: Add TPS380x device driver supprt
dt-bindings: reset: Add TPS380x documentation
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G2UL USBPHY Control bindings
ARM: dts: add EMAC AXI settings for Cyclone5
reset: reset-simple should depends on HAS_IOMEM
Revert "reset: microchip-sparx5: allow building as a module"
reset: a10sr: allow building under COMPILE_TEST
reset: allow building of reset simple driver if expert config selected
reset: microchip-sparx5: allow building as a module
arm64: dts: apple: Re-parent ANS2 power domains
MAINTAINERS: add ARM/APPLE MACHINE mailing list

show more ...

reset: tps380x: Add TPS380x device driver supprt

The TI TPS380x family [1] is a voltage supervisor with a dedicated
manual reset (mr) line input and a reset output. The chip(s) have a
build in reset

reset: tps380x: Add TPS380x device driver supprt

The TI TPS380x family [1] is a voltage supervisor with a dedicated
manual reset (mr) line input and a reset output. The chip(s) have a
build in reset delay, depending on the chip partnumber. This simple
driver addresses this so the cosumer don't need to care about it.

[1] https://www.ti.com/product/TPS3801

Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
[p.zabel@pengutronix.de: drop Todo comment about min/typ/max reset time]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220530092226.748644-2-m.felsch@pengutronix.de

show more ...

reset: Add Sunplus SP7021 reset driver

Add reset driver for Sunplus SP7021 SoC.

Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Arnd

reset: Add Sunplus SP7021 reset driver

Add reset driver for Sunplus SP7021 SoC.

Signed-off-by: Qin Jian <qinjian@cqplus1.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

reset: Add Delta TN48M CPLD reset controller

Delta TN48M CPLD exposes resets for the following:
* 88F7040 SoC
* 88F6820 SoC
* 98DX3265 switch MAC-s
* 88E1680 PHY-s
* 88E1512 PHY
* PoE PSE controller

reset: Add Delta TN48M CPLD reset controller

Delta TN48M CPLD exposes resets for the following:
* 88F7040 SoC
* 88F6820 SoC
* 98DX3265 switch MAC-s
* 88E1680 PHY-s
* 88E1512 PHY
* PoE PSE controller

Controller supports only self clearing resets.

Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20220131133049.77780-5-robert.marko@sartura.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...