Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4

Merge drm/drm-next into drm-intel-gt-next

Work that needs to land in drm-intel-gt-next depends on two patches only
present in drm-intel-next, absence of which is causing a merge conflict:

3b918f4f0c8b ("drm/i915/pxp: Optimize GET_PARAM:PXP_STATUS")
ac765b7018f6 ("drm/i915/pxp/mtl: intel_pxp_init_hw needs runtime-pm inside pm-complete")

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge branch 'for-6.7/config_pm' into for-linus

- #ifdef CONFIG_PM removal from HID code (Thomas Weißschuh)

Merge branch 'linus' into smp/core

Pull in upstream to get the fixes so depending changes can be applied.

Merge drm/drm-next into drm-misc-next

Updating drm-misc-next to the state of Linux v6.6-rc2.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v6.6-rc4' into perf/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v6.6-rc2' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.6-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Forwarding to v6.6-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
"Many small changes across the subystem, some highlights:

- Usual driver

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma

Pull rdma updates from Jason Gunthorpe:
"Many small changes across the subystem, some highlights:

- Usual driver cleanups in qedr, siw, erdma, hfi1, mlx4/5, irdma,
mthca, hns, and bnxt_re

- siw now works over tunnel and other netdevs with a MAC address by
removing assumptions about a MAC/GID from the connection manager

- "Doorbell Pacing" for bnxt_re - this is a best effort scheme to
allow userspace to slow down the doorbell rings if the HW gets full

- irdma egress VLAN priority, better QP/WQ sizing

- rxe bug fixes in queue draining and srq resizing

- Support more ethernet speed options in the core layer

- DMABUF support for bnxt_re

- Multi-stage MTT support for erdma to allow much bigger MR
registrations

- A irdma fix with a CVE that came in too late to go to -rc, missing
bounds checking for 0 length MRs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (87 commits)
IB/hfi1: Reduce printing of errors during driver shut down
RDMA/hfi1: Move user SDMA system memory pinning code to its own file
RDMA/hfi1: Use list_for_each_entry() helper
RDMA/mlx5: Fix trailing */ formatting in block comment
RDMA/rxe: Fix redundant break statement in switch-case.
RDMA/efa: Fix wrong resources deallocation order
RDMA/siw: Call llist_reverse_order in siw_run_sq
RDMA/siw: Correct wrong debug message
RDMA/siw: Balance the reference of cep->kref in the error path
Revert "IB/isert: Fix incorrect release of isert connection"
RDMA/bnxt_re: Fix kernel doc errors
RDMA/irdma: Prevent zero-length STAG registration
RDMA/erdma: Implement hierarchical MTT
RDMA/erdma: Refactor the storage structure of MTT entries
RDMA/erdma: Renaming variable names and field names of struct erdma_mem
RDMA/hns: Support hns HW stats
RDMA/hns: Dump whole QP/CQ/MR resource in raw
RDMA/irdma: Add missing kernel-doc in irdma_setup_umode_qp()
RDMA/mlx4: Copy union directly
RDMA/irdma: Drop unused kernel push code
...

show more ...

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocat

Merge tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Paolo Abeni:
"Core:

- Increase size limits for to-be-sent skb frag allocations. This
allows tun, tap devices and packet sockets to better cope with
large writes operations

- Store netdevs in an xarray, to simplify iterating over netdevs

- Refactor nexthop selection for multipath routes

- Improve sched class lifetime handling

- Add backup nexthop ID support for bridge

- Implement drop reasons support in openvswitch

- Several data races annotations and fixes

- Constify the sk parameter of routing functions

- Prepend kernel version to netconsole message

Protocols:

- Implement support for TCP probing the peer being under memory
pressure

- Remove hard coded limitation on IPv6 specific info placement inside
the socket struct

- Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
socket scaling factor

- Scaling-up the IPv6 expired route GC via a separated list of
expiring routes

- In-kernel support for the TLS alert protocol

- Better support for UDP reuseport with connected sockets

- Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
header size

- Get rid of additional ancillary per MPTCP connection struct socket

- Implement support for BPF-based MPTCP packet schedulers

- Format MPTCP subtests selftests results in TAP

- Several new SMC 2.1 features including unique experimental options,
max connections per lgr negotiation, max links per lgr negotiation

BPF:

- Multi-buffer support in AF_XDP

- Add multi uprobe BPF links for attaching multiple uprobes and usdt
probes, which is significantly faster and saves extra fds

- Implement an fd-based tc BPF attach API (TCX) and BPF link support
on top of it

- Add SO_REUSEPORT support for TC bpf_sk_assign

- Support new instructions from cpu v4 to simplify the generated code
and feature completeness, for x86, arm64, riscv64

- Support defragmenting IPv(4|6) packets in BPF

- Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
perf+libbpf issue related to custom section handling

- Introduce bpf map element count and enable it for all program types

- Add a BPF hook in sys_socket() to change the protocol ID from
IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

- Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

- Add uprobe support for the bpf_get_func_ip helper

- Check skb ownership against full socket

- Support for up to 12 arguments in BPF trampoline

- Extend link_info for kprobe_multi and perf_event links

Netfilter:

- Speed-up process exit by aborting ruleset validation if a fatal
signal is pending

- Allow NLA_POLICY_MASK to be used with BE16/BE32 types

Driver API:

- Page pool optimizations, to improve data locality and cache usage

- Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
need for raw ioctl() handling in drivers

- Simplify genetlink dump operations (doit/dumpit) providing them the
common information already populated in struct genl_info

- Extend and use the yaml devlink specs to [re]generate the split ops

- Introduce devlink selective dumps, to allow SF filtering SF based
on handle and other attributes

- Add yaml netlink spec for netlink-raw families, allow route, link
and address related queries via the ynl tool

- Remove phylink legacy mode support

- Support offload LED blinking to phy

- Add devlink port function attributes for IPsec

New hardware / drivers:

- Ethernet:
- Broadcom ASP 2.0 (72165) ethernet controller
- MediaTek MT7988 SoC
- Texas Instruments AM654 SoC
- Texas Instruments IEP driver
- Atheros qca8081 phy
- Marvell 88Q2110 phy
- NXP TJA1120 phy

- WiFi:
- MediaTek mt7981 support

- Can:
- Kvaser SmartFusion2 PCI Express devices
- Allwinner T113 controllers
- Texas Instruments tcan4552/4553 chips

- Bluetooth:
- Intel Gale Peak
- Qualcomm WCN3988 and WCN7850
- NXP AW693 and IW624
- Mediatek MT2925

Drivers:

- Ethernet NICs:
- nVidia/Mellanox:
- mlx5:
- support UDP encapsulation in packet offload mode
- IPsec packet offload support in eswitch mode
- improve aRFS observability by adding new set of counters
- extends MACsec offload support to cover RoCE traffic
- dynamic completion EQs
- mlx4:
- convert to use auxiliary bus instead of custom interface
logic
- Intel
- ice:
- implement switchdev bridge offload, even for LAG
interfaces
- implement SRIOV support for LAG interfaces
- igc:
- add support for multiple in-flight TX timestamps
- Broadcom:
- bnxt:
- use the unified RX page pool buffers for XDP and non-XDP
- use the NAPI skb allocation cache
- OcteonTX2:
- support Round Robin scheduling HTB offload
- TC flower offload support for SPI field
- Freescale:
- add XDP_TX feature support
- AMD:
- ionic: add support for PCI FLR event
- sfc:
- basic conntrack offload
- introduce eth, ipv4 and ipv6 pedit offloads
- ST Microelectronics:
- stmmac: maximze PTP timestamping resolution

- Virtual NICs:
- Microsoft vNIC:
- batch ringing RX queue doorbell on receiving packets
- add page pool for RX buffers
- Virtio vNIC:
- add per queue interrupt coalescing support
- Google vNIC:
- add queue-page-list mode support

- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add port range matching tc-flower offload
- permit enslavement to netdevices with uppers

- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- convert to phylink_pcs
- Renesas:
- r8A779fx: add speed change support
- rzn1: enables vlan support

- Ethernet PHYs:
- convert mv88e6xxx to phylink_pcs

- WiFi:
- Qualcomm Wi-Fi 7 (ath12k):
- extremely High Throughput (EHT) PHY support
- RealTek (rtl8xxxu):
- enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
RTL8192EU and RTL8723BU
- RealTek (rtw89):
- Introduce Time Averaged SAR (TAS) support

- Connector:
- support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
net: stmmac: clarify difference between "interface" and "phy_interface"
r8152: add vendor/device ID pair for D-Link DUB-E250
devlink: move devlink_notify_register/unregister() to dev.c
devlink: move small_ops definition into netlink.c
devlink: move tracepoint definitions into core.c
devlink: push linecard related code into separate file
devlink: push rate related code into separate file
devlink: push trap related code into separate file
devlink: use tracepoint_enabled() helper
devlink: push region related code into separate file
devlink: push param related code into separate file
devlink: push resource related code into separate file
devlink: push dpipe related code into separate file
devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
devlink: push shared buffer related code into separate file
devlink: push port related code into separate file
devlink: push object register/unregister notifications into separate helpers
inet: fix IP_TRANSPARENT error handling
...

show more ...

Merge branch 'mlx4-aux-bus'

Petr Pavlu says:

====================
Convert mlx4 to use auxiliary bus

This series converts the mlx4 drivers to use auxiliary bus, similarly to
how mlx5 was converted

Merge branch 'mlx4-aux-bus'

Petr Pavlu says:

====================
Convert mlx4 to use auxiliary bus

This series converts the mlx4 drivers to use auxiliary bus, similarly to
how mlx5 was converted [1]. The first 6 patches are preparatory changes,
the remaining 4 are the final conversion.

Initial motivation for this change was to address a problem related to
loading mlx4_en/mlx4_ib by mlx4_core using request_module_nowait(). When
doing such a load in initrd, the operation is asynchronous to any init
control and can get unexpectedly affected/interrupted by an eventual
root switch. Using an auxiliary bus leaves these module loads to udevd
which better integrates with systemd processing. [2]

General benefit is to get rid of custom interface logic and instead use
a common facility available for this task. An obvious risk is that some
new bug is introduced by the conversion.

Leon Romanovsky was kind enough to check for me that the series passes
their verification tests.

Changes since v2 [3]:
* Use 'void *' as the event param of mlx4_dispatch_event().

Changes since v1 [4]:
* Fix a missing definition of the err variable in mlx4_en_add().
* Remove not needed comments about the event type in mlx4_en_event()
and mlx4_ib_event().

[1] https://lore.kernel.org/netdev/20201101201542.2027568-1-leon@kernel.org/
[2] https://lore.kernel.org/netdev/0a361ac2-c6bd-2b18-4841-b1b991f0635e@suse.com/
[3] https://lore.kernel.org/netdev/20230813145127.10653-1-petr.pavlu@suse.com/
[4] https://lore.kernel.org/netdev/20230804150527.6117-1-petr.pavlu@suse.com/
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mlx4: Connect the infiniband part to the auxiliary bus

Use the auxiliary bus to perform device management of the infiniband
part of the mlx4 driver.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>

mlx4: Connect the infiniband part to the auxiliary bus

Use the auxiliary bus to perform device management of the infiniband
part of the mlx4 driver.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mlx4: Replace the mlx4_interface.event callback with a notifier

Use a notifier to implement mlx4_dispatch_event() in preparation to
switch mlx4_en and mlx4_ib to be an auxiliary device.

A problem i

mlx4: Replace the mlx4_interface.event callback with a notifier

Use a notifier to implement mlx4_dispatch_event() in preparation to
switch mlx4_en and mlx4_ib to be an auxiliary device.

A problem is that if the mlx4_interface.event callback was replaced with
something as mlx4_adrv.event then the implementation of
mlx4_dispatch_event() would need to acquire a lock on a given device
before executing this callback. That is necessary because otherwise
there is no guarantee that the associated driver cannot get unbound when
the callback is running. However, taking this lock is not possible
because mlx4_dispatch_event() can be invoked from the hardirq context.
Using an atomic notifier allows the driver to accurately record when it
wants to receive these events and solves this problem.

A handler registration is done by both mlx4_en and mlx4_ib at the end of
their mlx4_interface.add callback. This matches the current situation
when mlx4_add_device() would enable events for a given device
immediately after this callback, by adding the device on the
mlx4_priv.list.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mlx4: Use 'void *' as the event param of mlx4_dispatch_event()

Function mlx4_dispatch_event() takes an 'unsigned long' as its event
parameter. The actual value is none (MLX4_DEV_EVENT_CATASTROPHIC_E

mlx4: Use 'void *' as the event param of mlx4_dispatch_event()

Function mlx4_dispatch_event() takes an 'unsigned long' as its event
parameter. The actual value is none (MLX4_DEV_EVENT_CATASTROPHIC_ERROR),
a pointer to mlx4_eqe (MLX4_DEV_EVENT_PORT_MGMT_CHANGE), or a 32-bit
integer (remaining events).

In preparation to switch mlx4_en and mlx4_ib to be an auxiliary device,
the mlx4_interface.event callback is replaced with a notifier and
function mlx4_dispatch_event() gets updated to invoke
atomic_notifier_call_chain(). This requires forwarding the input 'param'
value from the former function to the latter. A problem is that the
notifier call takes 'void *' as its 'param' value, compared to
'unsigned long' used by mlx4_dispatch_event(). Re-passing the value
would need either punning it to 'void *' or passing down the address of
the input 'param'. Both approaches create a number of unnecessary casts.

Change instead the input 'param' of mlx4_dispatch_event() from
'unsigned long' to 'void *'. A mlx4_eqe pointer can be passed directly,
callers using an int value are adjusted to pass its address.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

mlx4: Get rid of the mlx4_interface.get_dev callback

Simplify the mlx4 driver interface by removing mlx4_get_protocol_dev()
and the associated mlx4_interface.get_dev callbacks. This is done in
prepa

mlx4: Get rid of the mlx4_interface.get_dev callback

Simplify the mlx4 driver interface by removing mlx4_get_protocol_dev()
and the associated mlx4_interface.get_dev callbacks. This is done in
preparation to use an auxiliary bus to model the mlx4 driver structure.

The change is motivated by the following situation:
* The mlx4_en interface is being initialized by mlx4_en_add() and
mlx4_en_activate().
* The latter activate function calls mlx4_en_init_netdev() ->
register_netdev() to register a new net_device.
* A netdev event NETDEV_REGISTER is raised for the device.
* The netdev notififier mlx4_ib_netdev_event() is called and it invokes
mlx4_ib_scan_netdevs() -> mlx4_get_protocol_dev() ->
mlx4_en_get_netdev() [via mlx4_interface.get_dev].

This chain creates a problem when mlx4_en gets switched to be an
auxiliary driver. It contains two device calls which would both need to
take a respective device lock.

Avoid this situation by updating mlx4_ib_scan_netdevs() to no longer
call mlx4_get_protocol_dev() but instead to utilize the information
passed in net_device.parent and net_device.dev_port. This data is
sufficient to determine that an updated port is one that the mlx4_ib
driver should take care of and to keep mlx4_ib_dev.iboe.netdevs up to
date.

Following that, update mlx4_ib_get_netdev() to also not call
mlx4_get_protocol_dev() and instead scan all current netdevs to find
find a matching one. Note that mlx4_ib_get_netdev() is called early from
ib_register_device() and cannot use data tracked in
mlx4_ib_dev.iboe.netdevs which is not at that point yet set.

Finally, remove function mlx4_get_protocol_dev() and the
mlx4_interface.get_dev callbacks (only mlx4_en_get_netdev()) as they
became unused.

Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Tested-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

RDMA/mlx4: Copy union directly

Copy union directly instead of using memcpy().

Note that in this case, a direct assignment is more readable and
consistent with the subsequent assignments.

This addr

RDMA/mlx4: Copy union directly

Copy union directly instead of using memcpy().

Note that in this case, a direct assignment is more readable and
consistent with the subsequent assignments.

This addresses the following -Wstringop-overflow warning seen in s390
with defconfig:
drivers/infiniband/hw/mlx4/main.c:296:33: warning: writing 16 bytes into a region of size 0 [-Wstringop-overflow=]
296 | memcpy(&port_gid_table->gids[free].gid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
297 | &attr->gid, sizeof(attr->gid));
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

This helps with the ongoing efforts to globally enable
-Wstringop-overflow.

Link: https://github.com/KSPP/linux/issues/308
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZNvimeRAPkJ24zRG@work
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

RDMA/mlx: Remove unnecessary variable initializations

Remove unnecessary variable initializations.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230728065139.

RDMA/mlx: Remove unnecessary variable initializations

Remove unnecessary variable initializations.

Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com>
Link: https://lore.kernel.org/r/20230728065139.3411703-1-ruanjinjie@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.4 merge window.

Merge branch 'for-6.4/amd-sfh' into for-linus

- assorted functional fixes for amd-sfh driver (Basavaraj Natikar)

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to

Merge drm/drm-next into drm-intel-gt-next

Need to pull in commit from drm-next (earlier in drm-intel-next):

1eca0778f4b3 ("drm/i915: add struct i915_dsm to wrap dsm members together")

In order to merge following patch to drm-intel-gt-next:

https://patchwork.freedesktop.org/patch/530942/?series=114925&rev=6

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Catch up with 6.3-rc cycle...

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <ro

Merge remote-tracking branch 'drm/drm-next' into msm-next

Merge drm-next into msm-next to pick up external clk and PM dependencies
for improved a6xx GPU reset sequence.

Signed-off-by: Rob Clark <robdclark@chromium.org>

show more ...

Merge tag 'v6.3-rc2' into next

Merge with mainline to get of_property_present() and other newer APIs.