1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * wm8903.c -- WM8903 ALSA SoC Audio driver
4 *
5 * Copyright 2008-12 Wolfson Microelectronics
6 * Copyright 2011-2012 NVIDIA, Inc.
7 *
8 * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
9 *
10 * TODO:
11 * - TDM mode configuration.
12 */
13
14 #include <linux/module.h>
15 #include <linux/moduleparam.h>
16 #include <linux/init.h>
17 #include <linux/completion.h>
18 #include <linux/delay.h>
19 #include <linux/gpio/driver.h>
20 #include <linux/pm.h>
21 #include <linux/i2c.h>
22 #include <linux/regmap.h>
23 #include <linux/regulator/consumer.h>
24 #include <linux/slab.h>
25 #include <linux/irq.h>
26 #include <linux/mutex.h>
27 #include <sound/core.h>
28 #include <sound/jack.h>
29 #include <sound/pcm.h>
30 #include <sound/pcm_params.h>
31 #include <sound/tlv.h>
32 #include <sound/soc.h>
33 #include <sound/initval.h>
34 #include <sound/wm8903.h>
35 #include <trace/events/asoc.h>
36
37 #include "wm8903.h"
38
39 /* Register defaults at reset */
40 static const struct reg_default wm8903_reg_defaults[] = {
41 { 4, 0x0018 }, /* R4 - Bias Control 0 */
42 { 5, 0x0000 }, /* R5 - VMID Control 0 */
43 { 6, 0x0000 }, /* R6 - Mic Bias Control 0 */
44 { 8, 0x0001 }, /* R8 - Analogue DAC 0 */
45 { 10, 0x0001 }, /* R10 - Analogue ADC 0 */
46 { 12, 0x0000 }, /* R12 - Power Management 0 */
47 { 13, 0x0000 }, /* R13 - Power Management 1 */
48 { 14, 0x0000 }, /* R14 - Power Management 2 */
49 { 15, 0x0000 }, /* R15 - Power Management 3 */
50 { 16, 0x0000 }, /* R16 - Power Management 4 */
51 { 17, 0x0000 }, /* R17 - Power Management 5 */
52 { 18, 0x0000 }, /* R18 - Power Management 6 */
53 { 20, 0x0400 }, /* R20 - Clock Rates 0 */
54 { 21, 0x0D07 }, /* R21 - Clock Rates 1 */
55 { 22, 0x0000 }, /* R22 - Clock Rates 2 */
56 { 24, 0x0050 }, /* R24 - Audio Interface 0 */
57 { 25, 0x0242 }, /* R25 - Audio Interface 1 */
58 { 26, 0x0008 }, /* R26 - Audio Interface 2 */
59 { 27, 0x0022 }, /* R27 - Audio Interface 3 */
60 { 30, 0x00C0 }, /* R30 - DAC Digital Volume Left */
61 { 31, 0x00C0 }, /* R31 - DAC Digital Volume Right */
62 { 32, 0x0000 }, /* R32 - DAC Digital 0 */
63 { 33, 0x0000 }, /* R33 - DAC Digital 1 */
64 { 36, 0x00C0 }, /* R36 - ADC Digital Volume Left */
65 { 37, 0x00C0 }, /* R37 - ADC Digital Volume Right */
66 { 38, 0x0000 }, /* R38 - ADC Digital 0 */
67 { 39, 0x0073 }, /* R39 - Digital Microphone 0 */
68 { 40, 0x09BF }, /* R40 - DRC 0 */
69 { 41, 0x3241 }, /* R41 - DRC 1 */
70 { 42, 0x0020 }, /* R42 - DRC 2 */
71 { 43, 0x0000 }, /* R43 - DRC 3 */
72 { 44, 0x0085 }, /* R44 - Analogue Left Input 0 */
73 { 45, 0x0085 }, /* R45 - Analogue Right Input 0 */
74 { 46, 0x0044 }, /* R46 - Analogue Left Input 1 */
75 { 47, 0x0044 }, /* R47 - Analogue Right Input 1 */
76 { 50, 0x0008 }, /* R50 - Analogue Left Mix 0 */
77 { 51, 0x0004 }, /* R51 - Analogue Right Mix 0 */
78 { 52, 0x0000 }, /* R52 - Analogue Spk Mix Left 0 */
79 { 53, 0x0000 }, /* R53 - Analogue Spk Mix Left 1 */
80 { 54, 0x0000 }, /* R54 - Analogue Spk Mix Right 0 */
81 { 55, 0x0000 }, /* R55 - Analogue Spk Mix Right 1 */
82 { 57, 0x002D }, /* R57 - Analogue OUT1 Left */
83 { 58, 0x002D }, /* R58 - Analogue OUT1 Right */
84 { 59, 0x0039 }, /* R59 - Analogue OUT2 Left */
85 { 60, 0x0039 }, /* R60 - Analogue OUT2 Right */
86 { 62, 0x0139 }, /* R62 - Analogue OUT3 Left */
87 { 63, 0x0139 }, /* R63 - Analogue OUT3 Right */
88 { 64, 0x0000 }, /* R65 - Analogue SPK Output Control 0 */
89 { 67, 0x0010 }, /* R67 - DC Servo 0 */
90 { 69, 0x00A4 }, /* R69 - DC Servo 2 */
91 { 90, 0x0000 }, /* R90 - Analogue HP 0 */
92 { 94, 0x0000 }, /* R94 - Analogue Lineout 0 */
93 { 98, 0x0000 }, /* R98 - Charge Pump 0 */
94 { 104, 0x0000 }, /* R104 - Class W 0 */
95 { 108, 0x0000 }, /* R108 - Write Sequencer 0 */
96 { 109, 0x0000 }, /* R109 - Write Sequencer 1 */
97 { 110, 0x0000 }, /* R110 - Write Sequencer 2 */
98 { 111, 0x0000 }, /* R111 - Write Sequencer 3 */
99 { 112, 0x0000 }, /* R112 - Write Sequencer 4 */
100 { 114, 0x0000 }, /* R114 - Control Interface */
101 { 116, 0x00A8 }, /* R116 - GPIO Control 1 */
102 { 117, 0x00A8 }, /* R117 - GPIO Control 2 */
103 { 118, 0x00A8 }, /* R118 - GPIO Control 3 */
104 { 119, 0x0220 }, /* R119 - GPIO Control 4 */
105 { 120, 0x01A0 }, /* R120 - GPIO Control 5 */
106 { 122, 0xFFFF }, /* R122 - Interrupt Status 1 Mask */
107 { 123, 0x0000 }, /* R123 - Interrupt Polarity 1 */
108 { 126, 0x0000 }, /* R126 - Interrupt Control */
109 { 129, 0x0000 }, /* R129 - Control Interface Test 1 */
110 { 149, 0x6810 }, /* R149 - Charge Pump Test 1 */
111 { 164, 0x0028 }, /* R164 - Clock Rate Test 4 */
112 { 172, 0x0000 }, /* R172 - Analogue Output Bias 0 */
113 };
114
115 #define WM8903_NUM_SUPPLIES 4
116 static const char *wm8903_supply_names[WM8903_NUM_SUPPLIES] = {
117 "AVDD",
118 "CPVDD",
119 "DBVDD",
120 "DCVDD",
121 };
122
123 struct wm8903_priv {
124 struct wm8903_platform_data *pdata;
125 struct device *dev;
126 struct regmap *regmap;
127 struct regulator_bulk_data supplies[WM8903_NUM_SUPPLIES];
128
129 int sysclk;
130 int irq;
131
132 struct mutex lock;
133 int fs;
134 int deemph;
135
136 int dcs_pending;
137 int dcs_cache[4];
138
139 /* Reference count */
140 int class_w_users;
141
142 struct snd_soc_jack *mic_jack;
143 int mic_det;
144 int mic_short;
145 int mic_last_report;
146 int mic_delay;
147
148 #ifdef CONFIG_GPIOLIB
149 struct gpio_chip gpio_chip;
150 #endif
151 };
152
wm8903_readable_register(struct device * dev,unsigned int reg)153 static bool wm8903_readable_register(struct device *dev, unsigned int reg)
154 {
155 switch (reg) {
156 case WM8903_SW_RESET_AND_ID:
157 case WM8903_REVISION_NUMBER:
158 case WM8903_BIAS_CONTROL_0:
159 case WM8903_VMID_CONTROL_0:
160 case WM8903_MIC_BIAS_CONTROL_0:
161 case WM8903_ANALOGUE_DAC_0:
162 case WM8903_ANALOGUE_ADC_0:
163 case WM8903_POWER_MANAGEMENT_0:
164 case WM8903_POWER_MANAGEMENT_1:
165 case WM8903_POWER_MANAGEMENT_2:
166 case WM8903_POWER_MANAGEMENT_3:
167 case WM8903_POWER_MANAGEMENT_4:
168 case WM8903_POWER_MANAGEMENT_5:
169 case WM8903_POWER_MANAGEMENT_6:
170 case WM8903_CLOCK_RATES_0:
171 case WM8903_CLOCK_RATES_1:
172 case WM8903_CLOCK_RATES_2:
173 case WM8903_AUDIO_INTERFACE_0:
174 case WM8903_AUDIO_INTERFACE_1:
175 case WM8903_AUDIO_INTERFACE_2:
176 case WM8903_AUDIO_INTERFACE_3:
177 case WM8903_DAC_DIGITAL_VOLUME_LEFT:
178 case WM8903_DAC_DIGITAL_VOLUME_RIGHT:
179 case WM8903_DAC_DIGITAL_0:
180 case WM8903_DAC_DIGITAL_1:
181 case WM8903_ADC_DIGITAL_VOLUME_LEFT:
182 case WM8903_ADC_DIGITAL_VOLUME_RIGHT:
183 case WM8903_ADC_DIGITAL_0:
184 case WM8903_DIGITAL_MICROPHONE_0:
185 case WM8903_DRC_0:
186 case WM8903_DRC_1:
187 case WM8903_DRC_2:
188 case WM8903_DRC_3:
189 case WM8903_ANALOGUE_LEFT_INPUT_0:
190 case WM8903_ANALOGUE_RIGHT_INPUT_0:
191 case WM8903_ANALOGUE_LEFT_INPUT_1:
192 case WM8903_ANALOGUE_RIGHT_INPUT_1:
193 case WM8903_ANALOGUE_LEFT_MIX_0:
194 case WM8903_ANALOGUE_RIGHT_MIX_0:
195 case WM8903_ANALOGUE_SPK_MIX_LEFT_0:
196 case WM8903_ANALOGUE_SPK_MIX_LEFT_1:
197 case WM8903_ANALOGUE_SPK_MIX_RIGHT_0:
198 case WM8903_ANALOGUE_SPK_MIX_RIGHT_1:
199 case WM8903_ANALOGUE_OUT1_LEFT:
200 case WM8903_ANALOGUE_OUT1_RIGHT:
201 case WM8903_ANALOGUE_OUT2_LEFT:
202 case WM8903_ANALOGUE_OUT2_RIGHT:
203 case WM8903_ANALOGUE_OUT3_LEFT:
204 case WM8903_ANALOGUE_OUT3_RIGHT:
205 case WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0:
206 case WM8903_DC_SERVO_0:
207 case WM8903_DC_SERVO_2:
208 case WM8903_DC_SERVO_READBACK_1:
209 case WM8903_DC_SERVO_READBACK_2:
210 case WM8903_DC_SERVO_READBACK_3:
211 case WM8903_DC_SERVO_READBACK_4:
212 case WM8903_ANALOGUE_HP_0:
213 case WM8903_ANALOGUE_LINEOUT_0:
214 case WM8903_CHARGE_PUMP_0:
215 case WM8903_CLASS_W_0:
216 case WM8903_WRITE_SEQUENCER_0:
217 case WM8903_WRITE_SEQUENCER_1:
218 case WM8903_WRITE_SEQUENCER_2:
219 case WM8903_WRITE_SEQUENCER_3:
220 case WM8903_WRITE_SEQUENCER_4:
221 case WM8903_CONTROL_INTERFACE:
222 case WM8903_GPIO_CONTROL_1:
223 case WM8903_GPIO_CONTROL_2:
224 case WM8903_GPIO_CONTROL_3:
225 case WM8903_GPIO_CONTROL_4:
226 case WM8903_GPIO_CONTROL_5:
227 case WM8903_INTERRUPT_STATUS_1:
228 case WM8903_INTERRUPT_STATUS_1_MASK:
229 case WM8903_INTERRUPT_POLARITY_1:
230 case WM8903_INTERRUPT_CONTROL:
231 case WM8903_CLOCK_RATE_TEST_4:
232 case WM8903_ANALOGUE_OUTPUT_BIAS_0:
233 return true;
234 default:
235 return false;
236 }
237 }
238
wm8903_volatile_register(struct device * dev,unsigned int reg)239 static bool wm8903_volatile_register(struct device *dev, unsigned int reg)
240 {
241 switch (reg) {
242 case WM8903_SW_RESET_AND_ID:
243 case WM8903_REVISION_NUMBER:
244 case WM8903_INTERRUPT_STATUS_1:
245 case WM8903_WRITE_SEQUENCER_4:
246 case WM8903_DC_SERVO_READBACK_1:
247 case WM8903_DC_SERVO_READBACK_2:
248 case WM8903_DC_SERVO_READBACK_3:
249 case WM8903_DC_SERVO_READBACK_4:
250 return true;
251
252 default:
253 return false;
254 }
255 }
256
wm8903_cp_event(struct snd_soc_dapm_widget * w,struct snd_kcontrol * kcontrol,int event)257 static int wm8903_cp_event(struct snd_soc_dapm_widget *w,
258 struct snd_kcontrol *kcontrol, int event)
259 {
260 WARN_ON(event != SND_SOC_DAPM_POST_PMU);
261 mdelay(4);
262
263 return 0;
264 }
265
wm8903_dcs_event(struct snd_soc_dapm_widget * w,struct snd_kcontrol * kcontrol,int event)266 static int wm8903_dcs_event(struct snd_soc_dapm_widget *w,
267 struct snd_kcontrol *kcontrol, int event)
268 {
269 struct snd_soc_component *component = snd_soc_dapm_to_component(w->dapm);
270 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
271
272 switch (event) {
273 case SND_SOC_DAPM_POST_PMU:
274 wm8903->dcs_pending |= 1 << w->shift;
275 break;
276 case SND_SOC_DAPM_PRE_PMD:
277 snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
278 1 << w->shift, 0);
279 break;
280 }
281
282 return 0;
283 }
284
285 #define WM8903_DCS_MODE_WRITE_STOP 0
286 #define WM8903_DCS_MODE_START_STOP 2
287
wm8903_seq_notifier(struct snd_soc_component * component,enum snd_soc_dapm_type event,int subseq)288 static void wm8903_seq_notifier(struct snd_soc_component *component,
289 enum snd_soc_dapm_type event, int subseq)
290 {
291 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
292 int dcs_mode = WM8903_DCS_MODE_WRITE_STOP;
293 int i, val;
294
295 /* Complete any pending DC servo starts */
296 if (wm8903->dcs_pending) {
297 dev_dbg(component->dev, "Starting DC servo for %x\n",
298 wm8903->dcs_pending);
299
300 /* If we've no cached values then we need to do startup */
301 for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) {
302 if (!(wm8903->dcs_pending & (1 << i)))
303 continue;
304
305 if (wm8903->dcs_cache[i]) {
306 dev_dbg(component->dev,
307 "Restore DC servo %d value %x\n",
308 3 - i, wm8903->dcs_cache[i]);
309
310 snd_soc_component_write(component, WM8903_DC_SERVO_4 + i,
311 wm8903->dcs_cache[i] & 0xff);
312 } else {
313 dev_dbg(component->dev,
314 "Calibrate DC servo %d\n", 3 - i);
315 dcs_mode = WM8903_DCS_MODE_START_STOP;
316 }
317 }
318
319 /* Don't trust the cache for analogue */
320 if (wm8903->class_w_users)
321 dcs_mode = WM8903_DCS_MODE_START_STOP;
322
323 snd_soc_component_update_bits(component, WM8903_DC_SERVO_2,
324 WM8903_DCS_MODE_MASK, dcs_mode);
325
326 snd_soc_component_update_bits(component, WM8903_DC_SERVO_0,
327 WM8903_DCS_ENA_MASK, wm8903->dcs_pending);
328
329 switch (dcs_mode) {
330 case WM8903_DCS_MODE_WRITE_STOP:
331 break;
332
333 case WM8903_DCS_MODE_START_STOP:
334 msleep(270);
335
336 /* Cache the measured offsets for digital */
337 if (wm8903->class_w_users)
338 break;
339
340 for (i = 0; i < ARRAY_SIZE(wm8903->dcs_cache); i++) {
341 if (!(wm8903->dcs_pending & (1 << i)))
342 continue;
343
344 val = snd_soc_component_read(component,
345 WM8903_DC_SERVO_READBACK_1 + i);
346 dev_dbg(component->dev, "DC servo %d: %x\n",
347 3 - i, val);
348 wm8903->dcs_cache[i] = val;
349 }
350 break;
351
352 default:
353 pr_warn("DCS mode %d delay not set\n", dcs_mode);
354 break;
355 }
356
357 wm8903->dcs_pending = 0;
358 }
359 }
360
361 /*
362 * When used with DAC outputs only the WM8903 charge pump supports
363 * operation in class W mode, providing very low power consumption
364 * when used with digital sources. Enable and disable this mode
365 * automatically depending on the mixer configuration.
366 *
367 * All the relevant controls are simple switches.
368 */
wm8903_class_w_put(struct snd_kcontrol * kcontrol,struct snd_ctl_elem_value * ucontrol)369 static int wm8903_class_w_put(struct snd_kcontrol *kcontrol,
370 struct snd_ctl_elem_value *ucontrol)
371 {
372 struct snd_soc_component *component = snd_soc_dapm_kcontrol_component(kcontrol);
373 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
374 u16 reg;
375 int ret;
376
377 reg = snd_soc_component_read(component, WM8903_CLASS_W_0);
378
379 /* Turn it off if we're about to enable bypass */
380 if (ucontrol->value.integer.value[0]) {
381 if (wm8903->class_w_users == 0) {
382 dev_dbg(component->dev, "Disabling Class W\n");
383 snd_soc_component_write(component, WM8903_CLASS_W_0, reg &
384 ~(WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V));
385 }
386 wm8903->class_w_users++;
387 }
388
389 /* Implement the change */
390 ret = snd_soc_dapm_put_volsw(kcontrol, ucontrol);
391
392 /* If we've just disabled the last bypass path turn Class W on */
393 if (!ucontrol->value.integer.value[0]) {
394 if (wm8903->class_w_users == 1) {
395 dev_dbg(component->dev, "Enabling Class W\n");
396 snd_soc_component_write(component, WM8903_CLASS_W_0, reg |
397 WM8903_CP_DYN_FREQ | WM8903_CP_DYN_V);
398 }
399 wm8903->class_w_users--;
400 }
401
402 dev_dbg(component->dev, "Bypass use count now %d\n",
403 wm8903->class_w_users);
404
405 return ret;
406 }
407
408 #define SOC_DAPM_SINGLE_W(xname, reg, shift, max, invert) \
409 SOC_SINGLE_EXT(xname, reg, shift, max, invert, \
410 snd_soc_dapm_get_volsw, wm8903_class_w_put)
411
412
413 static int wm8903_deemph[] = { 0, 32000, 44100, 48000 };
414
wm8903_set_deemph(struct snd_soc_component * component)415 static int wm8903_set_deemph(struct snd_soc_component *component)
416 {
417 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
418 int val, i, best;
419
420 /* If we're using deemphasis select the nearest available sample
421 * rate.
422 */
423 if (wm8903->deemph) {
424 best = 1;
425 for (i = 2; i < ARRAY_SIZE(wm8903_deemph); i++) {
426 if (abs(wm8903_deemph[i] - wm8903->fs) <
427 abs(wm8903_deemph[best] - wm8903->fs))
428 best = i;
429 }
430
431 val = best << WM8903_DEEMPH_SHIFT;
432 } else {
433 best = 0;
434 val = 0;
435 }
436
437 dev_dbg(component->dev, "Set deemphasis %d (%dHz)\n",
438 best, wm8903_deemph[best]);
439
440 return snd_soc_component_update_bits(component, WM8903_DAC_DIGITAL_1,
441 WM8903_DEEMPH_MASK, val);
442 }
443
wm8903_get_deemph(struct snd_kcontrol * kcontrol,struct snd_ctl_elem_value * ucontrol)444 static int wm8903_get_deemph(struct snd_kcontrol *kcontrol,
445 struct snd_ctl_elem_value *ucontrol)
446 {
447 struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
448 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
449
450 ucontrol->value.integer.value[0] = wm8903->deemph;
451
452 return 0;
453 }
454
wm8903_put_deemph(struct snd_kcontrol * kcontrol,struct snd_ctl_elem_value * ucontrol)455 static int wm8903_put_deemph(struct snd_kcontrol *kcontrol,
456 struct snd_ctl_elem_value *ucontrol)
457 {
458 struct snd_soc_component *component = snd_soc_kcontrol_component(kcontrol);
459 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
460 unsigned int deemph = ucontrol->value.integer.value[0];
461 int ret = 0;
462
463 if (deemph > 1)
464 return -EINVAL;
465
466 mutex_lock(&wm8903->lock);
467 if (wm8903->deemph != deemph) {
468 wm8903->deemph = deemph;
469
470 wm8903_set_deemph(component);
471
472 ret = 1;
473 }
474 mutex_unlock(&wm8903->lock);
475
476 return ret;
477 }
478
479 /* ALSA can only do steps of .01dB */
480 static const DECLARE_TLV_DB_SCALE(digital_tlv, -7200, 75, 1);
481
482 static const DECLARE_TLV_DB_SCALE(dac_boost_tlv, 0, 600, 0);
483
484 static const DECLARE_TLV_DB_SCALE(digital_sidetone_tlv, -3600, 300, 0);
485 static const DECLARE_TLV_DB_SCALE(out_tlv, -5700, 100, 0);
486
487 static const DECLARE_TLV_DB_SCALE(drc_tlv_thresh, 0, 75, 0);
488 static const DECLARE_TLV_DB_SCALE(drc_tlv_amp, -2250, 75, 0);
489 static const DECLARE_TLV_DB_SCALE(drc_tlv_min, 0, 600, 0);
490 static const DECLARE_TLV_DB_SCALE(drc_tlv_max, 1200, 600, 0);
491 static const DECLARE_TLV_DB_SCALE(drc_tlv_startup, -300, 50, 0);
492
493 static const char *hpf_mode_text[] = {
494 "Hi-fi", "Voice 1", "Voice 2", "Voice 3"
495 };
496
497 static SOC_ENUM_SINGLE_DECL(hpf_mode,
498 WM8903_ADC_DIGITAL_0, 5, hpf_mode_text);
499
500 static const char *osr_text[] = {
501 "Low power", "High performance"
502 };
503
504 static SOC_ENUM_SINGLE_DECL(adc_osr,
505 WM8903_ANALOGUE_ADC_0, 0, osr_text);
506
507 static SOC_ENUM_SINGLE_DECL(dac_osr,
508 WM8903_DAC_DIGITAL_1, 0, osr_text);
509
510 static const char *drc_slope_text[] = {
511 "1", "1/2", "1/4", "1/8", "1/16", "0"
512 };
513
514 static SOC_ENUM_SINGLE_DECL(drc_slope_r0,
515 WM8903_DRC_2, 3, drc_slope_text);
516
517 static SOC_ENUM_SINGLE_DECL(drc_slope_r1,
518 WM8903_DRC_2, 0, drc_slope_text);
519
520 static const char *drc_attack_text[] = {
521 "instantaneous",
522 "363us", "762us", "1.45ms", "2.9ms", "5.8ms", "11.6ms", "23.2ms",
523 "46.4ms", "92.8ms", "185.6ms"
524 };
525
526 static SOC_ENUM_SINGLE_DECL(drc_attack,
527 WM8903_DRC_1, 12, drc_attack_text);
528
529 static const char *drc_decay_text[] = {
530 "186ms", "372ms", "743ms", "1.49s", "2.97s", "5.94s", "11.89s",
531 "23.87s", "47.56s"
532 };
533
534 static SOC_ENUM_SINGLE_DECL(drc_decay,
535 WM8903_DRC_1, 8, drc_decay_text);
536
537 static const char *drc_ff_delay_text[] = {
538 "5 samples", "9 samples"
539 };
540
541 static SOC_ENUM_SINGLE_DECL(drc_ff_delay,
542 WM8903_DRC_0, 5, drc_ff_delay_text);
543
544 static const char *drc_qr_decay_text[] = {
545 "0.725ms", "1.45ms", "5.8ms"
546 };
547
548 static SOC_ENUM_SINGLE_DECL(drc_qr_decay,
549 WM8903_DRC_1, 4, drc_qr_decay_text);
550
551 static const char *drc_smoothing_text[] = {
552 "Low", "Medium", "High"
553 };
554
555 static SOC_ENUM_SINGLE_DECL(drc_smoothing,
556 WM8903_DRC_0, 11, drc_smoothing_text);
557
558 static const char *soft_mute_text[] = {
559 "Fast (fs/2)", "Slow (fs/32)"
560 };
561
562 static SOC_ENUM_SINGLE_DECL(soft_mute,
563 WM8903_DAC_DIGITAL_1, 10, soft_mute_text);
564
565 static const char *mute_mode_text[] = {
566 "Hard", "Soft"
567 };
568
569 static SOC_ENUM_SINGLE_DECL(mute_mode,
570 WM8903_DAC_DIGITAL_1, 9, mute_mode_text);
571
572 static const char *companding_text[] = {
573 "ulaw", "alaw"
574 };
575
576 static SOC_ENUM_SINGLE_DECL(dac_companding,
577 WM8903_AUDIO_INTERFACE_0, 0, companding_text);
578
579 static SOC_ENUM_SINGLE_DECL(adc_companding,
580 WM8903_AUDIO_INTERFACE_0, 2, companding_text);
581
582 static const char *input_mode_text[] = {
583 "Single-Ended", "Differential Line", "Differential Mic"
584 };
585
586 static SOC_ENUM_SINGLE_DECL(linput_mode_enum,
587 WM8903_ANALOGUE_LEFT_INPUT_1, 0, input_mode_text);
588
589 static SOC_ENUM_SINGLE_DECL(rinput_mode_enum,
590 WM8903_ANALOGUE_RIGHT_INPUT_1, 0, input_mode_text);
591
592 static const char *linput_mux_text[] = {
593 "IN1L", "IN2L", "IN3L"
594 };
595
596 static SOC_ENUM_SINGLE_DECL(linput_enum,
597 WM8903_ANALOGUE_LEFT_INPUT_1, 2, linput_mux_text);
598
599 static SOC_ENUM_SINGLE_DECL(linput_inv_enum,
600 WM8903_ANALOGUE_LEFT_INPUT_1, 4, linput_mux_text);
601
602 static const char *rinput_mux_text[] = {
603 "IN1R", "IN2R", "IN3R"
604 };
605
606 static SOC_ENUM_SINGLE_DECL(rinput_enum,
607 WM8903_ANALOGUE_RIGHT_INPUT_1, 2, rinput_mux_text);
608
609 static SOC_ENUM_SINGLE_DECL(rinput_inv_enum,
610 WM8903_ANALOGUE_RIGHT_INPUT_1, 4, rinput_mux_text);
611
612
613 static const char *sidetone_text[] = {
614 "None", "Left", "Right"
615 };
616
617 static SOC_ENUM_SINGLE_DECL(lsidetone_enum,
618 WM8903_DAC_DIGITAL_0, 2, sidetone_text);
619
620 static SOC_ENUM_SINGLE_DECL(rsidetone_enum,
621 WM8903_DAC_DIGITAL_0, 0, sidetone_text);
622
623 static const char *adcinput_text[] = {
624 "ADC", "DMIC"
625 };
626
627 static SOC_ENUM_SINGLE_DECL(adcinput_enum,
628 WM8903_CLOCK_RATE_TEST_4, 9, adcinput_text);
629
630 static const char *aif_text[] = {
631 "Left", "Right"
632 };
633
634 static SOC_ENUM_SINGLE_DECL(lcapture_enum,
635 WM8903_AUDIO_INTERFACE_0, 7, aif_text);
636
637 static SOC_ENUM_SINGLE_DECL(rcapture_enum,
638 WM8903_AUDIO_INTERFACE_0, 6, aif_text);
639
640 static SOC_ENUM_SINGLE_DECL(lplay_enum,
641 WM8903_AUDIO_INTERFACE_0, 5, aif_text);
642
643 static SOC_ENUM_SINGLE_DECL(rplay_enum,
644 WM8903_AUDIO_INTERFACE_0, 4, aif_text);
645
646 static const struct snd_kcontrol_new wm8903_snd_controls[] = {
647
648 /* Input PGAs - No TLV since the scale depends on PGA mode */
649 SOC_SINGLE("Left Input PGA Switch", WM8903_ANALOGUE_LEFT_INPUT_0,
650 7, 1, 1),
651 SOC_SINGLE("Left Input PGA Volume", WM8903_ANALOGUE_LEFT_INPUT_0,
652 0, 31, 0),
653 SOC_SINGLE("Left Input PGA Common Mode Switch", WM8903_ANALOGUE_LEFT_INPUT_1,
654 6, 1, 0),
655
656 SOC_SINGLE("Right Input PGA Switch", WM8903_ANALOGUE_RIGHT_INPUT_0,
657 7, 1, 1),
658 SOC_SINGLE("Right Input PGA Volume", WM8903_ANALOGUE_RIGHT_INPUT_0,
659 0, 31, 0),
660 SOC_SINGLE("Right Input PGA Common Mode Switch", WM8903_ANALOGUE_RIGHT_INPUT_1,
661 6, 1, 0),
662
663 /* ADCs */
664 SOC_ENUM("ADC OSR", adc_osr),
665 SOC_SINGLE("HPF Switch", WM8903_ADC_DIGITAL_0, 4, 1, 0),
666 SOC_ENUM("HPF Mode", hpf_mode),
667 SOC_SINGLE("DRC Switch", WM8903_DRC_0, 15, 1, 0),
668 SOC_ENUM("DRC Compressor Slope R0", drc_slope_r0),
669 SOC_ENUM("DRC Compressor Slope R1", drc_slope_r1),
670 SOC_SINGLE_TLV("DRC Compressor Threshold Volume", WM8903_DRC_3, 5, 124, 1,
671 drc_tlv_thresh),
672 SOC_SINGLE_TLV("DRC Volume", WM8903_DRC_3, 0, 30, 1, drc_tlv_amp),
673 SOC_SINGLE_TLV("DRC Minimum Gain Volume", WM8903_DRC_1, 2, 3, 1, drc_tlv_min),
674 SOC_SINGLE_TLV("DRC Maximum Gain Volume", WM8903_DRC_1, 0, 3, 0, drc_tlv_max),
675 SOC_ENUM("DRC Attack Rate", drc_attack),
676 SOC_ENUM("DRC Decay Rate", drc_decay),
677 SOC_ENUM("DRC FF Delay", drc_ff_delay),
678 SOC_SINGLE("DRC Anticlip Switch", WM8903_DRC_0, 1, 1, 0),
679 SOC_SINGLE("DRC QR Switch", WM8903_DRC_0, 2, 1, 0),
680 SOC_SINGLE_TLV("DRC QR Threshold Volume", WM8903_DRC_0, 6, 3, 0, drc_tlv_max),
681 SOC_ENUM("DRC QR Decay Rate", drc_qr_decay),
682 SOC_SINGLE("DRC Smoothing Switch", WM8903_DRC_0, 3, 1, 0),
683 SOC_SINGLE("DRC Smoothing Hysteresis Switch", WM8903_DRC_0, 0, 1, 0),
684 SOC_ENUM("DRC Smoothing Threshold", drc_smoothing),
685 SOC_SINGLE_TLV("DRC Startup Volume", WM8903_DRC_0, 6, 18, 0, drc_tlv_startup),
686
687 SOC_DOUBLE_R_TLV("Digital Capture Volume", WM8903_ADC_DIGITAL_VOLUME_LEFT,
688 WM8903_ADC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
689 SOC_ENUM("ADC Companding Mode", adc_companding),
690 SOC_SINGLE("ADC Companding Switch", WM8903_AUDIO_INTERFACE_0, 3, 1, 0),
691
692 SOC_DOUBLE_TLV("Digital Sidetone Volume", WM8903_DAC_DIGITAL_0, 4, 8,
693 12, 0, digital_sidetone_tlv),
694
695 /* DAC */
696 SOC_ENUM("DAC OSR", dac_osr),
697 SOC_DOUBLE_R_TLV("Digital Playback Volume", WM8903_DAC_DIGITAL_VOLUME_LEFT,
698 WM8903_DAC_DIGITAL_VOLUME_RIGHT, 1, 120, 0, digital_tlv),
699 SOC_ENUM("DAC Soft Mute Rate", soft_mute),
700 SOC_ENUM("DAC Mute Mode", mute_mode),
701 SOC_SINGLE("DAC Mono Switch", WM8903_DAC_DIGITAL_1, 12, 1, 0),
702 SOC_ENUM("DAC Companding Mode", dac_companding),
703 SOC_SINGLE("DAC Companding Switch", WM8903_AUDIO_INTERFACE_0, 1, 1, 0),
704 SOC_SINGLE_TLV("DAC Boost Volume", WM8903_AUDIO_INTERFACE_0, 9, 3, 0,
705 dac_boost_tlv),
706 SOC_SINGLE_BOOL_EXT("Playback Deemphasis Switch", 0,
707 wm8903_get_deemph, wm8903_put_deemph),
708
709 /* Headphones */
710 SOC_DOUBLE_R("Headphone Switch",
711 WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
712 8, 1, 1),
713 SOC_DOUBLE_R("Headphone ZC Switch",
714 WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
715 6, 1, 0),
716 SOC_DOUBLE_R_TLV("Headphone Volume",
717 WM8903_ANALOGUE_OUT1_LEFT, WM8903_ANALOGUE_OUT1_RIGHT,
718 0, 63, 0, out_tlv),
719
720 /* Line out */
721 SOC_DOUBLE_R("Line Out Switch",
722 WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
723 8, 1, 1),
724 SOC_DOUBLE_R("Line Out ZC Switch",
725 WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
726 6, 1, 0),
727 SOC_DOUBLE_R_TLV("Line Out Volume",
728 WM8903_ANALOGUE_OUT2_LEFT, WM8903_ANALOGUE_OUT2_RIGHT,
729 0, 63, 0, out_tlv),
730
731 /* Speaker */
732 SOC_DOUBLE_R("Speaker Switch",
733 WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 8, 1, 1),
734 SOC_DOUBLE_R("Speaker ZC Switch",
735 WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT, 6, 1, 0),
736 SOC_DOUBLE_R_TLV("Speaker Volume",
737 WM8903_ANALOGUE_OUT3_LEFT, WM8903_ANALOGUE_OUT3_RIGHT,
738 0, 63, 0, out_tlv),
739 };
740
741 static const struct snd_kcontrol_new linput_mode_mux =
742 SOC_DAPM_ENUM("Left Input Mode Mux", linput_mode_enum);
743
744 static const struct snd_kcontrol_new rinput_mode_mux =
745 SOC_DAPM_ENUM("Right Input Mode Mux", rinput_mode_enum);
746
747 static const struct snd_kcontrol_new linput_mux =
748 SOC_DAPM_ENUM("Left Input Mux", linput_enum);
749
750 static const struct snd_kcontrol_new linput_inv_mux =
751 SOC_DAPM_ENUM("Left Inverting Input Mux", linput_inv_enum);
752
753 static const struct snd_kcontrol_new rinput_mux =
754 SOC_DAPM_ENUM("Right Input Mux", rinput_enum);
755
756 static const struct snd_kcontrol_new rinput_inv_mux =
757 SOC_DAPM_ENUM("Right Inverting Input Mux", rinput_inv_enum);
758
759 static const struct snd_kcontrol_new lsidetone_mux =
760 SOC_DAPM_ENUM("DACL Sidetone Mux", lsidetone_enum);
761
762 static const struct snd_kcontrol_new rsidetone_mux =
763 SOC_DAPM_ENUM("DACR Sidetone Mux", rsidetone_enum);
764
765 static const struct snd_kcontrol_new adcinput_mux =
766 SOC_DAPM_ENUM("ADC Input", adcinput_enum);
767
768 static const struct snd_kcontrol_new lcapture_mux =
769 SOC_DAPM_ENUM("Left Capture Mux", lcapture_enum);
770
771 static const struct snd_kcontrol_new rcapture_mux =
772 SOC_DAPM_ENUM("Right Capture Mux", rcapture_enum);
773
774 static const struct snd_kcontrol_new lplay_mux =
775 SOC_DAPM_ENUM("Left Playback Mux", lplay_enum);
776
777 static const struct snd_kcontrol_new rplay_mux =
778 SOC_DAPM_ENUM("Right Playback Mux", rplay_enum);
779
780 static const struct snd_kcontrol_new left_output_mixer[] = {
781 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_LEFT_MIX_0, 3, 1, 0),
782 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_LEFT_MIX_0, 2, 1, 0),
783 SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 1, 1, 0),
784 SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_LEFT_MIX_0, 0, 1, 0),
785 };
786
787 static const struct snd_kcontrol_new right_output_mixer[] = {
788 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 3, 1, 0),
789 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 2, 1, 0),
790 SOC_DAPM_SINGLE_W("Left Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 1, 1, 0),
791 SOC_DAPM_SINGLE_W("Right Bypass Switch", WM8903_ANALOGUE_RIGHT_MIX_0, 0, 1, 0),
792 };
793
794 static const struct snd_kcontrol_new left_speaker_mixer[] = {
795 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 3, 1, 0),
796 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 2, 1, 0),
797 SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0, 1, 1, 0),
798 SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_LEFT_0,
799 0, 1, 0),
800 };
801
802 static const struct snd_kcontrol_new right_speaker_mixer[] = {
803 SOC_DAPM_SINGLE("DACL Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 3, 1, 0),
804 SOC_DAPM_SINGLE("DACR Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0, 2, 1, 0),
805 SOC_DAPM_SINGLE("Left Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
806 1, 1, 0),
807 SOC_DAPM_SINGLE("Right Bypass Switch", WM8903_ANALOGUE_SPK_MIX_RIGHT_0,
808 0, 1, 0),
809 };
810
811 static const struct snd_soc_dapm_widget wm8903_dapm_widgets[] = {
812 SND_SOC_DAPM_INPUT("IN1L"),
813 SND_SOC_DAPM_INPUT("IN1R"),
814 SND_SOC_DAPM_INPUT("IN2L"),
815 SND_SOC_DAPM_INPUT("IN2R"),
816 SND_SOC_DAPM_INPUT("IN3L"),
817 SND_SOC_DAPM_INPUT("IN3R"),
818 SND_SOC_DAPM_INPUT("DMICDAT"),
819
820 SND_SOC_DAPM_OUTPUT("HPOUTL"),
821 SND_SOC_DAPM_OUTPUT("HPOUTR"),
822 SND_SOC_DAPM_OUTPUT("LINEOUTL"),
823 SND_SOC_DAPM_OUTPUT("LINEOUTR"),
824 SND_SOC_DAPM_OUTPUT("LOP"),
825 SND_SOC_DAPM_OUTPUT("LON"),
826 SND_SOC_DAPM_OUTPUT("ROP"),
827 SND_SOC_DAPM_OUTPUT("RON"),
828
829 SND_SOC_DAPM_SUPPLY("MICBIAS", WM8903_MIC_BIAS_CONTROL_0, 0, 0, NULL, 0),
830
831 SND_SOC_DAPM_MUX("Left Input Mux", SND_SOC_NOPM, 0, 0, &linput_mux),
832 SND_SOC_DAPM_MUX("Left Input Inverting Mux", SND_SOC_NOPM, 0, 0,
833 &linput_inv_mux),
834 SND_SOC_DAPM_MUX("Left Input Mode Mux", SND_SOC_NOPM, 0, 0, &linput_mode_mux),
835
836 SND_SOC_DAPM_MUX("Right Input Mux", SND_SOC_NOPM, 0, 0, &rinput_mux),
837 SND_SOC_DAPM_MUX("Right Input Inverting Mux", SND_SOC_NOPM, 0, 0,
838 &rinput_inv_mux),
839 SND_SOC_DAPM_MUX("Right Input Mode Mux", SND_SOC_NOPM, 0, 0, &rinput_mode_mux),
840
841 SND_SOC_DAPM_PGA("Left Input PGA", WM8903_POWER_MANAGEMENT_0, 1, 0, NULL, 0),
842 SND_SOC_DAPM_PGA("Right Input PGA", WM8903_POWER_MANAGEMENT_0, 0, 0, NULL, 0),
843
844 SND_SOC_DAPM_MUX("Left ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
845 SND_SOC_DAPM_MUX("Right ADC Input", SND_SOC_NOPM, 0, 0, &adcinput_mux),
846
847 SND_SOC_DAPM_ADC("ADCL", NULL, WM8903_POWER_MANAGEMENT_6, 1, 0),
848 SND_SOC_DAPM_ADC("ADCR", NULL, WM8903_POWER_MANAGEMENT_6, 0, 0),
849
850 SND_SOC_DAPM_MUX("Left Capture Mux", SND_SOC_NOPM, 0, 0, &lcapture_mux),
851 SND_SOC_DAPM_MUX("Right Capture Mux", SND_SOC_NOPM, 0, 0, &rcapture_mux),
852
853 SND_SOC_DAPM_AIF_OUT("AIFTXL", "Left HiFi Capture", 0, SND_SOC_NOPM, 0, 0),
854 SND_SOC_DAPM_AIF_OUT("AIFTXR", "Right HiFi Capture", 0, SND_SOC_NOPM, 0, 0),
855
856 SND_SOC_DAPM_MUX("DACL Sidetone", SND_SOC_NOPM, 0, 0, &lsidetone_mux),
857 SND_SOC_DAPM_MUX("DACR Sidetone", SND_SOC_NOPM, 0, 0, &rsidetone_mux),
858
859 SND_SOC_DAPM_AIF_IN("AIFRXL", "Left Playback", 0, SND_SOC_NOPM, 0, 0),
860 SND_SOC_DAPM_AIF_IN("AIFRXR", "Right Playback", 0, SND_SOC_NOPM, 0, 0),
861
862 SND_SOC_DAPM_MUX("Left Playback Mux", SND_SOC_NOPM, 0, 0, &lplay_mux),
863 SND_SOC_DAPM_MUX("Right Playback Mux", SND_SOC_NOPM, 0, 0, &rplay_mux),
864
865 SND_SOC_DAPM_DAC("DACL", NULL, WM8903_POWER_MANAGEMENT_6, 3, 0),
866 SND_SOC_DAPM_DAC("DACR", NULL, WM8903_POWER_MANAGEMENT_6, 2, 0),
867
868 SND_SOC_DAPM_MIXER("Left Output Mixer", WM8903_POWER_MANAGEMENT_1, 1, 0,
869 left_output_mixer, ARRAY_SIZE(left_output_mixer)),
870 SND_SOC_DAPM_MIXER("Right Output Mixer", WM8903_POWER_MANAGEMENT_1, 0, 0,
871 right_output_mixer, ARRAY_SIZE(right_output_mixer)),
872
873 SND_SOC_DAPM_MIXER("Left Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 1, 0,
874 left_speaker_mixer, ARRAY_SIZE(left_speaker_mixer)),
875 SND_SOC_DAPM_MIXER("Right Speaker Mixer", WM8903_POWER_MANAGEMENT_4, 0, 0,
876 right_speaker_mixer, ARRAY_SIZE(right_speaker_mixer)),
877
878 SND_SOC_DAPM_PGA_S("Left Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
879 1, 0, NULL, 0),
880 SND_SOC_DAPM_PGA_S("Right Headphone Output PGA", 0, WM8903_POWER_MANAGEMENT_2,
881 0, 0, NULL, 0),
882
883 SND_SOC_DAPM_PGA_S("Left Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 1, 0,
884 NULL, 0),
885 SND_SOC_DAPM_PGA_S("Right Line Output PGA", 0, WM8903_POWER_MANAGEMENT_3, 0, 0,
886 NULL, 0),
887
888 SND_SOC_DAPM_PGA_S("HPL_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 7, 0, NULL, 0),
889 SND_SOC_DAPM_PGA_S("HPL_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 6, 0, NULL, 0),
890 SND_SOC_DAPM_PGA_S("HPL_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 5, 0, NULL, 0),
891 SND_SOC_DAPM_PGA_S("HPL_ENA", 1, WM8903_ANALOGUE_HP_0, 4, 0, NULL, 0),
892 SND_SOC_DAPM_PGA_S("HPR_RMV_SHORT", 4, WM8903_ANALOGUE_HP_0, 3, 0, NULL, 0),
893 SND_SOC_DAPM_PGA_S("HPR_ENA_OUTP", 3, WM8903_ANALOGUE_HP_0, 2, 0, NULL, 0),
894 SND_SOC_DAPM_PGA_S("HPR_ENA_DLY", 2, WM8903_ANALOGUE_HP_0, 1, 0, NULL, 0),
895 SND_SOC_DAPM_PGA_S("HPR_ENA", 1, WM8903_ANALOGUE_HP_0, 0, 0, NULL, 0),
896
897 SND_SOC_DAPM_PGA_S("LINEOUTL_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 7, 0,
898 NULL, 0),
899 SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 6, 0,
900 NULL, 0),
901 SND_SOC_DAPM_PGA_S("LINEOUTL_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 5, 0,
902 NULL, 0),
903 SND_SOC_DAPM_PGA_S("LINEOUTL_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 4, 0,
904 NULL, 0),
905 SND_SOC_DAPM_PGA_S("LINEOUTR_RMV_SHORT", 4, WM8903_ANALOGUE_LINEOUT_0, 3, 0,
906 NULL, 0),
907 SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_OUTP", 3, WM8903_ANALOGUE_LINEOUT_0, 2, 0,
908 NULL, 0),
909 SND_SOC_DAPM_PGA_S("LINEOUTR_ENA_DLY", 2, WM8903_ANALOGUE_LINEOUT_0, 1, 0,
910 NULL, 0),
911 SND_SOC_DAPM_PGA_S("LINEOUTR_ENA", 1, WM8903_ANALOGUE_LINEOUT_0, 0, 0,
912 NULL, 0),
913
914 SND_SOC_DAPM_SUPPLY("DCS Master", WM8903_DC_SERVO_0, 4, 0, NULL, 0),
915 SND_SOC_DAPM_PGA_S("HPL_DCS", 3, SND_SOC_NOPM, 3, 0, wm8903_dcs_event,
916 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
917 SND_SOC_DAPM_PGA_S("HPR_DCS", 3, SND_SOC_NOPM, 2, 0, wm8903_dcs_event,
918 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
919 SND_SOC_DAPM_PGA_S("LINEOUTL_DCS", 3, SND_SOC_NOPM, 1, 0, wm8903_dcs_event,
920 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
921 SND_SOC_DAPM_PGA_S("LINEOUTR_DCS", 3, SND_SOC_NOPM, 0, 0, wm8903_dcs_event,
922 SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_PRE_PMD),
923
924 SND_SOC_DAPM_PGA("Left Speaker PGA", WM8903_POWER_MANAGEMENT_5, 1, 0,
925 NULL, 0),
926 SND_SOC_DAPM_PGA("Right Speaker PGA", WM8903_POWER_MANAGEMENT_5, 0, 0,
927 NULL, 0),
928
929 SND_SOC_DAPM_SUPPLY("Charge Pump", WM8903_CHARGE_PUMP_0, 0, 0,
930 wm8903_cp_event, SND_SOC_DAPM_POST_PMU),
931 SND_SOC_DAPM_SUPPLY("CLK_DSP", WM8903_CLOCK_RATES_2, 1, 0, NULL, 0),
932 SND_SOC_DAPM_SUPPLY("CLK_SYS", WM8903_CLOCK_RATES_2, 2, 0, NULL, 0),
933 };
934
935 static const struct snd_soc_dapm_route wm8903_intercon[] = {
936
937 { "CLK_DSP", NULL, "CLK_SYS" },
938 { "MICBIAS", NULL, "CLK_SYS" },
939 { "HPL_DCS", NULL, "CLK_SYS" },
940 { "HPR_DCS", NULL, "CLK_SYS" },
941 { "LINEOUTL_DCS", NULL, "CLK_SYS" },
942 { "LINEOUTR_DCS", NULL, "CLK_SYS" },
943
944 { "Left Input Mux", "IN1L", "IN1L" },
945 { "Left Input Mux", "IN2L", "IN2L" },
946 { "Left Input Mux", "IN3L", "IN3L" },
947
948 { "Left Input Inverting Mux", "IN1L", "IN1L" },
949 { "Left Input Inverting Mux", "IN2L", "IN2L" },
950 { "Left Input Inverting Mux", "IN3L", "IN3L" },
951
952 { "Right Input Mux", "IN1R", "IN1R" },
953 { "Right Input Mux", "IN2R", "IN2R" },
954 { "Right Input Mux", "IN3R", "IN3R" },
955
956 { "Right Input Inverting Mux", "IN1R", "IN1R" },
957 { "Right Input Inverting Mux", "IN2R", "IN2R" },
958 { "Right Input Inverting Mux", "IN3R", "IN3R" },
959
960 { "Left Input Mode Mux", "Single-Ended", "Left Input Inverting Mux" },
961 { "Left Input Mode Mux", "Differential Line",
962 "Left Input Mux" },
963 { "Left Input Mode Mux", "Differential Line",
964 "Left Input Inverting Mux" },
965 { "Left Input Mode Mux", "Differential Mic",
966 "Left Input Mux" },
967 { "Left Input Mode Mux", "Differential Mic",
968 "Left Input Inverting Mux" },
969
970 { "Right Input Mode Mux", "Single-Ended",
971 "Right Input Inverting Mux" },
972 { "Right Input Mode Mux", "Differential Line",
973 "Right Input Mux" },
974 { "Right Input Mode Mux", "Differential Line",
975 "Right Input Inverting Mux" },
976 { "Right Input Mode Mux", "Differential Mic",
977 "Right Input Mux" },
978 { "Right Input Mode Mux", "Differential Mic",
979 "Right Input Inverting Mux" },
980
981 { "Left Input PGA", NULL, "Left Input Mode Mux" },
982 { "Right Input PGA", NULL, "Right Input Mode Mux" },
983
984 { "Left ADC Input", "ADC", "Left Input PGA" },
985 { "Left ADC Input", "DMIC", "DMICDAT" },
986 { "Right ADC Input", "ADC", "Right Input PGA" },
987 { "Right ADC Input", "DMIC", "DMICDAT" },
988
989 { "Left Capture Mux", "Left", "ADCL" },
990 { "Left Capture Mux", "Right", "ADCR" },
991
992 { "Right Capture Mux", "Left", "ADCL" },
993 { "Right Capture Mux", "Right", "ADCR" },
994
995 { "AIFTXL", NULL, "Left Capture Mux" },
996 { "AIFTXR", NULL, "Right Capture Mux" },
997
998 { "ADCL", NULL, "Left ADC Input" },
999 { "ADCL", NULL, "CLK_DSP" },
1000 { "ADCR", NULL, "Right ADC Input" },
1001 { "ADCR", NULL, "CLK_DSP" },
1002
1003 { "Left Playback Mux", "Left", "AIFRXL" },
1004 { "Left Playback Mux", "Right", "AIFRXR" },
1005
1006 { "Right Playback Mux", "Left", "AIFRXL" },
1007 { "Right Playback Mux", "Right", "AIFRXR" },
1008
1009 { "DACL Sidetone", "Left", "ADCL" },
1010 { "DACL Sidetone", "Right", "ADCR" },
1011 { "DACR Sidetone", "Left", "ADCL" },
1012 { "DACR Sidetone", "Right", "ADCR" },
1013
1014 { "DACL", NULL, "Left Playback Mux" },
1015 { "DACL", NULL, "DACL Sidetone" },
1016 { "DACL", NULL, "CLK_DSP" },
1017
1018 { "DACR", NULL, "Right Playback Mux" },
1019 { "DACR", NULL, "DACR Sidetone" },
1020 { "DACR", NULL, "CLK_DSP" },
1021
1022 { "Left Output Mixer", "Left Bypass Switch", "Left Input PGA" },
1023 { "Left Output Mixer", "Right Bypass Switch", "Right Input PGA" },
1024 { "Left Output Mixer", "DACL Switch", "DACL" },
1025 { "Left Output Mixer", "DACR Switch", "DACR" },
1026
1027 { "Right Output Mixer", "Left Bypass Switch", "Left Input PGA" },
1028 { "Right Output Mixer", "Right Bypass Switch", "Right Input PGA" },
1029 { "Right Output Mixer", "DACL Switch", "DACL" },
1030 { "Right Output Mixer", "DACR Switch", "DACR" },
1031
1032 { "Left Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
1033 { "Left Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
1034 { "Left Speaker Mixer", "DACL Switch", "DACL" },
1035 { "Left Speaker Mixer", "DACR Switch", "DACR" },
1036
1037 { "Right Speaker Mixer", "Left Bypass Switch", "Left Input PGA" },
1038 { "Right Speaker Mixer", "Right Bypass Switch", "Right Input PGA" },
1039 { "Right Speaker Mixer", "DACL Switch", "DACL" },
1040 { "Right Speaker Mixer", "DACR Switch", "DACR" },
1041
1042 { "Left Line Output PGA", NULL, "Left Output Mixer" },
1043 { "Right Line Output PGA", NULL, "Right Output Mixer" },
1044
1045 { "Left Headphone Output PGA", NULL, "Left Output Mixer" },
1046 { "Right Headphone Output PGA", NULL, "Right Output Mixer" },
1047
1048 { "Left Speaker PGA", NULL, "Left Speaker Mixer" },
1049 { "Right Speaker PGA", NULL, "Right Speaker Mixer" },
1050
1051 { "HPL_ENA", NULL, "Left Headphone Output PGA" },
1052 { "HPR_ENA", NULL, "Right Headphone Output PGA" },
1053 { "HPL_ENA_DLY", NULL, "HPL_ENA" },
1054 { "HPR_ENA_DLY", NULL, "HPR_ENA" },
1055 { "LINEOUTL_ENA", NULL, "Left Line Output PGA" },
1056 { "LINEOUTR_ENA", NULL, "Right Line Output PGA" },
1057 { "LINEOUTL_ENA_DLY", NULL, "LINEOUTL_ENA" },
1058 { "LINEOUTR_ENA_DLY", NULL, "LINEOUTR_ENA" },
1059
1060 { "HPL_DCS", NULL, "DCS Master" },
1061 { "HPR_DCS", NULL, "DCS Master" },
1062 { "LINEOUTL_DCS", NULL, "DCS Master" },
1063 { "LINEOUTR_DCS", NULL, "DCS Master" },
1064
1065 { "HPL_DCS", NULL, "HPL_ENA_DLY" },
1066 { "HPR_DCS", NULL, "HPR_ENA_DLY" },
1067 { "LINEOUTL_DCS", NULL, "LINEOUTL_ENA_DLY" },
1068 { "LINEOUTR_DCS", NULL, "LINEOUTR_ENA_DLY" },
1069
1070 { "HPL_ENA_OUTP", NULL, "HPL_DCS" },
1071 { "HPR_ENA_OUTP", NULL, "HPR_DCS" },
1072 { "LINEOUTL_ENA_OUTP", NULL, "LINEOUTL_DCS" },
1073 { "LINEOUTR_ENA_OUTP", NULL, "LINEOUTR_DCS" },
1074
1075 { "HPL_RMV_SHORT", NULL, "HPL_ENA_OUTP" },
1076 { "HPR_RMV_SHORT", NULL, "HPR_ENA_OUTP" },
1077 { "LINEOUTL_RMV_SHORT", NULL, "LINEOUTL_ENA_OUTP" },
1078 { "LINEOUTR_RMV_SHORT", NULL, "LINEOUTR_ENA_OUTP" },
1079
1080 { "HPOUTL", NULL, "HPL_RMV_SHORT" },
1081 { "HPOUTR", NULL, "HPR_RMV_SHORT" },
1082 { "LINEOUTL", NULL, "LINEOUTL_RMV_SHORT" },
1083 { "LINEOUTR", NULL, "LINEOUTR_RMV_SHORT" },
1084
1085 { "LOP", NULL, "Left Speaker PGA" },
1086 { "LON", NULL, "Left Speaker PGA" },
1087
1088 { "ROP", NULL, "Right Speaker PGA" },
1089 { "RON", NULL, "Right Speaker PGA" },
1090
1091 { "Charge Pump", NULL, "CLK_DSP" },
1092
1093 { "Left Headphone Output PGA", NULL, "Charge Pump" },
1094 { "Right Headphone Output PGA", NULL, "Charge Pump" },
1095 { "Left Line Output PGA", NULL, "Charge Pump" },
1096 { "Right Line Output PGA", NULL, "Charge Pump" },
1097 };
1098
wm8903_set_bias_level(struct snd_soc_component * component,enum snd_soc_bias_level level)1099 static int wm8903_set_bias_level(struct snd_soc_component *component,
1100 enum snd_soc_bias_level level)
1101 {
1102 switch (level) {
1103 case SND_SOC_BIAS_ON:
1104 break;
1105
1106 case SND_SOC_BIAS_PREPARE:
1107 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1108 WM8903_VMID_RES_MASK,
1109 WM8903_VMID_RES_50K);
1110 break;
1111
1112 case SND_SOC_BIAS_STANDBY:
1113 if (snd_soc_component_get_bias_level(component) == SND_SOC_BIAS_OFF) {
1114 snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
1115 WM8903_POBCTRL | WM8903_ISEL_MASK |
1116 WM8903_STARTUP_BIAS_ENA |
1117 WM8903_BIAS_ENA,
1118 WM8903_POBCTRL |
1119 (2 << WM8903_ISEL_SHIFT) |
1120 WM8903_STARTUP_BIAS_ENA);
1121
1122 snd_soc_component_update_bits(component,
1123 WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
1124 WM8903_SPK_DISCHARGE,
1125 WM8903_SPK_DISCHARGE);
1126
1127 msleep(33);
1128
1129 snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
1130 WM8903_SPKL_ENA | WM8903_SPKR_ENA,
1131 WM8903_SPKL_ENA | WM8903_SPKR_ENA);
1132
1133 snd_soc_component_update_bits(component,
1134 WM8903_ANALOGUE_SPK_OUTPUT_CONTROL_0,
1135 WM8903_SPK_DISCHARGE, 0);
1136
1137 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1138 WM8903_VMID_TIE_ENA |
1139 WM8903_BUFIO_ENA |
1140 WM8903_VMID_IO_ENA |
1141 WM8903_VMID_SOFT_MASK |
1142 WM8903_VMID_RES_MASK |
1143 WM8903_VMID_BUF_ENA,
1144 WM8903_VMID_TIE_ENA |
1145 WM8903_BUFIO_ENA |
1146 WM8903_VMID_IO_ENA |
1147 (2 << WM8903_VMID_SOFT_SHIFT) |
1148 WM8903_VMID_RES_250K |
1149 WM8903_VMID_BUF_ENA);
1150
1151 msleep(129);
1152
1153 snd_soc_component_update_bits(component, WM8903_POWER_MANAGEMENT_5,
1154 WM8903_SPKL_ENA | WM8903_SPKR_ENA,
1155 0);
1156
1157 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1158 WM8903_VMID_SOFT_MASK, 0);
1159
1160 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1161 WM8903_VMID_RES_MASK,
1162 WM8903_VMID_RES_50K);
1163
1164 snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
1165 WM8903_BIAS_ENA | WM8903_POBCTRL,
1166 WM8903_BIAS_ENA);
1167
1168 /* By default no bypass paths are enabled so
1169 * enable Class W support.
1170 */
1171 dev_dbg(component->dev, "Enabling Class W\n");
1172 snd_soc_component_update_bits(component, WM8903_CLASS_W_0,
1173 WM8903_CP_DYN_FREQ |
1174 WM8903_CP_DYN_V,
1175 WM8903_CP_DYN_FREQ |
1176 WM8903_CP_DYN_V);
1177 }
1178
1179 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1180 WM8903_VMID_RES_MASK,
1181 WM8903_VMID_RES_250K);
1182 break;
1183
1184 case SND_SOC_BIAS_OFF:
1185 snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
1186 WM8903_BIAS_ENA, 0);
1187
1188 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1189 WM8903_VMID_SOFT_MASK,
1190 2 << WM8903_VMID_SOFT_SHIFT);
1191
1192 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1193 WM8903_VMID_BUF_ENA, 0);
1194
1195 msleep(290);
1196
1197 snd_soc_component_update_bits(component, WM8903_VMID_CONTROL_0,
1198 WM8903_VMID_TIE_ENA | WM8903_BUFIO_ENA |
1199 WM8903_VMID_IO_ENA | WM8903_VMID_RES_MASK |
1200 WM8903_VMID_SOFT_MASK |
1201 WM8903_VMID_BUF_ENA, 0);
1202
1203 snd_soc_component_update_bits(component, WM8903_BIAS_CONTROL_0,
1204 WM8903_STARTUP_BIAS_ENA, 0);
1205 break;
1206 }
1207
1208 return 0;
1209 }
1210
wm8903_set_dai_sysclk(struct snd_soc_dai * codec_dai,int clk_id,unsigned int freq,int dir)1211 static int wm8903_set_dai_sysclk(struct snd_soc_dai *codec_dai,
1212 int clk_id, unsigned int freq, int dir)
1213 {
1214 struct snd_soc_component *component = codec_dai->component;
1215 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
1216
1217 wm8903->sysclk = freq;
1218
1219 return 0;
1220 }
1221
wm8903_set_dai_fmt(struct snd_soc_dai * codec_dai,unsigned int fmt)1222 static int wm8903_set_dai_fmt(struct snd_soc_dai *codec_dai,
1223 unsigned int fmt)
1224 {
1225 struct snd_soc_component *component = codec_dai->component;
1226 u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1);
1227
1228 aif1 &= ~(WM8903_LRCLK_DIR | WM8903_BCLK_DIR | WM8903_AIF_FMT_MASK |
1229 WM8903_AIF_LRCLK_INV | WM8903_AIF_BCLK_INV);
1230
1231 switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
1232 case SND_SOC_DAIFMT_CBS_CFS:
1233 break;
1234 case SND_SOC_DAIFMT_CBS_CFM:
1235 aif1 |= WM8903_LRCLK_DIR;
1236 break;
1237 case SND_SOC_DAIFMT_CBM_CFM:
1238 aif1 |= WM8903_LRCLK_DIR | WM8903_BCLK_DIR;
1239 break;
1240 case SND_SOC_DAIFMT_CBM_CFS:
1241 aif1 |= WM8903_BCLK_DIR;
1242 break;
1243 default:
1244 return -EINVAL;
1245 }
1246
1247 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1248 case SND_SOC_DAIFMT_DSP_A:
1249 aif1 |= 0x3;
1250 break;
1251 case SND_SOC_DAIFMT_DSP_B:
1252 aif1 |= 0x3 | WM8903_AIF_LRCLK_INV;
1253 break;
1254 case SND_SOC_DAIFMT_I2S:
1255 aif1 |= 0x2;
1256 break;
1257 case SND_SOC_DAIFMT_RIGHT_J:
1258 aif1 |= 0x1;
1259 break;
1260 case SND_SOC_DAIFMT_LEFT_J:
1261 break;
1262 default:
1263 return -EINVAL;
1264 }
1265
1266 /* Clock inversion */
1267 switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
1268 case SND_SOC_DAIFMT_DSP_A:
1269 case SND_SOC_DAIFMT_DSP_B:
1270 /* frame inversion not valid for DSP modes */
1271 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1272 case SND_SOC_DAIFMT_NB_NF:
1273 break;
1274 case SND_SOC_DAIFMT_IB_NF:
1275 aif1 |= WM8903_AIF_BCLK_INV;
1276 break;
1277 default:
1278 return -EINVAL;
1279 }
1280 break;
1281 case SND_SOC_DAIFMT_I2S:
1282 case SND_SOC_DAIFMT_RIGHT_J:
1283 case SND_SOC_DAIFMT_LEFT_J:
1284 switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
1285 case SND_SOC_DAIFMT_NB_NF:
1286 break;
1287 case SND_SOC_DAIFMT_IB_IF:
1288 aif1 |= WM8903_AIF_BCLK_INV | WM8903_AIF_LRCLK_INV;
1289 break;
1290 case SND_SOC_DAIFMT_IB_NF:
1291 aif1 |= WM8903_AIF_BCLK_INV;
1292 break;
1293 case SND_SOC_DAIFMT_NB_IF:
1294 aif1 |= WM8903_AIF_LRCLK_INV;
1295 break;
1296 default:
1297 return -EINVAL;
1298 }
1299 break;
1300 default:
1301 return -EINVAL;
1302 }
1303
1304 snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
1305
1306 return 0;
1307 }
1308
wm8903_mute(struct snd_soc_dai * codec_dai,int mute,int direction)1309 static int wm8903_mute(struct snd_soc_dai *codec_dai, int mute, int direction)
1310 {
1311 struct snd_soc_component *component = codec_dai->component;
1312 u16 reg;
1313
1314 reg = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1);
1315
1316 if (mute)
1317 reg |= WM8903_DAC_MUTE;
1318 else
1319 reg &= ~WM8903_DAC_MUTE;
1320
1321 snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, reg);
1322
1323 return 0;
1324 }
1325
1326 /* Lookup table for CLK_SYS/fs ratio. 256fs or more is recommended
1327 * for optimal performance so we list the lower rates first and match
1328 * on the last match we find. */
1329 static struct {
1330 int div;
1331 int rate;
1332 int mode;
1333 int mclk_div;
1334 } clk_sys_ratios[] = {
1335 { 64, 0x0, 0x0, 1 },
1336 { 68, 0x0, 0x1, 1 },
1337 { 125, 0x0, 0x2, 1 },
1338 { 128, 0x1, 0x0, 1 },
1339 { 136, 0x1, 0x1, 1 },
1340 { 192, 0x2, 0x0, 1 },
1341 { 204, 0x2, 0x1, 1 },
1342
1343 { 64, 0x0, 0x0, 2 },
1344 { 68, 0x0, 0x1, 2 },
1345 { 125, 0x0, 0x2, 2 },
1346 { 128, 0x1, 0x0, 2 },
1347 { 136, 0x1, 0x1, 2 },
1348 { 192, 0x2, 0x0, 2 },
1349 { 204, 0x2, 0x1, 2 },
1350
1351 { 250, 0x2, 0x2, 1 },
1352 { 256, 0x3, 0x0, 1 },
1353 { 272, 0x3, 0x1, 1 },
1354 { 384, 0x4, 0x0, 1 },
1355 { 408, 0x4, 0x1, 1 },
1356 { 375, 0x4, 0x2, 1 },
1357 { 512, 0x5, 0x0, 1 },
1358 { 544, 0x5, 0x1, 1 },
1359 { 500, 0x5, 0x2, 1 },
1360 { 768, 0x6, 0x0, 1 },
1361 { 816, 0x6, 0x1, 1 },
1362 { 750, 0x6, 0x2, 1 },
1363 { 1024, 0x7, 0x0, 1 },
1364 { 1088, 0x7, 0x1, 1 },
1365 { 1000, 0x7, 0x2, 1 },
1366 { 1408, 0x8, 0x0, 1 },
1367 { 1496, 0x8, 0x1, 1 },
1368 { 1536, 0x9, 0x0, 1 },
1369 { 1632, 0x9, 0x1, 1 },
1370 { 1500, 0x9, 0x2, 1 },
1371
1372 { 250, 0x2, 0x2, 2 },
1373 { 256, 0x3, 0x0, 2 },
1374 { 272, 0x3, 0x1, 2 },
1375 { 384, 0x4, 0x0, 2 },
1376 { 408, 0x4, 0x1, 2 },
1377 { 375, 0x4, 0x2, 2 },
1378 { 512, 0x5, 0x0, 2 },
1379 { 544, 0x5, 0x1, 2 },
1380 { 500, 0x5, 0x2, 2 },
1381 { 768, 0x6, 0x0, 2 },
1382 { 816, 0x6, 0x1, 2 },
1383 { 750, 0x6, 0x2, 2 },
1384 { 1024, 0x7, 0x0, 2 },
1385 { 1088, 0x7, 0x1, 2 },
1386 { 1000, 0x7, 0x2, 2 },
1387 { 1408, 0x8, 0x0, 2 },
1388 { 1496, 0x8, 0x1, 2 },
1389 { 1536, 0x9, 0x0, 2 },
1390 { 1632, 0x9, 0x1, 2 },
1391 { 1500, 0x9, 0x2, 2 },
1392 };
1393
1394 /* CLK_SYS/BCLK ratios - multiplied by 10 due to .5s */
1395 static struct {
1396 int ratio;
1397 int div;
1398 } bclk_divs[] = {
1399 { 10, 0 },
1400 { 20, 2 },
1401 { 30, 3 },
1402 { 40, 4 },
1403 { 50, 5 },
1404 { 60, 7 },
1405 { 80, 8 },
1406 { 100, 9 },
1407 { 120, 11 },
1408 { 160, 12 },
1409 { 200, 13 },
1410 { 220, 14 },
1411 { 240, 15 },
1412 { 300, 17 },
1413 { 320, 18 },
1414 { 440, 19 },
1415 { 480, 20 },
1416 };
1417
1418 /* Sample rates for DSP */
1419 static struct {
1420 int rate;
1421 int value;
1422 } sample_rates[] = {
1423 { 8000, 0 },
1424 { 11025, 1 },
1425 { 12000, 2 },
1426 { 16000, 3 },
1427 { 22050, 4 },
1428 { 24000, 5 },
1429 { 32000, 6 },
1430 { 44100, 7 },
1431 { 48000, 8 },
1432 { 88200, 9 },
1433 { 96000, 10 },
1434 { 0, 0 },
1435 };
1436
wm8903_hw_params(struct snd_pcm_substream * substream,struct snd_pcm_hw_params * params,struct snd_soc_dai * dai)1437 static int wm8903_hw_params(struct snd_pcm_substream *substream,
1438 struct snd_pcm_hw_params *params,
1439 struct snd_soc_dai *dai)
1440 {
1441 struct snd_soc_component *component = dai->component;
1442 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
1443 int fs = params_rate(params);
1444 int bclk;
1445 int bclk_div;
1446 int i;
1447 int dsp_config;
1448 int clk_config;
1449 int best_val;
1450 int cur_val;
1451 int clk_sys;
1452
1453 u16 aif1 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_1);
1454 u16 aif2 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_2);
1455 u16 aif3 = snd_soc_component_read(component, WM8903_AUDIO_INTERFACE_3);
1456 u16 clock0 = snd_soc_component_read(component, WM8903_CLOCK_RATES_0);
1457 u16 clock1 = snd_soc_component_read(component, WM8903_CLOCK_RATES_1);
1458 u16 dac_digital1 = snd_soc_component_read(component, WM8903_DAC_DIGITAL_1);
1459
1460 /* Enable sloping stopband filter for low sample rates */
1461 if (fs <= 24000)
1462 dac_digital1 |= WM8903_DAC_SB_FILT;
1463 else
1464 dac_digital1 &= ~WM8903_DAC_SB_FILT;
1465
1466 /* Configure sample rate logic for DSP - choose nearest rate */
1467 dsp_config = 0;
1468 best_val = abs(sample_rates[dsp_config].rate - fs);
1469 for (i = 1; i < ARRAY_SIZE(sample_rates); i++) {
1470 cur_val = abs(sample_rates[i].rate - fs);
1471 if (cur_val <= best_val) {
1472 dsp_config = i;
1473 best_val = cur_val;
1474 }
1475 }
1476
1477 dev_dbg(component->dev, "DSP fs = %dHz\n", sample_rates[dsp_config].rate);
1478 clock1 &= ~WM8903_SAMPLE_RATE_MASK;
1479 clock1 |= sample_rates[dsp_config].value;
1480
1481 aif1 &= ~WM8903_AIF_WL_MASK;
1482 bclk = 2 * fs;
1483 switch (params_width(params)) {
1484 case 16:
1485 bclk *= 16;
1486 break;
1487 case 20:
1488 bclk *= 20;
1489 aif1 |= 0x4;
1490 break;
1491 case 24:
1492 bclk *= 24;
1493 aif1 |= 0x8;
1494 break;
1495 case 32:
1496 bclk *= 32;
1497 aif1 |= 0xc;
1498 break;
1499 default:
1500 return -EINVAL;
1501 }
1502
1503 dev_dbg(component->dev, "MCLK = %dHz, target sample rate = %dHz\n",
1504 wm8903->sysclk, fs);
1505
1506 /* We may not have an MCLK which allows us to generate exactly
1507 * the clock we want, particularly with USB derived inputs, so
1508 * approximate.
1509 */
1510 clk_config = 0;
1511 best_val = abs((wm8903->sysclk /
1512 (clk_sys_ratios[0].mclk_div *
1513 clk_sys_ratios[0].div)) - fs);
1514 for (i = 1; i < ARRAY_SIZE(clk_sys_ratios); i++) {
1515 cur_val = abs((wm8903->sysclk /
1516 (clk_sys_ratios[i].mclk_div *
1517 clk_sys_ratios[i].div)) - fs);
1518
1519 if (cur_val <= best_val) {
1520 clk_config = i;
1521 best_val = cur_val;
1522 }
1523 }
1524
1525 if (clk_sys_ratios[clk_config].mclk_div == 2) {
1526 clock0 |= WM8903_MCLKDIV2;
1527 clk_sys = wm8903->sysclk / 2;
1528 } else {
1529 clock0 &= ~WM8903_MCLKDIV2;
1530 clk_sys = wm8903->sysclk;
1531 }
1532
1533 clock1 &= ~(WM8903_CLK_SYS_RATE_MASK |
1534 WM8903_CLK_SYS_MODE_MASK);
1535 clock1 |= clk_sys_ratios[clk_config].rate << WM8903_CLK_SYS_RATE_SHIFT;
1536 clock1 |= clk_sys_ratios[clk_config].mode << WM8903_CLK_SYS_MODE_SHIFT;
1537
1538 dev_dbg(component->dev, "CLK_SYS_RATE=%x, CLK_SYS_MODE=%x div=%d\n",
1539 clk_sys_ratios[clk_config].rate,
1540 clk_sys_ratios[clk_config].mode,
1541 clk_sys_ratios[clk_config].div);
1542
1543 dev_dbg(component->dev, "Actual CLK_SYS = %dHz\n", clk_sys);
1544
1545 /* We may not get quite the right frequency if using
1546 * approximate clocks so look for the closest match that is
1547 * higher than the target (we need to ensure that there enough
1548 * BCLKs to clock out the samples).
1549 */
1550 bclk_div = 0;
1551 i = 1;
1552 while (i < ARRAY_SIZE(bclk_divs)) {
1553 cur_val = ((clk_sys * 10) / bclk_divs[i].ratio) - bclk;
1554 if (cur_val < 0) /* BCLK table is sorted */
1555 break;
1556 bclk_div = i;
1557 i++;
1558 }
1559
1560 aif2 &= ~WM8903_BCLK_DIV_MASK;
1561 aif3 &= ~WM8903_LRCLK_RATE_MASK;
1562
1563 dev_dbg(component->dev, "BCLK ratio %d for %dHz - actual BCLK = %dHz\n",
1564 bclk_divs[bclk_div].ratio / 10, bclk,
1565 (clk_sys * 10) / bclk_divs[bclk_div].ratio);
1566
1567 aif2 |= bclk_divs[bclk_div].div;
1568 aif3 |= bclk / fs;
1569
1570 wm8903->fs = params_rate(params);
1571 wm8903_set_deemph(component);
1572
1573 snd_soc_component_write(component, WM8903_CLOCK_RATES_0, clock0);
1574 snd_soc_component_write(component, WM8903_CLOCK_RATES_1, clock1);
1575 snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_1, aif1);
1576 snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_2, aif2);
1577 snd_soc_component_write(component, WM8903_AUDIO_INTERFACE_3, aif3);
1578 snd_soc_component_write(component, WM8903_DAC_DIGITAL_1, dac_digital1);
1579
1580 return 0;
1581 }
1582
1583 /**
1584 * wm8903_mic_detect - Enable microphone detection via the WM8903 IRQ
1585 *
1586 * @component: WM8903 component
1587 * @jack: jack to report detection events on
1588 * @det: value to report for presence detection
1589 * @shrt: value to report for short detection
1590 *
1591 * Enable microphone detection via IRQ on the WM8903. If GPIOs are
1592 * being used to bring out signals to the processor then only platform
1593 * data configuration is needed for WM8903 and processor GPIOs should
1594 * be configured using snd_soc_jack_add_gpios() instead.
1595 *
1596 * The current threasholds for detection should be configured using
1597 * micdet_cfg in the platform data. Using this function will force on
1598 * the microphone bias for the device.
1599 */
wm8903_mic_detect(struct snd_soc_component * component,struct snd_soc_jack * jack,int det,int shrt)1600 int wm8903_mic_detect(struct snd_soc_component *component, struct snd_soc_jack *jack,
1601 int det, int shrt)
1602 {
1603 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
1604 int irq_mask = WM8903_MICDET_EINT | WM8903_MICSHRT_EINT;
1605
1606 dev_dbg(component->dev, "Enabling microphone detection: %x %x\n",
1607 det, shrt);
1608
1609 /* Store the configuration */
1610 wm8903->mic_jack = jack;
1611 wm8903->mic_det = det;
1612 wm8903->mic_short = shrt;
1613
1614 /* Enable interrupts we've got a report configured for */
1615 if (det)
1616 irq_mask &= ~WM8903_MICDET_EINT;
1617 if (shrt)
1618 irq_mask &= ~WM8903_MICSHRT_EINT;
1619
1620 snd_soc_component_update_bits(component, WM8903_INTERRUPT_STATUS_1_MASK,
1621 WM8903_MICDET_EINT | WM8903_MICSHRT_EINT,
1622 irq_mask);
1623
1624 if (det || shrt) {
1625 /* Enable mic detection, this may not have been set through
1626 * platform data (eg, if the defaults are OK). */
1627 snd_soc_component_update_bits(component, WM8903_WRITE_SEQUENCER_0,
1628 WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
1629 snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
1630 WM8903_MICDET_ENA, WM8903_MICDET_ENA);
1631 } else {
1632 snd_soc_component_update_bits(component, WM8903_MIC_BIAS_CONTROL_0,
1633 WM8903_MICDET_ENA, 0);
1634 }
1635
1636 return 0;
1637 }
1638 EXPORT_SYMBOL_GPL(wm8903_mic_detect);
1639
wm8903_irq(int irq,void * data)1640 static irqreturn_t wm8903_irq(int irq, void *data)
1641 {
1642 struct wm8903_priv *wm8903 = data;
1643 int mic_report, ret;
1644 unsigned int int_val, mask, int_pol;
1645
1646 ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1_MASK,
1647 &mask);
1648 if (ret != 0) {
1649 dev_err(wm8903->dev, "Failed to read IRQ mask: %d\n", ret);
1650 return IRQ_NONE;
1651 }
1652
1653 ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_STATUS_1, &int_val);
1654 if (ret != 0) {
1655 dev_err(wm8903->dev, "Failed to read IRQ status: %d\n", ret);
1656 return IRQ_NONE;
1657 }
1658
1659 int_val &= ~mask;
1660
1661 if (int_val & WM8903_WSEQ_BUSY_EINT) {
1662 dev_warn(wm8903->dev, "Write sequencer done\n");
1663 }
1664
1665 /*
1666 * The rest is microphone jack detection. We need to manually
1667 * invert the polarity of the interrupt after each event - to
1668 * simplify the code keep track of the last state we reported
1669 * and just invert the relevant bits in both the report and
1670 * the polarity register.
1671 */
1672 mic_report = wm8903->mic_last_report;
1673 ret = regmap_read(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1,
1674 &int_pol);
1675 if (ret != 0) {
1676 dev_err(wm8903->dev, "Failed to read interrupt polarity: %d\n",
1677 ret);
1678 return IRQ_HANDLED;
1679 }
1680
1681 #ifndef CONFIG_SND_SOC_WM8903_MODULE
1682 if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT))
1683 trace_snd_soc_jack_irq(dev_name(wm8903->dev));
1684 #endif
1685
1686 if (int_val & WM8903_MICSHRT_EINT) {
1687 dev_dbg(wm8903->dev, "Microphone short (pol=%x)\n", int_pol);
1688
1689 mic_report ^= wm8903->mic_short;
1690 int_pol ^= WM8903_MICSHRT_INV;
1691 }
1692
1693 if (int_val & WM8903_MICDET_EINT) {
1694 dev_dbg(wm8903->dev, "Microphone detect (pol=%x)\n", int_pol);
1695
1696 mic_report ^= wm8903->mic_det;
1697 int_pol ^= WM8903_MICDET_INV;
1698
1699 msleep(wm8903->mic_delay);
1700 }
1701
1702 regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_POLARITY_1,
1703 WM8903_MICSHRT_INV | WM8903_MICDET_INV, int_pol);
1704
1705 snd_soc_jack_report(wm8903->mic_jack, mic_report,
1706 wm8903->mic_short | wm8903->mic_det);
1707
1708 wm8903->mic_last_report = mic_report;
1709
1710 return IRQ_HANDLED;
1711 }
1712
1713 #define WM8903_PLAYBACK_RATES (SNDRV_PCM_RATE_8000 |\
1714 SNDRV_PCM_RATE_11025 | \
1715 SNDRV_PCM_RATE_16000 | \
1716 SNDRV_PCM_RATE_22050 | \
1717 SNDRV_PCM_RATE_32000 | \
1718 SNDRV_PCM_RATE_44100 | \
1719 SNDRV_PCM_RATE_48000 | \
1720 SNDRV_PCM_RATE_88200 | \
1721 SNDRV_PCM_RATE_96000)
1722
1723 #define WM8903_CAPTURE_RATES (SNDRV_PCM_RATE_8000 |\
1724 SNDRV_PCM_RATE_11025 | \
1725 SNDRV_PCM_RATE_16000 | \
1726 SNDRV_PCM_RATE_22050 | \
1727 SNDRV_PCM_RATE_32000 | \
1728 SNDRV_PCM_RATE_44100 | \
1729 SNDRV_PCM_RATE_48000)
1730
1731 #define WM8903_FORMATS (SNDRV_PCM_FMTBIT_S16_LE |\
1732 SNDRV_PCM_FMTBIT_S20_3LE |\
1733 SNDRV_PCM_FMTBIT_S24_LE)
1734
1735 static const struct snd_soc_dai_ops wm8903_dai_ops = {
1736 .hw_params = wm8903_hw_params,
1737 .mute_stream = wm8903_mute,
1738 .set_fmt = wm8903_set_dai_fmt,
1739 .set_sysclk = wm8903_set_dai_sysclk,
1740 .no_capture_mute = 1,
1741 };
1742
1743 static struct snd_soc_dai_driver wm8903_dai = {
1744 .name = "wm8903-hifi",
1745 .playback = {
1746 .stream_name = "Playback",
1747 .channels_min = 2,
1748 .channels_max = 2,
1749 .rates = WM8903_PLAYBACK_RATES,
1750 .formats = WM8903_FORMATS,
1751 },
1752 .capture = {
1753 .stream_name = "Capture",
1754 .channels_min = 2,
1755 .channels_max = 2,
1756 .rates = WM8903_CAPTURE_RATES,
1757 .formats = WM8903_FORMATS,
1758 },
1759 .ops = &wm8903_dai_ops,
1760 .symmetric_rate = 1,
1761 };
1762
wm8903_resume(struct snd_soc_component * component)1763 static int wm8903_resume(struct snd_soc_component *component)
1764 {
1765 struct wm8903_priv *wm8903 = snd_soc_component_get_drvdata(component);
1766
1767 regcache_sync(wm8903->regmap);
1768
1769 return 0;
1770 }
1771
1772 #ifdef CONFIG_GPIOLIB
wm8903_gpio_request(struct gpio_chip * chip,unsigned offset)1773 static int wm8903_gpio_request(struct gpio_chip *chip, unsigned offset)
1774 {
1775 if (offset >= WM8903_NUM_GPIO)
1776 return -EINVAL;
1777
1778 return 0;
1779 }
1780
wm8903_gpio_direction_in(struct gpio_chip * chip,unsigned offset)1781 static int wm8903_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
1782 {
1783 struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
1784 unsigned int mask, val;
1785 int ret;
1786
1787 mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK;
1788 val = (WM8903_GPn_FN_GPIO_INPUT << WM8903_GP1_FN_SHIFT) |
1789 WM8903_GP1_DIR;
1790
1791 ret = regmap_update_bits(wm8903->regmap,
1792 WM8903_GPIO_CONTROL_1 + offset, mask, val);
1793 if (ret < 0)
1794 return ret;
1795
1796 return 0;
1797 }
1798
wm8903_gpio_get(struct gpio_chip * chip,unsigned offset)1799 static int wm8903_gpio_get(struct gpio_chip *chip, unsigned offset)
1800 {
1801 struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
1802 unsigned int reg;
1803
1804 regmap_read(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset, ®);
1805
1806 return !!((reg & WM8903_GP1_LVL_MASK) >> WM8903_GP1_LVL_SHIFT);
1807 }
1808
wm8903_gpio_direction_out(struct gpio_chip * chip,unsigned offset,int value)1809 static int wm8903_gpio_direction_out(struct gpio_chip *chip,
1810 unsigned offset, int value)
1811 {
1812 struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
1813 unsigned int mask, val;
1814 int ret;
1815
1816 mask = WM8903_GP1_FN_MASK | WM8903_GP1_DIR_MASK | WM8903_GP1_LVL_MASK;
1817 val = (WM8903_GPn_FN_GPIO_OUTPUT << WM8903_GP1_FN_SHIFT) |
1818 (value << WM8903_GP2_LVL_SHIFT);
1819
1820 ret = regmap_update_bits(wm8903->regmap,
1821 WM8903_GPIO_CONTROL_1 + offset, mask, val);
1822 if (ret < 0)
1823 return ret;
1824
1825 return 0;
1826 }
1827
wm8903_gpio_set(struct gpio_chip * chip,unsigned offset,int value)1828 static void wm8903_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
1829 {
1830 struct wm8903_priv *wm8903 = gpiochip_get_data(chip);
1831
1832 regmap_update_bits(wm8903->regmap, WM8903_GPIO_CONTROL_1 + offset,
1833 WM8903_GP1_LVL_MASK,
1834 !!value << WM8903_GP1_LVL_SHIFT);
1835 }
1836
1837 static const struct gpio_chip wm8903_template_chip = {
1838 .label = "wm8903",
1839 .owner = THIS_MODULE,
1840 .request = wm8903_gpio_request,
1841 .direction_input = wm8903_gpio_direction_in,
1842 .get = wm8903_gpio_get,
1843 .direction_output = wm8903_gpio_direction_out,
1844 .set = wm8903_gpio_set,
1845 .can_sleep = 1,
1846 };
1847
wm8903_init_gpio(struct wm8903_priv * wm8903)1848 static void wm8903_init_gpio(struct wm8903_priv *wm8903)
1849 {
1850 struct wm8903_platform_data *pdata = wm8903->pdata;
1851 int ret;
1852
1853 wm8903->gpio_chip = wm8903_template_chip;
1854 wm8903->gpio_chip.ngpio = WM8903_NUM_GPIO;
1855 wm8903->gpio_chip.parent = wm8903->dev;
1856
1857 if (pdata->gpio_base)
1858 wm8903->gpio_chip.base = pdata->gpio_base;
1859 else
1860 wm8903->gpio_chip.base = -1;
1861
1862 ret = gpiochip_add_data(&wm8903->gpio_chip, wm8903);
1863 if (ret != 0)
1864 dev_err(wm8903->dev, "Failed to add GPIOs: %d\n", ret);
1865 }
1866
wm8903_free_gpio(struct wm8903_priv * wm8903)1867 static void wm8903_free_gpio(struct wm8903_priv *wm8903)
1868 {
1869 gpiochip_remove(&wm8903->gpio_chip);
1870 }
1871 #else
wm8903_init_gpio(struct wm8903_priv * wm8903)1872 static void wm8903_init_gpio(struct wm8903_priv *wm8903)
1873 {
1874 }
1875
wm8903_free_gpio(struct wm8903_priv * wm8903)1876 static void wm8903_free_gpio(struct wm8903_priv *wm8903)
1877 {
1878 }
1879 #endif
1880
1881 static const struct snd_soc_component_driver soc_component_dev_wm8903 = {
1882 .resume = wm8903_resume,
1883 .set_bias_level = wm8903_set_bias_level,
1884 .seq_notifier = wm8903_seq_notifier,
1885 .controls = wm8903_snd_controls,
1886 .num_controls = ARRAY_SIZE(wm8903_snd_controls),
1887 .dapm_widgets = wm8903_dapm_widgets,
1888 .num_dapm_widgets = ARRAY_SIZE(wm8903_dapm_widgets),
1889 .dapm_routes = wm8903_intercon,
1890 .num_dapm_routes = ARRAY_SIZE(wm8903_intercon),
1891 .suspend_bias_off = 1,
1892 .idle_bias_on = 1,
1893 .use_pmdown_time = 1,
1894 .endianness = 1,
1895 };
1896
1897 static const struct regmap_config wm8903_regmap = {
1898 .reg_bits = 8,
1899 .val_bits = 16,
1900
1901 .max_register = WM8903_MAX_REGISTER,
1902 .volatile_reg = wm8903_volatile_register,
1903 .readable_reg = wm8903_readable_register,
1904
1905 .cache_type = REGCACHE_MAPLE,
1906 .reg_defaults = wm8903_reg_defaults,
1907 .num_reg_defaults = ARRAY_SIZE(wm8903_reg_defaults),
1908 };
1909
wm8903_set_pdata_irq_trigger(struct i2c_client * i2c,struct wm8903_platform_data * pdata)1910 static int wm8903_set_pdata_irq_trigger(struct i2c_client *i2c,
1911 struct wm8903_platform_data *pdata)
1912 {
1913 struct irq_data *irq_data = irq_get_irq_data(i2c->irq);
1914 if (!irq_data) {
1915 dev_err(&i2c->dev, "Invalid IRQ: %d\n",
1916 i2c->irq);
1917 return -EINVAL;
1918 }
1919
1920 switch (irqd_get_trigger_type(irq_data)) {
1921 case IRQ_TYPE_NONE:
1922 default:
1923 /*
1924 * We assume the controller imposes no restrictions,
1925 * so we are able to select active-high
1926 */
1927 fallthrough;
1928 case IRQ_TYPE_LEVEL_HIGH:
1929 pdata->irq_active_low = false;
1930 break;
1931 case IRQ_TYPE_LEVEL_LOW:
1932 pdata->irq_active_low = true;
1933 break;
1934 }
1935
1936 return 0;
1937 }
1938
wm8903_set_pdata_from_of(struct i2c_client * i2c,struct wm8903_platform_data * pdata)1939 static int wm8903_set_pdata_from_of(struct i2c_client *i2c,
1940 struct wm8903_platform_data *pdata)
1941 {
1942 const struct device_node *np = i2c->dev.of_node;
1943 u32 val32;
1944 int i;
1945
1946 if (of_property_read_u32(np, "micdet-cfg", &val32) >= 0)
1947 pdata->micdet_cfg = val32;
1948
1949 if (of_property_read_u32(np, "micdet-delay", &val32) >= 0)
1950 pdata->micdet_delay = val32;
1951
1952 if (of_property_read_u32_array(np, "gpio-cfg", pdata->gpio_cfg,
1953 ARRAY_SIZE(pdata->gpio_cfg)) >= 0) {
1954 /*
1955 * In device tree: 0 means "write 0",
1956 * 0xffffffff means "don't touch".
1957 *
1958 * In platform data: 0 means "don't touch",
1959 * 0x8000 means "write 0".
1960 *
1961 * Note: WM8903_GPIO_CONFIG_ZERO == 0x8000.
1962 *
1963 * Convert from DT to pdata representation here,
1964 * so no other code needs to change.
1965 */
1966 for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
1967 if (pdata->gpio_cfg[i] == 0) {
1968 pdata->gpio_cfg[i] = WM8903_GPIO_CONFIG_ZERO;
1969 } else if (pdata->gpio_cfg[i] == 0xffffffff) {
1970 pdata->gpio_cfg[i] = 0;
1971 } else if (pdata->gpio_cfg[i] > 0x7fff) {
1972 dev_err(&i2c->dev, "Invalid gpio-cfg[%d] %x\n",
1973 i, pdata->gpio_cfg[i]);
1974 return -EINVAL;
1975 }
1976 }
1977 }
1978
1979 return 0;
1980 }
1981
wm8903_i2c_probe(struct i2c_client * i2c)1982 static int wm8903_i2c_probe(struct i2c_client *i2c)
1983 {
1984 struct wm8903_platform_data *pdata = dev_get_platdata(&i2c->dev);
1985 struct wm8903_priv *wm8903;
1986 int trigger;
1987 bool mic_gpio = false;
1988 unsigned int val, irq_pol;
1989 int ret, i;
1990
1991 wm8903 = devm_kzalloc(&i2c->dev, sizeof(*wm8903), GFP_KERNEL);
1992 if (wm8903 == NULL)
1993 return -ENOMEM;
1994
1995 mutex_init(&wm8903->lock);
1996 wm8903->dev = &i2c->dev;
1997
1998 wm8903->regmap = devm_regmap_init_i2c(i2c, &wm8903_regmap);
1999 if (IS_ERR(wm8903->regmap)) {
2000 ret = PTR_ERR(wm8903->regmap);
2001 dev_err(&i2c->dev, "Failed to allocate register map: %d\n",
2002 ret);
2003 return ret;
2004 }
2005
2006 i2c_set_clientdata(i2c, wm8903);
2007
2008 /* If no platform data was supplied, create storage for defaults */
2009 if (pdata) {
2010 wm8903->pdata = pdata;
2011 } else {
2012 wm8903->pdata = devm_kzalloc(&i2c->dev, sizeof(*wm8903->pdata),
2013 GFP_KERNEL);
2014 if (!wm8903->pdata)
2015 return -ENOMEM;
2016
2017 if (i2c->irq) {
2018 ret = wm8903_set_pdata_irq_trigger(i2c, wm8903->pdata);
2019 if (ret != 0)
2020 return ret;
2021 }
2022
2023 if (i2c->dev.of_node) {
2024 ret = wm8903_set_pdata_from_of(i2c, wm8903->pdata);
2025 if (ret != 0)
2026 return ret;
2027 }
2028 }
2029
2030 pdata = wm8903->pdata;
2031
2032 for (i = 0; i < ARRAY_SIZE(wm8903->supplies); i++)
2033 wm8903->supplies[i].supply = wm8903_supply_names[i];
2034
2035 ret = devm_regulator_bulk_get(&i2c->dev, ARRAY_SIZE(wm8903->supplies),
2036 wm8903->supplies);
2037 if (ret != 0) {
2038 dev_err(&i2c->dev, "Failed to request supplies: %d\n", ret);
2039 return ret;
2040 }
2041
2042 ret = regulator_bulk_enable(ARRAY_SIZE(wm8903->supplies),
2043 wm8903->supplies);
2044 if (ret != 0) {
2045 dev_err(&i2c->dev, "Failed to enable supplies: %d\n", ret);
2046 return ret;
2047 }
2048
2049 ret = regmap_read(wm8903->regmap, WM8903_SW_RESET_AND_ID, &val);
2050 if (ret != 0) {
2051 dev_err(&i2c->dev, "Failed to read chip ID: %d\n", ret);
2052 goto err;
2053 }
2054 if (val != 0x8903) {
2055 dev_err(&i2c->dev, "Device with ID %x is not a WM8903\n", val);
2056 ret = -ENODEV;
2057 goto err;
2058 }
2059
2060 ret = regmap_read(wm8903->regmap, WM8903_REVISION_NUMBER, &val);
2061 if (ret != 0) {
2062 dev_err(&i2c->dev, "Failed to read chip revision: %d\n", ret);
2063 goto err;
2064 }
2065 dev_info(&i2c->dev, "WM8903 revision %c\n",
2066 (val & WM8903_CHIP_REV_MASK) + 'A');
2067
2068 /* Reset the device */
2069 regmap_write(wm8903->regmap, WM8903_SW_RESET_AND_ID, 0x8903);
2070
2071 wm8903_init_gpio(wm8903);
2072
2073 /* Set up GPIO pin state, detect if any are MIC detect outputs */
2074 for (i = 0; i < ARRAY_SIZE(pdata->gpio_cfg); i++) {
2075 if ((!pdata->gpio_cfg[i]) ||
2076 (pdata->gpio_cfg[i] > WM8903_GPIO_CONFIG_ZERO))
2077 continue;
2078
2079 regmap_write(wm8903->regmap, WM8903_GPIO_CONTROL_1 + i,
2080 pdata->gpio_cfg[i] & 0x7fff);
2081
2082 val = (pdata->gpio_cfg[i] & WM8903_GP1_FN_MASK)
2083 >> WM8903_GP1_FN_SHIFT;
2084
2085 switch (val) {
2086 case WM8903_GPn_FN_MICBIAS_CURRENT_DETECT:
2087 case WM8903_GPn_FN_MICBIAS_SHORT_DETECT:
2088 mic_gpio = true;
2089 break;
2090 default:
2091 break;
2092 }
2093 }
2094
2095 /* Set up microphone detection */
2096 regmap_write(wm8903->regmap, WM8903_MIC_BIAS_CONTROL_0,
2097 pdata->micdet_cfg);
2098
2099 /* Microphone detection needs the WSEQ clock */
2100 if (pdata->micdet_cfg)
2101 regmap_update_bits(wm8903->regmap, WM8903_WRITE_SEQUENCER_0,
2102 WM8903_WSEQ_ENA, WM8903_WSEQ_ENA);
2103
2104 /* If microphone detection is enabled by pdata but
2105 * detected via IRQ then interrupts can be lost before
2106 * the machine driver has set up microphone detection
2107 * IRQs as the IRQs are clear on read. The detection
2108 * will be enabled when the machine driver configures.
2109 */
2110 WARN_ON(!mic_gpio && (pdata->micdet_cfg & WM8903_MICDET_ENA));
2111
2112 wm8903->mic_delay = pdata->micdet_delay;
2113
2114 if (i2c->irq) {
2115 if (pdata->irq_active_low) {
2116 trigger = IRQF_TRIGGER_LOW;
2117 irq_pol = WM8903_IRQ_POL;
2118 } else {
2119 trigger = IRQF_TRIGGER_HIGH;
2120 irq_pol = 0;
2121 }
2122
2123 regmap_update_bits(wm8903->regmap, WM8903_INTERRUPT_CONTROL,
2124 WM8903_IRQ_POL, irq_pol);
2125
2126 ret = request_threaded_irq(i2c->irq, NULL, wm8903_irq,
2127 trigger | IRQF_ONESHOT,
2128 "wm8903", wm8903);
2129 if (ret != 0) {
2130 dev_err(wm8903->dev, "Failed to request IRQ: %d\n",
2131 ret);
2132 goto err;
2133 }
2134
2135 /* Enable write sequencer interrupts */
2136 regmap_update_bits(wm8903->regmap,
2137 WM8903_INTERRUPT_STATUS_1_MASK,
2138 WM8903_IM_WSEQ_BUSY_EINT, 0);
2139 }
2140
2141 /* Latch volume update bits */
2142 regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_LEFT,
2143 WM8903_ADCVU, WM8903_ADCVU);
2144 regmap_update_bits(wm8903->regmap, WM8903_ADC_DIGITAL_VOLUME_RIGHT,
2145 WM8903_ADCVU, WM8903_ADCVU);
2146
2147 regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_LEFT,
2148 WM8903_DACVU, WM8903_DACVU);
2149 regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_VOLUME_RIGHT,
2150 WM8903_DACVU, WM8903_DACVU);
2151
2152 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_LEFT,
2153 WM8903_HPOUTVU, WM8903_HPOUTVU);
2154 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT1_RIGHT,
2155 WM8903_HPOUTVU, WM8903_HPOUTVU);
2156
2157 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_LEFT,
2158 WM8903_LINEOUTVU, WM8903_LINEOUTVU);
2159 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT2_RIGHT,
2160 WM8903_LINEOUTVU, WM8903_LINEOUTVU);
2161
2162 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_LEFT,
2163 WM8903_SPKVU, WM8903_SPKVU);
2164 regmap_update_bits(wm8903->regmap, WM8903_ANALOGUE_OUT3_RIGHT,
2165 WM8903_SPKVU, WM8903_SPKVU);
2166
2167 /* Enable DAC soft mute by default */
2168 regmap_update_bits(wm8903->regmap, WM8903_DAC_DIGITAL_1,
2169 WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE,
2170 WM8903_DAC_MUTEMODE | WM8903_DAC_MUTE);
2171
2172 ret = devm_snd_soc_register_component(&i2c->dev,
2173 &soc_component_dev_wm8903, &wm8903_dai, 1);
2174 if (ret != 0)
2175 goto err;
2176
2177 return 0;
2178 err:
2179 regulator_bulk_disable(ARRAY_SIZE(wm8903->supplies),
2180 wm8903->supplies);
2181 return ret;
2182 }
2183
wm8903_i2c_remove(struct i2c_client * client)2184 static void wm8903_i2c_remove(struct i2c_client *client)
2185 {
2186 struct wm8903_priv *wm8903 = i2c_get_clientdata(client);
2187
2188 regulator_bulk_disable(ARRAY_SIZE(wm8903->supplies),
2189 wm8903->supplies);
2190 if (client->irq)
2191 free_irq(client->irq, wm8903);
2192 wm8903_free_gpio(wm8903);
2193 }
2194
2195 static const struct of_device_id wm8903_of_match[] = {
2196 { .compatible = "wlf,wm8903", },
2197 {},
2198 };
2199 MODULE_DEVICE_TABLE(of, wm8903_of_match);
2200
2201 static const struct i2c_device_id wm8903_i2c_id[] = {
2202 { "wm8903" },
2203 { }
2204 };
2205 MODULE_DEVICE_TABLE(i2c, wm8903_i2c_id);
2206
2207 static struct i2c_driver wm8903_i2c_driver = {
2208 .driver = {
2209 .name = "wm8903",
2210 .of_match_table = wm8903_of_match,
2211 },
2212 .probe = wm8903_i2c_probe,
2213 .remove = wm8903_i2c_remove,
2214 .id_table = wm8903_i2c_id,
2215 };
2216
2217 module_i2c_driver(wm8903_i2c_driver);
2218
2219 MODULE_DESCRIPTION("ASoC WM8903 driver");
2220 MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.cm>");
2221 MODULE_LICENSE("GPL");
2222