Merge drm/drm-next into drm-intel-next

Time to get back in sync...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get v5.12 fixes. Requested for vmwgfx.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

Start this new release drm-misc-fixes branch

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel

Merge tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- bpf:
- allow bpf programs calling kernel functions (initially to
reuse TCP congestion control implementations)
- enable task local storage for tracing programs - remove the
need to store per-task state in hash maps, and allow tracing
programs access to task local storage previously added for
BPF_LSM
- add bpf_for_each_map_elem() helper, allowing programs to walk
all map elements in a more robust and easier to verify fashion
- sockmap: support UDP and cross-protocol BPF_SK_SKB_VERDICT
redirection
- lpm: add support for batched ops in LPM trie
- add BTF_KIND_FLOAT support - mostly to allow use of BTF on
s390 which has floats in its headers files
- improve BPF syscall documentation and extend the use of kdoc
parsing scripts we already employ for bpf-helpers
- libbpf, bpftool: support static linking of BPF ELF files
- improve support for encapsulation of L2 packets

- xdp: restructure redirect actions to avoid a runtime lookup,
improving performance by 4-8% in microbenchmarks

- xsk: build skb by page (aka generic zerocopy xmit) - improve
performance of software AF_XDP path by 33% for devices which don't
need headers in the linear skb part (e.g. virtio)

- nexthop: resilient next-hop groups - improve path stability on
next-hops group changes (incl. offload for mlxsw)

- ipv6: segment routing: add support for IPv4 decapsulation

- icmp: add support for RFC 8335 extended PROBE messages

- inet: use bigger hash table for IP ID generation

- tcp: deal better with delayed TX completions - make sure we don't
give up on fast TCP retransmissions only because driver is slow in
reporting that it completed transmitting the original

- tcp: reorder tcp_congestion_ops for better cache locality

- mptcp:
- add sockopt support for common TCP options
- add support for common TCP msg flags
- include multiple address ids in RM_ADDR
- add reset option support for resetting one subflow

- udp: GRO L4 improvements - improve 'forward' / 'frag_list'
co-existence with UDP tunnel GRO, allowing the first to take place
correctly even for encapsulated UDP traffic

- micro-optimize dev_gro_receive() and flow dissection, avoid
retpoline overhead on VLAN and TEB GRO

- use less memory for sysctls, add a new sysctl type, to allow using
u8 instead of "int" and "long" and shrink networking sysctls

- veth: allow GRO without XDP - this allows aggregating UDP packets
before handing them off to routing, bridge, OvS, etc.

- allow specifing ifindex when device is moved to another namespace

- netfilter:
- nft_socket: add support for cgroupsv2
- nftables: add catch-all set element - special element used to
define a default action in case normal lookup missed
- use net_generic infra in many modules to avoid allocating
per-ns memory unnecessarily

- xps: improve the xps handling to avoid potential out-of-bound
accesses and use-after-free when XPS change race with other
re-configuration under traffic

- add a config knob to turn off per-cpu netdev refcnt to catch
underflows in testing

Device APIs:

- add WWAN subsystem to organize the WWAN interfaces better and
hopefully start driving towards more unified and vendor-
independent APIs

- ethtool:
- add interface for reading IEEE MIB stats (incl. mlx5 and bnxt
support)
- allow network drivers to dump arbitrary SFP EEPROM data,
current offset+length API was a poor fit for modern SFP which
define EEPROM in terms of pages (incl. mlx5 support)

- act_police, flow_offload: add support for packet-per-second
policing (incl. offload for nfp)

- psample: add additional metadata attributes like transit delay for
packets sampled from switch HW (and corresponding egress and
policy-based sampling in the mlxsw driver)

- dsa: improve support for sandwiched LAGs with bridge and DSA

- netfilter:
- flowtable: use direct xmit in topologies with IP forwarding,
bridging, vlans etc.
- nftables: counter hardware offload support

- Bluetooth:
- improvements for firmware download w/ Intel devices
- add support for reading AOSP vendor capabilities
- add support for virtio transport driver

- mac80211:
- allow concurrent monitor iface and ethernet rx decap
- set priority and queue mapping for injected frames

- phy: add support for Clause-45 PHY Loopback

- pci/iov: add sysfs MSI-X vector assignment interface to distribute
MSI-X resources to VFs (incl. mlx5 support)

New hardware/drivers:

- dsa: mv88e6xxx: add support for Marvell mv88e6393x - 11-port
Ethernet switch with 8x 1-Gigabit Ethernet and 3x 10-Gigabit
interfaces.

- dsa: support for legacy Broadcom tags used on BCM5325, BCM5365 and
BCM63xx switches

- Microchip KSZ8863 and KSZ8873; 3x 10/100Mbps Ethernet switches

- ath11k: support for QCN9074 a 802.11ax device

- Bluetooth: Broadcom BCM4330 and BMC4334

- phy: Marvell 88X2222 transceiver support

- mdio: add BCM6368 MDIO mux bus controller

- r8152: support RTL8153 and RTL8156 (USB Ethernet) chips

- mana: driver for Microsoft Azure Network Adapter (MANA)

- Actions Semi Owl Ethernet MAC

- can: driver for ETAS ES58X CAN/USB interfaces

Pure driver changes:

- add XDP support to: enetc, igc, stmmac

- add AF_XDP support to: stmmac

- virtio:
- page_to_skb() use build_skb when there's sufficient tailroom
(21% improvement for 1000B UDP frames)
- support XDP even without dedicated Tx queues - share the Tx
queues with the stack when necessary

- mlx5:
- flow rules: add support for mirroring with conntrack, matching
on ICMP, GTP, flex filters and more
- support packet sampling with flow offloads
- persist uplink representor netdev across eswitch mode changes
- allow coexistence of CQE compression and HW time-stamping
- add ethtool extended link error state reporting

- ice, iavf: support flow filters, UDP Segmentation Offload

- dpaa2-switch:
- move the driver out of staging
- add spanning tree (STP) support
- add rx copybreak support
- add tc flower hardware offload on ingress traffic

- ionic:
- implement Rx page reuse
- support HW PTP time-stamping

- octeon: support TC hardware offloads - flower matching on ingress
and egress ratelimitting.

- stmmac:
- add RX frame steering based on VLAN priority in tc flower
- support frame preemption (FPE)
- intel: add cross time-stamping freq difference adjustment

- ocelot:
- support forwarding of MRP frames in HW
- support multiple bridges
- support PTP Sync one-step timestamping

- dsa: mv88e6xxx, dpaa2-switch: offload bridge port flags like
learning, flooding etc.

- ipa: add IPA v4.5, v4.9 and v4.11 support (Qualcomm SDX55, SM8350,
SC7280 SoCs)

- mt7601u: enable TDLS support

- mt76:
- add support for 802.3 rx frames (mt7915/mt7615)
- mt7915 flash pre-calibration support
- mt7921/mt7663 runtime power management fixes"

* tag 'net-next-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2451 commits)
net: selftest: fix build issue if INET is disabled
net: netrom: nr_in: Remove redundant assignment to ns
net: tun: Remove redundant assignment to ret
net: phy: marvell: add downshift support for M88E1240
net: dsa: ksz: Make reg_mib_cnt a u8 as it never exceeds 255
net/sched: act_ct: Remove redundant ct get and check
icmp: standardize naming of RFC 8335 PROBE constants
bpf, selftests: Update array map tests for per-cpu batched ops
bpf: Add batched ops support for percpu array
bpf: Implement formatted output helpers with bstr_printf
seq_file: Add a seq_bprintf function
sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues
net:nfc:digital: Fix a double free in digital_tg_recv_dep_req
net: fix a concurrency bug in l2tp_tunnel_register()
net/smc: Remove redundant assignment to rc
mpls: Remove redundant assignment to err
llc2: Remove redundant assignment to rc
net/tls: Remove redundant initialization of record
rds: Remove redundant assignment to nr_sig
dt-bindings: net: mdio-gpio: add compatible for microchip,mdio-smi0
...

show more ...

Merge tag 'wireless-drivers-next-2021-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.

Merge tag 'wireless-drivers-next-2021-04-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.13

Second set of patches for v5.13. A lot of iwlwifi and mt76 patches
this time, and also smaller features and fixes all over.

mt76

* mt7915/mt7615 decapsulation offload support

* threaded NAPI support

* new device IDs

* mt7921 device reset support

* rx timestamp support

iwlwifi

* passive scan support for 6GHz

* new hardware support

wilc1000

* CRC support for SPI bus
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

wilc1000: Add support for enabling CRC

The driver so far has always disabled CRC protection. This means any
data corruption that occurrs during the SPI transfers could go
undetected. This patch ad

wilc1000: Add support for enabling CRC

The driver so far has always disabled CRC protection. This means any
data corruption that occurrs during the SPI transfers could go
undetected. This patch adds module parameters enable_crc7 and
enable_crc16 to selectively turn on CRC7 (for command transfers) and
CRC16 (for data transfers), respectively.

The default configuration remains unchanged, with both CRC7 and CRC16
off.

The performance impact of CRC was measured by running ttcp -t four
times in a row on a SAMA5 device:

CRC7 CRC16 Throughput: Standard deviation:
---- ----- ----------- -------------------
off off 1720 +/- 48 KB/s
on off 1658 +/- 58 KB/s
on on 1579 +/- 84 KB/s

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-4-davidm@egauge.net

show more ...

wilc1000: Check for errors at end of DMA write

After a DMA write to the WILC chip, check for and report any errors.

This is based on code from the wilc driver in the linux-at91
repository.

Signed-

wilc1000: Check for errors at end of DMA write

After a DMA write to the WILC chip, check for and report any errors.

This is based on code from the wilc driver in the linux-at91
repository.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-3-davidm@egauge.net

show more ...

wilc1000: Introduce symbolic names for SPI protocol register

The WILC1000 protocol control register has bits for enabling the CRCs
(CRC7 for commands and CRC16 for data) and to set the data packet
s

wilc1000: Introduce symbolic names for SPI protocol register

The WILC1000 protocol control register has bits for enabling the CRCs
(CRC7 for commands and CRC16 for data) and to set the data packet
size. Define symbolic names for those so the code is more easily
understood.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-2-davidm@egauge.net

show more ...

wilc1000: Make SPI transfers work at 48MHz

For CMD_SINGLE_READ and CMD_INTERNAL_READ, WILC may insert one or more
zero bytes between the command response and the DATA Start tag (0xf3).
This behavior

wilc1000: Make SPI transfers work at 48MHz

For CMD_SINGLE_READ and CMD_INTERNAL_READ, WILC may insert one or more
zero bytes between the command response and the DATA Start tag (0xf3).
This behavior appears to be undocumented in "ATWILC1000 USER GUIDE"
(https://tinyurl.com/4hhshdts) but we have observed 1-4 zero bytes
when the SPI bus operates at 48MHz and none when it operates at 1MHz.

This code is derived from the equivalent code of the wilc driver in
the linux-at91 repository.

Signed-off-by: David Mosberger-Tang <davidm@egauge.net>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210227172818.1711071-1-davidm@egauge.net

show more ...

Merge remote-tracking branch 'net/master'

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

Merge tag 'amba-make-remove-return-void' of https://git.pengutronix.de/git/ukl/linux into devel-stable

Tag for adaptions to struct amba_driver::remove changing prototype

Merge branch 'cpuidle-fix' into fixes

Merge drm/drm-next into drm-intel-gt-next

Backmerging to get a common base for merging topic branches between
drm-intel-next and drm-intel-gt-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@l

Merge drm/drm-next into drm-intel-gt-next

Backmerging to get a common base for merging topic branches between
drm-intel-next and drm-intel-gt-next.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

sync-up to not fall too much behind.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'for-linus' into for-next

Back-merge of 5.11-devel branch for syncing the result changes.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-v5.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.11

A collection of mostly driver specific fixes, plus a maintainers

Merge tag 'asoc-fix-v5.11-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.11

A collection of mostly driver specific fixes, plus a maintainership
update for TI and a fix for DAPM driver removal paths.

show more ...

Merge drm/drm-next into drm-misc-next

Staying in sync to drm-next, and to be able to pull ttm fixes.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'v5.11-rc1' into spi-5.11

Linux 5.11-rc1

Merge tag 'v5.11-rc1' into regulator-5.11

Linux 5.11-rc1

Merge tag 'v5.11-rc1' into asoc-5.11

Linux 5.11-rc1

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes and check what UAPI headers need to be synched.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- support "prefer busy polling" NAPI operation mod

Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll

- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher

- af_packet: make packet_fanout.arr size configurable up to 64K

- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages

- XDP: add bulk APIs for returning / freeing frames

- sched: support fragmenting IP packets as they come out of conntrack

- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

BPF:

- BPF switch from crude rlimit-based to memcg-based memory accounting

- BPF type format information for kernel modules and related tracing
enhancements

- BPF implement task local storage for BPF LSM

- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage

Protocols:

- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements

- TLS: support CHACHA20-POLY1305 cipher

- seg6: add support for SRv6 End.DT4/DT6 behavior

- sctp: Implement RFC 6951: UDP Encapsulation of SCTP

- ppp_generic: add ability to bridge channels directly

- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.

Drivers:

- mlx5: make use of the new auxiliary bus to organize the driver
internals

- mlx5: more accurate port TX timestamping support

- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging

- rtw88: major bluetooth co-existance improvements

- iwlwifi: support new 6 GHz frequency band

- ath11k: Fast Initial Link Setup (FILS)

- mt7915: dual band concurrent (DBDC) support

- net: ipa: add basic support for IPA v4.5

Refactor:

- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior

- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs

- add common code for handling netdev per-cpu counters

- move TX packet re-allocation from Ethernet switch tag drivers to a
central place

- improve efficiency and rename nla_strlcpy

- number of W=1 warning cleanups as we now catch those in a patchwork
build bot

Old code removal:

- wan: delete the DLCI / SDLA drivers

- wimax: move to staging

- wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.11 merge window.