xref: /linux/scripts/dtc/include-prefixes/arm64/qcom/ipq5424.dtsi (revision ec71f661a572a770d7c861cd52a50cbbb0e1a8d1)

// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
 * IPQ5424 device tree source
 *
 * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
 * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
 */

#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,ipq5424-gcc.h>
#include <dt-bindings/reset/qcom,ipq5424-gcc.h>
#include <dt-bindings/interconnect/qcom,ipq5424.h>
#include <dt-bindings/gpio/gpio.h>

/ {
	#address-cells = <2>;
	#size-cells = <2>;
	interrupt-parent = <&intc>;

	clocks {
		sleep_clk: sleep-clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};

		xo_board: xo-board-clk {
			compatible = "fixed-clock";
			#clock-cells = <0>;
		};
	};

	cpus: cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpu0: cpu@0 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			reg = <0x0>;
			enable-method = "psci";
			next-level-cache = <&l2_0>;
			l2_0: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;

				l3_0: l3-cache {
					compatible = "cache";
					cache-level = <3>;
					cache-unified;
				};
			};
		};

		cpu1: cpu@100 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			enable-method = "psci";
			reg = <0x100>;
			next-level-cache = <&l2_100>;

			l2_100: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu2: cpu@200 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			enable-method = "psci";
			reg = <0x200>;
			next-level-cache = <&l2_200>;

			l2_200: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};

		cpu3: cpu@300 {
			device_type = "cpu";
			compatible = "arm,cortex-a55";
			enable-method = "psci";
			reg = <0x300>;
			next-level-cache = <&l2_300>;

			l2_300: l2-cache {
				compatible = "cache";
				cache-level = <2>;
				cache-unified;
				next-level-cache = <&l3_0>;
			};
		};
	};

	firmware {
		scm {
			compatible = "qcom,scm-ipq5424", "qcom,scm";
			qcom,dload-mode = <&tcsr 0x25100>;
		};
	};

	memory@80000000 {
		device_type = "memory";
		/* We expect the bootloader to fill in the size */
		reg = <0x0 0x80000000 0x0 0x0>;
	};

	pmu-a55 {
		compatible = "arm,cortex-a55-pmu";
		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
	};

	pmu-dsu {
		compatible = "arm,dsu-pmu";
		interrupts = <GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
		cpus = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
	};

	psci {
		compatible = "arm,psci-1.0";
		method = "smc";
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		bootloader@8a200000 {
			reg = <0x0 0x8a200000 0x0 0x400000>;
			no-map;
		};

		tz@8a600000 {
			reg = <0x0 0x8a600000 0x0 0x200000>;
			no-map;
		};

		smem@8a800000 {
			compatible = "qcom,smem";
			reg = <0x0 0x8a800000 0x0 0x32000>;
			no-map;

			hwlocks = <&tcsr_mutex 3>;
		};
	};

	soc@0 {
		compatible = "simple-bus";
		#address-cells = <2>;
		#size-cells = <2>;
		ranges = <0 0 0 0 0x10 0>;

		pcie0_phy: phy@84000 {
			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
			reg = <0x0 0x00084000 0x0 0x1000>;
			clocks = <&gcc GCC_PCIE0_AUX_CLK>,
				 <&gcc GCC_PCIE0_AHB_CLK>,
				 <&gcc GCC_PCIE0_PIPE_CLK>;
			clock-names = "aux",
				      "cfg_ahb",
				      "pipe";

			assigned-clocks = <&gcc GCC_PCIE0_AUX_CLK>;
			assigned-clock-rates = <20000000>;

			resets = <&gcc GCC_PCIE0_PHY_BCR>,
				 <&gcc GCC_PCIE0PHY_PHY_BCR>;
			reset-names = "phy",
				      "common";

			#clock-cells = <0>;
			clock-output-names = "gcc_pcie0_pipe_clk_src";

			#phy-cells = <0>;
			status = "disabled";
		};

		pcie1_phy: phy@8c000 {
			compatible = "qcom,ipq5424-qmp-gen3x1-pcie-phy",
				     "qcom,ipq9574-qmp-gen3x1-pcie-phy";
			reg = <0x0 0x0008c000 0x0 0x1000>;
			clocks = <&gcc GCC_PCIE1_AUX_CLK>,
				 <&gcc GCC_PCIE1_AHB_CLK>,
				 <&gcc GCC_PCIE1_PIPE_CLK>;
			clock-names = "aux",
				      "cfg_ahb",
				      "pipe";

			assigned-clocks = <&gcc GCC_PCIE1_AUX_CLK>;
			assigned-clock-rates = <20000000>;

			resets = <&gcc GCC_PCIE1_PHY_BCR>,
				 <&gcc GCC_PCIE1PHY_PHY_BCR>;
			reset-names = "phy",
				      "common";

			#clock-cells = <0>;
			clock-output-names = "gcc_pcie1_pipe_clk_src";

			#phy-cells = <0>;
			status = "disabled";
		};

		efuse@a4000 {
			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
			reg = <0 0x000a4000 0 0x741>;
			#address-cells = <1>;
			#size-cells = <1>;

			tsens_sens9_off: s9@3dc {
				reg = <0x3dc 0x1>;
				bits = <4 4>;
			};

			tsens_sens10_off: s10@3dd {
				reg = <0x3dd 0x1>;
				bits = <0 4>;
			};

			tsens_sens11_off: s11@3dd {
				reg = <0x3dd 0x1>;
				bits = <4 4>;
			};

			tsens_sens12_off: s12@3de {
				reg = <0x3de 0x1>;
				bits = <0 4>;
			};

			tsens_sens13_off: s13@3de {
				reg = <0x3de 0x1>;
				bits = <4 4>;
			};

			tsens_sens14_off: s14@3e5 {
				reg = <0x3e5 0x2>;
				bits = <7 4>;
			};

			tsens_sens15_off: s15@3e6 {
				reg = <0x3e6 0x1>;
				bits = <3 4>;
			};

			tsens_mode: mode@419 {
				reg = <0x419 0x1>;
				bits = <0 3>;
			};

			tsens_base0: base0@419 {
				reg = <0x419 0x2>;
				bits = <3 10>;
			};

			tsens_base1: base1@41a {
				reg = <0x41a 0x2>;
				bits = <5 10>;
			};
		};

		pcie2_phy: phy@f4000 {
			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
			reg = <0x0 0x000f4000 0x0 0x2000>;
			clocks = <&gcc GCC_PCIE2_AUX_CLK>,
				 <&gcc GCC_PCIE2_AHB_CLK>,
				 <&gcc GCC_PCIE2_PIPE_CLK>;
			clock-names = "aux",
				      "cfg_ahb",
				      "pipe";

			assigned-clocks = <&gcc GCC_PCIE2_AUX_CLK>;
			assigned-clock-rates = <20000000>;

			resets = <&gcc GCC_PCIE2_PHY_BCR>,
				 <&gcc GCC_PCIE2PHY_PHY_BCR>;
			reset-names = "phy",
				      "common";

			#clock-cells = <0>;
			clock-output-names = "gcc_pcie2_pipe_clk_src";

			#phy-cells = <0>;
			status = "disabled";
		};

		pcie3_phy: phy@fc000 {
			compatible = "qcom,ipq5424-qmp-gen3x2-pcie-phy",
				     "qcom,ipq9574-qmp-gen3x2-pcie-phy";
			reg = <0x0 0x000fc000 0x0 0x2000>;
			clocks = <&gcc GCC_PCIE3_AUX_CLK>,
				 <&gcc GCC_PCIE3_AHB_CLK>,
				 <&gcc GCC_PCIE3_PIPE_CLK>;
			clock-names = "aux",
				      "cfg_ahb",
				      "pipe";

			assigned-clocks = <&gcc GCC_PCIE3_AUX_CLK>;
			assigned-clock-rates = <20000000>;

			resets = <&gcc GCC_PCIE3_PHY_BCR>,
				 <&gcc GCC_PCIE3PHY_PHY_BCR>;
			reset-names = "phy",
				      "common";

			#clock-cells = <0>;
			clock-output-names = "gcc_pcie3_pipe_clk_src";

			#phy-cells = <0>;
			status = "disabled";
		};

		tsens: thermal-sensor@4a9000 {
			compatible = "qcom,ipq5424-tsens";
			reg = <0 0x004a9000 0 0x1000>,
			      <0 0x004a8000 0 0x1000>;
			interrupts = <GIC_SPI 105 IRQ_TYPE_EDGE_RISING>;
			interrupt-names = "combined";
			nvmem-cells = <&tsens_mode>,
				      <&tsens_base0>,
				      <&tsens_base1>,
				      <&tsens_sens9_off>,
				      <&tsens_sens10_off>,
				      <&tsens_sens11_off>,
				      <&tsens_sens12_off>,
				      <&tsens_sens13_off>,
				      <&tsens_sens14_off>,
				      <&tsens_sens15_off>;
			nvmem-cell-names = "mode",
					   "base0",
					   "base1",
					   "tsens_sens9_off",
					   "tsens_sens10_off",
					   "tsens_sens11_off",
					   "tsens_sens12_off",
					   "tsens_sens13_off",
					   "tsens_sens14_off",
					   "tsens_sens15_off";
			#qcom,sensors = <7>;
			#thermal-sensor-cells = <1>;
		};

		rng: rng@4c3000 {
			compatible = "qcom,ipq5424-trng", "qcom,trng";
			reg = <0 0x004c3000 0 0x1000>;
			clocks = <&gcc GCC_PRNG_AHB_CLK>;
			clock-names = "core";
		};

		system-cache-controller@800000 {
			compatible = "qcom,ipq5424-llcc";
			reg = <0 0x00800000 0 0x200000>;
			reg-names = "llcc0_base";
			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
		};

		tlmm: pinctrl@1000000 {
			compatible = "qcom,ipq5424-tlmm";
			reg = <0 0x01000000 0 0x300000>;
			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
			gpio-controller;
			#gpio-cells = <2>;
			gpio-ranges = <&tlmm 0 0 50>;
			interrupt-controller;
			#interrupt-cells = <2>;

			uart1_pins: uart1-state {
				pins = "gpio43", "gpio44";
				function = "uart1";
				drive-strength = <8>;
				bias-pull-up;
			};
		};

		gcc: clock-controller@1800000 {
			compatible = "qcom,ipq5424-gcc";
			reg = <0 0x01800000 0 0x40000>;
			clocks = <&xo_board>,
				 <&sleep_clk>,
				 <&pcie0_phy>,
				 <&pcie1_phy>,
				 <&pcie2_phy>,
				 <&pcie3_phy>,
				 <0>;
			#clock-cells = <1>;
			#reset-cells = <1>;
			#interconnect-cells = <1>;
		};

		tcsr_mutex: hwlock@1905000 {
			compatible = "qcom,tcsr-mutex";
			reg = <0 0x01905000 0 0x20000>;
			#hwlock-cells = <1>;
		};

		tcsr: syscon@1937000 {
			compatible = "qcom,tcsr-ipq5424", "syscon";
			reg = <0 0x01937000 0 0x2a000>;
		};

		qupv3: geniqup@1ac0000 {
			compatible = "qcom,geni-se-qup";
			reg = <0 0x01ac0000 0 0x2000>;
			ranges;
			clocks = <&gcc GCC_QUPV3_AHB_MST_CLK>,
				 <&gcc GCC_QUPV3_AHB_SLV_CLK>;
			clock-names = "m-ahb", "s-ahb";
			#address-cells = <2>;
			#size-cells = <2>;

			uart1: serial@1a84000 {
				compatible = "qcom,geni-debug-uart";
				reg = <0 0x01a84000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_UART1_CLK>;
				clock-names = "se";
				interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
			};

			spi0: spi@1a90000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x01a90000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_SPI0_CLK>;
				clock-names = "se";
				interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};

			spi1: spi@1a94000 {
				compatible = "qcom,geni-spi";
				reg = <0 0x01a94000 0 0x4000>;
				clocks = <&gcc GCC_QUPV3_SPI1_CLK>;
				clock-names = "se";
				interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
				#address-cells = <1>;
				#size-cells = <0>;
				status = "disabled";
			};
		};

		sdhc: mmc@7804000 {
			compatible = "qcom,ipq5424-sdhci", "qcom,sdhci-msm-v5";
			reg = <0 0x07804000 0 0x1000>, <0 0x07805000 0 0x1000>;
			reg-names = "hc", "cqhci";

			interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "hc_irq", "pwr_irq";

			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
				 <&gcc GCC_SDCC1_APPS_CLK>,
				 <&xo_board>;
			clock-names = "iface", "core", "xo";

			supports-cqe;

			status = "disabled";
		};

		intc: interrupt-controller@f200000 {
			compatible = "arm,gic-v3";
			reg = <0 0xf200000 0 0x10000>, /* GICD */
			      <0 0xf240000 0 0x80000>; /* GICR * 4 regions */
			#interrupt-cells = <0x3>;
			interrupt-controller;
			#redistributor-regions = <1>;
			redistributor-stride = <0x0 0x20000>;
			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
			mbi-ranges = <672 128>;
			msi-controller;
		};

		watchdog@f410000 {
			compatible = "qcom,apss-wdt-ipq5424", "qcom,kpss-wdt";
			reg = <0 0x0f410000 0 0x1000>;
			interrupts = <GIC_SPI 0 IRQ_TYPE_EDGE_RISING>;
			clocks = <&sleep_clk>;
		};

		qusb_phy_1: phy@71000 {
			compatible = "qcom,ipq5424-qusb2-phy";
			reg = <0 0x00071000 0 0x180>;
			#phy-cells = <0>;

			clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
				<&xo_board>;
			clock-names = "cfg_ahb", "ref";

			resets = <&gcc GCC_QUSB2_1_PHY_BCR>;
			status = "disabled";
		};

		usb2: usb2@1e00000 {
			compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
			reg = <0 0x01ef8800 0 0x400>;
			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			clocks = <&gcc GCC_USB1_MASTER_CLK>,
				 <&gcc GCC_USB1_SLEEP_CLK>,
				 <&gcc GCC_USB1_MOCK_UTMI_CLK>,
				 <&gcc GCC_USB1_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_CNOC_USB_CLK>;

			clock-names = "core",
				      "sleep",
				      "mock_utmi",
				      "iface",
				      "cfg_noc";

			assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>,
					  <&gcc GCC_USB1_MOCK_UTMI_CLK>;
			assigned-clock-rates = <200000000>,
					       <24000000>;

			interrupts-extended = <&intc GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 387 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 388 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "pwr_event",
					  "qusb2_phy",
					  "dm_hs_phy_irq",
					  "dp_hs_phy_irq";

			resets = <&gcc GCC_USB1_BCR>;
			qcom,select-utmi-as-pipe-clk;
			status = "disabled";

			dwc_1: usb@1e00000 {
				compatible = "snps,dwc3";
				reg = <0 0x01e00000 0 0xe000>;
				clocks = <&gcc GCC_USB1_MOCK_UTMI_CLK>;
				clock-names = "ref";
				interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&qusb_phy_1>;
				phy-names = "usb2-phy";
				tx-fifo-resize;
				snps,is-utmi-l1-suspend;
				snps,hird-threshold = /bits/ 8 <0x0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_u3_susphy_quirk;
			};
		};

		qusb_phy_0: phy@7b000 {
			compatible = "qcom,ipq5424-qusb2-phy";
			reg = <0 0x0007b000 0 0x180>;
			#phy-cells = <0>;

			clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
				<&xo_board>;
			clock-names = "cfg_ahb", "ref";

			resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
			status = "disabled";
		};

		ssphy_0: phy@7d000 {
			compatible = "qcom,ipq5424-qmp-usb3-phy";
			reg = <0 0x0007d000 0 0xa00>;
			#phy-cells = <0>;

			clocks = <&gcc GCC_USB0_AUX_CLK>,
				 <&xo_board>,
				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_USB0_PIPE_CLK>;
			clock-names = "aux",
				      "ref",
				      "cfg_ahb",
				      "pipe";

			resets = <&gcc GCC_USB0_PHY_BCR>,
				 <&gcc GCC_USB3PHY_0_PHY_BCR>;
			reset-names = "phy",
				      "phy_phy";

			#clock-cells = <0>;
			clock-output-names = "usb0_pipe_clk";

			status = "disabled";
		};

		usb3: usb3@8a00000 {
			compatible = "qcom,ipq5424-dwc3", "qcom,dwc3";
			reg = <0 0x08af8800 0 0x400>;

			#address-cells = <2>;
			#size-cells = <2>;
			ranges;

			clocks = <&gcc GCC_USB0_MASTER_CLK>,
				 <&gcc GCC_USB0_SLEEP_CLK>,
				 <&gcc GCC_USB0_MOCK_UTMI_CLK>,
				 <&gcc GCC_USB0_PHY_CFG_AHB_CLK>,
				 <&gcc GCC_CNOC_USB_CLK>;

			clock-names = "core",
				      "sleep",
				      "mock_utmi",
				      "iface",
				      "cfg_noc";

			assigned-clocks = <&gcc GCC_USB0_MASTER_CLK>,
					  <&gcc GCC_USB0_MOCK_UTMI_CLK>;
			assigned-clock-rates = <200000000>,
					       <24000000>;

			interrupts-extended = <&intc GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
					      <&intc GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "pwr_event",
					  "qusb2_phy",
					  "dm_hs_phy_irq",
					  "dp_hs_phy_irq";

			resets = <&gcc GCC_USB_BCR>;
			status = "disabled";

			dwc_0: usb@8a00000 {
				compatible = "snps,dwc3";
				reg = <0 0x08a00000 0 0xcd00>;
				clocks = <&gcc GCC_USB0_MOCK_UTMI_CLK>;
				clock-names = "ref";
				interrupts = <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>;
				phys = <&qusb_phy_0>, <&ssphy_0>;
				phy-names = "usb2-phy", "usb3-phy";
				tx-fifo-resize;
				snps,is-utmi-l1-suspend;
				snps,hird-threshold = /bits/ 8 <0x0>;
				snps,dis_u2_susphy_quirk;
				snps,dis_u3_susphy_quirk;
				snps,dis-u1-entry-quirk;
				snps,dis-u2-entry-quirk;
			};
		};

		timer@f420000 {
			compatible = "arm,armv7-timer-mem";
			reg = <0 0xf420000 0 0x1000>;
			ranges = <0 0 0 0x10000000>;
			#address-cells = <1>;
			#size-cells = <1>;

			frame@f421000 {
				reg = <0xf421000 0x1000>,
				      <0xf422000 0x1000>;
				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <0>;
			};

			frame@f423000 {
				reg = <0xf423000 0x1000>;
				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <1>;
				status = "disabled";
			};

			frame@f425000 {
				reg = <0xf425000 0x1000>,
				      <0xf426000 0x1000>;
				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <2>;
				status = "disabled";
			};

			frame@f427000 {
				reg = <0xf427000 0x1000>;
				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <3>;
				status = "disabled";
			};

			frame@f429000 {
				reg = <0xf429000 0x1000>;
				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <4>;
				status = "disabled";
			};

			frame@f42b000 {
				reg = <0xf42b000 0x1000>;
				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <5>;
				status = "disabled";
			};

			frame@f42d000 {
				reg = <0xf42d000 0x1000>;
				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
				frame-number = <6>;
				status = "disabled";
			};
		};

		pcie3: pcie@40000000 {
			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
			reg = <0x0 0x40000000 0x0 0xf1c>,
			      <0x0 0x40000f20 0x0 0xa8>,
			      <0x0 0x40001000 0x0 0x1000>,
			      <0x0 0x000f8000 0x0 0x3000>,
			      <0x0 0x40100000 0x0 0x1000>,
			      <0x0 0x000fe000 0x0 0x1000>;
			reg-names = "dbi",
				    "elbi",
				    "atu",
				    "parf",
				    "config",
				    "mhi";
			device_type = "pci";
			linux,pci-domain = <3>;
			num-lanes = <2>;
			#address-cells = <3>;
			#size-cells = <2>;

			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x00100000>,
				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x0fd00000>;

			msi-map = <0x0 &intc 0x0 0x1000>;

			interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 474 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 475 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 478 IRQ_TYPE_LEVEL_HIGH>;

			interrupt-names = "msi0",
					  "msi1",
					  "msi2",
					  "msi3",
					  "msi4",
					  "msi5",
					  "msi6",
					  "msi7",
					  "global";

			#interrupt-cells = <1>;
			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
			interrupt-map = <0 0 0 1 &intc 0 479 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &intc 0 480 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &intc 0 481 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &intc 0 482 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
				 <&gcc GCC_PCIE3_AXI_S_CLK>,
				 <&gcc GCC_PCIE3_AXI_S_BRIDGE_CLK>,
				 <&gcc GCC_PCIE3_RCHNG_CLK>,
				 <&gcc GCC_PCIE3_AHB_CLK>,
				 <&gcc GCC_PCIE3_AUX_CLK>;
			clock-names = "axi_m",
				      "axi_s",
				      "axi_bridge",
				      "rchng",
				      "ahb",
				      "aux";

			assigned-clocks = <&gcc GCC_PCIE3_RCHNG_CLK>;
			assigned-clock-rates = <100000000>;

			resets = <&gcc GCC_PCIE3_PIPE_ARES>,
				 <&gcc GCC_PCIE3_CORE_STICKY_RESET>,
				 <&gcc GCC_PCIE3_AXI_S_STICKY_RESET>,
				 <&gcc GCC_PCIE3_AXI_S_ARES>,
				 <&gcc GCC_PCIE3_AXI_M_STICKY_RESET>,
				 <&gcc GCC_PCIE3_AXI_M_ARES>,
				 <&gcc GCC_PCIE3_AUX_ARES>,
				 <&gcc GCC_PCIE3_AHB_ARES>;
			reset-names = "pipe",
				      "sticky",
				      "axi_s_sticky",
				      "axi_s",
				      "axi_m_sticky",
				      "axi_m",
				      "aux",
				      "ahb";

			phys = <&pcie3_phy>;
			phy-names = "pciephy";
			interconnects = <&gcc MASTER_ANOC_PCIE3 &gcc SLAVE_ANOC_PCIE3>,
					<&gcc MASTER_CNOC_PCIE3 &gcc SLAVE_CNOC_PCIE3>;
			interconnect-names = "pcie-mem", "cpu-pcie";

			status = "disabled";

			pcie@0 {
				device_type = "pci";
				reg = <0x0 0x0 0x0 0x0 0x0>;
				bus-range = <0x01 0xff>;

				#address-cells = <3>;
				#size-cells = <2>;
				ranges;
			};
		};

		pcie2: pcie@50000000 {
			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
			reg = <0x0 0x50000000 0x0 0xf1c>,
			      <0x0 0x50000f20 0x0 0xa8>,
			      <0x0 0x50001000 0x0 0x1000>,
			      <0x0 0x000f0000 0x0 0x3000>,
			      <0x0 0x50100000 0x0 0x1000>,
			      <0x0 0x000f6000 0x0 0x1000>;
			reg-names = "dbi",
				    "elbi",
				    "atu",
				    "parf",
				    "config",
				    "mhi";
			device_type = "pci";
			linux,pci-domain = <2>;
			num-lanes = <2>;
			#address-cells = <3>;
			#size-cells = <2>;

			ranges = <0x01000000 0x0 0x00000000 0x0 0x50200000 0x0 0x00100000>,
				 <0x02000000 0x0 0x50300000 0x0 0x50300000 0x0 0x0fd00000>;

			msi-map = <0x0 &intc 0x0 0x1000>;

			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi0",
					  "msi1",
					  "msi2",
					  "msi3",
					  "msi4",
					  "msi5",
					  "msi6",
					  "msi7",
					  "global";

			#interrupt-cells = <1>;
			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
			interrupt-map = <0 0 0 1 &intc 0 464 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &intc 0 465 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &intc 0 466 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &intc 0 467 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
				 <&gcc GCC_PCIE2_AXI_S_CLK>,
				 <&gcc GCC_PCIE2_AXI_S_BRIDGE_CLK>,
				 <&gcc GCC_PCIE2_RCHNG_CLK>,
				 <&gcc GCC_PCIE2_AHB_CLK>,
				 <&gcc GCC_PCIE2_AUX_CLK>;
			clock-names = "axi_m",
				      "axi_s",
				      "axi_bridge",
				      "rchng",
				      "ahb",
				      "aux";

			assigned-clocks = <&gcc GCC_PCIE2_RCHNG_CLK>;
			assigned-clock-rates = <100000000>;

			resets = <&gcc GCC_PCIE2_PIPE_ARES>,
				 <&gcc GCC_PCIE2_CORE_STICKY_RESET>,
				 <&gcc GCC_PCIE2_AXI_S_STICKY_RESET>,
				 <&gcc GCC_PCIE2_AXI_S_ARES>,
				 <&gcc GCC_PCIE2_AXI_M_STICKY_RESET>,
				 <&gcc GCC_PCIE2_AXI_M_ARES>,
				 <&gcc GCC_PCIE2_AUX_ARES>,
				 <&gcc GCC_PCIE2_AHB_ARES>;
			reset-names = "pipe",
				      "sticky",
				      "axi_s_sticky",
				      "axi_s",
				      "axi_m_sticky",
				      "axi_m",
				      "aux",
				      "ahb";

			phys = <&pcie2_phy>;
			phy-names = "pciephy";
			interconnects = <&gcc MASTER_ANOC_PCIE2 &gcc SLAVE_ANOC_PCIE2>,
					<&gcc MASTER_CNOC_PCIE2 &gcc SLAVE_CNOC_PCIE2>;
			interconnect-names = "pcie-mem", "cpu-pcie";

			status = "disabled";

			pcie@0 {
				device_type = "pci";
				reg = <0x0 0x0 0x0 0x0 0x0>;
				bus-range = <0x01 0xff>;

				#address-cells = <3>;
				#size-cells = <2>;
				ranges;
			};
		};

		pcie1: pcie@60000000 {
			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
			reg = <0x0 0x60000000 0x0 0xf1c>,
			      <0x0 0x60000f20 0x0 0xa8>,
			      <0x0 0x60001000 0x0 0x1000>,
			      <0x0 0x00088000 0x0 0x3000>,
			      <0x0 0x60100000 0x0 0x1000>,
			      <0x0 0x0008e000 0x0 0x1000>;
			reg-names = "dbi",
				    "elbi",
				    "atu",
				    "parf",
				    "config",
				    "mhi";
			device_type = "pci";
			linux,pci-domain = <1>;
			num-lanes = <1>;
			#address-cells = <3>;
			#size-cells = <2>;

			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x00100000>,
				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x0fd00000>;

			msi-map = <0x0 &intc 0x0 0x1000>;

			interrupts = <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 441 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 447 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 448 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi0",
					  "msi1",
					  "msi2",
					  "msi3",
					  "msi4",
					  "msi5",
					  "msi6",
					  "msi7",
					  "global";

			#interrupt-cells = <1>;
			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
			interrupt-map = <0 0 0 1 &intc 0 449 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &intc 0 450 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &intc 0 451 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &intc 0 452 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
				 <&gcc GCC_PCIE1_AXI_S_CLK>,
				 <&gcc GCC_PCIE1_AXI_S_BRIDGE_CLK>,
				 <&gcc GCC_PCIE1_RCHNG_CLK>,
				 <&gcc GCC_PCIE1_AHB_CLK>,
				 <&gcc GCC_PCIE1_AUX_CLK>;
			clock-names = "axi_m",
				      "axi_s",
				      "axi_bridge",
				      "rchng",
				      "ahb",
				      "aux";

			assigned-clocks = <&gcc GCC_PCIE1_RCHNG_CLK>;
			assigned-clock-rates = <100000000>;

			resets = <&gcc GCC_PCIE1_PIPE_ARES>,
				 <&gcc GCC_PCIE1_CORE_STICKY_RESET>,
				 <&gcc GCC_PCIE1_AXI_S_STICKY_RESET>,
				 <&gcc GCC_PCIE1_AXI_S_ARES>,
				 <&gcc GCC_PCIE1_AXI_M_STICKY_RESET>,
				 <&gcc GCC_PCIE1_AXI_M_ARES>,
				 <&gcc GCC_PCIE1_AUX_ARES>,
				 <&gcc GCC_PCIE1_AHB_ARES>;
			reset-names = "pipe",
				      "sticky",
				      "axi_s_sticky",
				      "axi_s",
				      "axi_m_sticky",
				      "axi_m",
				      "aux",
				      "ahb";

			phys = <&pcie1_phy>;
			phy-names = "pciephy";
			interconnects = <&gcc MASTER_ANOC_PCIE1	&gcc SLAVE_ANOC_PCIE1>,
					<&gcc MASTER_CNOC_PCIE1	&gcc SLAVE_CNOC_PCIE1>;
			interconnect-names = "pcie-mem", "cpu-pcie";

			status = "disabled";

			pcie@0 {
				device_type = "pci";
				reg = <0x0 0x0 0x0 0x0 0x0>;
				bus-range = <0x01 0xff>;

				#address-cells = <3>;
				#size-cells = <2>;
				ranges;
			};
		};

		pcie0: pcie@70000000 {
			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
			reg = <0x0 0x70000000 0x0 0xf1c>,
			      <0x0 0x70000f20 0x0 0xa8>,
			      <0x0 0x70001000 0x0 0x1000>,
			      <0x0 0x00080000 0x0 0x3000>,
			      <0x0 0x70100000 0x0 0x1000>,
			      <0x0 0x00086000 0x0 0x1000>;
			reg-names = "dbi",
				    "elbi",
				    "atu",
				    "parf",
				    "config",
				    "mhi";
			device_type = "pci";
			linux,pci-domain = <0>;
			num-lanes = <1>;
			#address-cells = <3>;
			#size-cells = <2>;

			ranges = <0x01000000 0x0 0x00000000 0x0 0x70200000 0x0 0x00100000>,
				 <0x02000000 0x0 0x70300000 0x0 0x70300000 0x0 0x0fd00000>;

			msi-map = <0x0 &intc 0x0 0x1000>;

			interrupts = <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 426 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 427 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 428 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 429 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 430 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 431 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
				     <GIC_SPI 433 IRQ_TYPE_LEVEL_HIGH>;
			interrupt-names = "msi0",
					  "msi1",
					  "msi2",
					  "msi3",
					  "msi4",
					  "msi5",
					  "msi6",
					  "msi7",
					  "global";

			#interrupt-cells = <1>;
			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 3 &intc 0 436 IRQ_TYPE_LEVEL_HIGH>,
					<0 0 0 4 &intc 0 437 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
				 <&gcc GCC_PCIE0_AXI_S_CLK>,
				 <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>,
				 <&gcc GCC_PCIE0_RCHNG_CLK>,
				 <&gcc GCC_PCIE0_AHB_CLK>,
				 <&gcc GCC_PCIE0_AUX_CLK>;
			clock-names = "axi_m",
				      "axi_s",
				      "axi_bridge",
				      "rchng",
				      "ahb",
				      "aux";

			assigned-clocks = <&gcc GCC_PCIE0_RCHNG_CLK>;
			assigned-clock-rates = <100000000>;

			resets = <&gcc GCC_PCIE0_PIPE_ARES>,
				 <&gcc GCC_PCIE0_CORE_STICKY_RESET>,
				 <&gcc GCC_PCIE0_AXI_S_STICKY_RESET>,
				 <&gcc GCC_PCIE0_AXI_S_ARES>,
				 <&gcc GCC_PCIE0_AXI_M_STICKY_RESET>,
				 <&gcc GCC_PCIE0_AXI_M_ARES>,
				 <&gcc GCC_PCIE0_AUX_ARES>,
				 <&gcc GCC_PCIE0_AHB_ARES>;
			reset-names = "pipe",
				      "sticky",
				      "axi_s_sticky",
				      "axi_s",
				      "axi_m_sticky",
				      "axi_m",
				      "aux",
				      "ahb";

			phys = <&pcie0_phy>;
			phy-names = "pciephy";
			interconnects = <&gcc MASTER_ANOC_PCIE0 &gcc SLAVE_ANOC_PCIE0>,
					<&gcc MASTER_CNOC_PCIE0	&gcc SLAVE_CNOC_PCIE0>;
			interconnect-names = "pcie-mem", "cpu-pcie";

			status = "disabled";

			pcie@0 {
				device_type = "pci";
				reg = <0x0 0x0 0x0 0x0 0x0>;
				bus-range = <0x01 0xff>;

				#address-cells = <3>;
				#size-cells = <2>;
				ranges;
			};
		};
	};

	thermal_zones: thermal-zones {
		cpu0-thermal {
			polling-delay-passive = <100>;
			thermal-sensors = <&tsens 14>;

			trips {
				cpu-critical {
					temperature = <120000>;
					hysteresis = <9000>;
					type = "critical";
				};

				cpu-passive {
					temperature = <110000>;
					hysteresis = <9000>;
					type = "passive";
				};
			};
		};

		cpu1-thermal {
			polling-delay-passive = <100>;
			thermal-sensors = <&tsens 12>;

			trips {
				cpu-critical {
					temperature = <120000>;
					hysteresis = <9000>;
					type = "critical";
				};

				cpu-passive {
					temperature = <110000>;
					hysteresis = <9000>;
					type = "passive";
				};
			};
		};

		cpu2-thermal {
			polling-delay-passive = <100>;
			thermal-sensors = <&tsens 11>;

			trips {
				cpu-critical {
					temperature = <120000>;
					hysteresis = <9000>;
					type = "critical";
				};

				cpu-passive {
					temperature = <110000>;
					hysteresis = <9000>;
					type = "passive";
				};
			};
		};

		cpu3-thermal {
			polling-delay-passive = <100>;
			thermal-sensors = <&tsens 13>;

			trips {
				cpu-critical {
					temperature = <120000>;
					hysteresis = <9000>;
					type = "critical";
				};

				cpu-passive {
					temperature = <110000>;
					hysteresis = <9000>;
					type = "passive";
				};
			};
		};

		wcss-tile2-thermal {
			thermal-sensors = <&tsens 9>;

			trips {
				wcss-tile2-critical {
					temperature = <125000>;
					hysteresis = <9000>;
					type = "critical";
				};
			};
		};

		wcss-tile3-thermal {
			thermal-sensors = <&tsens 10>;

			trips {
				wcss-tile3-critical {
					temperature = <125000>;
					hysteresis = <9000>;
					type = "critical";
				};
			};
		};

		top-glue-thermal {
			thermal-sensors = <&tsens 15>;

			trips {
				top-glue-critical {
					temperature = <125000>;
					hysteresis = <9000>;
					type = "critical";
				};
			};
		};
	};

	timer {
		compatible = "arm,armv8-timer";
		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
			     <GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
	};
};