1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Driver for Digigram VX soundcards
4 *
5 * Hardware core part
6 *
7 * Copyright (c) 2002 by Takashi Iwai <tiwai@suse.de>
8 */
9
10 #include <linux/delay.h>
11 #include <linux/slab.h>
12 #include <linux/interrupt.h>
13 #include <linux/init.h>
14 #include <linux/device.h>
15 #include <linux/firmware.h>
16 #include <linux/module.h>
17 #include <linux/io.h>
18 #include <sound/core.h>
19 #include <sound/pcm.h>
20 #include <sound/asoundef.h>
21 #include <sound/info.h>
22 #include <sound/vx_core.h>
23 #include "vx_cmd.h"
24
25 MODULE_AUTHOR("Takashi Iwai <tiwai@suse.de>");
26 MODULE_DESCRIPTION("Common routines for Digigram VX drivers");
27 MODULE_LICENSE("GPL");
28
29
30 /*
31 * vx_check_reg_bit - wait for the specified bit is set/reset on a register
32 * @reg: register to check
33 * @mask: bit mask
34 * @bit: resultant bit to be checked
35 * @time: time-out of loop in msec
36 *
37 * returns zero if a bit matches, or a negative error code.
38 */
snd_vx_check_reg_bit(struct vx_core * chip,int reg,int mask,int bit,int time)39 int snd_vx_check_reg_bit(struct vx_core *chip, int reg, int mask, int bit, int time)
40 {
41 unsigned long end_time = jiffies + (time * HZ + 999) / 1000;
42 static const char * const reg_names[VX_REG_MAX] = {
43 "ICR", "CVR", "ISR", "IVR", "RXH", "RXM", "RXL",
44 "DMA", "CDSP", "RFREQ", "RUER/V2", "DATA", "MEMIRQ",
45 "ACQ", "BIT0", "BIT1", "MIC0", "MIC1", "MIC2",
46 "MIC3", "INTCSR", "CNTRL", "GPIOC",
47 "LOFREQ", "HIFREQ", "CSUER", "RUER"
48 };
49
50 do {
51 if ((snd_vx_inb(chip, reg) & mask) == bit)
52 return 0;
53 //msleep(10);
54 } while (time_after_eq(end_time, jiffies));
55 dev_dbg(chip->card->dev,
56 "vx_check_reg_bit: timeout, reg=%s, mask=0x%x, val=0x%x\n",
57 reg_names[reg], mask, snd_vx_inb(chip, reg));
58 return -EIO;
59 }
60
61 EXPORT_SYMBOL(snd_vx_check_reg_bit);
62
63 /*
64 * vx_send_irq_dsp - set command irq bit
65 * @num: the requested IRQ type, IRQ_XXX
66 *
67 * this triggers the specified IRQ request
68 * returns 0 if successful, or a negative error code.
69 *
70 */
vx_send_irq_dsp(struct vx_core * chip,int num)71 static int vx_send_irq_dsp(struct vx_core *chip, int num)
72 {
73 int nirq;
74
75 /* wait for Hc = 0 */
76 if (snd_vx_check_reg_bit(chip, VX_CVR, CVR_HC, 0, 200) < 0)
77 return -EIO;
78
79 nirq = num;
80 if (vx_has_new_dsp(chip))
81 nirq += VXP_IRQ_OFFSET;
82 vx_outb(chip, CVR, (nirq >> 1) | CVR_HC);
83 return 0;
84 }
85
86
87 /*
88 * vx_reset_chk - reset CHK bit on ISR
89 *
90 * returns 0 if successful, or a negative error code.
91 */
vx_reset_chk(struct vx_core * chip)92 static int vx_reset_chk(struct vx_core *chip)
93 {
94 /* Reset irq CHK */
95 if (vx_send_irq_dsp(chip, IRQ_RESET_CHK) < 0)
96 return -EIO;
97 /* Wait until CHK = 0 */
98 if (vx_check_isr(chip, ISR_CHK, 0, 200) < 0)
99 return -EIO;
100 return 0;
101 }
102
103 /*
104 * vx_transfer_end - terminate message transfer
105 * @cmd: IRQ message to send (IRQ_MESS_XXX_END)
106 *
107 * returns 0 if successful, or a negative error code.
108 * the error code can be VX-specific, retrieved via vx_get_error().
109 * NB: call with mutex held!
110 */
vx_transfer_end(struct vx_core * chip,int cmd)111 static int vx_transfer_end(struct vx_core *chip, int cmd)
112 {
113 int err;
114
115 err = vx_reset_chk(chip);
116 if (err < 0)
117 return err;
118
119 /* irq MESS_READ/WRITE_END */
120 err = vx_send_irq_dsp(chip, cmd);
121 if (err < 0)
122 return err;
123
124 /* Wait CHK = 1 */
125 err = vx_wait_isr_bit(chip, ISR_CHK);
126 if (err < 0)
127 return err;
128
129 /* If error, Read RX */
130 err = vx_inb(chip, ISR);
131 if (err & ISR_ERR) {
132 err = vx_wait_for_rx_full(chip);
133 if (err < 0) {
134 dev_dbg(chip->card->dev,
135 "transfer_end: error in rx_full\n");
136 return err;
137 }
138 err = vx_inb(chip, RXH) << 16;
139 err |= vx_inb(chip, RXM) << 8;
140 err |= vx_inb(chip, RXL);
141 dev_dbg(chip->card->dev, "transfer_end: error = 0x%x\n", err);
142 return -(VX_ERR_MASK | err);
143 }
144 return 0;
145 }
146
147 /*
148 * vx_read_status - return the status rmh
149 * @rmh: rmh record to store the status
150 *
151 * returns 0 if successful, or a negative error code.
152 * the error code can be VX-specific, retrieved via vx_get_error().
153 * NB: call with mutex held!
154 */
vx_read_status(struct vx_core * chip,struct vx_rmh * rmh)155 static int vx_read_status(struct vx_core *chip, struct vx_rmh *rmh)
156 {
157 int i, err, val, size;
158
159 /* no read necessary? */
160 if (rmh->DspStat == RMH_SSIZE_FIXED && rmh->LgStat == 0)
161 return 0;
162
163 /* Wait for RX full (with timeout protection)
164 * The first word of status is in RX
165 */
166 err = vx_wait_for_rx_full(chip);
167 if (err < 0)
168 return err;
169
170 /* Read RX */
171 val = vx_inb(chip, RXH) << 16;
172 val |= vx_inb(chip, RXM) << 8;
173 val |= vx_inb(chip, RXL);
174
175 /* If status given by DSP, let's decode its size */
176 switch (rmh->DspStat) {
177 case RMH_SSIZE_ARG:
178 size = val & 0xff;
179 rmh->Stat[0] = val & 0xffff00;
180 rmh->LgStat = size + 1;
181 break;
182 case RMH_SSIZE_MASK:
183 /* Let's count the arg numbers from a mask */
184 rmh->Stat[0] = val;
185 size = 0;
186 while (val) {
187 if (val & 0x01)
188 size++;
189 val >>= 1;
190 }
191 rmh->LgStat = size + 1;
192 break;
193 default:
194 /* else retrieve the status length given by the driver */
195 size = rmh->LgStat;
196 rmh->Stat[0] = val; /* Val is the status 1st word */
197 size--; /* hence adjust remaining length */
198 break;
199 }
200
201 if (size < 1)
202 return 0;
203 if (snd_BUG_ON(size >= SIZE_MAX_STATUS))
204 return -EINVAL;
205
206 for (i = 1; i <= size; i++) {
207 /* trigger an irq MESS_WRITE_NEXT */
208 err = vx_send_irq_dsp(chip, IRQ_MESS_WRITE_NEXT);
209 if (err < 0)
210 return err;
211 /* Wait for RX full (with timeout protection) */
212 err = vx_wait_for_rx_full(chip);
213 if (err < 0)
214 return err;
215 rmh->Stat[i] = vx_inb(chip, RXH) << 16;
216 rmh->Stat[i] |= vx_inb(chip, RXM) << 8;
217 rmh->Stat[i] |= vx_inb(chip, RXL);
218 }
219
220 return vx_transfer_end(chip, IRQ_MESS_WRITE_END);
221 }
222
223
224 #define MASK_MORE_THAN_1_WORD_COMMAND 0x00008000
225 #define MASK_1_WORD_COMMAND 0x00ff7fff
226
227 /*
228 * vx_send_msg_nolock - send a DSP message and read back the status
229 * @rmh: the rmh record to send and receive
230 *
231 * returns 0 if successful, or a negative error code.
232 * the error code can be VX-specific, retrieved via vx_get_error().
233 *
234 * this function doesn't call mutex lock at all.
235 */
vx_send_msg_nolock(struct vx_core * chip,struct vx_rmh * rmh)236 int vx_send_msg_nolock(struct vx_core *chip, struct vx_rmh *rmh)
237 {
238 int i, err;
239
240 if (chip->chip_status & VX_STAT_IS_STALE)
241 return -EBUSY;
242
243 err = vx_reset_chk(chip);
244 if (err < 0) {
245 dev_dbg(chip->card->dev, "vx_send_msg: vx_reset_chk error\n");
246 return err;
247 }
248
249 /* Check bit M is set according to length of the command */
250 if (rmh->LgCmd > 1)
251 rmh->Cmd[0] |= MASK_MORE_THAN_1_WORD_COMMAND;
252 else
253 rmh->Cmd[0] &= MASK_1_WORD_COMMAND;
254
255 /* Wait for TX empty */
256 err = vx_wait_isr_bit(chip, ISR_TX_EMPTY);
257 if (err < 0) {
258 dev_dbg(chip->card->dev, "vx_send_msg: wait tx empty error\n");
259 return err;
260 }
261
262 /* Write Cmd[0] */
263 vx_outb(chip, TXH, (rmh->Cmd[0] >> 16) & 0xff);
264 vx_outb(chip, TXM, (rmh->Cmd[0] >> 8) & 0xff);
265 vx_outb(chip, TXL, rmh->Cmd[0] & 0xff);
266
267 /* Trigger irq MESSAGE */
268 err = vx_send_irq_dsp(chip, IRQ_MESSAGE);
269 if (err < 0) {
270 dev_dbg(chip->card->dev,
271 "vx_send_msg: send IRQ_MESSAGE error\n");
272 return err;
273 }
274
275 /* Wait for CHK = 1 */
276 err = vx_wait_isr_bit(chip, ISR_CHK);
277 if (err < 0)
278 return err;
279
280 /* If error, get error value from RX */
281 if (vx_inb(chip, ISR) & ISR_ERR) {
282 err = vx_wait_for_rx_full(chip);
283 if (err < 0) {
284 dev_dbg(chip->card->dev,
285 "vx_send_msg: rx_full read error\n");
286 return err;
287 }
288 err = vx_inb(chip, RXH) << 16;
289 err |= vx_inb(chip, RXM) << 8;
290 err |= vx_inb(chip, RXL);
291 dev_dbg(chip->card->dev,
292 "msg got error = 0x%x at cmd[0]\n", err);
293 err = -(VX_ERR_MASK | err);
294 return err;
295 }
296
297 /* Send the other words */
298 if (rmh->LgCmd > 1) {
299 for (i = 1; i < rmh->LgCmd; i++) {
300 /* Wait for TX ready */
301 err = vx_wait_isr_bit(chip, ISR_TX_READY);
302 if (err < 0) {
303 dev_dbg(chip->card->dev,
304 "vx_send_msg: tx_ready error\n");
305 return err;
306 }
307
308 /* Write Cmd[i] */
309 vx_outb(chip, TXH, (rmh->Cmd[i] >> 16) & 0xff);
310 vx_outb(chip, TXM, (rmh->Cmd[i] >> 8) & 0xff);
311 vx_outb(chip, TXL, rmh->Cmd[i] & 0xff);
312
313 /* Trigger irq MESS_READ_NEXT */
314 err = vx_send_irq_dsp(chip, IRQ_MESS_READ_NEXT);
315 if (err < 0) {
316 dev_dbg(chip->card->dev,
317 "vx_send_msg: IRQ_READ_NEXT error\n");
318 return err;
319 }
320 }
321 /* Wait for TX empty */
322 err = vx_wait_isr_bit(chip, ISR_TX_READY);
323 if (err < 0) {
324 dev_dbg(chip->card->dev,
325 "vx_send_msg: TX_READY error\n");
326 return err;
327 }
328 /* End of transfer */
329 err = vx_transfer_end(chip, IRQ_MESS_READ_END);
330 if (err < 0)
331 return err;
332 }
333
334 return vx_read_status(chip, rmh);
335 }
336
337
338 /*
339 * vx_send_msg - send a DSP message with mutex
340 * @rmh: the rmh record to send and receive
341 *
342 * returns 0 if successful, or a negative error code.
343 * see vx_send_msg_nolock().
344 */
vx_send_msg(struct vx_core * chip,struct vx_rmh * rmh)345 int vx_send_msg(struct vx_core *chip, struct vx_rmh *rmh)
346 {
347 int err;
348
349 mutex_lock(&chip->lock);
350 err = vx_send_msg_nolock(chip, rmh);
351 mutex_unlock(&chip->lock);
352 return err;
353 }
354
355
356 /*
357 * vx_send_rih_nolock - send an RIH to xilinx
358 * @cmd: the command to send
359 *
360 * returns 0 if successful, or a negative error code.
361 * the error code can be VX-specific, retrieved via vx_get_error().
362 *
363 * this function doesn't call mutex at all.
364 *
365 * unlike RMH, no command is sent to DSP.
366 */
vx_send_rih_nolock(struct vx_core * chip,int cmd)367 int vx_send_rih_nolock(struct vx_core *chip, int cmd)
368 {
369 int err;
370
371 if (chip->chip_status & VX_STAT_IS_STALE)
372 return -EBUSY;
373
374 err = vx_reset_chk(chip);
375 if (err < 0)
376 return err;
377 /* send the IRQ */
378 err = vx_send_irq_dsp(chip, cmd);
379 if (err < 0)
380 return err;
381 /* Wait CHK = 1 */
382 err = vx_wait_isr_bit(chip, ISR_CHK);
383 if (err < 0)
384 return err;
385 /* If error, read RX */
386 if (vx_inb(chip, ISR) & ISR_ERR) {
387 err = vx_wait_for_rx_full(chip);
388 if (err < 0)
389 return err;
390 err = vx_inb(chip, RXH) << 16;
391 err |= vx_inb(chip, RXM) << 8;
392 err |= vx_inb(chip, RXL);
393 return -(VX_ERR_MASK | err);
394 }
395 return 0;
396 }
397
398
399 /*
400 * vx_send_rih - send an RIH with mutex
401 * @cmd: the command to send
402 *
403 * see vx_send_rih_nolock().
404 */
vx_send_rih(struct vx_core * chip,int cmd)405 int vx_send_rih(struct vx_core *chip, int cmd)
406 {
407 int err;
408
409 mutex_lock(&chip->lock);
410 err = vx_send_rih_nolock(chip, cmd);
411 mutex_unlock(&chip->lock);
412 return err;
413 }
414
415 #define END_OF_RESET_WAIT_TIME 500 /* us */
416
417 /**
418 * snd_vx_load_boot_image - boot up the xilinx interface
419 * @chip: VX core instance
420 * @boot: the boot record to load
421 */
snd_vx_load_boot_image(struct vx_core * chip,const struct firmware * boot)422 int snd_vx_load_boot_image(struct vx_core *chip, const struct firmware *boot)
423 {
424 unsigned int i;
425 int no_fillup = vx_has_new_dsp(chip);
426
427 /* check the length of boot image */
428 if (boot->size <= 0)
429 return -EINVAL;
430 if (boot->size % 3)
431 return -EINVAL;
432 #if 0
433 {
434 /* more strict check */
435 unsigned int c = ((u32)boot->data[0] << 16) | ((u32)boot->data[1] << 8) | boot->data[2];
436 if (boot->size != (c + 2) * 3)
437 return -EINVAL;
438 }
439 #endif
440
441 /* reset dsp */
442 vx_reset_dsp(chip);
443
444 udelay(END_OF_RESET_WAIT_TIME); /* another wait? */
445
446 /* download boot strap */
447 for (i = 0; i < 0x600; i += 3) {
448 if (i >= boot->size) {
449 if (no_fillup)
450 break;
451 if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
452 dev_err(chip->card->dev, "dsp boot failed at %d\n", i);
453 return -EIO;
454 }
455 vx_outb(chip, TXH, 0);
456 vx_outb(chip, TXM, 0);
457 vx_outb(chip, TXL, 0);
458 } else {
459 const unsigned char *image = boot->data + i;
460 if (vx_wait_isr_bit(chip, ISR_TX_EMPTY) < 0) {
461 dev_err(chip->card->dev, "dsp boot failed at %d\n", i);
462 return -EIO;
463 }
464 vx_outb(chip, TXH, image[0]);
465 vx_outb(chip, TXM, image[1]);
466 vx_outb(chip, TXL, image[2]);
467 }
468 }
469 return 0;
470 }
471
472 EXPORT_SYMBOL(snd_vx_load_boot_image);
473
474 /*
475 * vx_test_irq_src - query the source of interrupts
476 *
477 * called from irq handler only
478 */
vx_test_irq_src(struct vx_core * chip,unsigned int * ret)479 static int vx_test_irq_src(struct vx_core *chip, unsigned int *ret)
480 {
481 int err;
482
483 vx_init_rmh(&chip->irq_rmh, CMD_TEST_IT);
484 mutex_lock(&chip->lock);
485 err = vx_send_msg_nolock(chip, &chip->irq_rmh);
486 if (err < 0)
487 *ret = 0;
488 else
489 *ret = chip->irq_rmh.Stat[0];
490 mutex_unlock(&chip->lock);
491 return err;
492 }
493
494
495 /*
496 * snd_vx_threaded_irq_handler - threaded irq handler
497 */
snd_vx_threaded_irq_handler(int irq,void * dev)498 irqreturn_t snd_vx_threaded_irq_handler(int irq, void *dev)
499 {
500 struct vx_core *chip = dev;
501 unsigned int events;
502
503 if (chip->chip_status & VX_STAT_IS_STALE)
504 return IRQ_HANDLED;
505
506 if (vx_test_irq_src(chip, &events) < 0)
507 return IRQ_HANDLED;
508
509 /* We must prevent any application using this DSP
510 * and block any further request until the application
511 * either unregisters or reloads the DSP
512 */
513 if (events & FATAL_DSP_ERROR) {
514 dev_err(chip->card->dev, "vx_core: fatal DSP error!!\n");
515 return IRQ_HANDLED;
516 }
517
518 /* The start on time code conditions are filled (ie the time code
519 * received by the board is equal to one of those given to it).
520 */
521 if (events & TIME_CODE_EVENT_PENDING) {
522 ; /* so far, nothing to do yet */
523 }
524
525 /* The frequency has changed on the board (UER mode). */
526 if (events & FREQUENCY_CHANGE_EVENT_PENDING)
527 vx_change_frequency(chip);
528
529 /* update the pcm streams */
530 vx_pcm_update_intr(chip, events);
531 return IRQ_HANDLED;
532 }
533 EXPORT_SYMBOL(snd_vx_threaded_irq_handler);
534
535 /**
536 * snd_vx_irq_handler - interrupt handler
537 * @irq: irq number
538 * @dev: VX core instance
539 */
snd_vx_irq_handler(int irq,void * dev)540 irqreturn_t snd_vx_irq_handler(int irq, void *dev)
541 {
542 struct vx_core *chip = dev;
543
544 if (! (chip->chip_status & VX_STAT_CHIP_INIT) ||
545 (chip->chip_status & VX_STAT_IS_STALE))
546 return IRQ_NONE;
547 if (! vx_test_and_ack(chip))
548 return IRQ_WAKE_THREAD;
549 return IRQ_NONE;
550 }
551
552 EXPORT_SYMBOL(snd_vx_irq_handler);
553
554 /*
555 */
vx_reset_board(struct vx_core * chip,int cold_reset)556 static void vx_reset_board(struct vx_core *chip, int cold_reset)
557 {
558 if (snd_BUG_ON(!chip->ops->reset_board))
559 return;
560
561 /* current source, later sync'ed with target */
562 chip->audio_source = VX_AUDIO_SRC_LINE;
563 if (cold_reset) {
564 chip->audio_source_target = chip->audio_source;
565 chip->clock_source = INTERNAL_QUARTZ;
566 chip->clock_mode = VX_CLOCK_MODE_AUTO;
567 chip->freq = 48000;
568 chip->uer_detected = VX_UER_MODE_NOT_PRESENT;
569 chip->uer_bits = SNDRV_PCM_DEFAULT_CON_SPDIF;
570 }
571
572 chip->ops->reset_board(chip, cold_reset);
573
574 vx_reset_codec(chip, cold_reset);
575
576 vx_set_internal_clock(chip, chip->freq);
577
578 /* Reset the DSP */
579 vx_reset_dsp(chip);
580
581 if (vx_is_pcmcia(chip)) {
582 /* Acknowledge any pending IRQ and reset the MEMIRQ flag. */
583 vx_test_and_ack(chip);
584 vx_validate_irq(chip, 1);
585 }
586
587 /* init CBits */
588 vx_set_iec958_status(chip, chip->uer_bits);
589 }
590
591
592 /*
593 * proc interface
594 */
595
vx_proc_read(struct snd_info_entry * entry,struct snd_info_buffer * buffer)596 static void vx_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
597 {
598 struct vx_core *chip = entry->private_data;
599 static const char * const audio_src_vxp[] = { "Line", "Mic", "Digital" };
600 static const char * const audio_src_vx2[] = { "Analog", "Analog", "Digital" };
601 static const char * const clock_mode[] = { "Auto", "Internal", "External" };
602 static const char * const clock_src[] = { "Internal", "External" };
603 static const char * const uer_type[] = { "Consumer", "Professional", "Not Present" };
604
605 snd_iprintf(buffer, "%s\n", chip->card->longname);
606 snd_iprintf(buffer, "Xilinx Firmware: %s\n",
607 (chip->chip_status & VX_STAT_XILINX_LOADED) ? "Loaded" : "No");
608 snd_iprintf(buffer, "Device Initialized: %s\n",
609 (chip->chip_status & VX_STAT_DEVICE_INIT) ? "Yes" : "No");
610 snd_iprintf(buffer, "DSP audio info:");
611 if (chip->audio_info & VX_AUDIO_INFO_REAL_TIME)
612 snd_iprintf(buffer, " realtime");
613 if (chip->audio_info & VX_AUDIO_INFO_OFFLINE)
614 snd_iprintf(buffer, " offline");
615 if (chip->audio_info & VX_AUDIO_INFO_MPEG1)
616 snd_iprintf(buffer, " mpeg1");
617 if (chip->audio_info & VX_AUDIO_INFO_MPEG2)
618 snd_iprintf(buffer, " mpeg2");
619 if (chip->audio_info & VX_AUDIO_INFO_LINEAR_8)
620 snd_iprintf(buffer, " linear8");
621 if (chip->audio_info & VX_AUDIO_INFO_LINEAR_16)
622 snd_iprintf(buffer, " linear16");
623 if (chip->audio_info & VX_AUDIO_INFO_LINEAR_24)
624 snd_iprintf(buffer, " linear24");
625 snd_iprintf(buffer, "\n");
626 snd_iprintf(buffer, "Input Source: %s\n", vx_is_pcmcia(chip) ?
627 audio_src_vxp[chip->audio_source] :
628 audio_src_vx2[chip->audio_source]);
629 snd_iprintf(buffer, "Clock Mode: %s\n", clock_mode[chip->clock_mode]);
630 snd_iprintf(buffer, "Clock Source: %s\n", clock_src[chip->clock_source]);
631 snd_iprintf(buffer, "Frequency: %d\n", chip->freq);
632 snd_iprintf(buffer, "Detected Frequency: %d\n", chip->freq_detected);
633 snd_iprintf(buffer, "Detected UER type: %s\n", uer_type[chip->uer_detected]);
634 snd_iprintf(buffer, "Min/Max/Cur IBL: %d/%d/%d (granularity=%d)\n",
635 chip->ibl.min_size, chip->ibl.max_size, chip->ibl.size,
636 chip->ibl.granularity);
637 }
638
vx_proc_init(struct vx_core * chip)639 static void vx_proc_init(struct vx_core *chip)
640 {
641 snd_card_ro_proc_new(chip->card, "vx-status", chip, vx_proc_read);
642 }
643
644
645 /**
646 * snd_vx_dsp_boot - load the DSP boot
647 * @chip: VX core instance
648 * @boot: firmware data
649 */
snd_vx_dsp_boot(struct vx_core * chip,const struct firmware * boot)650 int snd_vx_dsp_boot(struct vx_core *chip, const struct firmware *boot)
651 {
652 int err;
653 int cold_reset = !(chip->chip_status & VX_STAT_DEVICE_INIT);
654
655 vx_reset_board(chip, cold_reset);
656 vx_validate_irq(chip, 0);
657
658 err = snd_vx_load_boot_image(chip, boot);
659 if (err < 0)
660 return err;
661 msleep(10);
662
663 return 0;
664 }
665
666 EXPORT_SYMBOL(snd_vx_dsp_boot);
667
668 /**
669 * snd_vx_dsp_load - load the DSP image
670 * @chip: VX core instance
671 * @dsp: firmware data
672 */
snd_vx_dsp_load(struct vx_core * chip,const struct firmware * dsp)673 int snd_vx_dsp_load(struct vx_core *chip, const struct firmware *dsp)
674 {
675 unsigned int i;
676 int err;
677 unsigned int csum = 0;
678 const unsigned char *image, *cptr;
679
680 if (dsp->size % 3)
681 return -EINVAL;
682
683 vx_toggle_dac_mute(chip, 1);
684
685 /* Transfert data buffer from PC to DSP */
686 for (i = 0; i < dsp->size; i += 3) {
687 image = dsp->data + i;
688 /* Wait DSP ready for a new read */
689 err = vx_wait_isr_bit(chip, ISR_TX_EMPTY);
690 if (err < 0) {
691 dev_err(chip->card->dev,
692 "dsp loading error at position %d\n", i);
693 return err;
694 }
695 cptr = image;
696 csum ^= *cptr;
697 csum = (csum >> 24) | (csum << 8);
698 vx_outb(chip, TXH, *cptr++);
699 csum ^= *cptr;
700 csum = (csum >> 24) | (csum << 8);
701 vx_outb(chip, TXM, *cptr++);
702 csum ^= *cptr;
703 csum = (csum >> 24) | (csum << 8);
704 vx_outb(chip, TXL, *cptr++);
705 }
706
707 msleep(200);
708
709 err = vx_wait_isr_bit(chip, ISR_CHK);
710 if (err < 0)
711 return err;
712
713 vx_toggle_dac_mute(chip, 0);
714
715 vx_test_and_ack(chip);
716 vx_validate_irq(chip, 1);
717
718 return 0;
719 }
720
721 EXPORT_SYMBOL(snd_vx_dsp_load);
722
723 #ifdef CONFIG_PM
724 /*
725 * suspend
726 */
snd_vx_suspend(struct vx_core * chip)727 int snd_vx_suspend(struct vx_core *chip)
728 {
729 snd_power_change_state(chip->card, SNDRV_CTL_POWER_D3hot);
730 chip->chip_status |= VX_STAT_IN_SUSPEND;
731
732 return 0;
733 }
734
735 EXPORT_SYMBOL(snd_vx_suspend);
736
737 /*
738 * resume
739 */
snd_vx_resume(struct vx_core * chip)740 int snd_vx_resume(struct vx_core *chip)
741 {
742 int i, err;
743
744 chip->chip_status &= ~VX_STAT_CHIP_INIT;
745
746 for (i = 0; i < 4; i++) {
747 if (! chip->firmware[i])
748 continue;
749 err = chip->ops->load_dsp(chip, i, chip->firmware[i]);
750 if (err < 0) {
751 dev_err(chip->card->dev,
752 "vx: firmware resume error at DSP %d\n", i);
753 return -EIO;
754 }
755 }
756
757 chip->chip_status |= VX_STAT_CHIP_INIT;
758 chip->chip_status &= ~VX_STAT_IN_SUSPEND;
759
760 snd_power_change_state(chip->card, SNDRV_CTL_POWER_D0);
761 return 0;
762 }
763
764 EXPORT_SYMBOL(snd_vx_resume);
765 #endif
766
snd_vx_release(struct device * dev,void * data)767 static void snd_vx_release(struct device *dev, void *data)
768 {
769 snd_vx_free_firmware(data);
770 }
771
772 /**
773 * snd_vx_create - constructor for struct vx_core
774 * @card: card instance
775 * @hw: hardware specific record
776 * @ops: VX ops pointer
777 * @extra_size: extra byte size to allocate appending to chip
778 *
779 * this function allocates the instance and prepare for the hardware
780 * initialization.
781 *
782 * The object is managed via devres, and will be automatically released.
783 *
784 * return the instance pointer if successful, NULL in error.
785 */
snd_vx_create(struct snd_card * card,const struct snd_vx_hardware * hw,const struct snd_vx_ops * ops,int extra_size)786 struct vx_core *snd_vx_create(struct snd_card *card,
787 const struct snd_vx_hardware *hw,
788 const struct snd_vx_ops *ops,
789 int extra_size)
790 {
791 struct vx_core *chip;
792
793 if (snd_BUG_ON(!card || !hw || !ops))
794 return NULL;
795
796 chip = devres_alloc(snd_vx_release, sizeof(*chip) + extra_size,
797 GFP_KERNEL);
798 if (!chip)
799 return NULL;
800 mutex_init(&chip->lock);
801 chip->irq = -1;
802 chip->hw = hw;
803 chip->type = hw->type;
804 chip->ops = ops;
805 mutex_init(&chip->mixer_mutex);
806
807 chip->card = card;
808 card->private_data = chip;
809 strcpy(card->driver, hw->name);
810 sprintf(card->shortname, "Digigram %s", hw->name);
811
812 vx_proc_init(chip);
813
814 return chip;
815 }
816
817 EXPORT_SYMBOL(snd_vx_create);
818