Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Enable Configuration RRS SV, which makes device readi

Merge tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Enable Configuration RRS SV, which makes device readiness visible,
early instead of during child bus scanning (Bjorn Helgaas)

- Log debug messages about reset methods being used (Bjorn Helgaas)

- Avoid reset when it has been disabled via sysfs (Nishanth
Aravamudan)

- Add common pci-ep-bus.yaml schema for exporting several peripherals
of a single PCI function via devicetree (Andrea della Porta)

- Create DT nodes for PCI host bridges to enable loading device tree
overlays to create platform devices for PCI devices that have
several features that require multiple drivers (Herve Codina)

Resource management:

- Enlarge devres table[] to accommodate bridge windows, ROM, IOV
BARs, etc., and validate BAR index in devres interfaces (Philipp
Stanner)

- Fix typo that repeatedly distributed resources to a bridge instead
of iterating over subordinate bridges, which resulted in too little
space to assign some BARs (Kai-Heng Feng)

- Relax bridge window tail sizing for optional resources, e.g., IOV
BARs, to avoid failures when removing and re-adding devices (Ilpo
Järvinen)

- Allow drivers to enable devices even if we haven't assigned
optional IOV resources to them (Ilpo Järvinen)

- Rework handling of optional resources (IOV BARs, ROMs) to reduce
failures if we can't allocate them (Ilpo Järvinen)

- Fix a NULL dereference in the SR-IOV VF creation error path (Shay
Drory)

- Fix s390 mmio_read/write syscalls, which didn't cause page faults
in some cases, which broke vfio-pci lazy mapping on first access
(Niklas Schnelle)

- Add pdev->non_mappable_bars to replace CONFIG_VFIO_PCI_MMAP, which
was disabled only for s390 (Niklas Schnelle)

- Support mmap of PCI resources on s390 except for ISM devices
(Niklas Schnelle)

ASPM:

- Delay pcie_link_state deallocation to avoid dangling pointers that
cause invalid references during hot-unplug (Daniel Stodden)

Power management:

- Allow PCI bridges to go to D3Hot when suspending on all non-x86
systems (Manivannan Sadhasivam)

Power control:

- Create pwrctrl devices in pci_scan_device() to make it more
symmetric with pci_pwrctrl_unregister() and make pwrctrl devices
for PCI bridges possible (Manivannan Sadhasivam)

- Unregister pwrctrl devices in pci_destroy_dev() so DOE, ASPM, etc.
can still access devices after pci_stop_dev() (Manivannan
Sadhasivam)

- If there's a pwrctrl device for a PCI device, skip scanning it
because the pwrctrl core will rescan the bus after the device is
powered on (Manivannan Sadhasivam)

- Add a pwrctrl driver for PCI slots based on voltage regulators
described via devicetree (Manivannan Sadhasivam)

Bandwidth control:

- Add set_pcie_speed.sh to TEST_PROGS to fix issue when executing the
set_pcie_cooling_state.sh test case (Yi Lai)

- Avoid a NULL pointer dereference when we run out of bus numbers to
assign for a bridge secondary bus (Lukas Wunner)

Hotplug:

- Drop superfluous pci_hotplug_slot_list, try_module_get() calls, and
NULL pointer checks (Lukas Wunner)

- Drop shpchp module init/exit logging, replace shpchp dbg() with
ctrl_dbg(), and remove unused dbg(), err(), info(), warn() wrappers
(Ilpo Järvinen)

- Drop 'shpchp_debug' module parameter in favor of standard dynamic
debugging (Ilpo Järvinen)

- Drop unused cpcihp .get_power(), .set_power() function pointers
(Guilherme Giacomo Simoes)

- Disable hotplug interrupts in portdrv only when pciehp is not
enabled to avoid issuing two hotplug commands too close together
(Feng Tang)

- Skip pciehp 'device replaced' check if the device has been removed
to address a deadlock when resuming after a device was removed
during system sleep (Lukas Wunner)

- Don't enable pciehp hotplug interupt when resuming in poll mode
(Ilpo Järvinen)

Virtualization:

- Fix bugs in 'pci=config_acs=' kernel command line parameter (Tushar
Dave)

DOE:

- Expose supported DOE features via sysfs (Alistair Francis)

- Allow DOE support to be enabled even if CXL isn't enabled (Alistair
Francis)

Endpoint framework:

- Convert PCI device data so pci-epf-test works correctly on
big-endian endpoint systems (Niklas Cassel)

- Add BAR_RESIZABLE type to endpoint framework and add DWC core
support for EPF drivers to set BAR_RESIZABLE type and size (Niklas
Cassel)

- Fix pci-epf-test double free that causes an oops if the host
reboots and PERST# deassertion restarts endpoint BAR allocation
(Christian Bruel)

- Fix endpoint BAR testing so tests can skip disabled BARs instead of
reporting them as failures (Niklas Cassel)

- Widen endpoint test BAR size variable to accommodate BARs larger
than INT_MAX (Niklas Cassel)

- Remove unused tools 'pci' build target left over after moving tests
to tools/testing/selftests/pci_endpoint (Jianfeng Liu)

Altera PCIe controller driver:

- Add DT binding and driver support for Agilex family (P-Tile,
F-Tile, R-Tile) (Matthew Gerlach and D M, Sharath Kumar)

AMD MDB PCIe controller driver:

- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)

Broadcom STB PCIe controller driver:

- Add BCM2712 MSI-X DT binding and interrupt controller drivers and
add softdep on irq_bcm2712_mip driver to ensure that it is loaded
first (Stanimir Varbanov)

- Expand inbound window map to 64GB so it can accommodate BCM2712
(Stanimir Varbanov)

- Add BCM2712 support and DT updates (Stanimir Varbanov)

- Apply link speed restriction before bringing link up, not after
(Jim Quinlan)

- Update Max Link Speed in Link Capabilities via the internal
writable register, not the read-only config register (Jim Quinlan)

- Handle regulator_bulk_get() error to avoid panic when we call
regulator_bulk_free() later (Jim Quinlan)

- Disable regulators only when removing the bus immediately below a
Root Port because we don't support regulators deeper in the
hierarchy (Jim Quinlan)

- Make const read-only arrays static (Colin Ian King)

Cadence PCIe endpoint driver:

- Correct MSG TLP generation so endpoints can generate INTx messages
(Hans Zhang)

Freescale i.MX6 PCIe controller driver:

- Identify the second controller on i.MX8MQ based on devicetree
'linux,pci-domain' instead of DBI 'reg' address (Richard Zhu)

- Remove imx_pcie_cpu_addr_fixup() since dwc core can now derive the
ATU input address (using parent_bus_offset) from devicetree (Frank
Li)

Freescale Layerscape PCIe controller driver:

- Drop deprecated 'num-ib-windows' and 'num-ob-windows' and
unnecessary 'status' from example (Krzysztof Kozlowski)

- Correct the syscon_regmap_lookup_by_phandle_args("fsl,pcie-scfg")
arg_count to fix probe failure on LS1043A (Ioana Ciornei)

HiSilicon STB PCIe controller driver:

- Call phy_exit() to clean up if histb_pcie_probe() fails (Christophe
JAILLET)

Intel Gateway PCIe controller driver:

- Remove intel_pcie_cpu_addr() since dwc core can now derive the ATU
input address (using parent_bus_offset) from devicetree (Frank Li)

Intel VMD host bridge driver:

- Convert vmd_dev.cfg_lock from spinlock_t to raw_spinlock_t so
pci_ops.read() will never sleep, even on PREEMPT_RT where
spinlock_t becomes a sleepable lock, to avoid calling a sleeping
function from invalid context (Ryo Takakura)

MediaTek PCIe Gen3 controller driver:

- Remove leftover mac_reset assert for Airoha EN7581 SoC (Lorenzo
Bianconi)

- Add EN7581 PBUS controller 'mediatek,pbus-csr' DT property and
program host bridge memory aperture to this syscon node (Lorenzo
Bianconi)

Qualcomm PCIe controller driver:

- Add qcom,pcie-ipq5332 binding (Varadarajan Narayanan)

- Add qcom i.MX8QM and i.MX8QXP/DXP optional DMA interrupt (Alexander
Stein)

- Add optional dma-coherent DT property for Qualcomm SA8775P (Dmitry
Baryshkov)

- Make DT iommu property required for SA8775P and prohibited for
SDX55 (Dmitry Baryshkov)

- Add DT IOMMU and DMA-related properties for Qualcomm SM8450 (Dmitry
Baryshkov)

- Add endpoint DT properties for SAR2130P and enable endpoint mode in
driver (Dmitry Baryshkov)

- Describe endpoint BAR0 and BAR2 as 64-bit only and BAR1 and BAR3 as
RESERVED (Manivannan Sadhasivam)

Rockchip DesignWare PCIe controller driver:

- Describe rk3568 and rk3588 BARs as Resizable, not Fixed (Niklas
Cassel)

Synopsys DesignWare PCIe controller driver:

- Add debugfs-based Silicon Debug, Error Injection, Statistical
Counter support for DWC (Shradha Todi)

- Add debugfs property to expose LTSSM status of DWC PCIe link (Hans
Zhang)

- Add Rockchip support for DWC debugfs features (Niklas Cassel)

- Add dw_pcie_parent_bus_offset() to look up the parent bus address
of a specified 'reg' property and return the offset from the CPU
physical address (Frank Li)

- Use dw_pcie_parent_bus_offset() to derive CPU -> ATU addr offset
via 'reg[config]' for host controllers and 'reg[addr_space]' for
endpoint controllers (Frank Li)

- Apply struct dw_pcie.parent_bus_offset in ATU users to remove use
of .cpu_addr_fixup() when programming ATU (Frank Li)

TI J721E PCIe driver:

- Correct the 'link down' interrupt bit for J784S4 (Siddharth
Vadapalli)

TI Keystone PCIe controller driver:

- Describe AM65x BARs 2 and 5 as Resizable (not Fixed) and reduce
alignment requirement from 1MB to 64KB (Niklas Cassel)

Xilinx Versal CPM PCIe controller driver:

- Free IRQ domain in probe error path to avoid leaking it
(Thippeswamy Havalige)

- Add DT .compatible "xlnx,versal-cpm5nc-host" and driver support for
Versal Net CPM5NC Root Port controller (Thippeswamy Havalige)

- Add driver support for CPM5_HOST1 (Thippeswamy Havalige)

Miscellaneous:

- Convert fsl,mpc83xx-pcie binding to YAML (J. Neuschäfer)

- Use for_each_available_child_of_node_scoped() to simplify apple,
kirin, mediatek, mt7621, tegra drivers (Zhang Zekun)"

* tag 'pci-v6.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (197 commits)
PCI: layerscape: Fix arg_count to syscon_regmap_lookup_by_phandle_args()
PCI: j721e: Fix the value of .linkdown_irq_regfield for J784S4
misc: pci_endpoint_test: Add support for PCITEST_IRQ_TYPE_AUTO
PCI: endpoint: pci-epf-test: Expose supported IRQ types in CAPS register
PCI: dw-rockchip: Endpoint mode cannot raise INTx interrupts
PCI: endpoint: Add intx_capable to epc_features struct
dt-bindings: PCI: Add common schema for devices accessible through PCI BARs
PCI: intel-gw: Remove intel_pcie_cpu_addr()
PCI: imx6: Remove imx_pcie_cpu_addr_fixup()
PCI: dwc: Use parent_bus_offset to remove need for .cpu_addr_fixup()
PCI: dwc: ep: Ensure proper iteration over outbound map windows
PCI: dwc: ep: Use devicetree 'reg[addr_space]' to derive CPU -> ATU addr offset
PCI: dwc: ep: Consolidate devicetree handling in dw_pcie_ep_get_resources()
PCI: dwc: ep: Call epc_create() early in dw_pcie_ep_init()
PCI: dwc: Use devicetree 'reg[config]' to derive CPU -> ATU addr offset
PCI: dwc: Add dw_pcie_parent_bus_offset() checking and debug
PCI: dwc: Add dw_pcie_parent_bus_offset()
PCI/bwctrl: Fix NULL pointer dereference on bus number exhaustion
PCI: xilinx-cpm: Add cpm_csr register mapping for CPM5_HOST1 variant
PCI: brcmstb: Make const read-only arrays static
...

show more ...

Merge branch 'pci/controller/amd-mdb'

- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)

* pci/controller/amd-mdb:
PCI: amd-mdb: Add AMD MDB Root Port driver

Merge branch 'pci/controller/amd-mdb'

- Add DT binding and driver for AMD MDB (Multimedia DMA Bridge)
(Thippeswamy Havalige)

* pci/controller/amd-mdb:
PCI: amd-mdb: Add AMD MDB Root Port driver
dt-bindings: PCI: amd-mdb: Add AMD Versal2 MDB PCIe Root Port Bridge
dt-bindings: PCI: dwc: Add AMD Versal2 MDB SLCR support

show more ...

dt-bindings: PCI: dwc: Add AMD Versal2 MDB SLCR support

Add support for MDB System Level Control and Status Register (SLCR)
aperture that is only supported for AMD Versal2 devices.

Signed-off-by: T

dt-bindings: PCI: dwc: Add AMD Versal2 MDB SLCR support

Add support for MDB System Level Control and Status Register (SLCR)
aperture that is only supported for AMD Versal2 devices.

Signed-off-by: Thippeswamy Havalige <thippeswamy.havalige@amd.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20250228093351.923615-2-thippeswamy.havalige@amd.com
[kwilczynski: commit log]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge branch 'linus' into x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'next' into for-linus

Prepare input updates for 6.14 merge window.

Merge branch 'for-6.14/constify-bin-attribute' into for-linus

- constification of 'struct bin_attribute' in various HID driver (Thomas Weißschuh)

Merge tag 'v6.13-rc3' into next

Sync up with the mainline.

Merge remote-tracking branch 'pm/opp/linux-next' into HEAD

Merge pm/opp tree to get dev_pm_opp_get_bw()

Signed-off-by: Rob Clark <robdclark@chromium.org>

Merge drm/drm-next into drm-intel-next

Catching up with 6.13-rc2.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-xe-next

A backmerge to get the PMT preparation work for
merging the BMG PMT support.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-misc-next

Kickstart 6.14 cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge tag 'v6.13-rc1' into perf/core, to refresh the branch

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest t

Merge tag 'asoc-fix-v6.13-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v6.13

A few small fixes for v6.13, all system specific - the biggest thing is
the fix for jack handling over suspend on some Intel laptops.

show more ...

Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Make pci_stop_dev() and pci_destroy_dev() safe so con

Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
"Enumeration:

- Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
callers can't stop a device multiple times, even as we migrate from
the global pci_rescan_remove_lock to finer-grained locking (Keith
Busch)

- Improve pci_walk_bus() implementation by making it recursive and
moving locking up to avoid need for a 'locked' parameter (Keith
Busch)

- Unexport pci_walk_bus_locked(), which is only used internally by
the PCI core (Keith Busch)

- Detect some Thunderbolt chips that are built-in and hence
'trustworthy' by a heuristic since the 'ExternalFacingPort' and
'usb4-host-interface' ACPI properties are not quite enough (Esther
Shimanovich)

Resource management:

- Use PCI bus addresses (not CPU addresses) in 'ranges' properties
when building dynamic DT nodes so systems where PCI and CPU
addresses differ work correctly (Andrea della Porta)

- Tidy resource sizing and assignment with helpers to reduce
redundancy (Ilpo Järvinen)

- Improve pdev_sort_resources() 'bogus alignment' warning to be more
specific (Ilpo Järvinen)

Driver binding:

- Convert driver .remove_new() callbacks to .remove() again to finish
the conversion from returning 'int' to being 'void' (Sergio
Paracuellos)

- Export pcim_request_all_regions(), a managed interface to request
all BARs (Philipp Stanner)

- Replace pcim_iomap_regions_request_all() with
pcim_request_all_regions(), and pcim_iomap_table()[n] with
pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
(Philipp Stanner)

- Remove the now unused pcim_iomap_regions_request_all() (Philipp
Stanner)

- Export pcim_iounmap_region(), a managed interface to unmap and
release a PCI BAR (Philipp Stanner)

- Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
cavium (Philipp Stanner)

Error handling:

- Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
bridge; previously Secondary Bus Reset could only be used when
there was a single device below a bridge (Keith Busch)

- Warn if we reset a running device where the driver didn't register
pci_error_handlers notification callbacks (Keith Busch)

ASPM:

- Disable ASPM L1 before touching L1 PM Substates to follow the spec
closer and avoid a CPU load timeout on some platforms (Ajay
Agarwal)

- Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
as required per spec for all L1 Substates changes (Jian-Hong Pan)

Power management:

- Enable starfive controller runtime PM before probing host bridge
(Mayank Rana)

- Enable runtime power management for host bridges (Krishna chaitanya
chundru)

Power control:

- Use of_platform_device_create() instead of of_platform_populate()
to create pwrctl platform devices so we can control it based on the
child nodes (Manivannan Sadhasivam)

- Create pwrctrl platform devices only if there's a relevant power
supply property (Manivannan Sadhasivam)

- Add device link from the pwrctl supplier to the PCI dev to ensure
pwrctl drivers are probed before the PCI dev driver; this avoids a
race where pwrctl could change device power state while the PCI
driver was active (Manivannan Sadhasivam)

- Find pwrctl device for removal with of_find_device_by_node()
instead of searching all children of the parent (Manivannan
Sadhasivam)

- Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
('bwctrl') and hotplug files (Bjorn Helgaas)

Bandwidth control:

- Add read/modify/write locking for Link Control 2, which is used to
manage Link speed (Ilpo Järvinen)

- Extract Link Bandwidth Management Status check into
pcie_lbms_seen(), where it can be shared between the bandwidth
controller and quirks that use it to help retrain failed links
(Ilpo Järvinen)

- Re-add Link Bandwidth notification support with updates to address
the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
Järvinen)

- Add pcie_set_target_speed() and related functionality so drivers
can manage PCIe Link speed based on thermal or other constraints
(Ilpo Järvinen)

- Add a thermal cooling driver to throttle PCIe Links via the
existing thermal management framework (Ilpo Järvinen)

- Add a userspace selftest for the PCIe bandwidth controller (Ilpo
Järvinen)

PCI device hotplug:

- Add hotplug controller driver for Marvell OCTEON multi-function
device where function 0 has a management console interface to
enable/disable and provision various personalities for the other
functions (Shijith Thotton)

- Retain a reference to the pci_bus for the lifetime of a pci_slot to
avoid a use-after-free when the thunderbolt driver resets USB4 host
routers on boot, causing hotplug remove/add of downstream docks or
other devices (Lukas Wunner)

- Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
(Guilherme Giacomo Simoes)

- Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)

- Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
detection in cpqphp (Ilpo Järvinen)

- Simplify cpqphp enumeration, which is already simple-minded and
doesn't handle devices below hot-added bridges (Ilpo Järvinen)

Virtualization:

- Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
capability but do isolate functions as though PCI_ACS_RR and
PCI_ACS_CR were set, so the functions can be in independent IOMMU
groups (Mengyuan Lou)

TLP Processing Hints (TPH):

- Add and document TLP Processing Hints (TPH) support so drivers can
enable and disable TPH and the kernel can save/restore TPH
configuration (Wei Huang)

- Add TPH Steering Tag support so drivers can retrieve Steering Tag
values associated with specific CPUs via an ACPI _DSM to improve
performance by directing DMA writes closer to their consumers (Wei
Huang)

Data Object Exchange (DOE):

- Wait up to 1 second for DOE Busy bit to clear before writing a
request to the mailbox to avoid failures if the mailbox is still
busy from a previous transfer (Gregory Price)

Endpoint framework:

- Skip attempts to allocate from endpoint controller memory window if
the requested size is larger than the window (Damien Le Moal)

- Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
handle controller-specific size and alignment constraints, and add
test cases to the endpoint test driver (Damien Le Moal)

- Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
observe DWC-specific alignment requirements (Damien Le Moal)

- Synchronously cancel command handler work in endpoint test before
cleaning up DMA and BARs (Damien Le Moal)

- Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
Cassel)

- Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
(Niklas Cassel)

- Avoid NULL dereference if Modem Host Interface Endpoint lacks
'mmio' DT property (Zhongqiu Han)

- Release PCI domain ID of Endpoint controller parent (not controller
itself) and before unregistering the controller, to avoid
use-after-free (Zijun Hu)

- Clear secondary (not primary) EPC in pci_epc_remove_epf() when
removing the secondary controller associated with an NTB (Zijun Hu)

Cadence PCIe controller driver:

- Lower severity of 'phy-names' message (Bartosz Wawrzyniak)

Freescale i.MX6 PCIe controller driver:

- Fix suspend/resume support on i.MX6QDL, which has a hardware
erratum that prevents use of L2 (Stefan Eichenberger)

Intel VMD host bridge driver:

- Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)

MediaTek PCIe Gen3 controller driver:

- Update mediatek-gen3 DT binding to require the exact number of
clocks for each SoC (Fei Shao)

- Add support for DT 'max-link-speed' and 'num-lanes' properties to
restrict the link speed and width (AngeloGioacchino Del Regno)

Microchip PolarFlare PCIe controller driver:

- Add DT and driver support for using either of the two PolarFire
Root Ports (Conor Dooley)

NVIDIA Tegra194 PCIe controller driver:

- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)

Qualcomm PCIe controller driver:

- Add qcom SAR2130P DT binding with an additional clock (Dmitry
Baryshkov)

- Enable MSI interrupts if 'global' IRQ is supported, since a
previous commit unintentionally masked them (Manivannan Sadhasivam)

- Move endpoint controller cleanups that depend on refclk from the
host to the notifier that tells us the host has deasserted PERST#,
when refclk should be valid (Manivannan Sadhasivam)

- Add DT binding and driver support for IPQ9574, with Synopsys IP
v5.80a and Qcom IP 1.27.0 (devi priya)

- Move the OPP "operating-points-v2" table from the
qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
can be used by other Qcom platforms (Qiang Yu)

- Add 'global' SPI interrupt for events like link-up, link-down to
qcom,pcie-x1e80100 DT binding so we can start enumeration when the
link comes up (Qiang Yu)

- Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
to support this (Qiang Yu)

- Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
'iommu-map' DT property and doesn't need BDF-to-SID translation
(Qiang Yu)

Rockchip PCIe controller driver:

- Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
.align value (Damien Le Moal)

- When unmapping an endpoint window, compute the region index instead
of searching for it, and verify that the address was mapped (Damien
Le Moal)

- When mapping an endpoint window, verify that the address hasn't
been mapped already (Damien Le Moal)

- Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)

- Fix MSI IRQ data mapping to observe the alignment constraint, which
fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
(Damien Le Moal)

- Rename rockchip_pcie_parse_ep_dt() to
rockchip_pcie_ep_get_resources() for consistency with similar DT
interfaces (Damien Le Moal)

- Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
it only in the endpoint start operation (Damien Le Moal)

- Implement pci_epc_ops.stop_link() to disable link training and
controller configuration (Damien Le Moal)

- Attempt link training at 5 GT/s when both partners support it
(Damien Le Moal)

- Add a handler for PERST# signal so we can detect host-initiated
resets and start link training after PERST# is deasserted (Damien
Le Moal)

Synopsys DesignWare PCIe controller driver:

- Clear outbound address on unmap so dw_pcie_find_index() won't match
an ATU index that was already unmapped (Damien Le Moal)

- Use of_property_present() instead of of_property_read_bool() when
testing for presence of non-boolean DT properties (Rob Herring)

- Advertise 1MB size if endpoint supports Resizable BARs, which was
inadvertently lost in v6.11 (Niklas Cassel)

TI J721E PCIe driver:

- Add PCIe support for J722S SoC (Siddharth Vadapalli)

- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
us), before deasserting PERST# to ensure power and refclk are
stable (Siddharth Vadapalli)

TI Keystone PCIe controller driver:

- Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
Complex mode (Kishon Vijay Abraham I)

- Try to avoid unrecoverable SError for attempts to issue config
transactions when the link is down; this is racy but the best we
can do (Kishon Vijay Abraham I)

Miscellaneous:

- Reorganize kerneldoc parameter names to match order in function
signature (Julia Lawall)

- Fix sysfs reset_method_store() memory leak (Todd Kjos)

- Simplify pci_create_slot() (Ilpo Järvinen)

- Fix incorrect printf format specifiers in pcitest (Luo Yifan)"

* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
PCI: rockchip-ep: Handle PERST# signal in EP mode
PCI: rockchip-ep: Improve link training
PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
PCI: rockchip-ep: Refactor endpoint link training enable
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
PCI: rockchip-ep: Fix MSI IRQ data mapping
PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
PCI: rockchip-ep: Use a macro to define EP controller .align feature
PCI: rockchip-ep: Fix address translation unit programming
PCI/pwrctrl: Rename pwrctrl functions and structures
PCI/pwrctrl: Rename pwrctl files to pwrctrl
PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
PCI/pwrctl: Create pwrctl device only if at least one power supply is present
PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
tools: PCI: Fix incorrect printf format specifiers
...

show more ...

Merge branch 'pci/dt-bindings'

- Update mediatek-gen3 DT binding to require the exact number of clocks for
each SoC (Fei Shao)

- Add qcom SAR2130P DT binding with an additional clock (Dmitry Bary

Merge branch 'pci/dt-bindings'

- Update mediatek-gen3 DT binding to require the exact number of clocks for
each SoC (Fei Shao)

- Add qcom SAR2130P DT binding with an additional clock (Dmitry Baryshkov)

* pci/dt-bindings:
dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example
dt-bindings: PCI: qcom,pcie-sm8550: Add SAR2130P compatible
dt-bindings: PCI: mediatek-gen3: Allow exact number of clocks only

show more ...

dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example

"#interrupt-cells" is not valid without a corresponding "interrupt-map"
or "interrupt-controller" property. As the example has ne

dt-bindings: PCI: snps,dw-pcie: Drop "#interrupt-cells" from example

"#interrupt-cells" is not valid without a corresponding "interrupt-map"
or "interrupt-controller" property. As the example has neither, drop
"#interrupt-cells".

This fixes a dtc interrupt_provider warning.

Link: https://lore.kernel.org/r/20241105213217.442809-1-robh@kernel.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge branch 'next' into for-linus

Prepare input updates for 6.11 merge window.

Merge tag 'v6.9' into next

Sync up with the mainline to bring in the new cleanup API.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>