1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT 2/* 3 * Copyright 2017 Luxul Inc. 4 */ 5 6/dts-v1/; 7 8#include "bcm53573.dtsi" 9 10/ { 11 compatible = "luxul,xap-810-v1", "brcm,bcm47189", "brcm,bcm53573"; 12 model = "Luxul XAP-810 V1"; 13 14 chosen { 15 bootargs = "earlycon"; 16 }; 17 18 memory@0 { 19 device_type = "memory"; 20 reg = <0x00000000 0x08000000>; 21 }; 22 23 leds-0 { 24 compatible = "gpio-leds"; 25 26 led-5ghz { 27 label = "bcm53xx:blue:5ghz"; 28 gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>; 29 }; 30 31 led-system { 32 label = "bcm53xx:green:system"; 33 gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>; 34 linux,default-trigger = "timer"; 35 }; 36 }; 37 38 leds-1 { 39 compatible = "gpio-leds"; 40 41 led-2ghz { 42 label = "bcm53xx:blue:2ghz"; 43 gpios = <&pcie0_chipcommon 3 GPIO_ACTIVE_HIGH>; 44 }; 45 }; 46 47 gpio-keys { 48 compatible = "gpio-keys"; 49 50 button-restart { 51 label = "Reset"; 52 linux,code = <KEY_RESTART>; 53 gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>; 54 }; 55 }; 56}; 57 58&pcie0 { 59 ranges = <0x00000000 0 0 0 0 0x00100000>; 60 #address-cells = <3>; 61 #size-cells = <2>; 62 63 bridge@0,0,0 { 64 reg = <0x0000 0 0 0 0>; 65 ranges = <0x00000000 0 0 0 0 0 0 0x00100000>; 66 #address-cells = <3>; 67 #size-cells = <2>; 68 69 wifi@0,1,0 { 70 reg = <0x0000 0 0 0 0>; 71 ranges = <0x00000000 0 0 0 0x00100000>; 72 #address-cells = <1>; 73 #size-cells = <1>; 74 75 pcie0_chipcommon: chipcommon@0 { 76 reg = <0 0x1000>; 77 78 gpio-controller; 79 #gpio-cells = <2>; 80 }; 81 }; 82 }; 83}; 84 85&gmac0 { 86 phy-mode = "rgmii"; 87 phy-handle = <&bcm54210e>; 88 89 /delete-node/ fixed-link; 90 91 mdio { 92 /delete-node/ switch@1e; 93 94 bcm54210e: ethernet-phy@0 { 95 reg = <0>; 96 }; 97 }; 98}; 99 100&gmac1 { 101 status = "disabled"; 102}; 103