1 /* Driver for Datafab USB Compact Flash reader 2 * 3 * datafab driver v0.1: 4 * 5 * First release 6 * 7 * Current development and maintenance by: 8 * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org) 9 * 10 * Many thanks to Robert Baruch for the SanDisk SmartMedia reader driver 11 * which I used as a template for this driver. 12 * 13 * Some bugfixes and scatter-gather code by Gregory P. Smith 14 * (greg-usb@electricrain.com) 15 * 16 * Fix for media change by Joerg Schneider (js@joergschneider.com) 17 * 18 * Other contributors: 19 * (c) 2002 Alan Stern <stern@rowland.org> 20 * 21 * This program is free software; you can redistribute it and/or modify it 22 * under the terms of the GNU General Public License as published by the 23 * Free Software Foundation; either version 2, or (at your option) any 24 * later version. 25 * 26 * This program is distributed in the hope that it will be useful, but 27 * WITHOUT ANY WARRANTY; without even the implied warranty of 28 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 29 * General Public License for more details. 30 * 31 * You should have received a copy of the GNU General Public License along 32 * with this program; if not, write to the Free Software Foundation, Inc., 33 * 675 Mass Ave, Cambridge, MA 02139, USA. 34 */ 35 36 /* 37 * This driver attempts to support USB CompactFlash reader/writer devices 38 * based on Datafab USB-to-ATA chips. It was specifically developed for the 39 * Datafab MDCFE-B USB CompactFlash reader but has since been found to work 40 * with a variety of Datafab-based devices from a number of manufacturers. 41 * I've received a report of this driver working with a Datafab-based 42 * SmartMedia device though please be aware that I'm personally unable to 43 * test SmartMedia support. 44 * 45 * This driver supports reading and writing. If you're truly paranoid, 46 * however, you can force the driver into a write-protected state by setting 47 * the WP enable bits in datafab_handle_mode_sense(). See the comments 48 * in that routine. 49 */ 50 51 #include <linux/errno.h> 52 #include <linux/module.h> 53 #include <linux/slab.h> 54 55 #include <scsi/scsi.h> 56 #include <scsi/scsi_cmnd.h> 57 58 #include "usb.h" 59 #include "transport.h" 60 #include "protocol.h" 61 #include "debug.h" 62 63 MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); 64 MODULE_AUTHOR("Jimmie Mayfield <mayfield+datafab@sackheads.org>"); 65 MODULE_LICENSE("GPL"); 66 67 struct datafab_info { 68 unsigned long sectors; /* total sector count */ 69 unsigned long ssize; /* sector size in bytes */ 70 signed char lun; /* used for dual-slot readers */ 71 72 /* the following aren't used yet */ 73 unsigned char sense_key; 74 unsigned long sense_asc; /* additional sense code */ 75 unsigned long sense_ascq; /* additional sense code qualifier */ 76 }; 77 78 static int datafab_determine_lun(struct us_data *us, 79 struct datafab_info *info); 80 81 82 /* 83 * The table of devices 84 */ 85 #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ 86 vendorName, productName, useProtocol, useTransport, \ 87 initFunction, flags) \ 88 { USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ 89 .driver_info = (flags) } 90 91 static struct usb_device_id datafab_usb_ids[] = { 92 # include "unusual_datafab.h" 93 { } /* Terminating entry */ 94 }; 95 MODULE_DEVICE_TABLE(usb, datafab_usb_ids); 96 97 #undef UNUSUAL_DEV 98 99 /* 100 * The flags table 101 */ 102 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ 103 vendor_name, product_name, use_protocol, use_transport, \ 104 init_function, Flags) \ 105 { \ 106 .vendorName = vendor_name, \ 107 .productName = product_name, \ 108 .useProtocol = use_protocol, \ 109 .useTransport = use_transport, \ 110 .initFunction = init_function, \ 111 } 112 113 static struct us_unusual_dev datafab_unusual_dev_list[] = { 114 # include "unusual_datafab.h" 115 { } /* Terminating entry */ 116 }; 117 118 #undef UNUSUAL_DEV 119 120 121 static inline int 122 datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { 123 if (len == 0) 124 return USB_STOR_XFER_GOOD; 125 126 usb_stor_dbg(us, "len = %d\n", len); 127 return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe, 128 data, len, NULL); 129 } 130 131 132 static inline int 133 datafab_bulk_write(struct us_data *us, unsigned char *data, unsigned int len) { 134 if (len == 0) 135 return USB_STOR_XFER_GOOD; 136 137 usb_stor_dbg(us, "len = %d\n", len); 138 return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe, 139 data, len, NULL); 140 } 141 142 143 static int datafab_read_data(struct us_data *us, 144 struct datafab_info *info, 145 u32 sector, 146 u32 sectors) 147 { 148 unsigned char *command = us->iobuf; 149 unsigned char *buffer; 150 unsigned char thistime; 151 unsigned int totallen, alloclen; 152 int len, result; 153 unsigned int sg_offset = 0; 154 struct scatterlist *sg = NULL; 155 156 // we're working in LBA mode. according to the ATA spec, 157 // we can support up to 28-bit addressing. I don't know if Datafab 158 // supports beyond 24-bit addressing. It's kind of hard to test 159 // since it requires > 8GB CF card. 160 // 161 if (sectors > 0x0FFFFFFF) 162 return USB_STOR_TRANSPORT_ERROR; 163 164 if (info->lun == -1) { 165 result = datafab_determine_lun(us, info); 166 if (result != USB_STOR_TRANSPORT_GOOD) 167 return result; 168 } 169 170 totallen = sectors * info->ssize; 171 172 // Since we don't read more than 64 KB at a time, we have to create 173 // a bounce buffer and move the data a piece at a time between the 174 // bounce buffer and the actual transfer buffer. 175 176 alloclen = min(totallen, 65536u); 177 buffer = kmalloc(alloclen, GFP_NOIO); 178 if (buffer == NULL) 179 return USB_STOR_TRANSPORT_ERROR; 180 181 do { 182 // loop, never allocate or transfer more than 64k at once 183 // (min(128k, 255*info->ssize) is the real limit) 184 185 len = min(totallen, alloclen); 186 thistime = (len / info->ssize) & 0xff; 187 188 command[0] = 0; 189 command[1] = thistime; 190 command[2] = sector & 0xFF; 191 command[3] = (sector >> 8) & 0xFF; 192 command[4] = (sector >> 16) & 0xFF; 193 194 command[5] = 0xE0 + (info->lun << 4); 195 command[5] |= (sector >> 24) & 0x0F; 196 command[6] = 0x20; 197 command[7] = 0x01; 198 199 // send the read command 200 result = datafab_bulk_write(us, command, 8); 201 if (result != USB_STOR_XFER_GOOD) 202 goto leave; 203 204 // read the result 205 result = datafab_bulk_read(us, buffer, len); 206 if (result != USB_STOR_XFER_GOOD) 207 goto leave; 208 209 // Store the data in the transfer buffer 210 usb_stor_access_xfer_buf(buffer, len, us->srb, 211 &sg, &sg_offset, TO_XFER_BUF); 212 213 sector += thistime; 214 totallen -= len; 215 } while (totallen > 0); 216 217 kfree(buffer); 218 return USB_STOR_TRANSPORT_GOOD; 219 220 leave: 221 kfree(buffer); 222 return USB_STOR_TRANSPORT_ERROR; 223 } 224 225 226 static int datafab_write_data(struct us_data *us, 227 struct datafab_info *info, 228 u32 sector, 229 u32 sectors) 230 { 231 unsigned char *command = us->iobuf; 232 unsigned char *reply = us->iobuf; 233 unsigned char *buffer; 234 unsigned char thistime; 235 unsigned int totallen, alloclen; 236 int len, result; 237 unsigned int sg_offset = 0; 238 struct scatterlist *sg = NULL; 239 240 // we're working in LBA mode. according to the ATA spec, 241 // we can support up to 28-bit addressing. I don't know if Datafab 242 // supports beyond 24-bit addressing. It's kind of hard to test 243 // since it requires > 8GB CF card. 244 // 245 if (sectors > 0x0FFFFFFF) 246 return USB_STOR_TRANSPORT_ERROR; 247 248 if (info->lun == -1) { 249 result = datafab_determine_lun(us, info); 250 if (result != USB_STOR_TRANSPORT_GOOD) 251 return result; 252 } 253 254 totallen = sectors * info->ssize; 255 256 // Since we don't write more than 64 KB at a time, we have to create 257 // a bounce buffer and move the data a piece at a time between the 258 // bounce buffer and the actual transfer buffer. 259 260 alloclen = min(totallen, 65536u); 261 buffer = kmalloc(alloclen, GFP_NOIO); 262 if (buffer == NULL) 263 return USB_STOR_TRANSPORT_ERROR; 264 265 do { 266 // loop, never allocate or transfer more than 64k at once 267 // (min(128k, 255*info->ssize) is the real limit) 268 269 len = min(totallen, alloclen); 270 thistime = (len / info->ssize) & 0xff; 271 272 // Get the data from the transfer buffer 273 usb_stor_access_xfer_buf(buffer, len, us->srb, 274 &sg, &sg_offset, FROM_XFER_BUF); 275 276 command[0] = 0; 277 command[1] = thistime; 278 command[2] = sector & 0xFF; 279 command[3] = (sector >> 8) & 0xFF; 280 command[4] = (sector >> 16) & 0xFF; 281 282 command[5] = 0xE0 + (info->lun << 4); 283 command[5] |= (sector >> 24) & 0x0F; 284 command[6] = 0x30; 285 command[7] = 0x02; 286 287 // send the command 288 result = datafab_bulk_write(us, command, 8); 289 if (result != USB_STOR_XFER_GOOD) 290 goto leave; 291 292 // send the data 293 result = datafab_bulk_write(us, buffer, len); 294 if (result != USB_STOR_XFER_GOOD) 295 goto leave; 296 297 // read the result 298 result = datafab_bulk_read(us, reply, 2); 299 if (result != USB_STOR_XFER_GOOD) 300 goto leave; 301 302 if (reply[0] != 0x50 && reply[1] != 0) { 303 usb_stor_dbg(us, "Gah! write return code: %02x %02x\n", 304 reply[0], reply[1]); 305 result = USB_STOR_TRANSPORT_ERROR; 306 goto leave; 307 } 308 309 sector += thistime; 310 totallen -= len; 311 } while (totallen > 0); 312 313 kfree(buffer); 314 return USB_STOR_TRANSPORT_GOOD; 315 316 leave: 317 kfree(buffer); 318 return USB_STOR_TRANSPORT_ERROR; 319 } 320 321 322 static int datafab_determine_lun(struct us_data *us, 323 struct datafab_info *info) 324 { 325 // Dual-slot readers can be thought of as dual-LUN devices. 326 // We need to determine which card slot is being used. 327 // We'll send an IDENTIFY DEVICE command and see which LUN responds... 328 // 329 // There might be a better way of doing this? 330 331 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; 332 unsigned char *command = us->iobuf; 333 unsigned char *buf; 334 int count = 0, rc; 335 336 if (!info) 337 return USB_STOR_TRANSPORT_ERROR; 338 339 memcpy(command, scommand, 8); 340 buf = kmalloc(512, GFP_NOIO); 341 if (!buf) 342 return USB_STOR_TRANSPORT_ERROR; 343 344 usb_stor_dbg(us, "locating...\n"); 345 346 // we'll try 3 times before giving up... 347 // 348 while (count++ < 3) { 349 command[5] = 0xa0; 350 351 rc = datafab_bulk_write(us, command, 8); 352 if (rc != USB_STOR_XFER_GOOD) { 353 rc = USB_STOR_TRANSPORT_ERROR; 354 goto leave; 355 } 356 357 rc = datafab_bulk_read(us, buf, 512); 358 if (rc == USB_STOR_XFER_GOOD) { 359 info->lun = 0; 360 rc = USB_STOR_TRANSPORT_GOOD; 361 goto leave; 362 } 363 364 command[5] = 0xb0; 365 366 rc = datafab_bulk_write(us, command, 8); 367 if (rc != USB_STOR_XFER_GOOD) { 368 rc = USB_STOR_TRANSPORT_ERROR; 369 goto leave; 370 } 371 372 rc = datafab_bulk_read(us, buf, 512); 373 if (rc == USB_STOR_XFER_GOOD) { 374 info->lun = 1; 375 rc = USB_STOR_TRANSPORT_GOOD; 376 goto leave; 377 } 378 379 msleep(20); 380 } 381 382 rc = USB_STOR_TRANSPORT_ERROR; 383 384 leave: 385 kfree(buf); 386 return rc; 387 } 388 389 static int datafab_id_device(struct us_data *us, 390 struct datafab_info *info) 391 { 392 // this is a variation of the ATA "IDENTIFY DEVICE" command...according 393 // to the ATA spec, 'Sector Count' isn't used but the Windows driver 394 // sets this bit so we do too... 395 // 396 static unsigned char scommand[8] = { 0, 1, 0, 0, 0, 0xa0, 0xec, 1 }; 397 unsigned char *command = us->iobuf; 398 unsigned char *reply; 399 int rc; 400 401 if (!info) 402 return USB_STOR_TRANSPORT_ERROR; 403 404 if (info->lun == -1) { 405 rc = datafab_determine_lun(us, info); 406 if (rc != USB_STOR_TRANSPORT_GOOD) 407 return rc; 408 } 409 410 memcpy(command, scommand, 8); 411 reply = kmalloc(512, GFP_NOIO); 412 if (!reply) 413 return USB_STOR_TRANSPORT_ERROR; 414 415 command[5] += (info->lun << 4); 416 417 rc = datafab_bulk_write(us, command, 8); 418 if (rc != USB_STOR_XFER_GOOD) { 419 rc = USB_STOR_TRANSPORT_ERROR; 420 goto leave; 421 } 422 423 // we'll go ahead and extract the media capacity while we're here... 424 // 425 rc = datafab_bulk_read(us, reply, 512); 426 if (rc == USB_STOR_XFER_GOOD) { 427 // capacity is at word offset 57-58 428 // 429 info->sectors = ((u32)(reply[117]) << 24) | 430 ((u32)(reply[116]) << 16) | 431 ((u32)(reply[115]) << 8) | 432 ((u32)(reply[114]) ); 433 rc = USB_STOR_TRANSPORT_GOOD; 434 goto leave; 435 } 436 437 rc = USB_STOR_TRANSPORT_ERROR; 438 439 leave: 440 kfree(reply); 441 return rc; 442 } 443 444 445 static int datafab_handle_mode_sense(struct us_data *us, 446 struct scsi_cmnd * srb, 447 int sense_6) 448 { 449 static unsigned char rw_err_page[12] = { 450 0x1, 0xA, 0x21, 1, 0, 0, 0, 0, 1, 0, 0, 0 451 }; 452 static unsigned char cache_page[12] = { 453 0x8, 0xA, 0x1, 0, 0, 0, 0, 0, 0, 0, 0, 0 454 }; 455 static unsigned char rbac_page[12] = { 456 0x1B, 0xA, 0, 0x81, 0, 0, 0, 0, 0, 0, 0, 0 457 }; 458 static unsigned char timer_page[8] = { 459 0x1C, 0x6, 0, 0, 0, 0 460 }; 461 unsigned char pc, page_code; 462 unsigned int i = 0; 463 struct datafab_info *info = (struct datafab_info *) (us->extra); 464 unsigned char *ptr = us->iobuf; 465 466 // most of this stuff is just a hack to get things working. the 467 // datafab reader doesn't present a SCSI interface so we 468 // fudge the SCSI commands... 469 // 470 471 pc = srb->cmnd[2] >> 6; 472 page_code = srb->cmnd[2] & 0x3F; 473 474 switch (pc) { 475 case 0x0: 476 usb_stor_dbg(us, "Current values\n"); 477 break; 478 case 0x1: 479 usb_stor_dbg(us, "Changeable values\n"); 480 break; 481 case 0x2: 482 usb_stor_dbg(us, "Default values\n"); 483 break; 484 case 0x3: 485 usb_stor_dbg(us, "Saves values\n"); 486 break; 487 } 488 489 memset(ptr, 0, 8); 490 if (sense_6) { 491 ptr[2] = 0x00; // WP enable: 0x80 492 i = 4; 493 } else { 494 ptr[3] = 0x00; // WP enable: 0x80 495 i = 8; 496 } 497 498 switch (page_code) { 499 default: 500 // vendor-specific mode 501 info->sense_key = 0x05; 502 info->sense_asc = 0x24; 503 info->sense_ascq = 0x00; 504 return USB_STOR_TRANSPORT_FAILED; 505 506 case 0x1: 507 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); 508 i += sizeof(rw_err_page); 509 break; 510 511 case 0x8: 512 memcpy(ptr + i, cache_page, sizeof(cache_page)); 513 i += sizeof(cache_page); 514 break; 515 516 case 0x1B: 517 memcpy(ptr + i, rbac_page, sizeof(rbac_page)); 518 i += sizeof(rbac_page); 519 break; 520 521 case 0x1C: 522 memcpy(ptr + i, timer_page, sizeof(timer_page)); 523 i += sizeof(timer_page); 524 break; 525 526 case 0x3F: // retrieve all pages 527 memcpy(ptr + i, timer_page, sizeof(timer_page)); 528 i += sizeof(timer_page); 529 memcpy(ptr + i, rbac_page, sizeof(rbac_page)); 530 i += sizeof(rbac_page); 531 memcpy(ptr + i, cache_page, sizeof(cache_page)); 532 i += sizeof(cache_page); 533 memcpy(ptr + i, rw_err_page, sizeof(rw_err_page)); 534 i += sizeof(rw_err_page); 535 break; 536 } 537 538 if (sense_6) 539 ptr[0] = i - 1; 540 else 541 ((__be16 *) ptr)[0] = cpu_to_be16(i - 2); 542 usb_stor_set_xfer_buf(ptr, i, srb); 543 544 return USB_STOR_TRANSPORT_GOOD; 545 } 546 547 static void datafab_info_destructor(void *extra) 548 { 549 // this routine is a placeholder... 550 // currently, we don't allocate any extra memory so we're okay 551 } 552 553 554 // Transport for the Datafab MDCFE-B 555 // 556 static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) 557 { 558 struct datafab_info *info; 559 int rc; 560 unsigned long block, blocks; 561 unsigned char *ptr = us->iobuf; 562 static unsigned char inquiry_reply[8] = { 563 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00 564 }; 565 566 if (!us->extra) { 567 us->extra = kzalloc(sizeof(struct datafab_info), GFP_NOIO); 568 if (!us->extra) 569 return USB_STOR_TRANSPORT_ERROR; 570 571 us->extra_destructor = datafab_info_destructor; 572 ((struct datafab_info *)us->extra)->lun = -1; 573 } 574 575 info = (struct datafab_info *) (us->extra); 576 577 if (srb->cmnd[0] == INQUIRY) { 578 usb_stor_dbg(us, "INQUIRY - Returning bogus response\n"); 579 memcpy(ptr, inquiry_reply, sizeof(inquiry_reply)); 580 fill_inquiry_response(us, ptr, 36); 581 return USB_STOR_TRANSPORT_GOOD; 582 } 583 584 if (srb->cmnd[0] == READ_CAPACITY) { 585 info->ssize = 0x200; // hard coded 512 byte sectors as per ATA spec 586 rc = datafab_id_device(us, info); 587 if (rc != USB_STOR_TRANSPORT_GOOD) 588 return rc; 589 590 usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n", 591 info->sectors, info->ssize); 592 593 // build the reply 594 // we need the last sector, not the number of sectors 595 ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1); 596 ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize); 597 usb_stor_set_xfer_buf(ptr, 8, srb); 598 599 return USB_STOR_TRANSPORT_GOOD; 600 } 601 602 if (srb->cmnd[0] == MODE_SELECT_10) { 603 usb_stor_dbg(us, "Gah! MODE_SELECT_10\n"); 604 return USB_STOR_TRANSPORT_ERROR; 605 } 606 607 // don't bother implementing READ_6 or WRITE_6. 608 // 609 if (srb->cmnd[0] == READ_10) { 610 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 611 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 612 613 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); 614 615 usb_stor_dbg(us, "READ_10: read block 0x%04lx count %ld\n", 616 block, blocks); 617 return datafab_read_data(us, info, block, blocks); 618 } 619 620 if (srb->cmnd[0] == READ_12) { 621 // we'll probably never see a READ_12 but we'll do it anyway... 622 // 623 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 624 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 625 626 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | 627 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); 628 629 usb_stor_dbg(us, "READ_12: read block 0x%04lx count %ld\n", 630 block, blocks); 631 return datafab_read_data(us, info, block, blocks); 632 } 633 634 if (srb->cmnd[0] == WRITE_10) { 635 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 636 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 637 638 blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8])); 639 640 usb_stor_dbg(us, "WRITE_10: write block 0x%04lx count %ld\n", 641 block, blocks); 642 return datafab_write_data(us, info, block, blocks); 643 } 644 645 if (srb->cmnd[0] == WRITE_12) { 646 // we'll probably never see a WRITE_12 but we'll do it anyway... 647 // 648 block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) | 649 ((u32)(srb->cmnd[4]) << 8) | ((u32)(srb->cmnd[5])); 650 651 blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) | 652 ((u32)(srb->cmnd[8]) << 8) | ((u32)(srb->cmnd[9])); 653 654 usb_stor_dbg(us, "WRITE_12: write block 0x%04lx count %ld\n", 655 block, blocks); 656 return datafab_write_data(us, info, block, blocks); 657 } 658 659 if (srb->cmnd[0] == TEST_UNIT_READY) { 660 usb_stor_dbg(us, "TEST_UNIT_READY\n"); 661 return datafab_id_device(us, info); 662 } 663 664 if (srb->cmnd[0] == REQUEST_SENSE) { 665 usb_stor_dbg(us, "REQUEST_SENSE - Returning faked response\n"); 666 667 // this response is pretty bogus right now. eventually if necessary 668 // we can set the correct sense data. so far though it hasn't been 669 // necessary 670 // 671 memset(ptr, 0, 18); 672 ptr[0] = 0xF0; 673 ptr[2] = info->sense_key; 674 ptr[7] = 11; 675 ptr[12] = info->sense_asc; 676 ptr[13] = info->sense_ascq; 677 usb_stor_set_xfer_buf(ptr, 18, srb); 678 679 return USB_STOR_TRANSPORT_GOOD; 680 } 681 682 if (srb->cmnd[0] == MODE_SENSE) { 683 usb_stor_dbg(us, "MODE_SENSE_6 detected\n"); 684 return datafab_handle_mode_sense(us, srb, 1); 685 } 686 687 if (srb->cmnd[0] == MODE_SENSE_10) { 688 usb_stor_dbg(us, "MODE_SENSE_10 detected\n"); 689 return datafab_handle_mode_sense(us, srb, 0); 690 } 691 692 if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) { 693 // sure. whatever. not like we can stop the user from 694 // popping the media out of the device (no locking doors, etc) 695 // 696 return USB_STOR_TRANSPORT_GOOD; 697 } 698 699 if (srb->cmnd[0] == START_STOP) { 700 /* this is used by sd.c'check_scsidisk_media_change to detect 701 media change */ 702 usb_stor_dbg(us, "START_STOP\n"); 703 /* the first datafab_id_device after a media change returns 704 an error (determined experimentally) */ 705 rc = datafab_id_device(us, info); 706 if (rc == USB_STOR_TRANSPORT_GOOD) { 707 info->sense_key = NO_SENSE; 708 srb->result = SUCCESS; 709 } else { 710 info->sense_key = UNIT_ATTENTION; 711 srb->result = SAM_STAT_CHECK_CONDITION; 712 } 713 return rc; 714 } 715 716 usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n", 717 srb->cmnd[0], srb->cmnd[0]); 718 info->sense_key = 0x05; 719 info->sense_asc = 0x20; 720 info->sense_ascq = 0x00; 721 return USB_STOR_TRANSPORT_FAILED; 722 } 723 724 static int datafab_probe(struct usb_interface *intf, 725 const struct usb_device_id *id) 726 { 727 struct us_data *us; 728 int result; 729 730 result = usb_stor_probe1(&us, intf, id, 731 (id - datafab_usb_ids) + datafab_unusual_dev_list); 732 if (result) 733 return result; 734 735 us->transport_name = "Datafab Bulk-Only"; 736 us->transport = datafab_transport; 737 us->transport_reset = usb_stor_Bulk_reset; 738 us->max_lun = 1; 739 740 result = usb_stor_probe2(us); 741 return result; 742 } 743 744 static struct usb_driver datafab_driver = { 745 .name = "ums-datafab", 746 .probe = datafab_probe, 747 .disconnect = usb_stor_disconnect, 748 .suspend = usb_stor_suspend, 749 .resume = usb_stor_resume, 750 .reset_resume = usb_stor_reset_resume, 751 .pre_reset = usb_stor_pre_reset, 752 .post_reset = usb_stor_post_reset, 753 .id_table = datafab_usb_ids, 754 .soft_unbind = 1, 755 .no_dynamic_id = 1, 756 }; 757 758 module_usb_driver(datafab_driver); 759