xref: /linux/scripts/dtc/include-prefixes/arm64/qcom/ipq8074.dtsi (revision 115e74a29b530d121891238e9551c4bcdf7b04b5)

// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2017, The Linux Foundation. All rights reserved.
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-ipq8074.h>

/ {
	#address-cells = <2>;
	#size-cells = <2>;

	model = "Qualcomm Technologies, Inc. IPQ8074";
	compatible = "qcom,ipq8074";
	interrupt-parent = <&intc>;

	clocks {
		sleep_clk: sleep_clk {
			compatible = "fixed-clock";
			clock-frequency = <32768>;
			#clock-cells = <0>;
		};

		xo: xo {
			compatible = "fixed-clock";
			clock-frequency = <19200000>;
			#clock-cells = <0>;
		};
	};

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			reg = <0x0>;
			next-level-cache = <&l2_0>;
			enable-method = "psci";
		};

		cpu1: cpu@1 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			enable-method = "psci";
			reg = <0x1>;
			next-level-cache = <&l2_0>;
		};

		cpu2: cpu@2 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			enable-method = "psci";
			reg = <0x2>;
			next-level-cache = <&l2_0>;
		};

		cpu3: cpu@3 {
			device_type = "cpu";
			compatible = "arm,cortex-a53";
			enable-method = "psci";
			reg = <0x3>;
			next-level-cache = <&l2_0>;
		};

		l2_0: l2-cache {
			compatible = "cache";
			cache-level = <2>;
			cache-unified;
		};
	};

	pmu {
		compatible = "arm,cortex-a53-pmu";
		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bootloader@4a600000 {
			reg = <0x0 0x4a600000 0x0 0x400000>;
			no-map;
		};

		sbl@4aa00000 {
			reg = <0x0 0x4aa00000 0x0 0x100000>;
			no-map;
		};

		smem@4ab00000 {
			compatible = "qcom,smem";
			reg = <0x0 0x4ab00000 0x0 0x100000>;
			no-map;

			hwlocks = <&tcsr_mutex 3>;
		};

		memory@4ac00000 {
			reg = <0x0 0x4ac00000 0x0 0x400000>;
			no-map;
		};
	};

	firmware {
		scm {
			compatible = "qcom,scm-ipq8074", "qcom,scm";
			qcom,dload-mode = <&tcsr 0x6100>;
		};
	};

	soc: soc@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		ranges = <0 0 0 0xffffffff>;
		compatible = "simple-bus";

		ssphy_1: phy@58000 {
			compatible = "qcom,ipq8074-qmp-usb3-phy";
			reg = <0x00058000 0x1000>;

			clocks = <&gcc GCC_USB1_AUX_CLK>,
				 <&xo>,
				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB1_PIPE_CLK>;
			clock-names = "aux",
				      "ref",
				      "cfg_ahb",
				      "pipe";
			clock-output-names = "usb3phy_1_cc_pipe_clk";
			#clock-cells = <0>;
			#phy-cells = <0>;

			resets = <&gcc GCC_USB1_PHY_BCR>,
				 <&gcc GCC_USB3PHY_1_PHY_BCR>;
			reset-names = "phy",
				      "phy_phy";

			status = "disabled";
		};

		qusb_phy_1: phy@59000 {
			compatible = "qcom,ipq8074-qusb2-phy";
			reg = <0x00059000 0x180>;
			#phy-cells = <0>;

			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
				 <&xo>;
			clock-names = "cfg_ahb", "ref";

			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
			status = "disabled";
		};

		ssphy_0: phy@78000 {
			compatible = "qcom,ipq8074-qmp-usb3-phy";
			reg = <0x00078000 0x1000>;

			clocks = <&gcc GCC_USB0_AUX_CLK>,
				 <&xo>,
				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB0_PIPE_CLK>;
			clock-names = "aux",
				      "ref",
				      "cfg_ahb",
				      "pipe";
			clock-output-names = "usb3phy_0_cc_pipe_clk";
			#clock-cells = <0>;
			#phy-cells = <0>;

			resets = <&gcc GCC_USB0_PHY_BCR>,
				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
			reset-names = "phy",
				      "phy_phy";

			status = "disabled";
		};

		qusb_phy_0: phy@79000 {
			compatible = "qcom,ipq8074-qusb2-phy";
			reg = <0x00079000 0x180>;
			#phy-cells = <0>;

			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
				 <&xo>;
			clock-names = "cfg_ahb", "ref";

			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
			status = "disabled";
		};

		pcie_qmp0: phy@84000 {
			compatible = "qcom,ipq8074-qmp-gen3-pcie-phy";
			reg = <0x00084000 0x1000>;

			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
				 <&gcc GCC_PCIE0_AHB_CLK>,
				 <&gcc GCC_PCIE0_PIPE_CLK>;
			clock-names = "aux",
				      "cfg_ahb",
				      "pipe";

			clock-output-names = "pcie20_phy0_pipe_clk";
			#clock-cells = <0>;

			#phy-cells = <0>;

			resets = <&gcc GCC_PCIE0_PHY_BCR>,
				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
			reset-names = "phy",
				      "common";
			status = "disabled";
		};

		pcie_qmp1: phy@8e000 {
			compatible = "qcom,ipq8074-qmp-pcie-phy";
			reg = <0x0008e000 0x1000>;

			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
				 <&gcc GCC_PCIE1_AHB_CLK>,
				 <&gcc GCC_PCIE1_PIPE_CLK>;
			clock-names = "aux",
				      "cfg_ahb",
				      "pipe";

			clock-output-names = "pcie20_phy1_pipe_clk";
			#clock-cells = <0>;

			#phy-cells = <0>;

			resets = <&gcc GCC_PCIE1_PHY_BCR>,
				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
			reset-names = "phy",
				      "common";
			status = "disabled";
		};

		mdio: mdio@90000 {
			compatible = "qcom,ipq8074-mdio", "qcom,ipq4019-mdio";
			reg = <0x00090000 0x64>;
			#address-cells = <1>;
			#size-cells = <0>;

			clocks = <&gcc GCC_MDIO_AHB_CLK>;
			clock-names = "gcc_mdio_ahb_clk";

			clock-frequency = <6250000>;

			status = "disabled";
		};

		qfprom: efuse@a4000 {
			compatible = "qcom,ipq8074-qfprom", "qcom,qfprom";
			reg = <0x000a4000 0x2000>;
			#address-cells = <1>;
			#size-cells = <1>;
		};

		prng: rng@e3000 {
			compatible = "qcom,prng-ee";
			reg = <0x000e3000 0x1000>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
			status = "disabled";
		};

		tsens: thermal-sensor@4a9000 {
			compatible = "qcom,ipq8074-tsens";
			reg = <0x4a9000 0x1000>, /* TM */
			      <0x4a8000 0x1000>; /* SROT */
			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "combined";
			#qcom,sensors = <16>;
			#thermal-sensor-cells = <1>;
		};

		cryptobam: dma-controller@704000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x00704000 0x20000>;
			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <1>;
			qcom,controlled-remotely;
			status = "disabled";
		};

		crypto: crypto@73a000 {
			compatible = "qcom,crypto-v5.1";
			reg = <0x0073a000 0x6000>;
			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
				 <&gcc GCC_CRYPTO_AXI_CLK>,
				 <&gcc GCC_CRYPTO_CLK>;
			clock-names = "iface", "bus", "core";
			dmas = <&cryptobam 2>, <&cryptobam 3>;
			dma-names = "rx", "tx";
			status = "disabled";
		};

		tlmm: pinctrl@1000000 {
			compatible = "qcom,ipq8074-pinctrl";
			reg = <0x01000000 0x300000>;
			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			gpio-ranges = <&tlmm 0 0 70>;
			#gpio-cells = <2>;
			interrupt-controller;
			#interrupt-cells = <2>;

			serial_4_pins: serial4-state {
				pins = "gpio23", "gpio24";
				function = "blsp4_uart1";
				drive-strength = <8>;
				bias-disable;
			};

			serial_5_pins: serial5-state {
				pins = "gpio9", "gpio16";
				function = "blsp5_uart";
				drive-strength = <8>;
				bias-disable;
			};

			i2c_0_pins: i2c-0-state {
				pins = "gpio42", "gpio43";
				function = "blsp1_i2c";
				drive-strength = <8>;
				bias-disable;
			};

			spi_0_pins: spi-0-state {
				pins = "gpio38", "gpio39", "gpio40", "gpio41";
				function = "blsp0_spi";
				drive-strength = <8>;
				bias-disable;
			};

			hsuart_pins: hsuart-state {
				pins = "gpio46", "gpio47", "gpio48", "gpio49";
				function = "blsp2_uart";
				drive-strength = <8>;
				bias-disable;
			};

			qpic_pins: qpic-state {
				pins = "gpio1", "gpio3", "gpio4",
				       "gpio5", "gpio6", "gpio7",
				       "gpio8", "gpio10", "gpio11",
				       "gpio12", "gpio13", "gpio14",
				       "gpio15", "gpio17";
				function = "qpic";
				drive-strength = <8>;
				bias-disable;
			};
		};

		gcc: clock-controller@1800000 {
			compatible = "qcom,gcc-ipq8074";
			reg = <0x01800000 0x80000>;
			clocks = <&xo>,
				 <&sleep_clk>,
				 <&pcie_qmp0>,
				 <&pcie_qmp1>;
			clock-names = "xo",
				      "sleep_clk",
				      "pcie0_pipe",
				      "pcie1_pipe";
			#clock-cells = <1>;
			#power-domain-cells = <1>;
			#reset-cells = <1>;
		};

		tcsr_mutex: hwlock@1905000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0x01905000 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr: syscon@1937000 {
			compatible = "qcom,tcsr-ipq8074", "syscon";
			reg = <0x01937000 0x21000>;
		};

		spmi_bus: spmi@200f000 {
			compatible = "qcom,spmi-pmic-arb";
			reg = <0x0200f000 0x001000>,
			      <0x02400000 0x800000>,
			      <0x02c00000 0x800000>,
			      <0x03800000 0x200000>,
			      <0x0200a000 0x000700>;
			reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "periph_irq";
			qcom,ee = <0>;
			qcom,channel = <0>;
			#address-cells = <2>;
			#size-cells = <0>;
			interrupt-controller;
			#interrupt-cells = <4>;
		};

		sdhc_1: mmc@7824900 {
			compatible = "qcom,ipq8074-sdhci", "qcom,sdhci-msm-v4";
			reg = <0x7824900 0x500>, <0x7824000 0x800>;
			reg-names = "hc", "core";

			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&xo>;
			clock-names = "iface", "core", "xo";
			resets = <&gcc GCC_SDCC1_BCR>;
			max-frequency = <384000000>;
			mmc-ddr-1_8v;
			mmc-hs200-1_8v;
			mmc-hs400-1_8v;
			bus-width = <8>;

			status = "disabled";
		};

		blsp_dma: dma-controller@7884000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07884000 0x2b000>;
			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
		};

		blsp1_uart1: serial@78af000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078af000 0x200>;
			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			status = "disabled";
		};

		blsp1_uart3: serial@78b1000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b1000 0x200>;
			interrupts = <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART3_APPS_CLK>,
				<&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp_dma 4>,
				<&blsp_dma 5>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&hsuart_pins>;
			pinctrl-names = "default";
			status = "disabled";
		};

		blsp1_uart5: serial@78b3000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b3000 0x200>;
			interrupts = <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART5_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			pinctrl-0 = <&serial_4_pins>;
			pinctrl-names = "default";
			status = "disabled";
		};

		blsp1_uart6: serial@78b4000 {
			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
			reg = <0x078b4000 0x200>;
			interrupts = <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_UART6_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			pinctrl-0 = <&serial_5_pins>;
			pinctrl-names = "default";
			status = "disabled";
		};

		blsp1_spi1: spi@78b5000 {
			compatible = "qcom,spi-qup-v2.2.1";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x078b5000 0x600>;
			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>,
				<&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp_dma 12>, <&blsp_dma 13>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&spi_0_pins>;
			pinctrl-names = "default";
			status = "disabled";
		};

		blsp1_i2c2: i2c@78b6000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x078b6000 0x600>;
			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp_dma 14>, <&blsp_dma 15>;
			dma-names = "tx", "rx";
			pinctrl-0 = <&i2c_0_pins>;
			pinctrl-names = "default";
			status = "disabled";
		};

		blsp1_i2c3: i2c@78b7000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x078b7000 0x600>;
			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <100000>;
			dmas = <&blsp_dma 16>, <&blsp_dma 17>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		blsp1_spi4: spi@78b8000 {
			compatible = "qcom,spi-qup-v2.2.1";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x78b8000 0x600>;
			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP4_SPI_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp_dma 18>, <&blsp_dma 19>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		blsp1_i2c5: i2c@78b9000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x78b9000 0x600>;
			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <400000>;
			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		blsp1_spi5: spi@78b9000 {
			compatible = "qcom,spi-qup-v2.2.1";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x78b9000 0x600>;
			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP5_SPI_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			dmas = <&blsp_dma 20>, <&blsp_dma 21>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		blsp1_i2c6: i2c@78ba000 {
			compatible = "qcom,i2c-qup-v2.2.1";
			#address-cells = <1>;
			#size-cells = <0>;
			reg = <0x078ba000 0x600>;
			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>,
				 <&gcc GCC_BLSP1_AHB_CLK>;
			clock-names = "core", "iface";
			clock-frequency = <100000>;
			dmas = <&blsp_dma 22>, <&blsp_dma 23>;
			dma-names = "tx", "rx";
			status = "disabled";
		};

		qpic_bam: dma-controller@7984000 {
			compatible = "qcom,bam-v1.7.0";
			reg = <0x07984000 0x1a000>;
			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
			clocks = <&gcc GCC_QPIC_AHB_CLK>;
			clock-names = "bam_clk";
			#dma-cells = <1>;
			qcom,ee = <0>;
			status = "disabled";
		};

		qpic_nand: nand-controller@79b0000 {
			compatible = "qcom,ipq8074-nand";
			reg = <0x079b0000 0x10000>;
			#address-cells = <1>;
			#size-cells = <0>;
			clocks = <&gcc GCC_QPIC_CLK>,
				 <&gcc GCC_QPIC_AHB_CLK>;
			clock-names = "core", "aon";

			dmas = <&qpic_bam 0>,
			       <&qpic_bam 1>,
			       <&qpic_bam 2>;
			dma-names = "tx", "rx", "cmd";
			pinctrl-0 = <&qpic_pins>;
			pinctrl-names = "default";
			status = "disabled";
		};

		usb_0: usb@8af8800 {
			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
			reg = <0x08af8800 0x400>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
				<&gcc GCC_USB0_MASTER_CLK>,
				<&gcc GCC_USB0_SLEEP_CLK>,
				<&gcc GCC_USB0_MOCK_UTMI_CLK>;
			clock-names = "cfg_noc",
				"core",
				"sleep",
				"mock_utmi";

			assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>,
					  <&gcc GCC_USB0_MASTER_CLK>,
					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
			assigned-clock-rates = <133330000>,
						<133330000>,
						<19200000>;

			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "pwr_event",
					  "qusb2_phy",
					  "ss_phy_irq";

			power-domains = <&gcc USB0_GDSC>;

			resets = <&gcc GCC_USB0_BCR>;
			status = "disabled";

			dwc_0: usb@8a00000 {
				compatible = "snps,dwc3";
				reg = <0x8a00000 0xcd00>;
				interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&qusb_phy_0>, <&ssphy_0>;
				phy-names = "usb2-phy", "usb3-phy";
				snps,parkmode-disable-ss-quirk;
				snps,is-utmi-l1-suspend;
				snps,hird-threshold = /bits/ 8 <0x0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_u3_susphy_quirk;
				dr_mode = "host";
			};
		};

		usb_1: usb@8cf8800 {
			compatible = "qcom,ipq8074-dwc3", "qcom,dwc3";
			reg = <0x08cf8800 0x400>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;

			clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
				<&gcc GCC_USB1_MASTER_CLK>,
				<&gcc GCC_USB1_SLEEP_CLK>,
				<&gcc GCC_USB1_MOCK_UTMI_CLK>;
			clock-names = "cfg_noc",
				"core",
				"sleep",
				"mock_utmi";

			assigned-clocks = <&gcc GCC_SYS_NOC_USB1_AXI_CLK>,
					  <&gcc GCC_USB1_MASTER_CLK>,
					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
			assigned-clock-rates = <133330000>,
						<133330000>,
						<19200000>;

			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "pwr_event",
					  "qusb2_phy",
					  "ss_phy_irq";

			power-domains = <&gcc USB1_GDSC>;

			resets = <&gcc GCC_USB1_BCR>;
			status = "disabled";

			dwc_1: usb@8c00000 {
				compatible = "snps,dwc3";
				reg = <0x8c00000 0xcd00>;
				interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&qusb_phy_1>, <&ssphy_1>;
				phy-names = "usb2-phy", "usb3-phy";
				snps,parkmode-disable-ss-quirk;
				snps,is-utmi-l1-suspend;
				snps,hird-threshold = /bits/ 8 <0x0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_u3_susphy_quirk;
				dr_mode = "host";
			};
		};

		intc: interrupt-controller@b000000 {
			compatible = "qcom,msm-qgic2";
			#address-cells = <1>;
			#size-cells = <1>;
			interrupt-controller;
			#interrupt-cells = <3>;
			reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>;
			ranges = <0 0xb00a000 0xffd>;

			v2m@0 {
				compatible = "arm,gic-v2m-frame";
				msi-controller;
				reg = <0x0 0xffd>;
			};
		};

		watchdog: watchdog@b017000 {
			compatible = "qcom,kpss-wdt";
			reg = <0xb017000 0x1000>;
			interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
			clocks = <&sleep_clk>;
			timeout-sec = <30>;
		};

		apcs_glb: mailbox@b111000 {
			compatible = "qcom,ipq8074-apcs-apps-global",
				     "qcom,ipq6018-apcs-apps-global";
			reg = <0x0b111000 0x1000>;
			clocks = <&a53pll>, <&xo>, <&gcc GPLL0>;
			clock-names = "pll", "xo", "gpll0";

			#clock-cells = <1>;
			#mbox-cells = <1>;
		};

		a53pll: clock@b116000 {
			compatible = "qcom,ipq8074-a53pll";
			reg = <0x0b116000 0x40>;
			#clock-cells = <0>;
			clocks = <&xo>;
			clock-names = "xo";
		};

		timer@b120000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges;
			compatible = "arm,armv7-timer-mem";
			reg = <0x0b120000 0x1000>;

			frame@b120000 {
				frame-number = <0>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b121000 0x1000>,
				      <0x0b122000 0x1000>;
			};

			frame@b123000 {
				frame-number = <1>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b123000 0x1000>;
				status = "disabled";
			};

			frame@b124000 {
				frame-number = <2>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b124000 0x1000>;
				status = "disabled";
			};

			frame@b125000 {
				frame-number = <3>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b125000 0x1000>;
				status = "disabled";
			};

			frame@b126000 {
				frame-number = <4>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b126000 0x1000>;
				status = "disabled";
			};

			frame@b127000 {
				frame-number = <5>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b127000 0x1000>;
				status = "disabled";
			};

			frame@b128000 {
				frame-number = <6>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				reg = <0x0b128000 0x1000>;
				status = "disabled";
			};
		};

		pcie1: pcie@10000000 {
			compatible = "qcom,pcie-ipq8074";
			reg = <0x10000000 0xf1d>,
			      <0x10000f20 0xa8>,
			      <0x00088000 0x2000>,
			      <0x10100000 0x1000>;
			reg-names = "dbi", "elbi", "parf", "config";
			device_type = "pci";
			linux,pci-domain = <1>;
			bus-range = <0x00 0xff>;
			num-lanes = <1>;
			max-link-speed = <2>;
			#address-cells = <3>;
			#size-cells = <2>;

			phys = <&pcie_qmp1>;
			phy-names = "pciephy";

			ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>,   /* I/O */
				 <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */

			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi0",
					  "msi1",
					  "msi2",
					  "msi3",
					  "msi4",
					  "msi5",
					  "msi6",
					  "msi7",
					  "global";
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &intc 0 0 142
					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
					<0 0 0 2 &intc 0 0 143
					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
					<0 0 0 3 &intc 0 0 144
					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
					<0 0 0 4 &intc 0 0 145
					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */

			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
				 <&gcc GCC_PCIE1_AXI_M_CLK>,
				 <&gcc GCC_PCIE1_AXI_S_CLK>,
				 <&gcc GCC_PCIE1_AHB_CLK>,
				 <&gcc GCC_PCIE1_AUX_CLK>;
			clock-names = "iface",
				      "axi_m",
				      "axi_s",
				      "ahb",
				      "aux";
			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
				 <&gcc GCC_PCIE1_SLEEP_ARES>,
				 <&gcc GCC_PCIE1_CORE_STICKY_ARES>,
				 <&gcc GCC_PCIE1_AXI_MASTER_ARES>,
				 <&gcc GCC_PCIE1_AXI_SLAVE_ARES>,
				 <&gcc GCC_PCIE1_AHB_ARES>,
				 <&gcc GCC_PCIE1_AXI_MASTER_STICKY_ARES>;
			reset-names = "pipe",
				      "sleep",
				      "sticky",
				      "axi_m",
				      "axi_s",
				      "ahb",
				      "axi_m_sticky";
			status = "disabled";

			pcie@0 {
				device_type = "pci";
				reg = <0x0 0x0 0x0 0x0 0x0>;
				bus-range = <0x01 0xff>;

				#address-cells = <3>;
				#size-cells = <2>;
				ranges;
			};
		};

		pcie0: pcie@20000000 {
			compatible = "qcom,pcie-ipq8074-gen3";
			reg = <0x20000000 0xf1d>,
			      <0x20000f20 0xa8>,
			      <0x20001000 0x1000>,
			      <0x00080000 0x4000>,
			      <0x20100000 0x1000>;
			reg-names = "dbi", "elbi", "atu", "parf", "config";
			device_type = "pci";
			linux,pci-domain = <0>;
			bus-range = <0x00 0xff>;
			num-lanes = <1>;
			max-link-speed = <3>;
			#address-cells = <3>;
			#size-cells = <2>;

			phys = <&pcie_qmp0>;
			phy-names = "pciephy";

			ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>,   /* I/O */
				 <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */

			interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi0",
					  "msi1",
					  "msi2",
					  "msi3",
					  "msi4",
					  "msi5",
					  "msi6",
					  "msi7",
					  "global";
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0x7>;
			interrupt-map = <0 0 0 1 &intc 0 0 75
					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
					<0 0 0 2 &intc 0 0 78
					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
					<0 0 0 3 &intc 0 0 79
					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
					<0 0 0 4 &intc 0 0 83
					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */

			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
				 <&gcc GCC_PCIE0_AXI_M_CLK>,
				 <&gcc GCC_PCIE0_AXI_S_CLK>,
				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
				 <&gcc GCC_PCIE0_RCHNG_CLK>;
			clock-names = "iface",
				      "axi_m",
				      "axi_s",
				      "axi_bridge",
				      "rchng";

			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
				 <&gcc GCC_PCIE0_SLEEP_ARES>,
				 <&gcc GCC_PCIE0_CORE_STICKY_ARES>,
				 <&gcc GCC_PCIE0_AXI_MASTER_ARES>,
				 <&gcc GCC_PCIE0_AXI_SLAVE_ARES>,
				 <&gcc GCC_PCIE0_AHB_ARES>,
				 <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>,
				 <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>;
			reset-names = "pipe",
				      "sleep",
				      "sticky",
				      "axi_m",
				      "axi_s",
				      "ahb",
				      "axi_m_sticky",
				      "axi_s_sticky";
			status = "disabled";

			pcie@0 {
				device_type = "pci";
				reg = <0x0 0x0 0x0 0x0 0x0>;
				bus-range = <0x01 0xff>;

				#address-cells = <3>;
				#size-cells = <2>;
				ranges;
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
			     <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
	};

	thermal-zones {
		nss-top-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 4>;

			trips {
				nss-top-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		nss0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 5>;

			trips {
				nss-0-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		nss1-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 6>;

			trips {
				nss-1-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		wcss-phya0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 7>;

			trips {
				wcss-phya0-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		wcss-phya1-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 8>;

			trips {
				wcss-phya1-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu0_thermal: cpu0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 9>;

			trips {
				cpu0-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu1_thermal: cpu1-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 10>;

			trips {
				cpu1-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu2_thermal: cpu2-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 11>;

			trips {
				cpu2-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cpu3_thermal: cpu3-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 12>;

			trips {
				cpu3-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		cluster_thermal: cluster-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 13>;

			trips {
				cluster-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		wcss-phyb0-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 14>;

			trips {
				wcss-phyb0-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};

		wcss-phyb1-thermal {
			polling-delay-passive = <250>;

			thermal-sensors = <&tsens 15>;

			trips {
				wcss-phyb1-crit {
					temperature = <110000>;
					hysteresis = <1000>;
					type = "critical";
				};
			};
		};
	};
};