xref: /linux/scripts/dtc/include-prefixes/arm64/freescale/imx95-verdin.dtsi (revision 0fc8f6200d2313278fbf4539bbab74677c685531)

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
/*
 * Copyright (c) Toradex
 *
 * Common dtsi for Verdin iMX95 SoM
 *
 * https://www.toradex.com/computer-on-modules/verdin-arm-family/nxp-imx95
 */

#include <dt-bindings/net/ti-dp83867.h>
#include "imx95.dtsi"

/ {
	aliases {
		can0 = &flexcan1;
		can1 = &flexcan2;
		eeprom0 = &som_eeprom;
		ethernet0 = &enetc_port0;
		ethernet1 = &enetc_port1;
		i2c0 = &lpi2c2;
		i2c1 = &lpi2c4;
		i2c2 = &lpi2c3;
		i2c3 = &i3c2;
		i2c4 = &lpi2c5;
		mmc0 = &usdhc1;
		mmc1 = &usdhc2;
		mmc2 = &usdhc3;
		rtc0 = &rtc_i2c;
		rtc1 = &scmi_bbm;
		serial0 = &lpuart7;
		serial1 = &lpuart8;
		serial2 = &lpuart1;
		serial3 = &lpuart2;
		serial4 = &lpuart6;
		usb0 = &usb2;
		usb1 = &usb3;
	};

	chosen {
		stdout-path = "serial2:115200n8";
	};

	connector {
		compatible = "gpio-usb-b-connector", "usb-b-connector";
		/* Verdin USB_1_ID (SODIMM 161) */
		id-gpios = <&som_gpio_expander 5 GPIO_ACTIVE_HIGH>;
		label = "USB_1";
		self-powered;
		vbus-supply = <&reg_usb1_vbus>;

		port {
			usb_dr_connector: endpoint {
				remote-endpoint = <&usb1_id>;
			};
		};
	};

	verdin_gpio_keys: gpio-keys {
		compatible = "gpio-keys";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_ctrl_wake1_mico>;

		status = "disabled";

		verdin_key_wakeup: key-wakeup {
			/* Verdin CTRL_WAKE1_MICO# (SODIMM 252) */
			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
			label = "Wake-Up";
			linux,code = <KEY_WAKEUP>;
			wakeup-source;
		};
	};

	reg_1p8v: regulator-1p8v {
		compatible = "regulator-fixed";
		regulator-max-microvolt = <1800000>;
		regulator-min-microvolt = <1800000>;
		regulator-name = "On-module +V1.8";
	};

	/*
	 * By default we enable CTRL_SLEEP_MOCI#, this is required to have
	 * peripherals on the carrier board powered.
	 * If more granularity or power saving is required this can be disabled
	 * in the carrier board device tree files.
	 */
	reg_force_sleep_moci: regulator-force-sleep-moci {
		compatible = "regulator-fixed";
		/* Verdin CTRL_SLEEP_MOCI# (SODIMM 256) */
		gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-always-on;
		regulator-boot-on;
		regulator-name = "CTRL_SLEEP_MOCI#";
	};

	reg_usb1_vbus: regulator-usb1-vbus {
		compatible = "regulator-fixed";
		/* Verdin USB_1_EN (SODIMM 155) */
		gpios = <&som_gpio_expander 7 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-name = "USB_1_EN";
	};

	reg_usb2_vbus: regulator-usb2-vbus {
		compatible = "regulator-fixed";
		/* Verdin USB_2_EN (SODIMM 185) */
		gpios = <&som_gpio_expander 8 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		regulator-name = "USB_2_EN";
	};

	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
		compatible = "regulator-gpio";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc2_vsel>;
		gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
		regulator-max-microvolt = <3300000>;
		regulator-min-microvolt = <1800000>;
		states = <1800000 0x1>,
			 <3300000 0x0>;
		regulator-name = "PMIC_SD2_VSEL";
	};

	reg_usdhc2_vmmc: regulator-vmmc-usdhc2 {
		compatible = "regulator-fixed";
		pinctrl-names = "default";
		pinctrl-0 = <&pinctrl_usdhc2_pwr_en>;
		/* Verdin SD_1_PWR_EN (SODIMM 76) */
		gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>;
		enable-active-high;
		off-on-delay-us = <100000>;
		regulator-max-microvolt = <3300000>;
		regulator-min-microvolt = <3300000>;
		regulator-name = "SD_1_PWR_EN";
		startup-delay-us = <20000>;
	};

	cm7: remoteproc-cm7 {
		compatible = "fsl,imx95-cm7";
		mbox-names = "tx", "rx", "rxdb";
		mboxes = <&mu7 0 1
			  &mu7 1 1
			  &mu7 3 1>;
		memory-region = <&vdevbuffer>, <&vdev0vring0>, <&vdev0vring1>,
				<&vdev1vring0>, <&vdev1vring1>, <&rsc_table>, <&m7_reserved>;
	};

	reserved-memory {
		#address-cells = <2>;
		#size-cells = <2>;
		ranges;

		linux_cma: linux,cma {
			compatible = "shared-dma-pool";
			reusable;
			size = <0 0x3c000000>;
			alloc-ranges = <0 0x80000000 0 0x7F000000>;
			linux,cma-default;
		};

		m7_reserved: memory@80000000 {
			reg = <0 0x80000000 0 0x1000000>;
			no-map;
		};

		vdev0vring0: vdev0vring0@88000000 {
			reg = <0 0x88000000 0 0x8000>;
			no-map;
		};

		vdev0vring1: vdev0vring1@88008000 {
			reg = <0 0x88008000 0 0x8000>;
			no-map;
		};

		vdev1vring0: vdev1vring0@88010000 {
			reg = <0 0x88010000 0 0x8000>;
			no-map;
		};

		vdev1vring1: vdev1vring1@88018000 {
			reg = <0 0x88018000 0 0x8000>;
			no-map;
		};

		vdevbuffer: vdevbuffer@88020000 {
			compatible = "shared-dma-pool";
			reg = <0 0x88020000 0 0x100000>;
			no-map;
		};

		rsc_table: rsc-table@88220000 {
			reg = <0 0x88220000 0 0x1000>;
			no-map;
		};
	};
};

/* Verdin ADC_1, ADC_2, ADC_3 and ADC_4 */
&adc1 {
	vref-supply = <&reg_1p8v>;
};

/* Verdin ETH_1 (On-module PHY) */
&enetc_port0 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enetc0>;
	phy-handle = <&ethphy1>;
	phy-mode = "rgmii-id";
};

/* Verdin ETH_2_RGMII */
&enetc_port1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_enetc1>;
};

/* Verdin CAN_1 */
&flexcan1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan1>;
};

/* Verdin CAN_2 */
&flexcan2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexcan2>;
};

/* Verdin QSPI_1 */
&flexspi1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_flexspi1>;
};

&gpio1 {
	gpio-line-names =
		"", /* 0 */
		"",
		"",
		"",
		"SODIMM_147",
		"SODIMM_149",
		"SODIMM_151",
		"SODIMM_153",
		"SODIMM_20",
		"SODIMM_22",
		"SODIMM_252", /* 10 */
		"",
		"SODIMM_189",
		"IO_EXP_INT",
		"SODIMM_256",
		"";

	status = "okay";
};

&gpio2 {
	gpio-line-names =
		"SODIMM_206", /* 0 */
		"SODIMM_198",
		"SODIMM_200",
		"SODIMM_196",
		"",
		"SODIMM_15",
		"SODIMM_16",
		"",
		"SODIMM_131",
		"SODIMM_129",
		"SODIMM_135", /* 10 */
		"SODIMM_133",
		"SODIMM_139",
		"SODIMM_137",
		"SODIMM_143",
		"SODIMM_141",
		"SODIMM_30",
		"SODIMM_38",
		"SODIMM_208",
		"SODIMM_19",
		"SODIMM_36", /* 20 */
		"SODIMM_34",
		"SODIMM_93",
		"SODIMM_95",
		"SODIMM_210",
		"SODIMM_24",
		"SODIMM_32",
		"SODIMM_26",
		"SODIMM_53",
		"SODIMM_55",
		"SODIMM_12", /* 30 */
		"SODIMM_14";
};

&gpio3 {
	gpio-line-names =
		"SODIMM_84", /* 0 */
		"SODIMM_78",
		"SODIMM_74",
		"SODIMM_80",
		"SODIMM_82",
		"SODIMM_70",
		"SODIMM_72",
		"SODIMM_76",
		"",
		"",
		"", /* 10 */
		"",
		"",
		"",
		"",
		"",
		"",
		"",
		"",
		"PMIC_SD2_VSEL",
		"", /* 20 */
		"",
		"",
		"",
		"",
		"",
		"SODIMM_91",
		"SODIMM_218",
		"",
		"",
		"", /* 30 */
		"";
};

&gpio4 {
	gpio-line-names =
		"SODIMM_59", /* 0 */
		"SODIMM_57",
		"",
		"",
		"",
		"",
		"",
		"",
		"",
		"",
		"", /* 10 */
		"",
		"",
		"",
		"SODIMM_193",
		"SODIMM_191",
		"SODIMM_215",
		"SODIMM_217",
		"SODIMM_219",
		"SODIMM_221",
		"SODIMM_211", /* 20 */
		"SODIMM_213",
		"SODIMM_199",
		"SODIMM_197",
		"SODIMM_201",
		"SODIMM_203",
		"SODIMM_205",
		"SODIMM_207",
		"SODIMM_216",
		"SODIMM_202";
};

&gpio5 {
	gpio-line-names =
		"SODIMM_56", /* 0 */
		"SODIMM_58",
		"SODIMM_60",
		"SODIMM_62",
		"SODIMM_46",
		"SODIMM_44",
		"SODIMM_42",
		"SODIMM_48",
		"SODIMM_66",
		"SODIMM_52",
		"SODIMM_54", /* 10 */
		"SODIMM_64",
		"SODIMM_212",
		"",
		"",
		"",
		"",
		"";
};

/* Verdin I2C_3_HDMI */
&i3c2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_i3c2>;
	i2c-scl-hz = <400000>;
};

/* CTRL_I2C (On-module I2C) */
&lpi2c2 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_lpi2c2>, <&pinctrl_io_exp_int>;
	pinctrl-1 = <&pinctrl_lpi2c2_gpio>, <&pinctrl_io_exp_int>;
	clock-frequency = <400000>;
	scl-gpios = <&gpio1 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio1 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	single-master;

	status = "okay";

	som_gpio_expander: gpio@20 {
		compatible = "nxp,pcal6416";
		reg = <0x20>;
		#interrupt-cells = <2>;
		interrupt-controller;
		interrupt-parent = <&gpio1>;
		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
		#gpio-cells = <2>;
		gpio-controller;

		gpio-line-names =
			"SODIMM_220", /* 0 */
			"SODIMM_222",
			"SODIMM_17",
			"SODIMM_21",
			"SODIMM_244",
			"SODIMM_161",
			"SODIMM_157",
			"SODIMM_155",
			"SODIMM_185",
			"SODIMM_187",
			"USB_RECOV_CTRL#", /* 10 */
			"ENET1_INT#",
			"TPM_INT#",
			"TPM_CS#",
			"",
			"";

		/*
		 * Switch USB to default position:
		 *   - SoC USB2 -> Verdin USB_1
		 *   - SoC USB1 -> Verdin USB_2
		 * Reset configuration:
		 *   - SoC USB1 -> Verdin USB_1 (USB recovery)
		 *   - SoC USB2 not connected
		 */
		usb_recov_ctrl: usb-recov-ctrl-hog {
			gpio-hog;
			gpios = <10 GPIO_ACTIVE_HIGH>;
			line-name = "USB_RECOV_CTRL#";
			output-high;
		};
	};

	rtc_i2c: rtc@32 {
		compatible = "epson,rx8130";
		reg = <0x32>;
	};

	temperature-sensor@48 {
		compatible = "ti,tmp1075";
		reg = <0x48>;
	};

	som_eeprom: eeprom@50 {
		compatible = "st,24c02", "atmel,24c02";
		reg = <0x50>;
		pagesize = <16>;
	};
};

/* Verdin I2C_2_DSI */
&lpi2c3 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_lpi2c3>;
	pinctrl-1 = <&pinctrl_lpi2c3_gpio>;
	clock-frequency = <100000>;
	scl-gpios = <&gpio2 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio2 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	single-master;
};

/* Verdin I2C_1 */
&lpi2c4 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_lpi2c4>;
	pinctrl-1 = <&pinctrl_lpi2c4_gpio>;
	clock-frequency = <100000>;
	scl-gpios = <&gpio2 31 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio2 30 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	single-master;
};

/* Verdin I2C_4_CSI */
&lpi2c5 {
	pinctrl-names = "default", "gpio";
	pinctrl-0 = <&pinctrl_lpi2c5>;
	pinctrl-1 = <&pinctrl_lpi2c5_gpio>;
	clock-frequency = <100000>;
	scl-gpios = <&gpio2 23 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	sda-gpios = <&gpio2 22 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
	single-master;
};

/* Verdin SPI_1 */
&lpspi6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_lpspi6>, <&pinctrl_spi1_cs>;
	cs-gpios = <&gpio4 29 GPIO_ACTIVE_LOW>,
		   <&som_gpio_expander 13 GPIO_ACTIVE_LOW>;

	status = "okay";

	som_tpm: tpm@1 {
		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
		reg = <0x1>;
		interrupt-parent = <&som_gpio_expander>;
		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;
		/*
		 * Maximum TPM-supported speed is 18.5 MHz, limited to 12 MHz
		 * here as lpspi6's per-clock (twice the max speed) is 24 MHz
		 */
		spi-max-frequency = <12000000>;
	};
};

/* Verdin UART_3, used as the Linux console */
&lpuart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
};

/* Verdin UART_4 */
&lpuart2 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart2>;
};

/* Verdin UART_1 */
&lpuart7 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart7>;
	uart-has-rtscts;
};

/* Verdin UART_2 */
&lpuart8 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart8>;
	uart-has-rtscts;
};

&mu7 {
	status = "okay";
};

&netc_blk_ctrl {
	status = "okay";
};

&netc_bus0 {
	msi-map = <0x0 &its 0x60 0x1>,	//ENETC0 PF
		  <0x10 &its 0x61 0x1>, //ENETC0 VF0
		  <0x20 &its 0x62 0x1>, //ENETC0 VF1
		  <0x40 &its 0x63 0x1>, //ENETC1 PF
		  <0x50 &its 0x65 0x1>, //ENETC1 VF0
		  <0x60 &its 0x66 0x1>, //ENETC1 VF1
		  <0x80 &its 0x64 0x1>, //ENETC2 PF
		  <0xc0 &its 0x67 0x1>; //NETC Timer
	iommu-map = <0x0 &smmu 0x20 0x1>,
		    <0x10 &smmu 0x21 0x1>,
		    <0x20 &smmu 0x22 0x1>,
		    <0x40 &smmu 0x23 0x1>,
		    <0x50 &smmu 0x25 0x1>,
		    <0x60 &smmu 0x26 0x1>,
		    <0x80 &smmu 0x24 0x1>,
		    <0xc0 &smmu 0x27 0x1>;
};

/* Verdin ETH_2_RGMII_MDIO, shared between all ethernet ports */
&netc_emdio {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_emdio>;

	status = "okay";

	ethphy1: ethernet-phy@0 {
		reg = <0>;
		interrupt-parent = <&som_gpio_expander>;
		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
		ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
	};
};

&netc_timer {
	status = "okay";
};

&netcmix_blk_ctrl {
	status = "okay";
};

/* Verdin PCIE_1 */
&pcie0 {
	/* PCIE_1_RESET# (SODIMM 244) */
	reset-gpios = <&som_gpio_expander 4 GPIO_ACTIVE_LOW>;
};

/* Verdin I2S_1 */
&sai3 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_sai3>;
	assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>,
			  <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>,
			  <&scmi_clk IMX95_CLK_AUDIOPLL1>,
			  <&scmi_clk IMX95_CLK_AUDIOPLL2>,
			  <&scmi_clk IMX95_CLK_SAI3>;
	assigned-clock-parents = <0>, <0>, <0>, <0>,
				 <&scmi_clk IMX95_CLK_AUDIOPLL1>;
	assigned-clock-rates = <3932160000>,
			       <3612672000>, <393216000>,
			       <361267200>, <12288000>;
	#sound-dai-cells = <0>;
	fsl,sai-mclk-direction-output;
};

&scmi_bbm {
	linux,code = <KEY_POWER>;
};

&thermal_zones {
	/* PF09 Main PMIC */
	pf09-thermal {
		polling-delay = <2000>;
		polling-delay-passive = <250>;
		thermal-sensors = <&scmi_sensor 2>;

		trips {
			trip0 {
				hysteresis = <2000>;
				temperature = <155000>;
				type = "critical";
			};
		};
	};

	/* PF53 VDD_ARM PMIC */
	pf53-arm-thermal {
		polling-delay = <2000>;
		polling-delay-passive = <250>;
		thermal-sensors = <&scmi_sensor 4>;

		trips {
			trip0 {
				hysteresis = <2000>;
				temperature = <155000>;
				type = "critical";
			};
		};
	};

	/* PF53 VDD_SOC PMIC */
	pf53-soc-thermal {
		polling-delay = <2000>;
		polling-delay-passive = <250>;
		thermal-sensors = <&scmi_sensor 3>;

		trips {
			trip0 {
				hysteresis = <2000>;
				temperature = <155000>;
				type = "critical";
			};
		};
	};
};

/* Verdin PWM_1 */
&tpm4 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_tpm4>;
};

/* Verdin PWM_2 */
&tpm5 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_tpm5>;
};

/* Verdin PWM_3_DSI */
&tpm6 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_tpm6>;
};

/* Verdin USB_1 */
&usb2 {
	dr_mode = "otg";
	adp-disable;
	hnp-disable;
	srp-disable;
	usb-role-switch;
	vbus-supply = <&reg_usb1_vbus>;

	port {
		usb1_id: endpoint {
			remote-endpoint = <&usb_dr_connector>;
		};
	};
};

/* Verdin USB_2 */
&usb3 {
	fsl,disable-port-power-control;
};

&usb3_dwc3 {
	dr_mode = "host";
};

&usb3_phy {
	vbus-supply = <&reg_usb2_vbus>;
};

/* On-module eMMC */
&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
	bus-width = <8>;
	non-removable;
	no-sdio;
	no-sd;

	status = "okay";
};

/* Verdin SD_1 */
&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
	pinctrl-1 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_cd>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>,<&pinctrl_usdhc2_cd>;
	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_cd>;
	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
	vmmc-supply = <&reg_usdhc2_vmmc>;
	vqmmc-supply = <&reg_usdhc2_vqmmc>;
};

&wdog3 {
	fsl,ext-reset-output;

	status = "okay";
};

&scmi_iomuxc {
	/* On-module Bluetooth on WB SKUs, module-specific UART otherwise */
	pinctrl_bt_uart: btuartgrp {
		fsl,pins = <IMX95_PAD_GPIO_IO04__LPUART6_TX	0x31e>, /* WiFi_UART_SoC_TXD */
			   <IMX95_PAD_GPIO_IO33__LPUART6_RX	0x31e>, /* WiFi_UART_SoC_RXD */
			   <IMX95_PAD_GPIO_IO34__LPUART6_CTS_B	0x31e>, /* WiFi_UART_SoC_CTS */
			   <IMX95_PAD_GPIO_IO07__LPUART6_RTS_B	0x31e>; /* WiFi_UART_SoC_RTS */
	};

	/* Verdin CSI_1_MCLK */
	pinctrl_csi1_mclk: csi1mclkgrp {
		fsl,pins = <IMX95_PAD_CCM_CLKO1__CCMSRCGPCMIX_TOP_CLKO_1	0x51e>; /* SODIMM 91 */
	};

	/* Verdin CTRL_SLEEP_MOCI# */
	pinctrl_ctrl_sleep_moci: ctrlsleepmocigrp {
		fsl,pins = <IMX95_PAD_SAI1_RXD0__AONMIX_TOP_GPIO1_IO_BIT14	0x51e>; /* SODIMM 256 */
	};

	/* Verdin CTRL_WAKE1_MICO# */
	pinctrl_ctrl_wake1_mico: ctrlwake1micogrp {
		fsl,pins = <IMX95_PAD_PDM_BIT_STREAM1__AONMIX_TOP_GPIO1_IO_BIT10	0x31e>; /* SODIMM 252 */
	};

	/* Verdin ETH_2_RGMII_MDIO, shared between all ethernet ports */
	pinctrl_emdio: emdiogrp {
		fsl,pins = <IMX95_PAD_ENET2_MDC__NETCMIX_TOP_NETC_MDC	0x50e>, /* ENET2_MDC, SODIMM 193 */
			   <IMX95_PAD_ENET2_MDIO__NETCMIX_TOP_NETC_MDIO	0x90e>; /* ENET2_MDIO, SODIMM 191 */
	};

	/* Verdin ETH_1 (On-module PHY) */
	pinctrl_enetc0: enetc0grp {
		fsl,pins = <IMX95_PAD_ENET1_TX_CTL__NETCMIX_TOP_ETH0_RGMII_TX_CTL	0x57e>, /* ENET1_TX_CTL */
			   <IMX95_PAD_ENET1_TXC__NETCMIX_TOP_ETH0_RGMII_TX_CLK		0x58e>, /* ENET1_TXC    */
			   <IMX95_PAD_ENET1_TD0__NETCMIX_TOP_ETH0_RGMII_TD0		0x50e>, /* ENET1_TDO    */
			   <IMX95_PAD_ENET1_TD1__NETCMIX_TOP_ETH0_RGMII_TD1		0x50e>, /* ENET1_TD1    */
			   <IMX95_PAD_ENET1_TD2__NETCMIX_TOP_ETH0_RGMII_TD2		0x50e>, /* ENET1_TD2    */
			   <IMX95_PAD_ENET1_TD3__NETCMIX_TOP_ETH0_RGMII_TD3		0x50e>, /* ENET1_TD3    */
			   <IMX95_PAD_ENET1_RX_CTL__NETCMIX_TOP_ETH0_RGMII_RX_CTL	0x57e>, /* ENET1_RX_CTL */
			   <IMX95_PAD_ENET1_RXC__NETCMIX_TOP_ETH0_RGMII_RX_CLK		0x58e>, /* ENET1_RXC    */
			   <IMX95_PAD_ENET1_RD0__NETCMIX_TOP_ETH0_RGMII_RD0		0x57e>, /* ENET1_RD0    */
			   <IMX95_PAD_ENET1_RD1__NETCMIX_TOP_ETH0_RGMII_RD1		0x57e>, /* ENET1_RD1    */
			   <IMX95_PAD_ENET1_RD2__NETCMIX_TOP_ETH0_RGMII_RD2		0x57e>, /* ENET1_RD2    */
			   <IMX95_PAD_ENET1_RD3__NETCMIX_TOP_ETH0_RGMII_RD3		0x57e>; /* ENET1_RD3    */
	};

	/* Verdin ETH_2_RGMII */
	pinctrl_enetc1: enetc1grp {
		fsl,pins = <IMX95_PAD_ENET2_TX_CTL__NETCMIX_TOP_ETH1_RGMII_TX_CTL	0x57e>, /* ENET2_TX_CTL */
			   <IMX95_PAD_ENET2_TXC__NETCMIX_TOP_ETH1_RGMII_TX_CLK		0x58e>, /* ENET2_TXC    */
			   <IMX95_PAD_ENET2_TD0__NETCMIX_TOP_ETH1_RGMII_TD0		0x50e>, /* ENET2_TD0    */
			   <IMX95_PAD_ENET2_TD1__NETCMIX_TOP_ETH1_RGMII_TD1		0x50e>, /* ENET2_TD1    */
			   <IMX95_PAD_ENET2_TD2__NETCMIX_TOP_ETH1_RGMII_TD2		0x50e>, /* ENET2_TD2    */
			   <IMX95_PAD_ENET2_TD3__NETCMIX_TOP_ETH1_RGMII_TD3		0x50e>, /* ENET2_TD3    */
			   <IMX95_PAD_ENET2_RX_CTL__NETCMIX_TOP_ETH1_RGMII_RX_CTL	0x57e>, /* ENET2_RX_CTL */
			   <IMX95_PAD_ENET2_RXC__NETCMIX_TOP_ETH1_RGMII_RX_CLK		0x58e>, /* ENET2_RXC    */
			   <IMX95_PAD_ENET2_RD0__NETCMIX_TOP_ETH1_RGMII_RD0		0x57e>, /* ENET2_RD0    */
			   <IMX95_PAD_ENET2_RD1__NETCMIX_TOP_ETH1_RGMII_RD1		0x57e>, /* ENET2_RD1    */
			   <IMX95_PAD_ENET2_RD2__NETCMIX_TOP_ETH1_RGMII_RD2		0x57e>, /* ENET2_RD2    */
			   <IMX95_PAD_ENET2_RD3__NETCMIX_TOP_ETH1_RGMII_RD3		0x57e>; /* ENET2_RD3    */
	};

	/* Verdin ETH_2_RGMII_INT#  */
	pinctrl_eth2_rgmii_int: eth2rgmiiintgrp {
		fsl,pins = <IMX95_PAD_SAI1_TXC__AONMIX_TOP_GPIO1_IO_BIT12	0x31e>; /* SODIMM 189 */
	};

	/* Verdin CAN_1 */
	pinctrl_flexcan1: flexcan1grp {
		fsl,pins = <IMX95_PAD_PDM_CLK__AONMIX_TOP_CAN1_TX		0x39e>, /* SODIMM 20 */
			   <IMX95_PAD_PDM_BIT_STREAM0__AONMIX_TOP_CAN1_RX	0x39e>; /* SODIMM 22 */
	};

	/* Verdin CAN_2 */
	pinctrl_flexcan2: flexcan2grp {
		fsl,pins = <IMX95_PAD_GPIO_IO25__CAN2_TX	0x39e>, /* SODIMM 24 */
			   <IMX95_PAD_GPIO_IO27__CAN2_RX	0x39e>; /* SODIMM 26 */
	};

	/* Verdin QSPI_1 */
	pinctrl_flexspi1: flexspi1grp {
		fsl,pins = <IMX95_PAD_XSPI1_SS0_B__FLEXSPI1_A_SS0_B	0x3fe>, /* SODIMM 54 */
			   <IMX95_PAD_XSPI1_SS1_B__FLEXSPI1_A_SS1_B	0x3fe>, /* SODIMM 64 */
			   <IMX95_PAD_XSPI1_SCLK__XSPI_CLK		0x3fe>, /* SODIMM 52 */
			   <IMX95_PAD_XSPI1_DATA0__XSPI_DATA_BIT0	0x3fe>, /* SODIMM 56 */
			   <IMX95_PAD_XSPI1_DATA1__XSPI_DATA_BIT1	0x3fe>, /* SODIMM 58 */
			   <IMX95_PAD_XSPI1_DATA2__XSPI_DATA_BIT2	0x3fe>, /* SODIMM 60 */
			   <IMX95_PAD_XSPI1_DATA3__XSPI_DATA_BIT3	0x3fe>, /* SODIMM 62 */
			   <IMX95_PAD_XSPI1_DQS__XSPI_DQS		0x3fe>; /* SODIMM 66 */
	};

	/* Verdin GPIO_1 */
	pinctrl_gpio1: gpio1grp {
		fsl,pins = <IMX95_PAD_GPIO_IO00__GPIO2_IO_BIT0	0x51e>; /* SODIMM 206 */
	};

	/* Verdin GPIO_2 */
	pinctrl_gpio2: gpio2grp {
		fsl,pins = <IMX95_PAD_GPIO_IO18__GPIO2_IO_BIT18	0x51e>; /* SODIMM 208 */
	};

	/* Verdin GPIO_3 */
	pinctrl_gpio3: gpio3grp {
		fsl,pins = <IMX95_PAD_GPIO_IO24__GPIO2_IO_BIT24	0x51e>; /* SODIMM 210 */
	};

	/* Verdin GPIO_4 */
	pinctrl_gpio4: gpio4grp {
		fsl,pins = <IMX95_PAD_GPIO_IO32__GPIO5_IO_BIT12	0x51e>; /* SODIMM 212 */
	};

	/* Verdin GPIO_5_CSI */
	pinctrl_gpio5: gpio5grp {
		fsl,pins = <IMX95_PAD_CCM_CLKO3__GPIO4_IO_BIT28	0x51e>; /* SODIMM 216 */
	};

	/* Verdin GPIO_6_CSI */
	pinctrl_gpio6: gpio6grp {
		fsl,pins = <IMX95_PAD_CCM_CLKO2__GPIO3_IO_BIT27	0x51e>; /* SODIMM 218 */
	};

	/* Verdin I2S_2_BCLK as GPIO (conflict with Verdin I2S_2) */
	pinctrl_i2s_2_bclk_gpio: i2s2bclkgpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA6__GPIO5_IO_BIT6	0x51e>; /* SODIMM 42 */
	};

	/* Verdin I2S_2_D_IN as GPIO (conflict with Verdin I2S_2) */
	pinctrl_i2s_2_d_in_gpio: i2s2dingpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA7__GPIO5_IO_BIT7	0x31e>; /* SODIMM 48 */
	};

	/* Verdin I2S_2_D_OUT as GPIO (conflict with Verdin I2S_2) */
	pinctrl_i2s_2_d_out_gpio: i2s2doutgpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA4__GPIO5_IO_BIT4	0x51e>; /* SODIMM 46 */
	};

	/* Verdin I2S_2_SYNC as GPIO (conflict with Verdin I2S_2) */
	pinctrl_i2s_2_sync_gpio: i2s2syncgpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA5__GPIO5_IO_BIT5	0x51e>; /* SODIMM 44 */
	};

	/* Verdin I2C_3_HDMI */
	pinctrl_i3c2: i3c2cgrp {
		fsl,pins = <IMX95_PAD_ENET1_MDC__I3C2_SCL	0x40001186>, /* SODIMM 59 */
			   <IMX95_PAD_ENET1_MDIO__I3C2_SDA	0x40001186>; /* SODIMM 57 */
	};

	pinctrl_io_exp_int: ioexpintgrp {
		fsl,pins = <IMX95_PAD_SAI1_TXD0__AONMIX_TOP_GPIO1_IO_BIT13	0x31e>; /* IO_EXP_INT */
	};

	/* CTRL_I2C (On-module I2C) */
	pinctrl_lpi2c2_gpio: lpi2c2gpiogrp {
		fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_GPIO1_IO_BIT2	0x40001b9e>, /* CTRL_I2C_SCL */
			   <IMX95_PAD_I2C2_SDA__AONMIX_TOP_GPIO1_IO_BIT3	0x40001b9e>; /* CTRL_I2C_SDA */
	};

	pinctrl_lpi2c2: lpi2c2grp {
		fsl,pins = <IMX95_PAD_I2C2_SCL__AONMIX_TOP_LPI2C2_SCL	0x40001b9e>, /* CTRL_I2C_SCL */
			   <IMX95_PAD_I2C2_SDA__AONMIX_TOP_LPI2C2_SDA	0x40001b9e>; /* CTRL_I2C_SDA */
	};

	/* Verdin I2C_2_DSI */
	pinctrl_lpi2c3_gpio: lpi2c3gpiogrp {
		fsl,pins = <IMX95_PAD_GPIO_IO28__GPIO2_IO_BIT28	0x40001b9e>, /* SODIMM 53 */
			   <IMX95_PAD_GPIO_IO29__GPIO2_IO_BIT29	0x40001b9e>; /* SODIMM 55 */
	};

	pinctrl_lpi2c3: lpi2c3grp {
		fsl,pins = <IMX95_PAD_GPIO_IO28__LPI2C3_SDA	0x40001b9e>, /* SODIMM 53 */
			   <IMX95_PAD_GPIO_IO29__LPI2C3_SCL	0x40001b9e>; /* SODIMM 55 */
	};

	/* Verdin I2C_1 */
	pinctrl_lpi2c4_gpio: lpi2c4gpiogrp {
		fsl,pins = <IMX95_PAD_GPIO_IO31__GPIO2_IO_BIT31	0x40001b9e>, /* SODIMM 14 */
			   <IMX95_PAD_GPIO_IO30__GPIO2_IO_BIT30	0x40001b9e>; /* SODIMM 12 */
	};

	pinctrl_lpi2c4: lpi2c4grp {
		fsl,pins = <IMX95_PAD_GPIO_IO31__LPI2C4_SCL	0x40001b9e>, /* SODIMM 14 */
			   <IMX95_PAD_GPIO_IO30__LPI2C4_SDA	0x40001b9e>; /* SODIMM 12 */
	};

	/* Verdin I2C_4_CSI */
	pinctrl_lpi2c5_gpio: lpi2c5gpiogrp {
		fsl,pins = <IMX95_PAD_GPIO_IO22__GPIO2_IO_BIT22	0x40001b9e>, /* SODIMM 93 */
			   <IMX95_PAD_GPIO_IO23__GPIO2_IO_BIT23	0x40001b9e>; /* SODIMM 95 */
	};

	pinctrl_lpi2c5: lpi2c5grp {
		fsl,pins = <IMX95_PAD_GPIO_IO22__LPI2C5_SDA	0x40001b9e>, /* SODIMM 93 */
			   <IMX95_PAD_GPIO_IO23__LPI2C5_SCL	0x40001b9e>; /* SODIMM 95 */
	};

	/* Verdin SPI_1 */
	pinctrl_lpspi6: lpspi6grp {
		fsl,pins = <IMX95_PAD_GPIO_IO01__LPSPI6_SIN	0x3fe>, /* SODIMM 198 */
			   <IMX95_PAD_GPIO_IO02__LPSPI6_SOUT	0x3fe>, /* SODIMM 200 */
			   <IMX95_PAD_GPIO_IO03__LPSPI6_SCK	0x3fe>; /* SODIMM 196 */
	};

	/* Verdin QSPI_1_CLK as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_clk_gpio: qspi1clkgpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_SCLK__GPIO5_IO_BIT9		0x11e>; /* SODIMM 52 */
	};

	/* Verdin QSPI_1_CS2# as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_cs2_gpio: qspi1cs2gpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_SS1_B__GPIO5_IO_BIT11	0x11e>; /* SODIMM 64 */
	};

	/* Verdin QSPI_1_CS# as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_cs_gpio: qspi1csgpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_SS0_B__GPIO5_IO_BIT10	0x11e>; /* SODIMM 54 */
	};

	/* Verdin QSPI_1_DQS as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_dqs_gpio: qspi1dqsgpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DQS__GPIO5_IO_BIT8		0x11e>; /* SODIMM 66 */
	};

	/* Verdin QSPI_1_IO0 as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_io0_gpio: qspi1io0gpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA0__GPIO5_IO_BIT0	0x119e>; /* SODIMM 56 */
	};

	/* Verdin QSPI_1_IO1 as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_io1_gpio: qspi1io1gpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA1__GPIO5_IO_BIT1	0x119e>; /* SODIMM 58 */
	};

	/* Verdin QSPI_1_IO2 as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_io2_gpio: qspi1io2gpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA2__GPIO5_IO_BIT2	0x11e>; /* SODIMM 60 */
	};

	/* Verdin QSPI_1_IO3 as GPIO (conflict with Verdin QSPI_1 interface) */
	pinctrl_qspi1_io3_gpio: qspi1io3gpiogrp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA3__GPIO5_IO_BIT3	0x11e>; /* SODIMM 62 */
	};

	/* Verdin I2S_1 */
	pinctrl_sai3: sai3grp {
		fsl,pins = <IMX95_PAD_GPIO_IO16__SAI3_TX_BCLK		0x11e>, /* SODIMM 30 */
			   <IMX95_PAD_GPIO_IO20__SAI3_RX_DATA_BIT0	0x11e>, /* SODIMM 36 */
			   <IMX95_PAD_GPIO_IO21__SAI3_TX_DATA_BIT0	0x11e>, /* SODIMM 34 */
			   <IMX95_PAD_GPIO_IO26__SAI3_TX_SYNC		0x11e>; /* SODIMM 32 */
	};

	/* Verdin I2S_1_MCLK */
	pinctrl_sai3_mclk: sai3mclkgrp {
		fsl,pins = <IMX95_PAD_GPIO_IO17__SAI3_MCLK	0x31e>; /* SODIMM 38 */
	};

	/* Verdin I2S_2 */
	pinctrl_sai5: sai5grp {
		fsl,pins = <IMX95_PAD_XSPI1_DATA4__SAI5_TX_DATA_BIT0	0x11e>, /* SODIMM 46 */
			   <IMX95_PAD_XSPI1_DATA5__SAI5_TX_SYNC		0x11e>, /* SODIMM 44 */
			   <IMX95_PAD_XSPI1_DATA6__SAI5_TX_BCLK		0x11e>, /* SODIMM 42 */
			   <IMX95_PAD_XSPI1_DATA7__SAI5_RX_DATA_BIT0	0x11e>; /* SODIMM 48 */
	};

	/* Verdin SPI_1_CS */
	pinctrl_spi1_cs: spi1csgrp {
		fsl,pins = <IMX95_PAD_CCM_CLKO4__GPIO4_IO_BIT29	0x3fe>; /* SODIMM 202 */
	};

	/* Verdin PWM_1 */
	pinctrl_tpm4: tpm4grp {
		fsl,pins = <IMX95_PAD_GPIO_IO05__TPM4_CH0	0x11e>; /* SODIMM 15 */
	};

	/* Verdin PWM_2 */
	pinctrl_tpm5: tpm5grp {
		fsl,pins = <IMX95_PAD_GPIO_IO06__TPM5_CH0	0x11e>; /* SODIMM 16 */
	};

	/* Verdin PWM_3_DSI as GPIO */
	pinctrl_tpm6_gpio: tpm6gpiogrp {
		fsl,pins = <IMX95_PAD_GPIO_IO19__GPIO2_IO_BIT19	0x51e>; /* SODIMM 19 */
	};

	/* Verdin PWM_3_DSI */
	pinctrl_tpm6: tpm6grp {
		fsl,pins = <IMX95_PAD_GPIO_IO19__TPM6_CH2	0x11e>; /* SODIMM 19 */
	};

	/* Verdin UART_3, used as the Linux Console */
	pinctrl_uart1: uart1grp {
		fsl,pins = <IMX95_PAD_UART1_RXD__AONMIX_TOP_LPUART1_RX	0x31e>, /* SODIMM 147 */
			   <IMX95_PAD_UART1_TXD__AONMIX_TOP_LPUART1_TX	0x31e>; /* SODIMM 149 */
	};

	/* Verdin UART_4 */
	pinctrl_uart2: uart2grp {
		fsl,pins = <IMX95_PAD_UART2_RXD__AONMIX_TOP_LPUART2_RX	0x31e>, /* SODIMM 151 */
			   <IMX95_PAD_UART2_TXD__AONMIX_TOP_LPUART2_TX	0x31e>; /* SODIMM 153 */
	};

	/* Verdin UART_1 */
	pinctrl_uart7: uart7grp {
		fsl,pins = <IMX95_PAD_GPIO_IO08__LPUART7_TX	0x31e>, /* SODIMM 131 */
			   <IMX95_PAD_GPIO_IO09__LPUART7_RX	0x31e>, /* SODIMM 129 */
			   <IMX95_PAD_GPIO_IO10__LPUART7_CTS_B	0x31e>, /* SODIMM 135 */
			   <IMX95_PAD_GPIO_IO11__LPUART7_RTS_B	0x31e>; /* SODIMM 133 */
	};

	/* Verdin UART_2 */
	pinctrl_uart8: uart8grp {
		fsl,pins = <IMX95_PAD_GPIO_IO12__LPUART8_TX	0x31e>, /* SODIMM 139 */
			   <IMX95_PAD_GPIO_IO13__LPUART8_RX	0x31e>, /* SODIMM 137 */
			   <IMX95_PAD_GPIO_IO14__LPUART8_CTS_B	0x31e>, /* SODIMM 143 */
			   <IMX95_PAD_GPIO_IO15__LPUART8_RTS_B	0x31e>; /* SODIMM 141 */
	};

	/* On-module eMMC */
	pinctrl_usdhc1: usdhc1grp {
		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x158e>, /* SD1_CLK    */
			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x138e>, /* SD1_CMD    */
			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x138e>, /* SD1_DATA0  */
			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x138e>, /* SD1_DATA1  */
			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x138e>, /* SD1_DATA2  */
			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x138e>, /* SD1_DATA3  */
			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x138e>, /* SD1_DATA4  */
			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x138e>, /* SD1_DATA5  */
			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x138e>, /* SD1_DATA6  */
			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x138e>, /* SD1_DATA7  */
			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x158e>; /* SD1_STROBE */
	};

	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
		fsl,pins = <IMX95_PAD_SD1_CLK__USDHC1_CLK	0x15fe>, /* SD1_CLK    */
			   <IMX95_PAD_SD1_CMD__USDHC1_CMD	0x13fe>, /* SD1_CMD    */
			   <IMX95_PAD_SD1_DATA0__USDHC1_DATA0	0x13fe>, /* SD1_DATA0  */
			   <IMX95_PAD_SD1_DATA1__USDHC1_DATA1	0x13fe>, /* SD1_DATA1  */
			   <IMX95_PAD_SD1_DATA2__USDHC1_DATA2	0x13fe>, /* SD1_DATA2  */
			   <IMX95_PAD_SD1_DATA3__USDHC1_DATA3	0x13fe>, /* SD1_DATA3  */
			   <IMX95_PAD_SD1_DATA4__USDHC1_DATA4	0x13fe>, /* SD1_DATA4  */
			   <IMX95_PAD_SD1_DATA5__USDHC1_DATA5	0x13fe>, /* SD1_DATA5  */
			   <IMX95_PAD_SD1_DATA6__USDHC1_DATA6	0x13fe>, /* SD1_DATA6  */
			   <IMX95_PAD_SD1_DATA7__USDHC1_DATA7	0x13fe>, /* SD1_DATA7  */
			   <IMX95_PAD_SD1_STROBE__USDHC1_STROBE	0x15fe>; /* SD1_STROBE */
	};

	/* Verdin SD_1 */
	pinctrl_usdhc2: usdhc2grp {
		fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK	0x158e>, /* SODIMM 78 */
			   <IMX95_PAD_SD2_CMD__USDHC2_CMD	0x138e>, /* SODIMM 74 */
			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x138e>, /* SODIMM 80 */
			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x138e>, /* SODIMM 82 */
			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x138e>, /* SODIMM 70 */
			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x138e>; /* SODIMM 72 */
	};

	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
		fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK	0x15fe>, /* SODIMM 78 */
			   <IMX95_PAD_SD2_CMD__USDHC2_CMD	0x13fe>, /* SODIMM 74 */
			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x13fe>, /* SODIMM 80 */
			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x13fe>, /* SODIMM 82 */
			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x13fe>, /* SODIMM 70 */
			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x13fe>; /* SODIMM 72 */
	};

	pinctrl_usdhc2_sleep: usdhc2-sleepgrp {
		fsl,pins = <IMX95_PAD_SD2_CLK__USDHC2_CLK	0x400>, /* SODIMM 78 */
			   <IMX95_PAD_SD2_CMD__USDHC2_CMD	0x400>, /* SODIMM 74 */
			   <IMX95_PAD_SD2_DATA0__USDHC2_DATA0	0x400>, /* SODIMM 80 */
			   <IMX95_PAD_SD2_DATA1__USDHC2_DATA1	0x400>, /* SODIMM 82 */
			   <IMX95_PAD_SD2_DATA2__USDHC2_DATA2	0x400>, /* SODIMM 70 */
			   <IMX95_PAD_SD2_DATA3__USDHC2_DATA3	0x400>; /* SODIMM 72 */
	};

	/* Verdin SD_1_CD# */
	pinctrl_usdhc2_cd: usdhc2-cdgrp {
		fsl,pins = <IMX95_PAD_SD2_CD_B__GPIO3_IO_BIT0	0x1100>; /* SODIMM 84 */
	};

	/* Verdin SD_1_PWR_EN */
	pinctrl_usdhc2_pwr_en: usdhc2-pwrengrp {
		fsl,pins = <IMX95_PAD_SD2_RESET_B__GPIO3_IO_BIT7	0x11e>; /* SODIMM 76 */
	};

	pinctrl_usdhc2_vsel: usdhc2-vselgrp {
		fsl,pins = <IMX95_PAD_SD2_VSELECT__GPIO3_IO_BIT19	0x4>; /* PMIC_SD2_VSEL */
	};

	/* On-module Wi-Fi on WB SKUs, module-specific SDIO otherwise */
	pinctrl_usdhc3: usdhc3grp {
		fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK	0x158e>, /* SD3_CLK   */
			   <IMX95_PAD_SD3_CMD__USDHC3_CMD	0x138e>, /* SD3_CMD   */
			   <IMX95_PAD_SD3_DATA0__USDHC3_DATA0	0x138e>, /* SD3_DATA0 */
			   <IMX95_PAD_SD3_DATA1__USDHC3_DATA1	0x138e>, /* SD3_DATA1 */
			   <IMX95_PAD_SD3_DATA2__USDHC3_DATA2	0x138e>, /* SD3_DATA2 */
			   <IMX95_PAD_SD3_DATA3__USDHC3_DATA3	0x138e>; /* SD3_DATA3 */
	};

	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
		fsl,pins = <IMX95_PAD_SD3_CLK__USDHC3_CLK	0x15fe>, /* SD3_CLK   */
			   <IMX95_PAD_SD3_CMD__USDHC3_CMD	0x13fe>, /* SD3_CMD   */
			   <IMX95_PAD_SD3_DATA0__USDHC3_DATA0	0x13fe>, /* SD3_DATA1 */
			   <IMX95_PAD_SD3_DATA1__USDHC3_DATA1	0x13fe>, /* SD3_DATA2 */
			   <IMX95_PAD_SD3_DATA2__USDHC3_DATA2	0x13fe>, /* SD3_DATA3 */
			   <IMX95_PAD_SD3_DATA3__USDHC3_DATA3	0x13fe>; /* SD3_DATA4 */
	};

	pinctrl_wifi_pwr_en: wifipwrengrp {
		fsl,pins = <IMX95_PAD_SAI1_TXFS__AONMIX_TOP_GPIO1_IO_BIT11	0x51e>; /* PMIC_EN_WIFI */
	};
};