1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /* Geode LX framebuffer driver
3 *
4 * Copyright (C) 2006-2007, Advanced Micro Devices,Inc.
5 */
6
7 #include <linux/kernel.h>
8 #include <linux/errno.h>
9 #include <linux/fb.h>
10 #include <linux/uaccess.h>
11 #include <linux/delay.h>
12 #include <linux/cs5535.h>
13
14 #include "lxfb.h"
15
16 /* TODO
17 * Support panel scaling
18 * Add acceleration
19 * Add support for interlacing (TV out)
20 * Support compression
21 */
22
23 /* This is the complete list of PLL frequencies that we can set -
24 * we will choose the closest match to the incoming clock.
25 * freq is the frequency of the dotclock * 1000 (for example,
26 * 24823 = 24.983 Mhz).
27 * pllval is the corresponding PLL value
28 */
29
30 static const struct {
31 unsigned int pllval;
32 unsigned int freq;
33 } pll_table[] = {
34 { 0x000131AC, 6231 },
35 { 0x0001215D, 6294 },
36 { 0x00011087, 6750 },
37 { 0x0001216C, 7081 },
38 { 0x0001218D, 7140 },
39 { 0x000110C9, 7800 },
40 { 0x00013147, 7875 },
41 { 0x000110A7, 8258 },
42 { 0x00012159, 8778 },
43 { 0x00014249, 8875 },
44 { 0x00010057, 9000 },
45 { 0x0001219A, 9472 },
46 { 0x00012158, 9792 },
47 { 0x00010045, 10000 },
48 { 0x00010089, 10791 },
49 { 0x000110E7, 11225 },
50 { 0x00012136, 11430 },
51 { 0x00013207, 12375 },
52 { 0x00012187, 12500 },
53 { 0x00014286, 14063 },
54 { 0x000110E5, 15016 },
55 { 0x00014214, 16250 },
56 { 0x00011105, 17045 },
57 { 0x000131E4, 18563 },
58 { 0x00013183, 18750 },
59 { 0x00014284, 19688 },
60 { 0x00011104, 20400 },
61 { 0x00016363, 23625 },
62 { 0x000031AC, 24923 },
63 { 0x0000215D, 25175 },
64 { 0x00001087, 27000 },
65 { 0x0000216C, 28322 },
66 { 0x0000218D, 28560 },
67 { 0x000010C9, 31200 },
68 { 0x00003147, 31500 },
69 { 0x000010A7, 33032 },
70 { 0x00002159, 35112 },
71 { 0x00004249, 35500 },
72 { 0x00000057, 36000 },
73 { 0x0000219A, 37889 },
74 { 0x00002158, 39168 },
75 { 0x00000045, 40000 },
76 { 0x00000089, 43163 },
77 { 0x000010E7, 44900 },
78 { 0x00002136, 45720 },
79 { 0x00003207, 49500 },
80 { 0x00002187, 50000 },
81 { 0x00004286, 56250 },
82 { 0x000010E5, 60065 },
83 { 0x00004214, 65000 },
84 { 0x00001105, 68179 },
85 { 0x000031E4, 74250 },
86 { 0x00003183, 75000 },
87 { 0x00004284, 78750 },
88 { 0x00001104, 81600 },
89 { 0x00006363, 94500 },
90 { 0x00005303, 97520 },
91 { 0x00002183, 100187 },
92 { 0x00002122, 101420 },
93 { 0x00001081, 108000 },
94 { 0x00006201, 113310 },
95 { 0x00000041, 119650 },
96 { 0x000041A1, 129600 },
97 { 0x00002182, 133500 },
98 { 0x000041B1, 135000 },
99 { 0x00000051, 144000 },
100 { 0x000041E1, 148500 },
101 { 0x000062D1, 157500 },
102 { 0x000031A1, 162000 },
103 { 0x00000061, 169203 },
104 { 0x00004231, 172800 },
105 { 0x00002151, 175500 },
106 { 0x000052E1, 189000 },
107 { 0x00000071, 192000 },
108 { 0x00003201, 198000 },
109 { 0x00004291, 202500 },
110 { 0x00001101, 204750 },
111 { 0x00007481, 218250 },
112 { 0x00004170, 229500 },
113 { 0x00006210, 234000 },
114 { 0x00003140, 251182 },
115 { 0x00006250, 261000 },
116 { 0x000041C0, 278400 },
117 { 0x00005220, 280640 },
118 { 0x00000050, 288000 },
119 { 0x000041E0, 297000 },
120 { 0x00002130, 320207 }
121 };
122
123
lx_set_dotpll(u32 pllval)124 static void lx_set_dotpll(u32 pllval)
125 {
126 u32 dotpll_lo, dotpll_hi;
127 int i;
128
129 rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
130
131 if ((dotpll_lo & MSR_GLCP_DOTPLL_LOCK) && (dotpll_hi == pllval))
132 return;
133
134 dotpll_hi = pllval;
135 dotpll_lo &= ~(MSR_GLCP_DOTPLL_BYPASS | MSR_GLCP_DOTPLL_HALFPIX);
136 dotpll_lo |= MSR_GLCP_DOTPLL_DOTRESET;
137
138 wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
139
140 /* Wait 100us for the PLL to lock */
141
142 udelay(100);
143
144 /* Now, loop for the lock bit */
145
146 for (i = 0; i < 1000; i++) {
147 rdmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
148 if (dotpll_lo & MSR_GLCP_DOTPLL_LOCK)
149 break;
150 }
151
152 /* Clear the reset bit */
153
154 dotpll_lo &= ~MSR_GLCP_DOTPLL_DOTRESET;
155 wrmsr(MSR_GLCP_DOTPLL, dotpll_lo, dotpll_hi);
156 }
157
158 /* Set the clock based on the frequency specified by the current mode */
159
lx_set_clock(struct fb_info * info)160 static void lx_set_clock(struct fb_info *info)
161 {
162 unsigned int diff, min, best = 0;
163 unsigned int freq, i;
164
165 freq = (unsigned int) (1000000000 / info->var.pixclock);
166
167 min = abs(pll_table[0].freq - freq);
168
169 for (i = 0; i < ARRAY_SIZE(pll_table); i++) {
170 diff = abs(pll_table[i].freq - freq);
171 if (diff < min) {
172 min = diff;
173 best = i;
174 }
175 }
176
177 lx_set_dotpll(pll_table[best].pllval & 0x00017FFF);
178 }
179
lx_graphics_disable(struct fb_info * info)180 static void lx_graphics_disable(struct fb_info *info)
181 {
182 struct lxfb_par *par = info->par;
183 unsigned int val, gcfg;
184
185 /* Note: This assumes that the video is in a quitet state */
186
187 write_vp(par, VP_A1T, 0);
188 write_vp(par, VP_A2T, 0);
189 write_vp(par, VP_A3T, 0);
190
191 /* Turn off the VGA and video enable */
192 val = read_dc(par, DC_GENERAL_CFG) & ~(DC_GENERAL_CFG_VGAE |
193 DC_GENERAL_CFG_VIDE);
194
195 write_dc(par, DC_GENERAL_CFG, val);
196
197 val = read_vp(par, VP_VCFG) & ~VP_VCFG_VID_EN;
198 write_vp(par, VP_VCFG, val);
199
200 write_dc(par, DC_IRQ, DC_IRQ_MASK | DC_IRQ_VIP_VSYNC_LOSS_IRQ_MASK |
201 DC_IRQ_STATUS | DC_IRQ_VIP_VSYNC_IRQ_STATUS);
202
203 val = read_dc(par, DC_GENLK_CTL) & ~DC_GENLK_CTL_GENLK_EN;
204 write_dc(par, DC_GENLK_CTL, val);
205
206 val = read_dc(par, DC_CLR_KEY);
207 write_dc(par, DC_CLR_KEY, val & ~DC_CLR_KEY_CLR_KEY_EN);
208
209 /* turn off the panel */
210 write_fp(par, FP_PM, read_fp(par, FP_PM) & ~FP_PM_P);
211
212 val = read_vp(par, VP_MISC) | VP_MISC_DACPWRDN;
213 write_vp(par, VP_MISC, val);
214
215 /* Turn off the display */
216
217 val = read_vp(par, VP_DCFG);
218 write_vp(par, VP_DCFG, val & ~(VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN |
219 VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN));
220
221 gcfg = read_dc(par, DC_GENERAL_CFG);
222 gcfg &= ~(DC_GENERAL_CFG_CMPE | DC_GENERAL_CFG_DECE);
223 write_dc(par, DC_GENERAL_CFG, gcfg);
224
225 /* Turn off the TGEN */
226 val = read_dc(par, DC_DISPLAY_CFG);
227 val &= ~DC_DISPLAY_CFG_TGEN;
228 write_dc(par, DC_DISPLAY_CFG, val);
229
230 /* Wait 1000 usecs to ensure that the TGEN is clear */
231 udelay(1000);
232
233 /* Turn off the FIFO loader */
234
235 gcfg &= ~DC_GENERAL_CFG_DFLE;
236 write_dc(par, DC_GENERAL_CFG, gcfg);
237
238 /* Lastly, wait for the GP to go idle */
239
240 do {
241 val = read_gp(par, GP_BLT_STATUS);
242 } while ((val & GP_BLT_STATUS_PB) || !(val & GP_BLT_STATUS_CE));
243 }
244
lx_graphics_enable(struct fb_info * info)245 static void lx_graphics_enable(struct fb_info *info)
246 {
247 struct lxfb_par *par = info->par;
248 u32 temp, config;
249
250 /* Set the video request register */
251 write_vp(par, VP_VRR, 0);
252
253 /* Set up the polarities */
254
255 config = read_vp(par, VP_DCFG);
256
257 config &= ~(VP_DCFG_CRT_SYNC_SKW | VP_DCFG_PWR_SEQ_DELAY |
258 VP_DCFG_CRT_HSYNC_POL | VP_DCFG_CRT_VSYNC_POL);
259
260 config |= (VP_DCFG_CRT_SYNC_SKW_DEFAULT | VP_DCFG_PWR_SEQ_DELAY_DEFAULT
261 | VP_DCFG_GV_GAM);
262
263 if (info->var.sync & FB_SYNC_HOR_HIGH_ACT)
264 config |= VP_DCFG_CRT_HSYNC_POL;
265
266 if (info->var.sync & FB_SYNC_VERT_HIGH_ACT)
267 config |= VP_DCFG_CRT_VSYNC_POL;
268
269 if (par->output & OUTPUT_PANEL) {
270 u32 msrlo, msrhi;
271
272 write_fp(par, FP_PT1, 0);
273 temp = FP_PT2_SCRC;
274
275 if (!(info->var.sync & FB_SYNC_HOR_HIGH_ACT))
276 temp |= FP_PT2_HSP;
277
278 if (!(info->var.sync & FB_SYNC_VERT_HIGH_ACT))
279 temp |= FP_PT2_VSP;
280
281 write_fp(par, FP_PT2, temp);
282 write_fp(par, FP_DFC, FP_DFC_BC);
283
284 msrlo = MSR_LX_MSR_PADSEL_TFT_SEL_LOW;
285 msrhi = MSR_LX_MSR_PADSEL_TFT_SEL_HIGH;
286
287 wrmsr(MSR_LX_MSR_PADSEL, msrlo, msrhi);
288 }
289
290 if (par->output & OUTPUT_CRT) {
291 config |= VP_DCFG_CRT_EN | VP_DCFG_HSYNC_EN |
292 VP_DCFG_VSYNC_EN | VP_DCFG_DAC_BL_EN;
293 }
294
295 write_vp(par, VP_DCFG, config);
296
297 /* Turn the CRT dacs back on */
298
299 if (par->output & OUTPUT_CRT) {
300 temp = read_vp(par, VP_MISC);
301 temp &= ~(VP_MISC_DACPWRDN | VP_MISC_APWRDN);
302 write_vp(par, VP_MISC, temp);
303 }
304
305 /* Turn the panel on (if it isn't already) */
306 if (par->output & OUTPUT_PANEL)
307 write_fp(par, FP_PM, read_fp(par, FP_PM) | FP_PM_P);
308 }
309
lx_framebuffer_size(void)310 unsigned int lx_framebuffer_size(void)
311 {
312 unsigned int val;
313
314 if (!cs5535_has_vsa2()) {
315 uint32_t hi, lo;
316
317 /* The number of pages is (PMAX - PMIN)+1 */
318 rdmsr(MSR_GLIU_P2D_RO0, lo, hi);
319
320 /* PMAX */
321 val = ((hi & 0xff) << 12) | ((lo & 0xfff00000) >> 20);
322 /* PMIN */
323 val -= (lo & 0x000fffff);
324 val += 1;
325
326 /* The page size is 4k */
327 return (val << 12);
328 }
329
330 /* The frame buffer size is reported by a VSM in VSA II */
331 /* Virtual Register Class = 0x02 */
332 /* VG_MEM_SIZE (1MB units) = 0x00 */
333
334 outw(VSA_VR_UNLOCK, VSA_VRC_INDEX);
335 outw(VSA_VR_MEM_SIZE, VSA_VRC_INDEX);
336
337 val = (unsigned int)(inw(VSA_VRC_DATA)) & 0xFE;
338 return (val << 20);
339 }
340
lx_set_mode(struct fb_info * info)341 void lx_set_mode(struct fb_info *info)
342 {
343 struct lxfb_par *par = info->par;
344 u64 msrval;
345
346 unsigned int max, dv, val, size;
347
348 unsigned int gcfg, dcfg;
349 int hactive, hblankstart, hsyncstart, hsyncend, hblankend, htotal;
350 int vactive, vblankstart, vsyncstart, vsyncend, vblankend, vtotal;
351
352 /* Unlock the DC registers */
353 write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
354
355 lx_graphics_disable(info);
356
357 lx_set_clock(info);
358
359 /* Set output mode */
360
361 rdmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
362 msrval &= ~MSR_LX_GLD_MSR_CONFIG_FMT;
363
364 if (par->output & OUTPUT_PANEL) {
365 msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_FP;
366
367 if (par->output & OUTPUT_CRT)
368 msrval |= MSR_LX_GLD_MSR_CONFIG_FPC;
369 else
370 msrval &= ~MSR_LX_GLD_MSR_CONFIG_FPC;
371 } else
372 msrval |= MSR_LX_GLD_MSR_CONFIG_FMT_CRT;
373
374 wrmsrl(MSR_LX_GLD_MSR_CONFIG, msrval);
375
376 /* Clear the various buffers */
377 /* FIXME: Adjust for panning here */
378
379 write_dc(par, DC_FB_ST_OFFSET, 0);
380 write_dc(par, DC_CB_ST_OFFSET, 0);
381 write_dc(par, DC_CURS_ST_OFFSET, 0);
382
383 /* FIXME: Add support for interlacing */
384 /* FIXME: Add support for scaling */
385
386 val = read_dc(par, DC_GENLK_CTL);
387 val &= ~(DC_GENLK_CTL_ALPHA_FLICK_EN | DC_GENLK_CTL_FLICK_EN |
388 DC_GENLK_CTL_FLICK_SEL_MASK);
389
390 /* Default scaling params */
391
392 write_dc(par, DC_GFX_SCALE, (0x4000 << 16) | 0x4000);
393 write_dc(par, DC_IRQ_FILT_CTL, 0);
394 write_dc(par, DC_GENLK_CTL, val);
395
396 /* FIXME: Support compression */
397
398 if (info->fix.line_length > 4096)
399 dv = DC_DV_CTL_DV_LINE_SIZE_8K;
400 else if (info->fix.line_length > 2048)
401 dv = DC_DV_CTL_DV_LINE_SIZE_4K;
402 else if (info->fix.line_length > 1024)
403 dv = DC_DV_CTL_DV_LINE_SIZE_2K;
404 else
405 dv = DC_DV_CTL_DV_LINE_SIZE_1K;
406
407 max = info->fix.line_length * info->var.yres;
408 max = (max + 0x3FF) & 0xFFFFFC00;
409
410 write_dc(par, DC_DV_TOP, max | DC_DV_TOP_DV_TOP_EN);
411
412 val = read_dc(par, DC_DV_CTL) & ~DC_DV_CTL_DV_LINE_SIZE;
413 write_dc(par, DC_DV_CTL, val | dv);
414
415 size = info->var.xres * (info->var.bits_per_pixel >> 3);
416
417 write_dc(par, DC_GFX_PITCH, info->fix.line_length >> 3);
418 write_dc(par, DC_LINE_SIZE, (size + 7) >> 3);
419
420 /* Set default watermark values */
421
422 rdmsrl(MSR_LX_SPARE_MSR, msrval);
423
424 msrval &= ~(MSR_LX_SPARE_MSR_DIS_CFIFO_HGO
425 | MSR_LX_SPARE_MSR_VFIFO_ARB_SEL
426 | MSR_LX_SPARE_MSR_LOAD_WM_LPEN_M
427 | MSR_LX_SPARE_MSR_WM_LPEN_OVRD);
428 msrval |= MSR_LX_SPARE_MSR_DIS_VIFO_WM |
429 MSR_LX_SPARE_MSR_DIS_INIT_V_PRI;
430 wrmsrl(MSR_LX_SPARE_MSR, msrval);
431
432 gcfg = DC_GENERAL_CFG_DFLE; /* Display fifo enable */
433 gcfg |= (0x6 << DC_GENERAL_CFG_DFHPSL_SHIFT) | /* default priority */
434 (0xb << DC_GENERAL_CFG_DFHPEL_SHIFT);
435 gcfg |= DC_GENERAL_CFG_FDTY; /* Set the frame dirty mode */
436
437 dcfg = DC_DISPLAY_CFG_VDEN; /* Enable video data */
438 dcfg |= DC_DISPLAY_CFG_GDEN; /* Enable graphics */
439 dcfg |= DC_DISPLAY_CFG_TGEN; /* Turn on the timing generator */
440 dcfg |= DC_DISPLAY_CFG_TRUP; /* Update timings immediately */
441 dcfg |= DC_DISPLAY_CFG_PALB; /* Palette bypass in > 8 bpp modes */
442 dcfg |= DC_DISPLAY_CFG_VISL;
443 dcfg |= DC_DISPLAY_CFG_DCEN; /* Always center the display */
444
445 /* Set the current BPP mode */
446
447 switch (info->var.bits_per_pixel) {
448 case 8:
449 dcfg |= DC_DISPLAY_CFG_DISP_MODE_8BPP;
450 break;
451
452 case 16:
453 dcfg |= DC_DISPLAY_CFG_DISP_MODE_16BPP;
454 break;
455
456 case 32:
457 case 24:
458 dcfg |= DC_DISPLAY_CFG_DISP_MODE_24BPP;
459 break;
460 }
461
462 /* Now - set up the timings */
463
464 hactive = info->var.xres;
465 hblankstart = hactive;
466 hsyncstart = hblankstart + info->var.right_margin;
467 hsyncend = hsyncstart + info->var.hsync_len;
468 hblankend = hsyncend + info->var.left_margin;
469 htotal = hblankend;
470
471 vactive = info->var.yres;
472 vblankstart = vactive;
473 vsyncstart = vblankstart + info->var.lower_margin;
474 vsyncend = vsyncstart + info->var.vsync_len;
475 vblankend = vsyncend + info->var.upper_margin;
476 vtotal = vblankend;
477
478 write_dc(par, DC_H_ACTIVE_TIMING, (hactive - 1) | ((htotal - 1) << 16));
479 write_dc(par, DC_H_BLANK_TIMING,
480 (hblankstart - 1) | ((hblankend - 1) << 16));
481 write_dc(par, DC_H_SYNC_TIMING,
482 (hsyncstart - 1) | ((hsyncend - 1) << 16));
483
484 write_dc(par, DC_V_ACTIVE_TIMING, (vactive - 1) | ((vtotal - 1) << 16));
485 write_dc(par, DC_V_BLANK_TIMING,
486 (vblankstart - 1) | ((vblankend - 1) << 16));
487 write_dc(par, DC_V_SYNC_TIMING,
488 (vsyncstart - 1) | ((vsyncend - 1) << 16));
489
490 write_dc(par, DC_FB_ACTIVE,
491 (info->var.xres - 1) << 16 | (info->var.yres - 1));
492
493 /* And re-enable the graphics output */
494 lx_graphics_enable(info);
495
496 /* Write the two main configuration registers */
497 write_dc(par, DC_DISPLAY_CFG, dcfg);
498 write_dc(par, DC_ARB_CFG, 0);
499 write_dc(par, DC_GENERAL_CFG, gcfg);
500
501 /* Lock the DC registers */
502 write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
503 }
504
lx_set_palette_reg(struct fb_info * info,unsigned regno,unsigned red,unsigned green,unsigned blue)505 void lx_set_palette_reg(struct fb_info *info, unsigned regno,
506 unsigned red, unsigned green, unsigned blue)
507 {
508 struct lxfb_par *par = info->par;
509 int val;
510
511 /* Hardware palette is in RGB 8-8-8 format. */
512
513 val = (red << 8) & 0xff0000;
514 val |= (green) & 0x00ff00;
515 val |= (blue >> 8) & 0x0000ff;
516
517 write_dc(par, DC_PAL_ADDRESS, regno);
518 write_dc(par, DC_PAL_DATA, val);
519 }
520
lx_blank_display(struct fb_info * info,int blank_mode)521 int lx_blank_display(struct fb_info *info, int blank_mode)
522 {
523 struct lxfb_par *par = info->par;
524 u32 dcfg, misc, fp_pm;
525 int blank, hsync, vsync;
526
527 /* CRT power saving modes. */
528 switch (blank_mode) {
529 case FB_BLANK_UNBLANK:
530 blank = 0; hsync = 1; vsync = 1;
531 break;
532 case FB_BLANK_NORMAL:
533 blank = 1; hsync = 1; vsync = 1;
534 break;
535 case FB_BLANK_VSYNC_SUSPEND:
536 blank = 1; hsync = 1; vsync = 0;
537 break;
538 case FB_BLANK_HSYNC_SUSPEND:
539 blank = 1; hsync = 0; vsync = 1;
540 break;
541 case FB_BLANK_POWERDOWN:
542 blank = 1; hsync = 0; vsync = 0;
543 break;
544 default:
545 return -EINVAL;
546 }
547
548 dcfg = read_vp(par, VP_DCFG);
549 dcfg &= ~(VP_DCFG_DAC_BL_EN | VP_DCFG_HSYNC_EN | VP_DCFG_VSYNC_EN |
550 VP_DCFG_CRT_EN);
551 if (!blank)
552 dcfg |= VP_DCFG_DAC_BL_EN | VP_DCFG_CRT_EN;
553 if (hsync)
554 dcfg |= VP_DCFG_HSYNC_EN;
555 if (vsync)
556 dcfg |= VP_DCFG_VSYNC_EN;
557
558 write_vp(par, VP_DCFG, dcfg);
559
560 misc = read_vp(par, VP_MISC);
561
562 if (vsync && hsync)
563 misc &= ~VP_MISC_DACPWRDN;
564 else
565 misc |= VP_MISC_DACPWRDN;
566
567 write_vp(par, VP_MISC, misc);
568
569 /* Power on/off flat panel */
570
571 if (par->output & OUTPUT_PANEL) {
572 fp_pm = read_fp(par, FP_PM);
573 if (blank_mode == FB_BLANK_POWERDOWN)
574 fp_pm &= ~FP_PM_P;
575 else
576 fp_pm |= FP_PM_P;
577 write_fp(par, FP_PM, fp_pm);
578 }
579
580 return 0;
581 }
582
lx_save_regs(struct lxfb_par * par)583 static void lx_save_regs(struct lxfb_par *par)
584 {
585 uint32_t filt;
586 int i;
587
588 /* wait for the BLT engine to stop being busy */
589 do {
590 i = read_gp(par, GP_BLT_STATUS);
591 } while ((i & GP_BLT_STATUS_PB) || !(i & GP_BLT_STATUS_CE));
592
593 /* save MSRs */
594 rdmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
595 rdmsrl(MSR_GLCP_DOTPLL, par->msr.dotpll);
596 rdmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
597 rdmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
598
599 write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
600
601 /* save registers */
602 memcpy(par->gp, par->gp_regs, sizeof(par->gp));
603 memcpy(par->dc, par->dc_regs, sizeof(par->dc));
604 memcpy(par->vp, par->vp_regs, sizeof(par->vp));
605 memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
606
607 /* save the display controller palette */
608 write_dc(par, DC_PAL_ADDRESS, 0);
609 for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
610 par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
611
612 /* save the video processor palette */
613 write_vp(par, VP_PAR, 0);
614 for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
615 par->vp_pal[i] = read_vp(par, VP_PDR);
616
617 /* save the horizontal filter coefficients */
618 filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
619 for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
620 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
621 par->hcoeff[i] = read_dc(par, DC_FILT_COEFF1);
622 par->hcoeff[i + 1] = read_dc(par, DC_FILT_COEFF2);
623 }
624
625 /* save the vertical filter coefficients */
626 filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
627 for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
628 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
629 par->vcoeff[i] = read_dc(par, DC_FILT_COEFF1);
630 }
631
632 /* save video coeff ram */
633 memcpy(par->vp_coeff, par->vp_regs + VP_VCR, sizeof(par->vp_coeff));
634 }
635
lx_restore_gfx_proc(struct lxfb_par * par)636 static void lx_restore_gfx_proc(struct lxfb_par *par)
637 {
638 int i;
639
640 /* a bunch of registers require GP_RASTER_MODE to be set first */
641 write_gp(par, GP_RASTER_MODE, par->gp[GP_RASTER_MODE]);
642
643 for (i = 0; i < ARRAY_SIZE(par->gp); i++) {
644 switch (i) {
645 case GP_RASTER_MODE:
646 case GP_VECTOR_MODE:
647 case GP_BLT_MODE:
648 case GP_BLT_STATUS:
649 case GP_HST_SRC:
650 /* FIXME: restore LUT data */
651 case GP_LUT_INDEX:
652 case GP_LUT_DATA:
653 /* don't restore these registers */
654 break;
655
656 default:
657 write_gp(par, i, par->gp[i]);
658 }
659 }
660 }
661
lx_restore_display_ctlr(struct lxfb_par * par)662 static void lx_restore_display_ctlr(struct lxfb_par *par)
663 {
664 uint32_t filt;
665 int i;
666
667 wrmsrl(MSR_LX_SPARE_MSR, par->msr.dcspare);
668
669 for (i = 0; i < ARRAY_SIZE(par->dc); i++) {
670 switch (i) {
671 case DC_UNLOCK:
672 /* unlock the DC; runs first */
673 write_dc(par, DC_UNLOCK, DC_UNLOCK_UNLOCK);
674 break;
675
676 case DC_GENERAL_CFG:
677 case DC_DISPLAY_CFG:
678 /* disable all while restoring */
679 write_dc(par, i, 0);
680 break;
681
682 case DC_DV_CTL:
683 /* set all ram to dirty */
684 write_dc(par, i, par->dc[i] | DC_DV_CTL_CLEAR_DV_RAM);
685 break;
686
687 case DC_RSVD_1:
688 case DC_RSVD_2:
689 case DC_RSVD_3:
690 case DC_LINE_CNT:
691 case DC_PAL_ADDRESS:
692 case DC_PAL_DATA:
693 case DC_DFIFO_DIAG:
694 case DC_CFIFO_DIAG:
695 case DC_FILT_COEFF1:
696 case DC_FILT_COEFF2:
697 case DC_RSVD_4:
698 case DC_RSVD_5:
699 /* don't restore these registers */
700 break;
701
702 default:
703 write_dc(par, i, par->dc[i]);
704 }
705 }
706
707 /* restore the palette */
708 write_dc(par, DC_PAL_ADDRESS, 0);
709 for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
710 write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
711
712 /* restore the horizontal filter coefficients */
713 filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
714 for (i = 0; i < ARRAY_SIZE(par->hcoeff); i += 2) {
715 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
716 write_dc(par, DC_FILT_COEFF1, par->hcoeff[i]);
717 write_dc(par, DC_FILT_COEFF2, par->hcoeff[i + 1]);
718 }
719
720 /* restore the vertical filter coefficients */
721 filt &= ~DC_IRQ_FILT_CTL_H_FILT_SEL;
722 for (i = 0; i < ARRAY_SIZE(par->vcoeff); i++) {
723 write_dc(par, DC_IRQ_FILT_CTL, (filt & 0xffffff00) | i);
724 write_dc(par, DC_FILT_COEFF1, par->vcoeff[i]);
725 }
726 }
727
lx_restore_video_proc(struct lxfb_par * par)728 static void lx_restore_video_proc(struct lxfb_par *par)
729 {
730 int i;
731
732 wrmsrl(MSR_LX_GLD_MSR_CONFIG, par->msr.dfglcfg);
733 wrmsrl(MSR_LX_MSR_PADSEL, par->msr.padsel);
734
735 for (i = 0; i < ARRAY_SIZE(par->vp); i++) {
736 switch (i) {
737 case VP_VCFG:
738 case VP_DCFG:
739 case VP_PAR:
740 case VP_PDR:
741 case VP_CCS:
742 case VP_RSVD_0:
743 /* case VP_VDC: */ /* why should this not be restored? */
744 case VP_RSVD_1:
745 case VP_CRC32:
746 /* don't restore these registers */
747 break;
748
749 default:
750 write_vp(par, i, par->vp[i]);
751 }
752 }
753
754 /* restore video processor palette */
755 write_vp(par, VP_PAR, 0);
756 for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
757 write_vp(par, VP_PDR, par->vp_pal[i]);
758
759 /* restore video coeff ram */
760 memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
761 }
762
lx_restore_regs(struct lxfb_par * par)763 static void lx_restore_regs(struct lxfb_par *par)
764 {
765 int i;
766
767 lx_set_dotpll((u32) (par->msr.dotpll >> 32));
768 lx_restore_gfx_proc(par);
769 lx_restore_display_ctlr(par);
770 lx_restore_video_proc(par);
771
772 /* Flat Panel */
773 for (i = 0; i < ARRAY_SIZE(par->fp); i++) {
774 switch (i) {
775 case FP_PM:
776 case FP_RSVD_0:
777 case FP_RSVD_1:
778 case FP_RSVD_2:
779 case FP_RSVD_3:
780 case FP_RSVD_4:
781 /* don't restore these registers */
782 break;
783
784 default:
785 write_fp(par, i, par->fp[i]);
786 }
787 }
788
789 /* control the panel */
790 if (par->fp[FP_PM] & FP_PM_P) {
791 /* power on the panel if not already power{ed,ing} on */
792 if (!(read_fp(par, FP_PM) &
793 (FP_PM_PANEL_ON|FP_PM_PANEL_PWR_UP)))
794 write_fp(par, FP_PM, par->fp[FP_PM]);
795 } else {
796 /* power down the panel if not already power{ed,ing} down */
797 if (!(read_fp(par, FP_PM) &
798 (FP_PM_PANEL_OFF|FP_PM_PANEL_PWR_DOWN)))
799 write_fp(par, FP_PM, par->fp[FP_PM]);
800 }
801
802 /* turn everything on */
803 write_vp(par, VP_VCFG, par->vp[VP_VCFG]);
804 write_vp(par, VP_DCFG, par->vp[VP_DCFG]);
805 write_dc(par, DC_DISPLAY_CFG, par->dc[DC_DISPLAY_CFG]);
806 /* do this last; it will enable the FIFO load */
807 write_dc(par, DC_GENERAL_CFG, par->dc[DC_GENERAL_CFG]);
808
809 /* lock the door behind us */
810 write_dc(par, DC_UNLOCK, DC_UNLOCK_LOCK);
811 }
812
lx_powerdown(struct fb_info * info)813 int lx_powerdown(struct fb_info *info)
814 {
815 struct lxfb_par *par = info->par;
816
817 if (par->powered_down)
818 return 0;
819
820 lx_save_regs(par);
821 lx_graphics_disable(info);
822
823 par->powered_down = 1;
824 return 0;
825 }
826
lx_powerup(struct fb_info * info)827 int lx_powerup(struct fb_info *info)
828 {
829 struct lxfb_par *par = info->par;
830
831 if (!par->powered_down)
832 return 0;
833
834 lx_restore_regs(par);
835
836 par->powered_down = 0;
837 return 0;
838 }
839