xref: /linux/scripts/dtc/include-prefixes/arm/samsung/exynos3250-artik5-eval.dts (revision cdd5b5a9761fd66d17586e4f4ba6588c70e640ea)
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's Exynos3250 based ARTIK5 evaluation board device tree source
4 *
5 * Copyright (c) 2016 Samsung Electronics Co., Ltd.
6 *		http://www.samsung.com
7 *
8 * Device tree source file for Samsung's ARTIK5 evaluation board
9 * which is based on Samsung Exynos3250 SoC.
10 */
11
12/dts-v1/;
13#include "exynos3250-artik5.dtsi"
14
15/ {
16	model = "Samsung ARTIK5 evaluation board";
17	compatible = "samsung,artik5-eval", "samsung,artik5",
18			"samsung,exynos3250", "samsung,exynos3";
19
20	aliases {
21		mmc0 = &mshc_2;
22	};
23};
24
25&mshc_2 {
26	cap-sd-highspeed;
27	disable-wp;
28	vqmmc-supply = <&ldo3_reg>;
29	card-detect-delay = <200>;
30	clock-frequency = <100000000>;
31	max-frequency = <100000000>;
32	samsung,dw-mshc-ciu-div = <1>;
33	samsung,dw-mshc-sdr-timing = <0 1>;
34	samsung,dw-mshc-ddr-timing = <1 2>;
35	pinctrl-names = "default";
36	pinctrl-0 = <&sd2_cmd &sd2_clk &sd2_cd &sd2_bus1 &sd2_bus4>;
37	bus-width = <4>;
38	status = "okay";
39};
40
41&serial_2 {
42	status = "okay";
43};
44
45&spi_0 {
46	status = "okay";
47	cs-gpios = <&gpx3 4 GPIO_ACTIVE_LOW>, <0>;
48
49	assigned-clocks = <&cmu CLK_MOUT_SPI0>, <&cmu CLK_DIV_SPI0>,
50			  <&cmu CLK_DIV_SPI0_PRE>, <&cmu CLK_SCLK_SPI0>;
51	assigned-clock-parents = <&cmu CLK_DIV_MPLL_PRE>, /* for: CLK_MOUT_SPI0 */
52				 <&cmu CLK_MOUT_SPI0>,    /* for: CLK_DIV_SPI0 */
53				 <&cmu CLK_DIV_SPI0>,     /* for: CLK_DIV_SPI0_PRE */
54				 <&cmu CLK_DIV_SPI0_PRE>; /* for: CLK_SCLK_SPI0 */
55
56	ethernet@0 {
57		compatible = "asix,ax88796c";
58		reg = <0x0>;
59		local-mac-address = [00 00 00 00 00 00]; /* Filled in by a boot-loader */
60		interrupt-parent = <&gpx2>;
61		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
62		spi-max-frequency = <40000000>;
63		reset-gpios = <&gpe0 2 GPIO_ACTIVE_LOW>;
64
65		controller-data {
66			samsung,spi-feedback-delay = <2>;
67		};
68	};
69};
70