xref: /linux/scripts/dtc/include-prefixes/arm64/allwinner/sun50i-h6-taiqicat-a01.dts (revision 0fc8f6200d2313278fbf4539bbab74677c685531) 
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2// Copyright (C) 2026 Jun Yan <jerrysteve1101@gmail.com>
3
4/dts-v1/;
5
6#include "sun50i-h6.dtsi"
7#include "sun50i-h6-cpu-opp.dtsi"
8#include "sun50i-h6-gpu-opp.dtsi"
9
10#include <dt-bindings/gpio/gpio.h>
11
12/ {
13	model = "TaiqiCat (TQC) A01";
14	compatible = "ultrapower,taiqicat-a01", "allwinner,sun50i-h6";
15
16	aliases {
17		ethernet1 = &sdio_wifi;
18		serial0 = &uart0;
19	};
20
21	chosen {
22		stdout-path = "serial0:115200n8";
23	};
24
25	connector {
26		compatible = "hdmi-connector";
27		ddc-en-gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */
28		type = "a";
29
30		port {
31			hdmi_con_in: endpoint {
32				remote-endpoint = <&hdmi_out_con>;
33			};
34		};
35	};
36
37	ext_osc32k: ext-osc32k-clk {
38		#clock-cells = <0>;
39		compatible = "fixed-clock";
40		clock-frequency = <32768>;
41		clock-output-names = "ext_osc32k";
42	};
43
44	leds {
45		compatible = "gpio-leds";
46
47		led-0 {
48			label = "taiqicat:blue:power";
49			gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */
50			default-state = "on";
51		};
52	};
53
54	reg_vcc5v: vcc5v {
55		/* board wide 5V supply directly from the DC jack */
56		compatible = "regulator-fixed";
57		regulator-name = "vcc-5v";
58		regulator-min-microvolt = <5000000>;
59		regulator-max-microvolt = <5000000>;
60		regulator-always-on;
61	};
62
63	sound-spdif {
64		compatible = "simple-audio-card";
65		simple-audio-card,name = "sun50i-h6-spdif";
66
67		simple-audio-card,cpu {
68			sound-dai = <&spdif>;
69		};
70
71		simple-audio-card,codec {
72			sound-dai = <&spdif_out>;
73		};
74	};
75
76	spdif_out: spdif-out {
77		#sound-dai-cells = <0>;
78		compatible = "linux,spdif-dit";
79	};
80
81	wifi_pwrseq: wifi-pwrseq {
82		compatible = "mmc-pwrseq-simple";
83		clocks = <&rtc CLK_OSC32K_FANOUT>;
84		clock-names = "ext_clock";
85		reset-gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */
86		post-power-on-delay-ms = <200>;
87	};
88};
89
90&cpu0 {
91	cpu-supply = <&reg_dcdca>;
92};
93
94&de {
95	status = "okay";
96};
97
98&dwc3 {
99	status = "okay";
100};
101
102&ehci0 {
103	status = "okay";
104};
105
106&ehci3 {
107	status = "okay";
108};
109
110&gpu {
111	mali-supply = <&reg_dcdcc>;
112	status = "okay";
113};
114
115&hdmi {
116	hvcc-supply = <&reg_bldo2>;
117	status = "okay";
118};
119
120&hdmi_out {
121	hdmi_out_con: endpoint {
122		remote-endpoint = <&hdmi_con_in>;
123	};
124};
125
126&mmc0 {
127	vmmc-supply = <&reg_cldo1>;
128	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
129	bus-width = <4>;
130	disable-wp;
131	status = "okay";
132};
133
134&mmc1 {
135	vmmc-supply = <&reg_cldo3>;
136	vqmmc-supply = <&reg_bldo3>;
137	mmc-pwrseq = <&wifi_pwrseq>;
138	bus-width = <4>;
139	non-removable;
140	keep-power-in-suspend;
141	status = "okay";
142
143	sdio_wifi: wifi@1 {
144		reg = <1>;
145		compatible = "brcm,bcm43430a1-fmac", "brcm,bcm4329-fmac";
146		interrupt-parent = <&r_pio>;
147		interrupts = <1 0 IRQ_TYPE_LEVEL_LOW>; /* PM0 */
148		interrupt-names = "host-wake";
149	};
150};
151
152&mmc2 {
153	vmmc-supply = <&reg_cldo1>;
154	vqmmc-supply = <&reg_bldo2>;
155	cap-mmc-hw-reset;
156	non-removable;
157	mmc-hs200-1_8v;
158	bus-width = <8>;
159	status = "okay";
160};
161
162&ohci0 {
163	status = "okay";
164};
165
166&ohci3 {
167	status = "okay";
168};
169
170&pio {
171	vcc-pc-supply = <&reg_bldo2>;
172	vcc-pd-supply = <&reg_cldo1>;
173	vcc-pg-supply = <&reg_bldo3>;
174};
175
176&r_i2c {
177	status = "okay";
178
179	axp805: pmic@36 {
180		compatible = "x-powers,axp805", "x-powers,axp806";
181		reg = <0x36>;
182		interrupt-parent = <&r_intc>;
183		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
184		interrupt-controller;
185		#interrupt-cells = <1>;
186		x-powers,self-working-mode;
187		vina-supply = <&reg_vcc5v>;
188		vinb-supply = <&reg_vcc5v>;
189		vinc-supply = <&reg_vcc5v>;
190		vind-supply = <&reg_vcc5v>;
191		vine-supply = <&reg_vcc5v>;
192		aldoin-supply = <&reg_vcc5v>;
193		bldoin-supply = <&reg_vcc5v>;
194		cldoin-supply = <&reg_vcc5v>;
195
196		regulators {
197			reg_aldo1: aldo1 {
198				regulator-always-on;
199				regulator-min-microvolt = <3300000>;
200				regulator-max-microvolt = <3300000>;
201				regulator-name = "vcc-pl-led-ir-pg-pm-ts";
202			};
203
204			reg_aldo2: aldo2 {
205				regulator-min-microvolt = <3300000>;
206				regulator-max-microvolt = <3300000>;
207				regulator-name = "vcc-ac200";
208				regulator-enable-ramp-delay = <100000>;
209			};
210
211			aldo3 {
212				/* unused */
213			};
214
215			reg_bldo1: bldo1 {
216				regulator-always-on;
217				regulator-min-microvolt = <1800000>;
218				regulator-max-microvolt = <1800000>;
219				regulator-name = "vcc18-dram-bias-pll";
220			};
221
222			reg_bldo2: bldo2 {
223				regulator-always-on;
224				regulator-min-microvolt = <1800000>;
225				regulator-max-microvolt = <1800000>;
226				regulator-name = "vcc-pc-emmc-efuse-hdmi";
227			};
228
229			reg_bldo3: bldo3 {
230				regulator-always-on;
231				regulator-min-microvolt = <1800000>;
232				regulator-max-microvolt = <1800000>;
233				regulator-name = "vcc-pg-wifiio";
234			};
235
236			bldo4 {
237				/* unused */
238			};
239
240			reg_cldo1: cldo1 {
241				regulator-always-on;
242				regulator-min-microvolt = <3300000>;
243				regulator-max-microvolt = <3300000>;
244				regulator-name = "vcc33-io-pd-emmc-sd-usb-uart";
245			};
246
247			/* This regulator is connected with CLDO3 */
248			reg_cldo2: cldo2 {
249				regulator-always-on;
250				regulator-min-microvolt = <3300000>;
251				regulator-max-microvolt = <3300000>;
252				regulator-name = "vcc-wifi-1";
253			};
254
255			reg_cldo3: cldo3 {
256				regulator-min-microvolt = <3300000>;
257				regulator-max-microvolt = <3300000>;
258				regulator-name = "vcc-wifi-2";
259			};
260
261			reg_dcdca: dcdca {
262				regulator-always-on;
263				regulator-min-microvolt = <810000>;
264				regulator-max-microvolt = <1160000>;
265				regulator-ramp-delay = <2500>;
266				regulator-name = "vdd-cpu";
267			};
268
269			reg_dcdcc: dcdcc {
270				regulator-enable-ramp-delay = <32000>;
271				regulator-min-microvolt = <810000>;
272				regulator-max-microvolt = <1080000>;
273				regulator-ramp-delay = <2500>;
274				regulator-name = "vdd-gpu";
275			};
276
277			reg_dcdcd: dcdcd {
278				regulator-always-on;
279				regulator-min-microvolt = <960000>;
280				regulator-max-microvolt = <960000>;
281				regulator-name = "vdd-sys-hdmi-usb";
282			};
283
284			reg_dcdce: dcdce {
285				regulator-always-on;
286				regulator-min-microvolt = <1200000>;
287				regulator-max-microvolt = <1200000>;
288				regulator-name = "vcc-dram";
289			};
290
291			sw {
292				/* unused */
293			};
294		};
295	};
296};
297
298&r_ir {
299	status = "okay";
300};
301
302&r_pio {
303	/*
304	 * PL0 and PL1 are used for PMIC I2C
305	 * don't enable the pl-supply else
306	 * it will fail at boot
307	 *
308	 * vcc-pl-supply = <&reg_aldo1>;
309	 */
310	vcc-pm-supply = <&reg_aldo1>;
311};
312
313&rtc {
314	clocks = <&ext_osc32k>;
315};
316
317&spdif {
318	pinctrl-names = "default";
319	pinctrl-0 = <&spdif_tx_pin>;
320	status = "okay";
321};
322
323&uart0 {
324	pinctrl-names = "default";
325	pinctrl-0 = <&uart0_ph_pins>;
326	status = "okay";
327};
328
329&uart1 {
330	pinctrl-names = "default";
331	pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>;
332	uart-has-rtscts;
333	status = "okay";
334
335	bluetooth {
336		compatible = "brcm,bcm43430a1-bt";
337		clocks = <&rtc CLK_OSC32K_FANOUT>;
338		clock-names = "lpo";
339		vbat-supply = <&reg_cldo3>;
340		vddio-supply = <&reg_bldo3>;
341		device-wakeup-gpios = <&r_pio 1 2 GPIO_ACTIVE_HIGH>; /* PM2 */
342		host-wakeup-gpios = <&r_pio 1 1 GPIO_ACTIVE_HIGH>; /* PM1 */
343		shutdown-gpios = <&r_pio 1 4 GPIO_ACTIVE_HIGH>; /* PM4 */
344		max-speed = <1500000>;
345	};
346};
347
348&usb2otg {
349	dr_mode = "host";
350	status = "okay";
351};
352
353&usb2phy {
354	usb0_vbus-supply = <&reg_vcc5v>;
355	usb3_vbus-supply = <&reg_vcc5v>;
356	status = "okay";
357};
358
359&usb3phy {
360	status = "okay";
361};
362