1// SPDX-License-Identifier: GPL-2.0 2// Copyright (c) 2018 Inspur Corporation 3/dts-v1/; 4 5#include "aspeed-g5.dtsi" 6#include <dt-bindings/gpio/aspeed-gpio.h> 7 8/ { 9 model = "ON5263M5 BMC"; 10 compatible = "inspur,on5263m5-bmc", "aspeed,ast2500"; 11 12 chosen { 13 stdout-path = &uart5; 14 bootargs = "earlycon"; 15 }; 16 17 memory { 18 reg = <0x80000000 0x20000000>; 19 }; 20 21 reserved-memory { 22 #address-cells = <1>; 23 #size-cells = <1>; 24 ranges; 25 26 vga_memory: framebuffer@9f000000 { 27 no-map; 28 reg = <0x9f000000 0x01000000>; 29 }; 30 }; 31 32 leds { 33 compatible = "gpio-leds"; 34 bmc_alive { 35 label = "bmc_alive"; 36 gpios = <&gpio ASPEED_GPIO(I, 1) GPIO_ACTIVE_LOW>; 37 linux,default-trigger = "timer"; 38 }; 39 }; 40 41 iio-hwmon { 42 compatible = "iio-hwmon"; 43 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, 44 <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>; 45 }; 46 47}; 48 49&fmc { 50 status = "okay"; 51 flash@0 { 52 status = "okay"; 53 m25p,fast-read; 54 label = "bmc"; 55#include "openbmc-flash-layout.dtsi" 56 }; 57}; 58 59&spi1 { 60 status = "okay"; 61 pinctrl-names = "default"; 62 pinctrl-0 = <&pinctrl_spi1_default>; 63 64 flash@0 { 65 status = "okay"; 66 m25p,fast-read; 67 label = "pnor"; 68 }; 69}; 70 71&uart5 { 72 status = "okay"; 73}; 74 75&mac0 { 76 status = "okay"; 77 78 pinctrl-names = "default"; 79 pinctrl-0 = <&pinctrl_rmii1_default>; 80 clocks = <&syscon ASPEED_CLK_GATE_MAC1CLK>, 81 <&syscon ASPEED_CLK_MAC1RCLK>; 82 clock-names = "MACCLK", "RCLK"; 83 use-ncsi; 84}; 85 86&mac1 { 87 status = "okay"; 88 89 pinctrl-names = "default"; 90 pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; 91}; 92 93&i2c6 { 94 status = "okay"; 95 96 tmp421@4e { 97 compatible = "ti,tmp421"; 98 reg = <0x4e>; 99 }; 100 101 tmp112@48 { 102 compatible = "ti,tmp112"; 103 reg = <0x48>; 104 }; 105 106 eeprom@54 { 107 compatible = "atmel,24c64"; 108 reg = <0x54>; 109 pagesize = <32>; 110 }; 111}; 112 113&i2c7 { 114 status = "okay"; 115 116 adm1278@11 { 117 compatible = "adi,adm1278"; 118 reg = <0x11>; 119 }; 120}; 121 122&gfx { 123 status = "okay"; 124}; 125 126&pwm_tacho { 127 status = "okay"; 128 pinctrl-names = "default"; 129 pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; 130 131 fan@0 { 132 reg = <0x00>; 133 aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>; 134 }; 135 136 fan@1 { 137 reg = <0x01>; 138 aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>; 139 }; 140}; 141 142&adc { 143 status = "okay"; 144}; 145