Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@k

Merge tag 'v6.8-rc4' into x86/percpu, to resolve conflicts and refresh the branch

Conflicts:
arch/x86/include/asm/percpu.h
arch/x86/include/asm/text-patching.h

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers,

Merge remote-tracking branch 'torvalds/master' into perf-tools-next

To pick up fixes that went thru perf-tools for v6.7 and to get in sync
with upstream to check for drift in the copies of headers, etc.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge tag 'spi-nor/for-6.7' into mtd/next

For SPI NOR we cleaned the flash info entries in order to have
them slimmer and self explanatory. In order to make the entries
as slim as possible, we intro

Merge tag 'spi-nor/for-6.7' into mtd/next

For SPI NOR we cleaned the flash info entries in order to have
them slimmer and self explanatory. In order to make the entries
as slim as possible, we introduced sane default values so that
the actual flash entries don't need to specify them. We now use
a flexible macro to specify the flash ID instead of the previous
INFOx() macros that had hardcoded ID lengths.

Instead of:
- { "w25q512nwm", INFO(0xef8020, 0, 64 * 1024, 0)
- OTP_INFO(256, 3, 0x1000, 0x1000) },

We now use:
+ .id = SNOR_ID(0xef, 0x80, 0x20),
+ .name = "w25q512nwm",
+ .otp = SNOR_OTP(256, 3, 0x1000, 0x1000),

We also removed some flash entries: the very old Catalyst
SPI EEPROMs that were introduced once with the SPI-NOR subsystem,
and a Fujitsu MRAM. Both should use the at25 EEPROM driver.
The latter even has device tree bindings for the at25 driver.

We made sure that the conversion didn't introduce any unwanted
changes by comparing the .rodata segment before and after the
conversion. The patches landed in linux-next immediately after
v6.6-rc2, we haven't seen any regressions yet.

Apart of the autumn cleaning we introduced a new flash entry,
at25ff321a, and added block protection support for mt25qu512a.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>

show more ...

Merge branch 'for-6.7/config_pm' into for-linus

- #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)

Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.7

More updates for v6,7 following the early merge request:

- Fixes fo

Merge tag 'asoc-v6.7-2' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.7

More updates for v6,7 following the early merge request:

- Fixes for handling of component name prefixing when name prefixes
are used by the machine driver.
- Fixes for noise when stopping some Sounwire CODECs.
- Support for AMD ACP 6.3 and 7.0, Awinc AW88399, more Intel
platforms and more Qualcomm SC7180 platforms.

show more ...

ASoC: Merge up v6.6-rc7

Get fixes needed so we can enable build of ams-delta in more
configurations.

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'sched/urgent' into sched/core, to pick up fixes and refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc4' into x86/entry, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

IPsec packet offload support in multiport RoCE devices

This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).

These devices h

IPsec packet offload support in multiport RoCE devices

This series from Patrisious extends mlx5 to support IPsec packet offload
in multiport devices (MPV, see [1] for more details).

These devices have single flow steering logic and two netdev interfaces,
which require extra logic to manage IPsec configurations as they performed
on netdevs.

Thanks

[1] https://lore.kernel.org/linux-rdma/20180104152544.28919-1-leon@kernel.org/

Link: https://lore.kernel.org/all/20231002083832.19746-1-leon@kernel.org
Signed-of-by: Leon Romanovsky <leon@kernel.org>

* mlx5-next: (576 commits)
net/mlx5: Handle IPsec steering upon master unbind/bind
net/mlx5: Configure IPsec steering for ingress RoCEv2 MPV traffic
net/mlx5: Configure IPsec steering for egress RoCEv2 MPV traffic
net/mlx5: Add create alias flow table function to ipsec roce
net/mlx5: Implement alias object allow and create functions
net/mlx5: Add alias flow table bits
net/mlx5: Store devcom pointer inside IPsec RoCE
net/mlx5: Register mlx5e priv to devcom in MPV mode
RDMA/mlx5: Send events from IB driver about device affiliation state
net/mlx5: Introduce ifc bits for migration in a chunk mode
Linux 6.6-rc3
...

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to sync up with drm-intel-gt-next and drm-misc-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

regulator: mt6358: Remove bogus regulators and

Merge series from Chen-Yu Tsai <wenst@chromium.org>:

Hi,

This is v3 of the remainder of the MT6358 regulator driver cleanup
and improvement series. v

regulator: mt6358: Remove bogus regulators and

Merge series from Chen-Yu Tsai <wenst@chromium.org>:

Hi,

This is v3 of the remainder of the MT6358 regulator driver cleanup
and improvement series. v1 can be found here [1]; v2 is here [2].

Changes since v2:
- Merged patches dropped
- Fixed up pickable linear ranges' selector values
- Collected tags
- Patch adding missing regulator definitions squashed into patch using
the definitions; recommended by Krzysztof on my MT6366 series.
- Remaining dts patch split out to be sent separately

Changes since v1:
- Merged patches dropped
- Added patch to move VCN33 regulator status sync after ID check
- Added patch to fix VCN33 sync fail error message
- Added patch to add missing register definitions

Various discrepancies were found while preparing to upstream MT8186
device trees, which utilize the MT6366 PMIC, that is also covered by
this driver.

Patches 1~3 should go through the regulator tree, and patch 4 through
the soc/mediatek tree.

** Note: patch 2 needs an ack from Lee for the mfd header change.

This v3 series can be seen as two parts. v1 had three parts, but one
part was fully merged, and then v2 gained another cleanup. v3 drops
the "fixing bogus regulators" part: driver changes are fully merged
and device tree change will be sent separately.

Part 1 - Robust chip ID checking (patch 1)

Angelo suggested making the driver fail to probe if an unexpected chip
ID was found. Patch 1 implements this.

Part 2 - Output voltage fine tuning support (patches 2, 3)

Many of the LDOs on these PMIC support an extra level of output voltage
fine tuning. Most default to no offset, but a couple have a non-zero
offset by default. Previously this was unaccounted for in the driver and
device tree constraints. On the outputs with non-zero offset, this ends
up becoming a discrepancy between the device tree and actual hardware.
These two patches adds support for this second level of tuning, modeled
as bunch of linear ranges. While it's unlikely we need this level of
control, it's nice to be able to read back the accurate hardware
settings.

Please have a look.

Thanks
ChenYu

[1] https://lore.kernel.org/linux-arm-kernel/20230609083009.2822259-1-wenst@chromium.org/
[2] https://lore.kernel.org/linux-mediatek/20230721082903.2038975-1-wenst@chromium.org/

Chen-Yu Tsai (3):
regulator: mt6358: Fail probe on unknown chip ID
regulator: mt6358: Add output voltage fine tuning to fixed regulators
regulator: mt6358: Add output voltage fine tuning to variable LDOs

drivers/regulator/mt6358-regulator.c | 304 ++++++++++++---------------
include/linux/mfd/mt6358/registers.h | 6 +
2 files changed, 144 insertions(+), 166 deletions(-)

--
2.42.0.283.g2d96d420d3-goog

show more ...

Merge tag 'kvm-riscv-fixes-6.6-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 6.6, take #1

- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of

Merge tag 'kvm-riscv-fixes-6.6-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv fixes for 6.6, take #1

- Fix KVM_GET_REG_LIST API for ISA_EXT registers
- Fix reading ISA_EXT register of a missing extension
- Fix ISA_EXT register handling in get-reg-list test
- Fix filtering of AIA registers in get-reg-list test

show more ...

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Cross-merge networking fixes after downstream PR.

No conflicts.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(

Merge tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Paolo Abeni:
"Quite unusually, this does not contains any fix coming from subtrees
(nf, ebpf, wifi, etc).

Current release - regressions:

- bcmasp: fix possible OOB write in bcmasp_netfilt_get_all_active()

Previous releases - regressions:

- ipv4: fix one memleak in __inet_del_ifa()

- tcp: fix bind() regressions for v4-mapped-v6 addresses.

- tls: do not free tls_rec on async operation in
bpf_exec_tx_verdict()

- dsa: fixes for SJA1105 FDB regressions

- veth: update XDP feature set when bringing up device

- igb: fix hangup when enabling SR-IOV

Previous releases - always broken:

- kcm: fix memory leak in error path of kcm_sendmsg()

- smc: fix data corruption in smcr_port_add

- microchip: fix possible memory leak for vcap_dup_rule()"

* tag 'net-6.6-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (37 commits)
kcm: Fix error handling for SOCK_DGRAM in kcm_sendmsg().
net: renesas: rswitch: Add spin lock protection for irq {un}mask
net: renesas: rswitch: Fix unmasking irq condition
igb: clean up in all error paths when enabling SR-IOV
ixgbe: fix timestamp configuration code
selftest: tcp: Add v4-mapped-v6 cases in bind_wildcard.c.
selftest: tcp: Move expected_errno into each test case in bind_wildcard.c.
selftest: tcp: Fix address length in bind_wildcard.c.
tcp: Fix bind() regression for v4-mapped-v6 non-wildcard address.
tcp: Fix bind() regression for v4-mapped-v6 wildcard address.
tcp: Factorise sk_family-independent comparison in inet_bind2_bucket_match(_addr_any).
ipv6: fix ip6_sock_set_addr_preferences() typo
veth: Update XDP feature set when bringing up device
net: macb: fix sleep inside spinlock
net/tls: do not free tls_rec on async operation in bpf_exec_tx_verdict()
net: ethernet: mtk_eth_soc: fix pse_port configuration for MT7988
net: ethernet: mtk_eth_soc: fix uninitialized variable
kcm: Fix memory leak in error path of kcm_sendmsg()
r8152: check budget for r8152_poll()
net: dsa: sja1105: block FDB accesses that are concurrent with a switch reset
...

show more ...

ixgbe: fix timestamp configuration code

The commit in fixes introduced flags to control the status of hardware
configuration while processing packets. At the same time another structure
is used to p

ixgbe: fix timestamp configuration code

The commit in fixes introduced flags to control the status of hardware
configuration while processing packets. At the same time another structure
is used to provide configuration of timestamper to user-space applications.
The way it was coded makes this structures go out of sync easily. The
repro is easy for 82599 chips:

[root@hostname ~]# hwstamp_ctl -i eth0 -r 12 -t 1
current settings:
tx_type 0
rx_filter 0
new settings:
tx_type 1
rx_filter 12

The eth0 device is properly configured to timestamp any PTPv2 events.

[root@hostname ~]# hwstamp_ctl -i eth0 -r 1 -t 1
current settings:
tx_type 1
rx_filter 12
SIOCSHWTSTAMP failed: Numerical result out of range
The requested time stamping mode is not supported by the hardware.

The error is properly returned because HW doesn't support all packets
timestamping. But the adapter->flags is cleared of timestamp flags
even though no HW configuration was done. From that point no RX timestamps
are received by user-space application. But configuration shows good
values:

[root@hostname ~]# hwstamp_ctl -i eth0
current settings:
tx_type 1
rx_filter 12

Fix the issue by applying new flags only when the HW was actually
configured.

Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices")
Signed-off-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.3 merge window.

Merge drm/drm-next into drm-misc-next

Backmerging into drm-misc-next to get DRM accelerator infrastructure,
which is required by ipuv driver.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.2-rc3' into next

Merge with mainline to bring in timer_shutdown_sync() API.