1# SPDX-License-Identifier: GPL-2.0-only 2config VIRTIO_ANCHOR 3 bool 4 5config VIRTIO 6 tristate 7 select VIRTIO_ANCHOR 8 help 9 This option is selected by any driver which implements the virtio 10 bus, such as CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_MMIO, CONFIG_RPMSG 11 or CONFIG_S390_GUEST. 12 13config VIRTIO_PCI_LIB 14 tristate 15 help 16 Modern PCI device implementation. This module implements the 17 basic probe and control for devices which are based on modern 18 PCI device with possible vendor specific extensions. Any 19 module that selects this module must depend on PCI. 20 21config VIRTIO_PCI_LIB_LEGACY 22 tristate 23 help 24 Legacy PCI device (Virtio PCI Card 0.9.x Draft and older device) 25 implementation. 26 This module implements the basic probe and control for devices 27 which are based on legacy PCI device. Any module that selects this 28 module must depend on PCI. 29 30menuconfig VIRTIO_MENU 31 bool "Virtio drivers" 32 default y 33 34if VIRTIO_MENU 35 36config VIRTIO_HARDEN_NOTIFICATION 37 bool "Harden virtio notification" 38 depends on BROKEN 39 help 40 Enable this to harden the device notifications and suppress 41 those that happen at a time where notifications are illegal. 42 43 Experimental: Note that several drivers still have issues that 44 may cause crashes or hangs when correct handling of 45 notifications is enforced; depending on the subset of 46 drivers and devices you use, this may or may not work. 47 48 If unsure, say N. 49 50config VIRTIO_PCI 51 tristate "PCI driver for virtio devices" 52 depends on PCI 53 select VIRTIO_PCI_LIB 54 select VIRTIO 55 help 56 This driver provides support for virtio based paravirtual device 57 drivers over PCI. This requires that your VMM has appropriate PCI 58 virtio backends. Most QEMU based VMMs should support these devices 59 (like KVM or Xen). 60 61 If unsure, say M. 62 63config VIRTIO_PCI_ADMIN_LEGACY 64 bool 65 depends on VIRTIO_PCI && (X86 || COMPILE_TEST) 66 default y 67 68config VIRTIO_PCI_LEGACY 69 bool "Support for legacy virtio draft 0.9.X and older devices" 70 default y 71 depends on VIRTIO_PCI 72 select VIRTIO_PCI_LIB_LEGACY 73 help 74 Virtio PCI Card 0.9.X Draft (circa 2014) and older device support. 75 76 This option enables building a transitional driver, supporting 77 both devices conforming to Virtio 1 specification, and legacy devices. 78 If disabled, you get a slightly smaller, non-transitional driver, 79 with no legacy compatibility. 80 81 So look out into your driveway. Do you have a flying car? If 82 so, you can happily disable this option and virtio will not 83 break. Otherwise, leave it set. Unless you're testing what 84 life will be like in The Future. 85 86 If unsure, say Y. 87 88config VIRTIO_VDPA 89 tristate "vDPA driver for virtio devices" 90 depends on VDPA 91 select VIRTIO 92 help 93 This driver provides support for virtio based paravirtual 94 device driver over vDPA bus. For this to be useful, you need 95 an appropriate vDPA device implementation that operates on a 96 physical device to allow the datapath of virtio to be 97 offloaded to hardware. 98 99 If unsure, say M. 100 101config VIRTIO_PMEM 102 tristate "Support for virtio pmem driver" 103 depends on VIRTIO 104 depends on LIBNVDIMM 105 help 106 This driver provides access to virtio-pmem devices, storage devices 107 that are mapped into the physical address space - similar to NVDIMMs 108 - with a virtio-based flushing interface. 109 110 If unsure, say Y. 111 112config VIRTIO_BALLOON 113 tristate "Virtio balloon driver" 114 depends on VIRTIO 115 select MEMORY_BALLOON 116 select PAGE_REPORTING 117 help 118 This driver supports increasing and decreasing the amount 119 of memory within a KVM guest. 120 121 If unsure, say M. 122 123config VIRTIO_MEM 124 tristate "Virtio mem driver" 125 depends on X86_64 || ARM64 || RISCV || S390 126 depends on VIRTIO 127 depends on MEMORY_HOTPLUG 128 depends on MEMORY_HOTREMOVE 129 depends on CONTIG_ALLOC 130 depends on EXCLUSIVE_SYSTEM_RAM 131 help 132 This driver provides access to virtio-mem paravirtualized memory 133 devices, allowing to hotplug and hotunplug memory. 134 135 This driver currently supports x86-64, arm64, riscv and s390. 136 Although it should compile on other architectures that implement 137 memory hot(un)plug, architecture-specific and/or common 138 code changes may be required for virtio-mem, kdump and kexec to 139 work as expected. 140 141 If unsure, say M. 142 143config VIRTIO_INPUT 144 tristate "Virtio input driver" 145 depends on VIRTIO 146 depends on INPUT 147 help 148 This driver supports virtio input devices such as 149 keyboards, mice and tablets. 150 151 If unsure, say M. 152 153config VIRTIO_MMIO 154 tristate "Platform bus driver for memory mapped virtio devices" 155 depends on HAS_IOMEM && HAS_DMA 156 select VIRTIO 157 help 158 This drivers provides support for memory mapped virtio 159 platform device driver. 160 161 If unsure, say N. 162 163config VIRTIO_MMIO_CMDLINE_DEVICES 164 bool "Memory mapped virtio devices parameter parsing" 165 depends on VIRTIO_MMIO 166 help 167 Allow virtio-mmio devices instantiation via the kernel command line 168 or module parameters. Be aware that using incorrect parameters (base 169 address in particular) can crash your system - you have been warned. 170 See Documentation/admin-guide/kernel-parameters.rst for details. 171 172 If unsure, say 'N'. 173 174config VIRTIO_DMA_SHARED_BUFFER 175 tristate 176 depends on DMA_SHARED_BUFFER 177 help 178 This option adds a flavor of dma buffers that are backed by 179 virtio resources. 180 181config VIRTIO_DEBUG 182 bool "Debug facilities" 183 depends on VIRTIO 184 help 185 Enable this to expose debug facilities over debugfs. 186 This allows to debug features, to see what features the device 187 advertises and to set filter for features used by driver. 188 189 If unsure, say N. 190 191config VIRTIO_RTC 192 tristate "Virtio RTC driver" 193 depends on VIRTIO 194 depends on PTP_1588_CLOCK_OPTIONAL 195 help 196 This driver provides current time from a Virtio RTC device. The driver 197 provides the time through one or more clocks. The Virtio RTC PTP 198 clocks and/or the Real Time Clock driver for Virtio RTC must be 199 enabled to expose the clocks to userspace. 200 201 To compile this code as a module, choose M here: the module will be 202 called virtio_rtc. 203 204 If unsure, say M. 205 206if VIRTIO_RTC 207 208comment "WARNING: Consider enabling VIRTIO_RTC_PTP and/or VIRTIO_RTC_CLASS." 209 depends on !VIRTIO_RTC_PTP && !VIRTIO_RTC_CLASS 210 211comment "Enable PTP_1588_CLOCK in order to enable VIRTIO_RTC_PTP." 212 depends on PTP_1588_CLOCK=n 213 214config VIRTIO_RTC_PTP 215 bool "Virtio RTC PTP clocks" 216 default y 217 depends on PTP_1588_CLOCK 218 help 219 This exposes any Virtio RTC clocks as PTP Hardware Clocks (PHCs) to 220 userspace. The PHC sysfs attribute "clock_name" describes the clock 221 type. 222 223 If unsure, say Y. 224 225config VIRTIO_RTC_ARM 226 bool "Virtio RTC cross-timestamping using Arm Generic Timer" 227 default y 228 depends on VIRTIO_RTC_PTP && ARM_ARCH_TIMER 229 help 230 This enables Virtio RTC cross-timestamping using the Arm Generic Timer. 231 It only has an effect if the Virtio RTC device also supports this. The 232 cross-timestamp is available through the PTP clock driver precise 233 cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE2 aka 234 PTP_SYS_OFFSET_PRECISE). 235 236 If unsure, say Y. 237 238comment "Enable RTC_CLASS in order to enable VIRTIO_RTC_CLASS." 239 depends on RTC_CLASS=n 240 241config VIRTIO_RTC_CLASS 242 bool "Real Time Clock driver for Virtio RTC" 243 default y 244 depends on RTC_CLASS 245 help 246 This exposes the Virtio RTC UTC-like clock as a Linux Real Time Clock. 247 It only has an effect if the Virtio RTC device has a UTC-like clock 248 which smears leap seconds to avoid steps. The Real Time Clock is 249 read-only, and may support setting an alarm. 250 251 If unsure, say Y. 252 253endif # VIRTIO_RTC 254 255endif # VIRTIO_MENU 256