1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2 3#include <dt-bindings/gpio/gpio.h> 4#include <dt-bindings/interrupt-controller/irq.h> 5#include <dt-bindings/interrupt-controller/arm-gic.h> 6#include <dt-bindings/pinctrl/rockchip.h> 7#include <dt-bindings/clock/rk3036-cru.h> 8#include <dt-bindings/soc/rockchip,boot-mode.h> 9#include <dt-bindings/power/rk3036-power.h> 10 11/ { 12 #address-cells = <1>; 13 #size-cells = <1>; 14 15 compatible = "rockchip,rk3036"; 16 17 interrupt-parent = <&gic>; 18 19 aliases { 20 gpio0 = &gpio0; 21 gpio1 = &gpio1; 22 gpio2 = &gpio2; 23 i2c0 = &i2c0; 24 i2c1 = &i2c1; 25 i2c2 = &i2c2; 26 mshc0 = &emmc; 27 mshc1 = &sdmmc; 28 mshc2 = &sdio; 29 serial0 = &uart0; 30 serial1 = &uart1; 31 serial2 = &uart2; 32 spi = &spi; 33 }; 34 35 cpus { 36 #address-cells = <1>; 37 #size-cells = <0>; 38 enable-method = "rockchip,rk3036-smp"; 39 40 cpu0: cpu@f00 { 41 device_type = "cpu"; 42 compatible = "arm,cortex-a7"; 43 reg = <0xf00>; 44 resets = <&cru SRST_CORE0>; 45 operating-points = < 46 /* KHz uV */ 47 816000 1000000 48 >; 49 clock-latency = <40000>; 50 clocks = <&cru ARMCLK>; 51 }; 52 53 cpu1: cpu@f01 { 54 device_type = "cpu"; 55 compatible = "arm,cortex-a7"; 56 reg = <0xf01>; 57 resets = <&cru SRST_CORE1>; 58 }; 59 }; 60 61 arm-pmu { 62 compatible = "arm,cortex-a7-pmu"; 63 interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>, 64 <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; 65 interrupt-affinity = <&cpu0>, <&cpu1>; 66 }; 67 68 display-subsystem { 69 compatible = "rockchip,display-subsystem"; 70 ports = <&vop_out>; 71 }; 72 73 timer { 74 compatible = "arm,armv7-timer"; 75 arm,cpu-registers-not-fw-configured; 76 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, 77 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, 78 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>, 79 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; 80 clock-frequency = <24000000>; 81 }; 82 83 xin24m: oscillator { 84 compatible = "fixed-clock"; 85 clock-frequency = <24000000>; 86 clock-output-names = "xin24m"; 87 #clock-cells = <0>; 88 }; 89 90 bus_intmem: sram@10080000 { 91 compatible = "mmio-sram"; 92 reg = <0x10080000 0x2000>; 93 #address-cells = <1>; 94 #size-cells = <1>; 95 ranges = <0 0x10080000 0x2000>; 96 97 smp-sram@0 { 98 compatible = "rockchip,rk3066-smp-sram"; 99 reg = <0x00 0x10>; 100 }; 101 }; 102 103 gpu: gpu@10090000 { 104 compatible = "rockchip,rk3036-mali", "arm,mali-400"; 105 reg = <0x10090000 0x10000>; 106 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>, 107 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, 108 <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, 109 <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>; 110 interrupt-names = "gp", 111 "gpmmu", 112 "pp0", 113 "ppmmu0"; 114 assigned-clocks = <&cru SCLK_GPU>; 115 assigned-clock-rates = <100000000>; 116 clocks = <&cru SCLK_GPU>, <&cru SCLK_GPU>; 117 clock-names = "bus", "core"; 118 power-domains = <&power RK3036_PD_GPU>; 119 resets = <&cru SRST_GPU>; 120 status = "disabled"; 121 }; 122 123 vpu: video-codec@10108000 { 124 compatible = "rockchip,rk3036-vpu"; 125 reg = <0x10108000 0x800>; 126 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; 127 interrupt-names = "vdpu"; 128 clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; 129 clock-names = "aclk", "hclk"; 130 iommus = <&vpu_mmu>; 131 power-domains = <&power RK3036_PD_VPU>; 132 }; 133 134 vpu_mmu: iommu@10108800 { 135 compatible = "rockchip,iommu"; 136 reg = <0x10108800 0x100>; 137 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; 138 clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; 139 clock-names = "aclk", "iface"; 140 power-domains = <&power RK3036_PD_VPU>; 141 #iommu-cells = <0>; 142 }; 143 144 vop: vop@10118000 { 145 compatible = "rockchip,rk3036-vop"; 146 reg = <0x10118000 0x19c>; 147 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; 148 clocks = <&cru ACLK_LCDC>, <&cru SCLK_LCDC>, <&cru HCLK_LCDC>; 149 clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; 150 resets = <&cru SRST_LCDC1_A>, <&cru SRST_LCDC1_H>, <&cru SRST_LCDC1_D>; 151 reset-names = "axi", "ahb", "dclk"; 152 iommus = <&vop_mmu>; 153 power-domains = <&power RK3036_PD_VIO>; 154 status = "disabled"; 155 156 vop_out: port { 157 #address-cells = <1>; 158 #size-cells = <0>; 159 vop_out_hdmi: endpoint@0 { 160 reg = <0>; 161 remote-endpoint = <&hdmi_in_vop>; 162 }; 163 }; 164 }; 165 166 vop_mmu: iommu@10118300 { 167 compatible = "rockchip,iommu"; 168 reg = <0x10118300 0x100>; 169 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; 170 clocks = <&cru ACLK_LCDC>, <&cru HCLK_LCDC>; 171 clock-names = "aclk", "iface"; 172 power-domains = <&power RK3036_PD_VIO>; 173 #iommu-cells = <0>; 174 status = "disabled"; 175 }; 176 177 qos_gpu: qos@1012d000 { 178 compatible = "rockchip,rk3036-qos", "syscon"; 179 reg = <0x1012d000 0x20>; 180 }; 181 182 qos_vpu: qos@1012e000 { 183 compatible = "rockchip,rk3036-qos", "syscon"; 184 reg = <0x1012e000 0x20>; 185 }; 186 187 qos_vio: qos@1012f000 { 188 compatible = "rockchip,rk3036-qos", "syscon"; 189 reg = <0x1012f000 0x20>; 190 }; 191 192 gic: interrupt-controller@10139000 { 193 compatible = "arm,gic-400"; 194 interrupt-controller; 195 #interrupt-cells = <3>; 196 #address-cells = <0>; 197 198 reg = <0x10139000 0x1000>, 199 <0x1013a000 0x2000>, 200 <0x1013c000 0x2000>, 201 <0x1013e000 0x2000>; 202 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; 203 }; 204 205 usb_otg: usb@10180000 { 206 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", 207 "snps,dwc2"; 208 reg = <0x10180000 0x40000>; 209 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; 210 clocks = <&cru HCLK_OTG0>; 211 clock-names = "otg"; 212 dr_mode = "otg"; 213 g-np-tx-fifo-size = <16>; 214 g-rx-fifo-size = <275>; 215 g-tx-fifo-size = <256 128 128 64 64 32>; 216 status = "disabled"; 217 }; 218 219 usb_host: usb@101c0000 { 220 compatible = "rockchip,rk3036-usb", "rockchip,rk3066-usb", 221 "snps,dwc2"; 222 reg = <0x101c0000 0x40000>; 223 interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; 224 clocks = <&cru HCLK_OTG1>; 225 clock-names = "otg"; 226 dr_mode = "host"; 227 status = "disabled"; 228 }; 229 230 emac: ethernet@10200000 { 231 compatible = "rockchip,rk3036-emac"; 232 reg = <0x10200000 0x4000>; 233 interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; 234 rockchip,grf = <&grf>; 235 clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>; 236 clock-names = "hclk", "macref", "macclk"; 237 /* 238 * Fix the emac parent clock is DPLL instead of APLL. 239 * since that will cause some unstable things if the cpufreq 240 * is working. (e.g: the accurate 50MHz what mac_ref need) 241 */ 242 assigned-clocks = <&cru SCLK_MACPLL>; 243 assigned-clock-parents = <&cru PLL_DPLL>; 244 max-speed = <100>; 245 phy-mode = "rmii"; 246 status = "disabled"; 247 }; 248 249 sdmmc: mmc@10214000 { 250 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; 251 reg = <0x10214000 0x4000>; 252 clock-frequency = <37500000>; 253 max-frequency = <37500000>; 254 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; 255 clock-names = "biu", "ciu"; 256 fifo-depth = <0x100>; 257 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; 258 resets = <&cru SRST_MMC0>; 259 reset-names = "reset"; 260 status = "disabled"; 261 }; 262 263 sdio: mmc@10218000 { 264 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; 265 reg = <0x10218000 0x4000>; 266 max-frequency = <37500000>; 267 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, 268 <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; 269 clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; 270 fifo-depth = <0x100>; 271 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; 272 resets = <&cru SRST_SDIO>; 273 reset-names = "reset"; 274 status = "disabled"; 275 }; 276 277 emmc: mmc@1021c000 { 278 compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc"; 279 reg = <0x1021c000 0x4000>; 280 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; 281 bus-width = <8>; 282 cap-mmc-highspeed; 283 clock-frequency = <37500000>; 284 max-frequency = <37500000>; 285 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, 286 <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; 287 clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; 288 disable-wp; 289 dmas = <&pdma 12>; 290 dma-names = "rx-tx"; 291 fifo-depth = <0x100>; 292 mmc-ddr-1_8v; 293 non-removable; 294 pinctrl-names = "default"; 295 pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>; 296 resets = <&cru SRST_EMMC>; 297 reset-names = "reset"; 298 status = "disabled"; 299 }; 300 301 i2s: i2s@10220000 { 302 compatible = "rockchip,rk3036-i2s", "rockchip,rk3066-i2s"; 303 reg = <0x10220000 0x4000>; 304 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; 305 clock-names = "i2s_clk", "i2s_hclk"; 306 clocks = <&cru SCLK_I2S>, <&cru HCLK_I2S>; 307 dmas = <&pdma 0>, <&pdma 1>; 308 dma-names = "tx", "rx"; 309 pinctrl-names = "default"; 310 pinctrl-0 = <&i2s_bus>; 311 #sound-dai-cells = <0>; 312 status = "disabled"; 313 }; 314 315 nfc: nand-controller@10500000 { 316 compatible = "rockchip,rk3036-nfc", 317 "rockchip,rk2928-nfc"; 318 reg = <0x10500000 0x4000>; 319 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; 320 clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; 321 clock-names = "ahb", "nfc"; 322 assigned-clocks = <&cru SCLK_NANDC>; 323 assigned-clock-rates = <150000000>; 324 pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_csn0 325 &flash_rdn &flash_rdy &flash_wrn>; 326 pinctrl-names = "default"; 327 status = "disabled"; 328 }; 329 330 cru: clock-controller@20000000 { 331 compatible = "rockchip,rk3036-cru"; 332 reg = <0x20000000 0x1000>; 333 clocks = <&xin24m>; 334 clock-names = "xin24m"; 335 rockchip,grf = <&grf>; 336 #clock-cells = <1>; 337 #reset-cells = <1>; 338 assigned-clocks = <&cru PLL_GPLL>; 339 assigned-clock-rates = <594000000>; 340 }; 341 342 grf: syscon@20008000 { 343 compatible = "rockchip,rk3036-grf", "syscon", "simple-mfd"; 344 reg = <0x20008000 0x1000>; 345 346 power: power-controller { 347 compatible = "rockchip,rk3036-power-controller"; 348 #power-domain-cells = <1>; 349 #address-cells = <1>; 350 #size-cells = <0>; 351 352 power-domain@RK3036_PD_VIO { 353 reg = <RK3036_PD_VIO>; 354 clocks = <&cru ACLK_LCDC>, 355 <&cru HCLK_LCDC>, 356 <&cru SCLK_LCDC>; 357 pm_qos = <&qos_vio>; 358 #power-domain-cells = <0>; 359 }; 360 361 power-domain@RK3036_PD_VPU { 362 reg = <RK3036_PD_VPU>; 363 clocks = <&cru ACLK_VCODEC>, 364 <&cru HCLK_VCODEC>; 365 pm_qos = <&qos_vpu>; 366 #power-domain-cells = <0>; 367 }; 368 369 power-domain@RK3036_PD_GPU { 370 reg = <RK3036_PD_GPU>; 371 clocks = <&cru SCLK_GPU>; 372 pm_qos = <&qos_gpu>; 373 #power-domain-cells = <0>; 374 }; 375 }; 376 377 reboot-mode { 378 compatible = "syscon-reboot-mode"; 379 offset = <0x1d8>; 380 mode-normal = <BOOT_NORMAL>; 381 mode-recovery = <BOOT_RECOVERY>; 382 mode-bootloader = <BOOT_FASTBOOT>; 383 mode-loader = <BOOT_BL_DOWNLOAD>; 384 }; 385 }; 386 387 acodec: audio-codec@20030000 { 388 compatible = "rockchip,rk3036-codec"; 389 reg = <0x20030000 0x4000>; 390 clock-names = "acodec_pclk"; 391 clocks = <&cru PCLK_ACODEC>; 392 rockchip,grf = <&grf>; 393 #sound-dai-cells = <0>; 394 status = "disabled"; 395 }; 396 397 hdmi: hdmi@20034000 { 398 compatible = "rockchip,rk3036-inno-hdmi"; 399 reg = <0x20034000 0x4000>; 400 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; 401 clocks = <&cru PCLK_HDMI>; 402 clock-names = "pclk"; 403 pinctrl-names = "default"; 404 pinctrl-0 = <&hdmi_ctl>; 405 #sound-dai-cells = <0>; 406 status = "disabled"; 407 408 ports { 409 #address-cells = <1>; 410 #size-cells = <0>; 411 412 hdmi_in: port@0 { 413 reg = <0>; 414 415 hdmi_in_vop: endpoint { 416 remote-endpoint = <&vop_out_hdmi>; 417 }; 418 }; 419 420 hdmi_out: port@1 { 421 reg = <1>; 422 }; 423 }; 424 }; 425 426 timer: timer@20044000 { 427 compatible = "rockchip,rk3036-timer", "rockchip,rk3288-timer"; 428 reg = <0x20044000 0x20>; 429 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; 430 clocks = <&cru PCLK_TIMER>, <&xin24m>; 431 clock-names = "pclk", "timer"; 432 }; 433 434 pwm0: pwm@20050000 { 435 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; 436 reg = <0x20050000 0x10>; 437 #pwm-cells = <3>; 438 clocks = <&cru PCLK_PWM>; 439 pinctrl-names = "default"; 440 pinctrl-0 = <&pwm0_pin>; 441 status = "disabled"; 442 }; 443 444 pwm1: pwm@20050010 { 445 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; 446 reg = <0x20050010 0x10>; 447 #pwm-cells = <3>; 448 clocks = <&cru PCLK_PWM>; 449 pinctrl-names = "default"; 450 pinctrl-0 = <&pwm1_pin>; 451 status = "disabled"; 452 }; 453 454 pwm2: pwm@20050020 { 455 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; 456 reg = <0x20050020 0x10>; 457 #pwm-cells = <3>; 458 clocks = <&cru PCLK_PWM>; 459 pinctrl-names = "default"; 460 pinctrl-0 = <&pwm2_pin>; 461 status = "disabled"; 462 }; 463 464 pwm3: pwm@20050030 { 465 compatible = "rockchip,rk3036-pwm", "rockchip,rk2928-pwm"; 466 reg = <0x20050030 0x10>; 467 #pwm-cells = <2>; 468 clocks = <&cru PCLK_PWM>; 469 pinctrl-names = "default"; 470 pinctrl-0 = <&pwm3_pin>; 471 status = "disabled"; 472 }; 473 474 i2c1: i2c@20056000 { 475 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; 476 reg = <0x20056000 0x1000>; 477 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; 478 #address-cells = <1>; 479 #size-cells = <0>; 480 clock-names = "i2c"; 481 clocks = <&cru PCLK_I2C1>; 482 pinctrl-names = "default"; 483 pinctrl-0 = <&i2c1_xfer>; 484 status = "disabled"; 485 }; 486 487 i2c2: i2c@2005a000 { 488 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; 489 reg = <0x2005a000 0x1000>; 490 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; 491 #address-cells = <1>; 492 #size-cells = <0>; 493 clock-names = "i2c"; 494 clocks = <&cru PCLK_I2C2>; 495 pinctrl-names = "default"; 496 pinctrl-0 = <&i2c2_xfer>; 497 status = "disabled"; 498 }; 499 500 uart0: serial@20060000 { 501 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; 502 reg = <0x20060000 0x100>; 503 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; 504 reg-shift = <2>; 505 reg-io-width = <4>; 506 clock-frequency = <24000000>; 507 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; 508 clock-names = "baudclk", "apb_pclk"; 509 pinctrl-names = "default"; 510 pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; 511 status = "disabled"; 512 }; 513 514 uart1: serial@20064000 { 515 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; 516 reg = <0x20064000 0x100>; 517 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; 518 reg-shift = <2>; 519 reg-io-width = <4>; 520 clock-frequency = <24000000>; 521 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; 522 clock-names = "baudclk", "apb_pclk"; 523 pinctrl-names = "default"; 524 pinctrl-0 = <&uart1_xfer>; 525 status = "disabled"; 526 }; 527 528 uart2: serial@20068000 { 529 compatible = "rockchip,rk3036-uart", "snps,dw-apb-uart"; 530 reg = <0x20068000 0x100>; 531 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; 532 reg-shift = <2>; 533 reg-io-width = <4>; 534 clock-frequency = <24000000>; 535 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; 536 clock-names = "baudclk", "apb_pclk"; 537 pinctrl-names = "default"; 538 pinctrl-0 = <&uart2_xfer>; 539 status = "disabled"; 540 }; 541 542 i2c0: i2c@20072000 { 543 compatible = "rockchip,rk3036-i2c", "rockchip,rk3288-i2c"; 544 reg = <0x20072000 0x1000>; 545 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; 546 #address-cells = <1>; 547 #size-cells = <0>; 548 clock-names = "i2c"; 549 clocks = <&cru PCLK_I2C0>; 550 pinctrl-names = "default"; 551 pinctrl-0 = <&i2c0_xfer>; 552 status = "disabled"; 553 }; 554 555 spi: spi@20074000 { 556 compatible = "rockchip,rk3036-spi"; 557 reg = <0x20074000 0x1000>; 558 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; 559 clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; 560 clock-names = "spiclk", "apb_pclk"; 561 dmas = <&pdma 8>, <&pdma 9>; 562 dma-names = "tx", "rx"; 563 pinctrl-names = "default"; 564 pinctrl-0 = <&spi_txd &spi_rxd &spi_clk &spi_cs0>; 565 #address-cells = <1>; 566 #size-cells = <0>; 567 status = "disabled"; 568 }; 569 570 pdma: dma-controller@20078000 { 571 compatible = "arm,pl330", "arm,primecell"; 572 reg = <0x20078000 0x4000>; 573 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, 574 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; 575 #dma-cells = <1>; 576 arm,pl330-broken-no-flushp; 577 arm,pl330-periph-burst; 578 clocks = <&cru ACLK_DMAC2>; 579 clock-names = "apb_pclk"; 580 }; 581 582 pinctrl: pinctrl { 583 compatible = "rockchip,rk3036-pinctrl"; 584 rockchip,grf = <&grf>; 585 #address-cells = <1>; 586 #size-cells = <1>; 587 ranges; 588 589 gpio0: gpio@2007c000 { 590 compatible = "rockchip,gpio-bank"; 591 reg = <0x2007c000 0x100>; 592 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; 593 clocks = <&cru PCLK_GPIO0>; 594 595 gpio-controller; 596 #gpio-cells = <2>; 597 598 interrupt-controller; 599 #interrupt-cells = <2>; 600 }; 601 602 gpio1: gpio@20080000 { 603 compatible = "rockchip,gpio-bank"; 604 reg = <0x20080000 0x100>; 605 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; 606 clocks = <&cru PCLK_GPIO1>; 607 608 gpio-controller; 609 #gpio-cells = <2>; 610 611 interrupt-controller; 612 #interrupt-cells = <2>; 613 }; 614 615 gpio2: gpio@20084000 { 616 compatible = "rockchip,gpio-bank"; 617 reg = <0x20084000 0x100>; 618 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; 619 clocks = <&cru PCLK_GPIO2>; 620 621 gpio-controller; 622 #gpio-cells = <2>; 623 624 interrupt-controller; 625 #interrupt-cells = <2>; 626 }; 627 628 pcfg_pull_default: pcfg-pull-default { 629 bias-pull-pin-default; 630 }; 631 632 pcfg_pull_none: pcfg-pull-none { 633 bias-disable; 634 }; 635 636 pwm0 { 637 pwm0_pin: pwm0-pin { 638 rockchip,pins = <0 RK_PA0 2 &pcfg_pull_none>; 639 }; 640 }; 641 642 pwm1 { 643 pwm1_pin: pwm1-pin { 644 rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; 645 }; 646 }; 647 648 pwm2 { 649 pwm2_pin: pwm2-pin { 650 rockchip,pins = <0 RK_PA1 2 &pcfg_pull_none>; 651 }; 652 }; 653 654 pwm3 { 655 pwm3_pin: pwm3-pin { 656 rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; 657 }; 658 }; 659 660 sdmmc { 661 sdmmc_clk: sdmmc-clk { 662 rockchip,pins = <1 RK_PC0 1 &pcfg_pull_none>; 663 }; 664 665 sdmmc_cmd: sdmmc-cmd { 666 rockchip,pins = <1 RK_PB7 1 &pcfg_pull_default>; 667 }; 668 669 sdmmc_cd: sdmmc-cd { 670 rockchip,pins = <1 RK_PC1 1 &pcfg_pull_default>; 671 }; 672 673 sdmmc_bus1: sdmmc-bus1 { 674 rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>; 675 }; 676 677 sdmmc_bus4: sdmmc-bus4 { 678 rockchip,pins = <1 RK_PC2 1 &pcfg_pull_default>, 679 <1 RK_PC3 1 &pcfg_pull_default>, 680 <1 RK_PC4 1 &pcfg_pull_default>, 681 <1 RK_PC5 1 &pcfg_pull_default>; 682 }; 683 }; 684 685 sdio { 686 sdio_bus1: sdio-bus1 { 687 rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>; 688 }; 689 690 sdio_bus4: sdio-bus4 { 691 rockchip,pins = <0 RK_PB3 1 &pcfg_pull_default>, 692 <0 RK_PB4 1 &pcfg_pull_default>, 693 <0 RK_PB5 1 &pcfg_pull_default>, 694 <0 RK_PB6 1 &pcfg_pull_default>; 695 }; 696 697 sdio_cmd: sdio-cmd { 698 rockchip,pins = <0 RK_PB0 1 &pcfg_pull_default>; 699 }; 700 701 sdio_clk: sdio-clk { 702 rockchip,pins = <0 RK_PB1 1 &pcfg_pull_none>; 703 }; 704 }; 705 706 emmc { 707 /* 708 * We run eMMC at max speed; bump up drive strength. 709 * We also have external pulls, so disable the internal ones. 710 */ 711 emmc_clk: emmc-clk { 712 rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>; 713 }; 714 715 emmc_cmd: emmc-cmd { 716 rockchip,pins = <2 RK_PA1 2 &pcfg_pull_default>; 717 }; 718 719 emmc_bus8: emmc-bus8 { 720 rockchip,pins = <1 RK_PD0 2 &pcfg_pull_default>, 721 <1 RK_PD1 2 &pcfg_pull_default>, 722 <1 RK_PD2 2 &pcfg_pull_default>, 723 <1 RK_PD3 2 &pcfg_pull_default>, 724 <1 RK_PD4 2 &pcfg_pull_default>, 725 <1 RK_PD5 2 &pcfg_pull_default>, 726 <1 RK_PD6 2 &pcfg_pull_default>, 727 <1 RK_PD7 2 &pcfg_pull_default>; 728 }; 729 }; 730 731 nfc { 732 flash_ale: flash-ale { 733 rockchip,pins = <2 RK_PA0 1 &pcfg_pull_default>; 734 }; 735 736 flash_bus8: flash-bus8 { 737 rockchip,pins = <1 RK_PD0 1 &pcfg_pull_default>, 738 <1 RK_PD1 1 &pcfg_pull_default>, 739 <1 RK_PD2 1 &pcfg_pull_default>, 740 <1 RK_PD3 1 &pcfg_pull_default>, 741 <1 RK_PD4 1 &pcfg_pull_default>, 742 <1 RK_PD5 1 &pcfg_pull_default>, 743 <1 RK_PD6 1 &pcfg_pull_default>, 744 <1 RK_PD7 1 &pcfg_pull_default>; 745 }; 746 747 flash_cle: flash-cle { 748 rockchip,pins = <2 RK_PA1 1 &pcfg_pull_default>; 749 }; 750 751 flash_csn0: flash-csn0 { 752 rockchip,pins = <2 RK_PA6 1 &pcfg_pull_default>; 753 }; 754 755 flash_rdn: flash-rdn { 756 rockchip,pins = <2 RK_PA3 1 &pcfg_pull_default>; 757 }; 758 759 flash_rdy: flash-rdy { 760 rockchip,pins = <2 RK_PA4 1 &pcfg_pull_default>; 761 }; 762 763 flash_wrn: flash-wrn { 764 rockchip,pins = <2 RK_PA2 1 &pcfg_pull_default>; 765 }; 766 }; 767 768 emac { 769 emac_xfer: emac-xfer { 770 rockchip,pins = <2 RK_PB2 1 &pcfg_pull_default>, /* crs_dvalid */ 771 <2 RK_PB5 1 &pcfg_pull_default>, /* tx_en */ 772 <2 RK_PB6 1 &pcfg_pull_default>, /* mac_clk */ 773 <2 RK_PB7 1 &pcfg_pull_default>, /* rx_err */ 774 <2 RK_PC0 1 &pcfg_pull_default>, /* rxd1 */ 775 <2 RK_PC1 1 &pcfg_pull_default>, /* rxd0 */ 776 <2 RK_PC2 1 &pcfg_pull_default>, /* txd1 */ 777 <2 RK_PC3 1 &pcfg_pull_default>; /* txd0 */ 778 }; 779 780 emac_mdio: emac-mdio { 781 rockchip,pins = <2 RK_PB4 1 &pcfg_pull_default>, /* mac_md */ 782 <2 RK_PD1 1 &pcfg_pull_default>; /* mac_mdclk */ 783 }; 784 }; 785 786 i2c0 { 787 i2c0_xfer: i2c0-xfer { 788 rockchip,pins = <0 RK_PA0 1 &pcfg_pull_none>, 789 <0 RK_PA1 1 &pcfg_pull_none>; 790 }; 791 }; 792 793 i2c1 { 794 i2c1_xfer: i2c1-xfer { 795 rockchip,pins = <0 RK_PA2 1 &pcfg_pull_none>, 796 <0 RK_PA3 1 &pcfg_pull_none>; 797 }; 798 }; 799 800 i2c2 { 801 i2c2_xfer: i2c2-xfer { 802 rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>, 803 <2 RK_PC5 1 &pcfg_pull_none>; 804 }; 805 }; 806 807 i2s { 808 i2s_bus: i2s-bus { 809 rockchip,pins = <1 RK_PA0 1 &pcfg_pull_default>, 810 <1 RK_PA1 1 &pcfg_pull_default>, 811 <1 RK_PA2 1 &pcfg_pull_default>, 812 <1 RK_PA3 1 &pcfg_pull_default>, 813 <1 RK_PA4 1 &pcfg_pull_default>, 814 <1 RK_PA5 1 &pcfg_pull_default>; 815 }; 816 }; 817 818 hdmi { 819 hdmi_ctl: hdmi-ctl { 820 rockchip,pins = <1 RK_PB0 1 &pcfg_pull_none>, 821 <1 RK_PB1 1 &pcfg_pull_none>, 822 <1 RK_PB2 1 &pcfg_pull_none>, 823 <1 RK_PB3 1 &pcfg_pull_none>; 824 }; 825 }; 826 827 uart0 { 828 uart0_xfer: uart0-xfer { 829 rockchip,pins = <0 RK_PC0 1 &pcfg_pull_default>, 830 <0 RK_PC1 1 &pcfg_pull_none>; 831 }; 832 833 uart0_cts: uart0-cts { 834 rockchip,pins = <0 RK_PC2 1 &pcfg_pull_default>; 835 }; 836 837 uart0_rts: uart0-rts { 838 rockchip,pins = <0 RK_PC3 1 &pcfg_pull_none>; 839 }; 840 }; 841 842 uart1 { 843 uart1_xfer: uart1-xfer { 844 rockchip,pins = <2 RK_PC6 1 &pcfg_pull_default>, 845 <2 RK_PC7 1 &pcfg_pull_none>; 846 }; 847 /* no rts / cts for uart1 */ 848 }; 849 850 uart2 { 851 uart2_xfer: uart2-xfer { 852 rockchip,pins = <1 RK_PC2 2 &pcfg_pull_default>, 853 <1 RK_PC3 2 &pcfg_pull_none>; 854 }; 855 /* no rts / cts for uart2 */ 856 }; 857 858 spi-pins { 859 spi_txd:spi-txd { 860 rockchip,pins = <1 RK_PD5 3 &pcfg_pull_default>; 861 }; 862 863 spi_rxd:spi-rxd { 864 rockchip,pins = <1 RK_PD4 3 &pcfg_pull_default>; 865 }; 866 867 spi_clk:spi-clk { 868 rockchip,pins = <2 RK_PA0 2 &pcfg_pull_default>; 869 }; 870 871 spi_cs0:spi-cs0 { 872 rockchip,pins = <1 RK_PD6 3 &pcfg_pull_default>; 873 874 }; 875 876 spi_cs1:spi-cs1 { 877 rockchip,pins = <1 RK_PD7 3 &pcfg_pull_default>; 878 879 }; 880 }; 881 }; 882}; 883