1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3# 4# This test runs on Intel x86 based hardware which support the intel_pstate 5# driver. The test checks the frequency settings from the maximum turbo 6# state to the minimum supported frequency, in decrements of 100MHz. The 7# test runs the aperf.c program to put load on each processor. 8# 9# The results are displayed in a table which indicate the "Target" state, 10# or the requested frequency in MHz, the Actual frequency, as read from 11# /proc/cpuinfo, the difference between the Target and Actual frequencies, 12# and the value of MSR 0x199 (MSR_IA32_PERF_CTL) which indicates what 13# pstate the cpu is in, and the value of 14# /sys/devices/system/cpu/intel_pstate/max_perf_pct X maximum turbo state 15# 16# Notes: In some cases several frequency values may be placed in the 17# /tmp/result.X files. This is done on purpose in order to catch cases 18# where the pstate driver may not be working at all. There is the case 19# where, for example, several "similar" frequencies are in the file: 20# 21# 22#/tmp/result.3100:1:cpu MHz : 2899.980 23#/tmp/result.3100:2:cpu MHz : 2900.000 24#/tmp/result.3100:3:msr 0x199: 0x1e00 25#/tmp/result.3100:4:max_perf_pct 94 26# 27# and the test will error out in those cases. The result.X file can be checked 28# for consistency and modified to remove the extra MHz values. The result.X 29# files can be re-evaluated by setting EVALUATE_ONLY to 1 below. 30 31EVALUATE_ONLY=0 32 33# Kselftest framework requirement - SKIP code is 4. 34ksft_skip=4 35 36if ! uname -m | sed -e s/i.86/x86/ -e s/x86_64/x86/ | grep -q x86; then 37 echo "$0 # Skipped: Test can only run on x86 architectures." 38 exit $ksft_skip 39fi 40 41msg="skip all tests:" 42if [ $UID != 0 ] && [ $EVALUATE_ONLY == 0 ]; then 43 echo $msg please run this as root >&2 44 exit $ksft_skip 45fi 46 47if ! command -v cpupower &> /dev/null; then 48 echo $msg cpupower could not be found, please install it >&2 49 exit $ksft_skip 50fi 51 52max_cpus=$(($(nproc)-1)) 53 54function run_test () { 55 56 file_ext=$1 57 for cpu in `seq 0 $max_cpus` 58 do 59 echo "launching aperf load on $cpu" 60 ./aperf $cpu & 61 done 62 63 echo "sleeping for 5 seconds" 64 sleep 5 65 grep MHz /proc/cpuinfo | sort -u > /tmp/result.freqs 66 num_freqs=$(wc -l /tmp/result.freqs | awk ' { print $1 } ') 67 if [ $num_freqs -ge 2 ]; then 68 tail -n 1 /tmp/result.freqs > /tmp/result.$1 69 else 70 cp /tmp/result.freqs /tmp/result.$1 71 fi 72 ./msr 0 >> /tmp/result.$1 73 74 max_perf_pct=$(cat /sys/devices/system/cpu/intel_pstate/max_perf_pct) 75 echo "max_perf_pct $max_perf_pct" >> /tmp/result.$1 76 77 for job in `jobs -p` 78 do 79 echo "waiting for job id $job" 80 wait $job 81 done 82} 83 84# 85# MAIN (ALL UNITS IN MHZ) 86# 87 88# Get the marketing frequency 89_mkt_freq=$(cat /proc/cpuinfo | grep -m 1 "model name" | awk '{print $NF}') 90_mkt_freq=$(echo $_mkt_freq | tr -d [:alpha:][:punct:]) 91mkt_freq=${_mkt_freq}0 92 93# Get the ranges from cpupower 94_min_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $1 } ') 95min_freq=$((_min_freq / 1000)) 96_max_freq=$(cpupower frequency-info -l | tail -1 | awk ' { print $2 } ') 97max_freq=$((_max_freq / 1000)) 98 99 100[ $EVALUATE_ONLY -eq 0 ] && for freq in `seq $max_freq -100 $min_freq` 101do 102 echo "Setting maximum frequency to $freq" 103 cpupower frequency-set -g powersave --max=${freq}MHz >& /dev/null 104 run_test $freq 105done 106 107[ $EVALUATE_ONLY -eq 0 ] && cpupower frequency-set -g powersave --max=${max_freq}MHz >& /dev/null 108 109echo "========================================================================" 110echo "The marketing frequency of the cpu is $mkt_freq MHz" 111echo "The maximum frequency of the cpu is $max_freq MHz" 112echo "The minimum frequency of the cpu is $min_freq MHz" 113 114# make a pretty table 115echo "Target Actual Difference MSR(0x199) max_perf_pct" | tr " " "\n" > /tmp/result.tab 116for freq in `seq $max_freq -100 $min_freq` 117do 118 result_freq=$(cat /tmp/result.${freq} | grep "cpu MHz" | awk ' { print $4 } ' | awk -F "." ' { print $1 } ') 119 msr=$(cat /tmp/result.${freq} | grep "msr" | awk ' { print $3 } ') 120 max_perf_pct=$(cat /tmp/result.${freq} | grep "max_perf_pct" | awk ' { print $2 } ' ) 121 cat >> /tmp/result.tab << EOF 122$freq 123$result_freq 124$((result_freq - freq)) 125$msr 126$((max_perf_pct * max_freq)) 127EOF 128done 129 130# print the table 131pr -aTt -5 < /tmp/result.tab 132 133exit 0 134