1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright (c) Toradex 4 * 5 * Common device tree include for Toradex OV5640 CSI camera on Verdin CSI_1. 6 */ 7 8#include <dt-bindings/gpio/gpio.h> 9 10&{/} { 11 clk_ov5640_osc: ov5640-xclk { 12 compatible = "fixed-clock"; 13 #clock-cells = <0>; 14 }; 15 16 regulator_camera: regulator-camera { 17 compatible = "regulator-fixed"; 18 /* Verdin GPIO_8_CSI (SODIMM 222) - CAM_1_CON_PWRCTRL */ 19 gpio = <&main_gpio0 42 GPIO_ACTIVE_HIGH>; 20 enable-active-high; 21 regulator-name = "V_CSI"; 22 startup-delay-us = <5000>; 23 }; 24}; 25 26&csi0_port0 { 27 status = "okay"; 28 29 csi2rx0_in_sensor: endpoint { 30 remote-endpoint = <&csi2_cam0>; 31 bus-type = <4>; /* CSI2 DPHY */ 32 clock-lanes = <0>; 33 data-lanes = <1 2>; 34 }; 35}; 36 37&dphy0 { 38 status = "okay"; 39}; 40 41&main_i2c3 { 42 #address-cells = <1>; 43 #size-cells = <0>; 44 45 camera@3c { 46 compatible = "ovti,ov5640"; 47 reg = <0x3c>; 48 49 clocks = <&clk_ov5640_osc>; 50 clock-names = "xclk"; 51 AVDD-supply = <®ulator_camera>; 52 DOVDD-supply = <®ulator_camera>; 53 DVDD-supply = <®ulator_camera>; 54 /* Verdin GPIO_6 (SODIMM 218) - CAM_1_CON_PWRDWN */ 55 powerdown-gpios = <&main_gpio0 36 GPIO_ACTIVE_HIGH>; 56 /* Verdin GPIO_5 (SODIMM 216) - CAM_1_CON_RST */ 57 reset-gpios = <&main_gpio0 40 GPIO_ACTIVE_LOW>; 58 59 port { 60 csi2_cam0: endpoint { 61 remote-endpoint = <&csi2rx0_in_sensor>; 62 clock-lanes = <0>; 63 data-lanes = <1 2>; 64 }; 65 }; 66 }; 67}; 68 69&ti_csi2rx0 { 70 status = "okay"; 71}; 72