xref: /linux/drivers/usb/host/Kconfig (revision 2193dda5eec60373c7a061c129c6ab9d658f78e9)
11da177e4SLinus Torvalds#
21da177e4SLinus Torvalds# USB Host Controller Drivers
31da177e4SLinus Torvalds#
41da177e4SLinus Torvaldscomment "USB Host Controller Drivers"
51da177e4SLinus Torvalds
6e9b29ffcSPeter Korsgaardconfig USB_C67X00_HCD
7e9b29ffcSPeter Korsgaard	tristate "Cypress C67x00 HCD support"
8e9b29ffcSPeter Korsgaard	help
9e9b29ffcSPeter Korsgaard	  The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
10e9b29ffcSPeter Korsgaard	  host/peripheral/OTG USB controllers.
11e9b29ffcSPeter Korsgaard
12e9b29ffcSPeter Korsgaard	  Enable this option to support this chip in host controller mode.
13e9b29ffcSPeter Korsgaard	  If unsure, say N.
14e9b29ffcSPeter Korsgaard
15e9b29ffcSPeter Korsgaard	  To compile this driver as a module, choose M here: the
16e9b29ffcSPeter Korsgaard	  module will be called c67x00.
17e9b29ffcSPeter Korsgaard
18eb6bab13SSarah Sharpconfig USB_XHCI_HCD
19eb83be98SGreg Kroah-Hartman	tristate "xHCI HCD (USB 3.0) support"
20eb6bab13SSarah Sharp	---help---
21eb6bab13SSarah Sharp	  The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
22eb6bab13SSarah Sharp	  "SuperSpeed" host controller hardware.
23eb6bab13SSarah Sharp
24eb6bab13SSarah Sharp	  To compile this driver as a module, choose M here: the
25eb6bab13SSarah Sharp	  module will be called xhci-hcd.
26eb6bab13SSarah Sharp
270fcb9989SFlorian Fainelliif USB_XHCI_HCD
280fcb9989SFlorian Fainelli
2929e409f0SAndrew Brestickerconfig USB_XHCI_PCI
3029e409f0SAndrew Bresticker       tristate
3129e409f0SAndrew Bresticker       depends on PCI
3229e409f0SAndrew Bresticker       default y
3329e409f0SAndrew Bresticker
343429e91aSSebastian Andrzej Siewiorconfig USB_XHCI_PLATFORM
353429e91aSSebastian Andrzej Siewior	tristate
363429e91aSSebastian Andrzej Siewior
3797374792SGregory CLEMENTconfig USB_XHCI_MVEBU
3897374792SGregory CLEMENT	tristate "xHCI support for Marvell Armada 375/38x"
3997374792SGregory CLEMENT	select USB_XHCI_PLATFORM
4097374792SGregory CLEMENT	depends on ARCH_MVEBU || COMPILE_TEST
4197374792SGregory CLEMENT	---help---
4297374792SGregory CLEMENT	  Say 'Y' to enable the support for the xHCI host controller
4397374792SGregory CLEMENT	  found in Marvell Armada 375/38x ARM SOCs.
4497374792SGregory CLEMENT
454ac8918fSYoshihiro Shimodaconfig USB_XHCI_RCAR
464ac8918fSYoshihiro Shimoda	tristate "xHCI support for Renesas R-Car SoCs"
474ac8918fSYoshihiro Shimoda	select USB_XHCI_PLATFORM
484ac8918fSYoshihiro Shimoda	depends on ARCH_SHMOBILE || COMPILE_TEST
494ac8918fSYoshihiro Shimoda	---help---
504ac8918fSYoshihiro Shimoda	  Say 'Y' to enable the support for the xHCI host controller
514ac8918fSYoshihiro Shimoda	  found in Renesas R-Car ARM SoCs.
524ac8918fSYoshihiro Shimoda
530fcb9989SFlorian Fainelliendif # USB_XHCI_HCD
540fcb9989SFlorian Fainelli
551da177e4SLinus Torvaldsconfig USB_EHCI_HCD
561da177e4SLinus Torvalds	tristate "EHCI HCD (USB 2.0) support"
571da177e4SLinus Torvalds	---help---
581da177e4SLinus Torvalds	  The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
591da177e4SLinus Torvalds	  "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
601da177e4SLinus Torvalds	  If your USB host controller supports USB 2.0, you will likely want to
61b967c88eSThierry Vignaud	  configure this Host Controller Driver.
621da177e4SLinus Torvalds
631da177e4SLinus Torvalds	  EHCI controllers are packaged with "companion" host controllers (OHCI
641da177e4SLinus Torvalds	  or UHCI) to handle USB 1.1 devices connected to root hub ports.  Ports
65b3c29d85SJesper Juhl	  will connect to EHCI if the device is high speed, otherwise they
661da177e4SLinus Torvalds	  connect to a companion controller.  If you configure EHCI, you should
671da177e4SLinus Torvalds	  probably configure the OHCI (for NEC and some other vendors) USB Host
681da177e4SLinus Torvalds	  Controller Driver or UHCI (for Via motherboards) Host Controller
691da177e4SLinus Torvalds	  Driver too.
701da177e4SLinus Torvalds
711da177e4SLinus Torvalds	  You may want to read <file:Documentation/usb/ehci.txt>.
721da177e4SLinus Torvalds
731da177e4SLinus Torvalds	  To compile this driver as a module, choose M here: the
741da177e4SLinus Torvalds	  module will be called ehci-hcd.
751da177e4SLinus Torvalds
761da177e4SLinus Torvaldsconfig USB_EHCI_ROOT_HUB_TT
779ec249a6SRobert P. J. Day	bool "Root Hub Transaction Translators"
78a746c286SPeter Chen	depends on USB_EHCI_HCD
791da177e4SLinus Torvalds	---help---
801da177e4SLinus Torvalds	  Some EHCI chips have vendor-specific extensions to integrate
811da177e4SLinus Torvalds	  transaction translators, so that no OHCI or UHCI companion
821da177e4SLinus Torvalds	  controller is needed.  It's safe to say "y" even if your
831da177e4SLinus Torvalds	  controller doesn't support this feature.
841da177e4SLinus Torvalds
85ba47f66bSDan Streetman	  This supports the EHCI implementation that's originally
86ba47f66bSDan Streetman	  from ARC, and has since changed hands a few times.
87ba47f66bSDan Streetman
88ba47f66bSDan Streetmanconfig USB_EHCI_TT_NEWSCHED
8937cd681cSAlan Stern	bool "Improved Transaction Translator scheduling"
90a746c286SPeter Chen	depends on USB_EHCI_HCD
9137cd681cSAlan Stern	default y
92ba47f66bSDan Streetman	---help---
93ba47f66bSDan Streetman	  This changes the periodic scheduling code to fill more of the low
94ba47f66bSDan Streetman	  and full speed bandwidth available from the Transaction Translator
95ba47f66bSDan Streetman	  (TT) in USB 2.0 hubs.  Without this, only one transfer will be
96ba47f66bSDan Streetman	  issued in each microframe, significantly reducing the number of
97ba47f66bSDan Streetman	  periodic low/fullspeed transfers possible.
98ba47f66bSDan Streetman
99ba47f66bSDan Streetman	  If you have multiple periodic low/fullspeed devices connected to a
100ba47f66bSDan Streetman	  highspeed USB hub which is connected to a highspeed USB Host
101ba47f66bSDan Streetman	  Controller, and some of those devices will not work correctly
10237cd681cSAlan Stern	  (possibly due to "ENOSPC" or "-28" errors), say Y.  Conversely, if
10337cd681cSAlan Stern	  you have only one such device and it doesn't work, you could try
10437cd681cSAlan Stern	  saying N.
105ba47f66bSDan Streetman
10637cd681cSAlan Stern	  If unsure, say Y.
1071da177e4SLinus Torvalds
10842443dc4SFlorian Fainelliconfig USB_FSL_MPH_DR_OF
10942443dc4SFlorian Fainelli	tristate
11042443dc4SFlorian Fainelli
11142443dc4SFlorian Fainelliif USB_EHCI_HCD
11242443dc4SFlorian Fainelli
113adfa79d1SAlan Sternconfig USB_EHCI_PCI
114adfa79d1SAlan Stern	tristate
11542443dc4SFlorian Fainelli	depends on PCI
116adfa79d1SAlan Stern	default y
117adfa79d1SAlan Stern
11822ced687SAnoopconfig USB_EHCI_HCD_PMC_MSP
11922ced687SAnoop	tristate "EHCI support for on-chip PMC MSP71xx USB controller"
12042443dc4SFlorian Fainelli	depends on MSP_HAS_USB
12122ced687SAnoop	default n
12222ced687SAnoop	select USB_EHCI_BIG_ENDIAN_DESC
12322ced687SAnoop	select USB_EHCI_BIG_ENDIAN_MMIO
12422ced687SAnoop	---help---
12522ced687SAnoop		Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
12622ced687SAnoop		If unsure, say N.
12722ced687SAnoop
12808d3c18eSJulie Zhuconfig XPS_USB_HCD_XILINX
12908d3c18eSJulie Zhu	bool "Use Xilinx usb host EHCI controller core"
13042443dc4SFlorian Fainelli	depends on (PPC32 || MICROBLAZE)
13108d3c18eSJulie Zhu	select USB_EHCI_BIG_ENDIAN_DESC
13208d3c18eSJulie Zhu	select USB_EHCI_BIG_ENDIAN_MMIO
13308d3c18eSJulie Zhu	---help---
134f54619f2SMasanari Iida		Xilinx xps USB host controller core is EHCI compliant and has
13508d3c18eSJulie Zhu		transaction translator built-in. It can be configured to either
13608d3c18eSJulie Zhu		support both high speed and full speed devices, or high speed
13708d3c18eSJulie Zhu		devices only.
13808d3c18eSJulie Zhu
139ba02978aSLi Yangconfig USB_EHCI_FSL
140c0ca9bc5SFabio Estevam	bool "Support for Freescale PPC on-chip EHCI USB controller"
14142443dc4SFlorian Fainelli	depends on FSL_SOC
142ba02978aSLi Yang	select USB_EHCI_ROOT_HUB_TT
143018b97d0SMarc Kleine-Budde	select USB_FSL_MPH_DR_OF if OF
144ba02978aSLi Yang	---help---
145ba02978aSLi Yang	  Variation of ARC USB block used in some Freescale chips.
146ba02978aSLi Yang
1477e8d5cd9SDaniel Mackconfig USB_EHCI_MXC
148dba63b2fSAlan Stern	tristate "Support for Freescale i.MX on-chip EHCI USB controller"
14942443dc4SFlorian Fainelli	depends on ARCH_MXC
1507e8d5cd9SDaniel Mack	select USB_EHCI_ROOT_HUB_TT
1517e8d5cd9SDaniel Mack	---help---
1527e8d5cd9SDaniel Mack	  Variation of ARC USB block used in some Freescale chips.
1537e8d5cd9SDaniel Mack
1547f124f4bSKeshava Munegowdaconfig USB_EHCI_HCD_OMAP
15554a41966SAlan Stern	tristate "EHCI support for OMAP3 and later chips"
15642443dc4SFlorian Fainelli	depends on ARCH_OMAP
15788650d62SRoger Quadros	select NOP_USB_XCEIV
1587f124f4bSKeshava Munegowda	default y
1597f124f4bSKeshava Munegowda	---help---
1607f124f4bSKeshava Munegowda	  Enables support for the on-chip EHCI controller on
1617f124f4bSKeshava Munegowda	  OMAP3 and later chips.
1627f124f4bSKeshava Munegowda
163a76dd463SManjunath Goudarconfig USB_EHCI_HCD_ORION
164a76dd463SManjunath Goudar	tristate  "Support for Marvell EBU on-chip EHCI USB controller"
165a76dd463SManjunath Goudar	depends on USB_EHCI_HCD && PLAT_ORION
166a76dd463SManjunath Goudar	default y
167a76dd463SManjunath Goudar	---help---
168a76dd463SManjunath Goudar	  Enables support for the on-chip EHCI controller on Marvell's
169a76dd463SManjunath Goudar	  embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
170a76dd463SManjunath Goudar	  Armada 370.  This is different from the EHCI implementation
171a76dd463SManjunath Goudar	  on Marvell's mobile PXA and MMP SoC, see "EHCI support for
172a76dd463SManjunath Goudar	  Marvell PXA/MMP USB controller" for those.
173a76dd463SManjunath Goudar
1747675d6baSManjunath Goudarconfig USB_EHCI_HCD_SPEAR
1757675d6baSManjunath Goudar        tristate "Support for ST SPEAr on-chip EHCI USB controller"
1767675d6baSManjunath Goudar        depends on USB_EHCI_HCD && PLAT_SPEAR
1777675d6baSManjunath Goudar        default y
1787675d6baSManjunath Goudar        ---help---
1797675d6baSManjunath Goudar          Enables support for the on-chip EHCI controller on
1807675d6baSManjunath Goudar          ST SPEAr chips.
1817675d6baSManjunath Goudar
182905e300eSArnd Bergmannconfig USB_EHCI_HCD_STI
183905e300eSArnd Bergmann	tristate "Support for ST STiHxxx on-chip EHCI USB controller"
184905e300eSArnd Bergmann	depends on ARCH_STI && OF
185905e300eSArnd Bergmann	select GENERIC_PHY
186905e300eSArnd Bergmann	select USB_EHCI_HCD_PLATFORM
187905e300eSArnd Bergmann	help
188905e300eSArnd Bergmann	  Enable support for the on-chip EHCI controller found on
189905e300eSArnd Bergmann	  STMicroelectronics consumer electronics SoC's.
190905e300eSArnd Bergmann
19197736961SManjunath Goudarconfig USB_EHCI_HCD_AT91
19297736961SManjunath Goudar        tristate  "Support for Atmel on-chip EHCI USB controller"
19397736961SManjunath Goudar        depends on USB_EHCI_HCD && ARCH_AT91
19497736961SManjunath Goudar        default y
19597736961SManjunath Goudar        ---help---
19697736961SManjunath Goudar          Enables support for the on-chip EHCI controller on
19797736961SManjunath Goudar          Atmel chips.
19897736961SManjunath Goudar
199b0848aeaSPavankumar Kondeticonfig USB_EHCI_MSM
2008c68e84fSManjunath Goudar	tristate "Support for Qualcomm QSD/MSM on-chip EHCI USB controller"
2018ae587e5SSrinivas Kandagatla	depends on ARCH_MSM || ARCH_QCOM
202b0848aeaSPavankumar Kondeti	select USB_EHCI_ROOT_HUB_TT
203b0848aeaSPavankumar Kondeti	---help---
204b0848aeaSPavankumar Kondeti	  Enables support for the USB Host controller present on the
205b0848aeaSPavankumar Kondeti	  Qualcomm chipsets. Root Hub has inbuilt TT.
206b0848aeaSPavankumar Kondeti	  This driver depends on OTG driver for PHY initialization,
2078bb6a164SPavankumar Kondeti	  clock management, powering up VBUS, and power management.
2088cf28f1fSPavankumar Kondeti	  This driver is not supported on boards like trout which
2098cf28f1fSPavankumar Kondeti	  has an external PHY.
210b0848aeaSPavankumar Kondeti
21179ad3b5aSBenoit Gobyconfig USB_EHCI_TEGRA
2129fc5f24eSManjunath Goudar       tristate "NVIDIA Tegra HCD support"
21342443dc4SFlorian Fainelli       depends on ARCH_TEGRA
21479ad3b5aSBenoit Goby       select USB_EHCI_ROOT_HUB_TT
21575f32ec1SFelipe Balbi       select USB_PHY
21679ad3b5aSBenoit Goby       help
21779ad3b5aSBenoit Goby         This driver enables support for the internal USB Host Controllers
21879ad3b5aSBenoit Goby         found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
21979ad3b5aSBenoit Goby
220da0e8fb0SValentine Barshakconfig USB_EHCI_HCD_PPC_OF
221da0e8fb0SValentine Barshak	bool "EHCI support for PPC USB controller on OF platform bus"
22242443dc4SFlorian Fainelli	depends on PPC_OF
223da0e8fb0SValentine Barshak	default y
224da0e8fb0SValentine Barshak	---help---
225da0e8fb0SValentine Barshak	  Enables support for the USB controller present on the PowerPC
226da0e8fb0SValentine Barshak	  OpenFirmware platform bus.
227da0e8fb0SValentine Barshak
22860b0bf0fSYoshihiro Shimodaconfig USB_EHCI_SH
22960b0bf0fSYoshihiro Shimoda	bool "EHCI support for SuperH USB controller"
23042443dc4SFlorian Fainelli	depends on SUPERH
23160b0bf0fSYoshihiro Shimoda	---help---
23260b0bf0fSYoshihiro Shimoda	  Enables support for the on-chip EHCI controller on the SuperH.
23360b0bf0fSYoshihiro Shimoda	  If you use the PCI EHCI controller, this option is not necessary.
23460b0bf0fSYoshihiro Shimoda
23529824c16SJingoo Hanconfig USB_EHCI_EXYNOS
2367edb3dafSManjunath Goudar       tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
237cd6e245aSSylwester Nawrocki       depends on ARCH_S5PV210 || ARCH_EXYNOS
2381bcc5aa8SJoonyoung Shim       help
23929824c16SJingoo Han	Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
2401bcc5aa8SJoonyoung Shim
2413a082ec9SNeil Zhangconfig USB_EHCI_MV
242a76dd463SManjunath Goudar	bool "EHCI support for Marvell PXA/MMP USB controller"
24342443dc4SFlorian Fainelli	depends on (ARCH_PXA || ARCH_MMP)
2443a082ec9SNeil Zhang	select USB_EHCI_ROOT_HUB_TT
2453a082ec9SNeil Zhang	---help---
2463a082ec9SNeil Zhang	  Enables support for Marvell (including PXA and MMP series) on-chip
2473a082ec9SNeil Zhang	  USB SPH and OTG controller. SPH is a single port host, and it can
2483a082ec9SNeil Zhang	  only be EHCI host. OTG is controller that can switch to host mode.
249a76dd463SManjunath Goudar	  Note that this driver will not work on Marvell's other EHCI
250a76dd463SManjunath Goudar	  controller used by the EBU-type SoCs including Orion, Kirkwood,
251a76dd463SManjunath Goudar	  Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
252a76dd463SManjunath Goudar	  on-chip EHCI USB controller" for those.
2533a082ec9SNeil Zhang
254586dfc8cSWan ZongShunconfig USB_W90X900_EHCI
255a60f4f81SManjunath Goudar	tristate "W90X900(W90P910) EHCI support"
25642443dc4SFlorian Fainelli	depends on ARCH_W90X900
257586dfc8cSWan ZongShun	---help---
258586dfc8cSWan ZongShun		Enables support for the W90X900 USB controller
259586dfc8cSWan ZongShun
260760efe69SMac Linconfig USB_CNS3XXX_EHCI
261f3a958d3SFlorian Fainelli	bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
26242443dc4SFlorian Fainelli	depends on ARCH_CNS3XXX
263f3a958d3SFlorian Fainelli	select USB_EHCI_HCD_PLATFORM
264760efe69SMac Lin	---help---
265f3a958d3SFlorian Fainelli	  This option is deprecated now and the driver was removed, use
266f3a958d3SFlorian Fainelli	  USB_EHCI_HCD_PLATFORM instead.
267f3a958d3SFlorian Fainelli
268760efe69SMac Lin	  Enable support for the CNS3XXX SOC's on-chip EHCI controller.
269760efe69SMac Lin	  It is needed for high-speed (480Mbit/sec) USB 2.0 device
270760efe69SMac Lin	  support.
271760efe69SMac Lin
272502fa841SGabor Juhosconfig USB_EHCI_ATH79
2735d98cd4eSHauke Mehrtens	bool "EHCI support for AR7XXX/AR9XXX SoCs (DEPRECATED)"
27442443dc4SFlorian Fainelli	depends on (SOC_AR71XX || SOC_AR724X || SOC_AR913X || SOC_AR933X)
275502fa841SGabor Juhos	select USB_EHCI_ROOT_HUB_TT
2765d98cd4eSHauke Mehrtens	select USB_EHCI_HCD_PLATFORM
277502fa841SGabor Juhos	default y
278502fa841SGabor Juhos	---help---
2795d98cd4eSHauke Mehrtens	  This option is deprecated now and the driver was removed, use
2805d98cd4eSHauke Mehrtens	  USB_EHCI_HCD_PLATFORM instead.
2815d98cd4eSHauke Mehrtens
282502fa841SGabor Juhos	  Enables support for the built-in EHCI controller present
283502fa841SGabor Juhos	  on the Atheros AR7XXX/AR9XXX SoCs.
284502fa841SGabor Juhos
28542443dc4SFlorian Fainelliconfig USB_EHCI_HCD_PLATFORM
28642443dc4SFlorian Fainelli	tristate "Generic EHCI driver for a platform device"
28742443dc4SFlorian Fainelli	default n
28842443dc4SFlorian Fainelli	---help---
28942443dc4SFlorian Fainelli	  Adds an EHCI host driver for a generic platform device, which
29042443dc4SFlorian Fainelli	  provides a memory space and an irq.
29142443dc4SFlorian Fainelli
29242443dc4SFlorian Fainelli	  If unsure, say N.
29342443dc4SFlorian Fainelli
29442443dc4SFlorian Fainelliconfig USB_OCTEON_EHCI
295*2193dda5SAlan Stern	bool "Octeon on-chip EHCI support (DEPRECATED)"
2969ddebc46SDavid Daney	depends on CAVIUM_OCTEON_SOC
29742443dc4SFlorian Fainelli	default n
29842443dc4SFlorian Fainelli	select USB_EHCI_BIG_ENDIAN_MMIO
299*2193dda5SAlan Stern	select USB_EHCI_HCD_PLATFORM
30042443dc4SFlorian Fainelli	help
301*2193dda5SAlan Stern	  This option is deprecated now and the driver was removed, use
302*2193dda5SAlan Stern	  USB_EHCI_HCD_PLATFORM instead.
303*2193dda5SAlan Stern
30442443dc4SFlorian Fainelli	  Enable support for the Octeon II SOC's on-chip EHCI
30542443dc4SFlorian Fainelli	  controller.  It is needed for high-speed (480Mbit/sec)
30642443dc4SFlorian Fainelli	  USB 2.0 device support.  All CN6XXX based chips with USB are
30742443dc4SFlorian Fainelli	  supported.
30842443dc4SFlorian Fainelli
30942443dc4SFlorian Fainelliendif # USB_EHCI_HCD
31042443dc4SFlorian Fainelli
311b92a78e5SRodolfo Giometticonfig USB_OXU210HP_HCD
312b92a78e5SRodolfo Giometti	tristate "OXU210HP HCD support"
313b92a78e5SRodolfo Giometti	---help---
314b92a78e5SRodolfo Giometti	  The OXU210HP is an USB host/OTG/device controller. Enable this
315b92a78e5SRodolfo Giometti	  option if your board has this chip. If unsure, say N.
316b92a78e5SRodolfo Giometti
317b92a78e5SRodolfo Giometti	  This driver does not support isochronous transfers and doesn't
318b92a78e5SRodolfo Giometti	  implement OTG nor USB device controllers.
319b92a78e5SRodolfo Giometti
320b92a78e5SRodolfo Giometti	  To compile this driver as a module, choose M here: the
321b92a78e5SRodolfo Giometti	  module will be called oxu210hp-hcd.
322b92a78e5SRodolfo Giometti
3234808a1c0SOlav Kongasconfig USB_ISP116X_HCD
3244808a1c0SOlav Kongas	tristate "ISP116X HCD support"
3254808a1c0SOlav Kongas	---help---
3264808a1c0SOlav Kongas	  The ISP1160 and ISP1161 chips are USB host controllers. Enable this
3274808a1c0SOlav Kongas	  option if your board has this chip. If unsure, say N.
3284808a1c0SOlav Kongas
3294808a1c0SOlav Kongas	  This driver does not support isochronous transfers.
3304808a1c0SOlav Kongas
3314808a1c0SOlav Kongas	  To compile this driver as a module, choose M here: the
3324808a1c0SOlav Kongas	  module will be called isp116x-hcd.
3334808a1c0SOlav Kongas
334db11e47dSSebastian Siewiorconfig USB_ISP1760_HCD
335db11e47dSSebastian Siewior	tristate "ISP 1760 HCD support"
336db11e47dSSebastian Siewior	---help---
337db11e47dSSebastian Siewior	  The ISP1760 chip is a USB 2.0 host controller.
338db11e47dSSebastian Siewior
339db11e47dSSebastian Siewior	  This driver does not support isochronous transfers or OTG.
340ff30bf1cSSebastian Andrzej Siewior	  This USB controller is usually attached to a non-DMA-Master
341ff30bf1cSSebastian Andrzej Siewior	  capable bus. NXP's eval kit brings this chip on PCI card
342ff30bf1cSSebastian Andrzej Siewior	  where the chip itself is behind a PLB to simulate such
343ff30bf1cSSebastian Andrzej Siewior	  a bus.
344db11e47dSSebastian Siewior
345db11e47dSSebastian Siewior	  To compile this driver as a module, choose M here: the
346ff30bf1cSSebastian Andrzej Siewior	  module will be called isp1760.
347db11e47dSSebastian Siewior
348a9d43091SLothar Wassmannconfig USB_ISP1362_HCD
349a9d43091SLothar Wassmann	tristate "ISP1362 HCD support"
350a9d43091SLothar Wassmann	---help---
351a9d43091SLothar Wassmann	  Supports the Philips ISP1362 chip as a host controller
352a9d43091SLothar Wassmann
353a9d43091SLothar Wassmann	  This driver does not support isochronous transfers.
354a9d43091SLothar Wassmann
355a9d43091SLothar Wassmann	  To compile this driver as a module, choose M here: the
356a9d43091SLothar Wassmann	  module will be called isp1362-hcd.
357a9d43091SLothar Wassmann
3586c920bfbSYuan-Hsin Chenconfig USB_FUSBH200_HCD
3596c920bfbSYuan-Hsin Chen	tristate "FUSBH200 HCD support"
3606c920bfbSYuan-Hsin Chen	depends on USB
3616c920bfbSYuan-Hsin Chen	---help---
3626c920bfbSYuan-Hsin Chen	Faraday FUSBH200 is designed to meet USB2.0 EHCI specification
3636c920bfbSYuan-Hsin Chen	with minor modification.
3646c920bfbSYuan-Hsin Chen
3656c920bfbSYuan-Hsin Chen	To compile this driver as a module, choose M here: the
3666c920bfbSYuan-Hsin Chen	module will be called fusbh200-hcd.
3676c920bfbSYuan-Hsin Chen
3687d50195fSFeng-Hsin Chiangconfig USB_FOTG210_HCD
3697d50195fSFeng-Hsin Chiang	tristate "FOTG210 HCD support"
3707d50195fSFeng-Hsin Chiang	depends on USB
3717d50195fSFeng-Hsin Chiang	---help---
3727d50195fSFeng-Hsin Chiang	  Faraday FOTG210 is an OTG controller which can be configured as
3737d50195fSFeng-Hsin Chiang	  an USB2.0 host. It is designed to meet USB2.0 EHCI specification
3747d50195fSFeng-Hsin Chiang	  with minor modification.
3757d50195fSFeng-Hsin Chiang
3767d50195fSFeng-Hsin Chiang	  To compile this driver as a module, choose M here: the
3777d50195fSFeng-Hsin Chiang	  module will be called fotg210-hcd.
3787d50195fSFeng-Hsin Chiang
3792d53139fSDavid Mosbergerconfig USB_MAX3421_HCD
3802d53139fSDavid Mosberger	tristate "MAX3421 HCD (USB-over-SPI) support"
3812d53139fSDavid Mosberger	depends on USB && SPI
3822d53139fSDavid Mosberger	---help---
3832d53139fSDavid Mosberger	  The Maxim MAX3421E chip supports standard USB 2.0-compliant
3842d53139fSDavid Mosberger	  full-speed devices either in host or peripheral mode.  This
3852d53139fSDavid Mosberger	  driver supports the host-mode of the MAX3421E only.
3862d53139fSDavid Mosberger
3872d53139fSDavid Mosberger	  To compile this driver as a module, choose M here: the module will
3882d53139fSDavid Mosberger	  be called max3421-hcd.
3892d53139fSDavid Mosberger
3901da177e4SLinus Torvaldsconfig USB_OHCI_HCD
391c1117afbSManjunath Goudar	tristate "OHCI HCD (USB 1.1) support"
3921da177e4SLinus Torvalds	---help---
3931da177e4SLinus Torvalds	  The Open Host Controller Interface (OHCI) is a standard for accessing
3941da177e4SLinus Torvalds	  USB 1.1 host controller hardware.  It does more in hardware than Intel's
3951da177e4SLinus Torvalds	  UHCI specification.  If your USB host controller follows the OHCI spec,
3961da177e4SLinus Torvalds	  say Y.  On most non-x86 systems, and on x86 hardware that's not using a
3971da177e4SLinus Torvalds	  USB controller from Intel or VIA, this is appropriate.  If your host
3981da177e4SLinus Torvalds	  controller doesn't use PCI, this is probably appropriate.  For a PCI
3991da177e4SLinus Torvalds	  based system where you're not sure, the "lspci -v" entry will list the
4001da177e4SLinus Torvalds	  right "prog-if" for your USB controller(s):  EHCI, OHCI, or UHCI.
4011da177e4SLinus Torvalds
4021da177e4SLinus Torvalds	  To compile this driver as a module, choose M here: the
4031da177e4SLinus Torvalds	  module will be called ohci-hcd.
4041da177e4SLinus Torvalds
4053ad3ca05SFlorian Fainelliif USB_OHCI_HCD
4063ad3ca05SFlorian Fainelli
407968b448bSAnand Gadiyarconfig USB_OHCI_HCD_OMAP1
408de57a154SManjunath Goudar	tristate "OHCI support for OMAP1/2 chips"
4093ad3ca05SFlorian Fainelli	depends on ARCH_OMAP1
41038e0c109SArnd Bergmann	depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
411968b448bSAnand Gadiyar	default y
412968b448bSAnand Gadiyar	---help---
413968b448bSAnand Gadiyar	  Enables support for the OHCI controller on OMAP1/2 chips.
414968b448bSAnand Gadiyar
4151cc6ac59SManjunath Goudarconfig USB_OHCI_HCD_SPEAR
4161cc6ac59SManjunath Goudar        tristate "Support for ST SPEAr on-chip OHCI USB controller"
4171cc6ac59SManjunath Goudar        depends on USB_OHCI_HCD && PLAT_SPEAR
4181cc6ac59SManjunath Goudar        default y
4191cc6ac59SManjunath Goudar        ---help---
4201cc6ac59SManjunath Goudar          Enables support for the on-chip OHCI controller on
4211cc6ac59SManjunath Goudar          ST SPEAr chips.
4221cc6ac59SManjunath Goudar
423905e300eSArnd Bergmannconfig USB_OHCI_HCD_STI
424905e300eSArnd Bergmann	tristate "Support for ST STiHxxx on-chip OHCI USB controller"
425905e300eSArnd Bergmann	depends on ARCH_STI && OF
426905e300eSArnd Bergmann	select GENERIC_PHY
427905e300eSArnd Bergmann	select USB_OHCI_HCD_PLATFORM
428905e300eSArnd Bergmann	help
429905e300eSArnd Bergmann	  Enable support for the on-chip OHCI controller found on
430905e300eSArnd Bergmann	  STMicroelectronics consumer electronics SoC's.
431905e300eSArnd Bergmann
432f23b71f3SManjunath Goudarconfig USB_OHCI_HCD_S3C2410
433f23b71f3SManjunath Goudar        tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
434f23b71f3SManjunath Goudar        depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
435f23b71f3SManjunath Goudar        default y
436f23b71f3SManjunath Goudar        ---help---
437f23b71f3SManjunath Goudar          Enables support for the on-chip OHCI controller on
438f23b71f3SManjunath Goudar          S3C24xx/S3C64xx chips.
439f23b71f3SManjunath Goudar
44030330b8fSManjunath Goudarconfig USB_OHCI_HCD_LPC32XX
44130330b8fSManjunath Goudar	tristate "Support for LPC on-chip OHCI USB controller"
44230330b8fSManjunath Goudar	depends on USB_OHCI_HCD && ARCH_LPC32XX
44338e0c109SArnd Bergmann	depends on USB_ISP1301
44430330b8fSManjunath Goudar	default y
44530330b8fSManjunath Goudar	---help---
44630330b8fSManjunath Goudar          Enables support for the on-chip OHCI controller on
44730330b8fSManjunath Goudar          NXP chips.
44830330b8fSManjunath Goudar
449b8ad5c37SManjunath Goudarconfig USB_OHCI_HCD_PXA27X
450b8ad5c37SManjunath Goudar	tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
451b8ad5c37SManjunath Goudar	depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
452b8ad5c37SManjunath Goudar	default y
453b8ad5c37SManjunath Goudar	---help---
454b8ad5c37SManjunath Goudar	  Enables support for the on-chip OHCI controller on
455b8ad5c37SManjunath Goudar	  PXA27x/PXA3xx chips.
456b8ad5c37SManjunath Goudar
457e3825b48SManjunath Goudarconfig USB_OHCI_HCD_AT91
458e3825b48SManjunath Goudar        tristate "Support for Atmel on-chip OHCI USB controller"
459e3825b48SManjunath Goudar        depends on USB_OHCI_HCD && ARCH_AT91
460e3825b48SManjunath Goudar        default y
461e3825b48SManjunath Goudar        ---help---
462e3825b48SManjunath Goudar          Enables support for the on-chip OHCI controller on
463e3825b48SManjunath Goudar          Atmel chips.
464e3825b48SManjunath Goudar
465968b448bSAnand Gadiyarconfig USB_OHCI_HCD_OMAP3
4663a48fef1SManjunath Goudar	tristate "OHCI support for OMAP3 and later chips"
4673ad3ca05SFlorian Fainelli	depends on (ARCH_OMAP3 || ARCH_OMAP4)
468968b448bSAnand Gadiyar	default y
469968b448bSAnand Gadiyar	---help---
470968b448bSAnand Gadiyar	  Enables support for the on-chip OHCI controller on
471968b448bSAnand Gadiyar	  OMAP3 and later chips.
472968b448bSAnand Gadiyar
473068413e9SArnd Bergmannconfig USB_OHCI_HCD_DAVINCI
474068413e9SArnd Bergmann	bool "OHCI support for TI DaVinci DA8xx"
475068413e9SArnd Bergmann	depends on ARCH_DAVINCI_DA8XX
476068413e9SArnd Bergmann	depends on USB_OHCI_HCD=y
477068413e9SArnd Bergmann	default y
478068413e9SArnd Bergmann	help
479068413e9SArnd Bergmann	  Enables support for the DaVinci DA8xx integrated OHCI
480068413e9SArnd Bergmann	  controller. This driver cannot currently be a loadable
481068413e9SArnd Bergmann	  module because it lacks a proper PHY abstraction.
482068413e9SArnd Bergmann
48390e6ca5cSGabor Juhosconfig USB_OHCI_ATH79
4845d98cd4eSHauke Mehrtens	bool "USB OHCI support for the Atheros AR71XX/AR7240 SoCs (DEPRECATED)"
4853ad3ca05SFlorian Fainelli	depends on (SOC_AR71XX || SOC_AR724X)
4865d98cd4eSHauke Mehrtens	select USB_OHCI_HCD_PLATFORM
48790e6ca5cSGabor Juhos	default y
48890e6ca5cSGabor Juhos	help
4895d98cd4eSHauke Mehrtens	  This option is deprecated now and the driver was removed, use
4905d98cd4eSHauke Mehrtens	  USB_OHCI_HCD_PLATFORM instead.
4915d98cd4eSHauke Mehrtens
49290e6ca5cSGabor Juhos	  Enables support for the built-in OHCI controller present on the
49390e6ca5cSGabor Juhos	  Atheros AR71XX/AR7240 SoCs.
49490e6ca5cSGabor Juhos
495495a678fSSylvain Munautconfig USB_OHCI_HCD_PPC_OF_BE
49645e83889SArnd Bergmann	bool "OHCI support for OF platform bus (big endian)"
4973ad3ca05SFlorian Fainelli	depends on PPC_OF
498495a678fSSylvain Munaut	select USB_OHCI_BIG_ENDIAN_DESC
499495a678fSSylvain Munaut	select USB_OHCI_BIG_ENDIAN_MMIO
50045e83889SArnd Bergmann	---help---
50145e83889SArnd Bergmann	  Enables support for big-endian USB controllers present on the
50245e83889SArnd Bergmann	  OpenFirmware platform bus.
503495a678fSSylvain Munaut
504495a678fSSylvain Munautconfig USB_OHCI_HCD_PPC_OF_LE
50545e83889SArnd Bergmann	bool "OHCI support for OF platform bus (little endian)"
5063ad3ca05SFlorian Fainelli	depends on PPC_OF
507495a678fSSylvain Munaut	select USB_OHCI_LITTLE_ENDIAN
50845e83889SArnd Bergmann	---help---
50945e83889SArnd Bergmann	  Enables support for little-endian USB controllers present on the
51045e83889SArnd Bergmann	  OpenFirmware platform bus.
51145e83889SArnd Bergmann
51245e83889SArnd Bergmannconfig USB_OHCI_HCD_PPC_OF
51345e83889SArnd Bergmann	bool
5143ad3ca05SFlorian Fainelli	depends on PPC_OF
51545e83889SArnd Bergmann	default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
516495a678fSSylvain Munaut
5171da177e4SLinus Torvaldsconfig USB_OHCI_HCD_PCI
518c1117afbSManjunath Goudar	tristate "OHCI support for PCI-bus USB controllers"
519c1117afbSManjunath Goudar	depends on PCI
5201da177e4SLinus Torvalds	default y
5211da177e4SLinus Torvalds	select USB_OHCI_LITTLE_ENDIAN
5221da177e4SLinus Torvalds	---help---
5231da177e4SLinus Torvalds	  Enables support for PCI-bus plug-in USB controller cards.
5241da177e4SLinus Torvalds	  If unsure, say Y.
5251da177e4SLinus Torvalds
526c604e851SMichael Bueschconfig USB_OHCI_HCD_SSB
527259b83a3SHauke Mehrtens	bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
5283ad3ca05SFlorian Fainelli	depends on (SSB = y || SSB = USB_OHCI_HCD)
529259b83a3SHauke Mehrtens	select USB_HCD_SSB
530259b83a3SHauke Mehrtens	select USB_OHCI_HCD_PLATFORM
531c604e851SMichael Buesch	default n
532c604e851SMichael Buesch	---help---
533259b83a3SHauke Mehrtens	  This option is deprecated now and the driver was removed, use
534259b83a3SHauke Mehrtens	  USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
535259b83a3SHauke Mehrtens
536c604e851SMichael Buesch	  Support for the Sonics Silicon Backplane (SSB) attached
537c604e851SMichael Buesch	  Broadcom USB OHCI core.
538c604e851SMichael Buesch
539c604e851SMichael Buesch	  This device is present in some embedded devices with
540c604e851SMichael Buesch	  Broadcom based SSB bus.
541c604e851SMichael Buesch
542c604e851SMichael Buesch	  If unsure, say N.
543c604e851SMichael Buesch
54460b0bf0fSYoshihiro Shimodaconfig USB_OHCI_SH
545231a72e0SFlorian Fainelli	bool "OHCI support for SuperH USB controller (DEPRECATED)"
5463ad3ca05SFlorian Fainelli	depends on SUPERH
547231a72e0SFlorian Fainelli	select USB_OHCI_HCD_PLATFORM
54860b0bf0fSYoshihiro Shimoda	---help---
549231a72e0SFlorian Fainelli	  This option is deprecated now and the driver was removed, use
550231a72e0SFlorian Fainelli	  USB_OHCI_HCD_PLATFORM instead.
551231a72e0SFlorian Fainelli
55260b0bf0fSYoshihiro Shimoda	  Enables support for the on-chip OHCI controller on the SuperH.
55360b0bf0fSYoshihiro Shimoda	  If you use the PCI OHCI controller, this option is not necessary.
55460b0bf0fSYoshihiro Shimoda
55562194244SJingoo Hanconfig USB_OHCI_EXYNOS
55650a97e05SManjunath Goudar	tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
557cd6e245aSSylwester Nawrocki	depends on ARCH_S5PV210 || ARCH_EXYNOS
55862194244SJingoo Han	help
55962194244SJingoo Han	 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
56062194244SJingoo Han
561760efe69SMac Linconfig USB_CNS3XXX_OHCI
562c23920b0SFlorian Fainelli	bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
5633ad3ca05SFlorian Fainelli	depends on ARCH_CNS3XXX
564c23920b0SFlorian Fainelli	select USB_OHCI_HCD_PLATFORM
565760efe69SMac Lin	---help---
566c23920b0SFlorian Fainelli	  This option is deprecated now and the driver was removed, use
567c23920b0SFlorian Fainelli	  USB_OHCI_HCD_PLATFORM instead.
568c23920b0SFlorian Fainelli
569760efe69SMac Lin	  Enable support for the CNS3XXX SOC's on-chip OHCI controller.
570760efe69SMac Lin	  It is needed for low-speed USB 1.0 device support.
571760efe69SMac Lin
572fa3364b5SHauke Mehrtensconfig USB_OHCI_HCD_PLATFORM
573928fb68eSManjunath Goudar	tristate "Generic OHCI driver for a platform device"
574fa3364b5SHauke Mehrtens	default n
575fa3364b5SHauke Mehrtens	---help---
576fa3364b5SHauke Mehrtens	  Adds an OHCI host driver for a generic platform device, which
577898d828bSPeter Meerwald	  provides a memory space and an irq.
578fa3364b5SHauke Mehrtens
579fa3364b5SHauke Mehrtens	  If unsure, say N.
580fa3364b5SHauke Mehrtens
5813ad3ca05SFlorian Fainelliconfig USB_OCTEON_OHCI
582*2193dda5SAlan Stern	bool "Octeon on-chip OHCI support (DEPRECATED)"
5839ddebc46SDavid Daney	depends on CAVIUM_OCTEON_SOC
5843ad3ca05SFlorian Fainelli	default USB_OCTEON_EHCI
5853ad3ca05SFlorian Fainelli	select USB_OHCI_BIG_ENDIAN_MMIO
5863ad3ca05SFlorian Fainelli	select USB_OHCI_LITTLE_ENDIAN
587*2193dda5SAlan Stern	select USB_OHCI_HCD_PLATFORM
5883ad3ca05SFlorian Fainelli	help
589*2193dda5SAlan Stern	  This option is deprecated now and the driver was removed, use
590*2193dda5SAlan Stern	  USB_OHCI_HCD_PLATFORM instead.
591*2193dda5SAlan Stern
5923ad3ca05SFlorian Fainelli	  Enable support for the Octeon II SOC's on-chip OHCI
5933ad3ca05SFlorian Fainelli	  controller.  It is needed for low-speed USB 1.0 device
5943ad3ca05SFlorian Fainelli	  support.  All CN6XXX based chips with USB are supported.
5953ad3ca05SFlorian Fainelli
5963ad3ca05SFlorian Fainelliendif # USB_OHCI_HCD
5973ad3ca05SFlorian Fainelli
5981da177e4SLinus Torvaldsconfig USB_UHCI_HCD
5991da177e4SLinus Torvalds	tristate "UHCI HCD (most Intel and VIA) support"
600ccd9509aSAlan Stern	depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
6011da177e4SLinus Torvalds	---help---
6021da177e4SLinus Torvalds	  The Universal Host Controller Interface is a standard by Intel for
6031da177e4SLinus Torvalds	  accessing the USB hardware in the PC (which is also called the USB
6041da177e4SLinus Torvalds	  host controller). If your USB host controller conforms to this
6051da177e4SLinus Torvalds	  standard, you may want to say Y, but see below. All recent boards
6061da177e4SLinus Torvalds	  with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
6071da177e4SLinus Torvalds	  i810, i820) conform to this standard. Also all VIA PCI chipsets
6081da177e4SLinus Torvalds	  (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
6093db7739cSJan Andersson	  133) and LEON/GRLIB SoCs with the GRUSBHC controller.
6103db7739cSJan Andersson	  If unsure, say Y.
6111da177e4SLinus Torvalds
6121da177e4SLinus Torvalds	  To compile this driver as a module, choose M here: the
6131da177e4SLinus Torvalds	  module will be called uhci-hcd.
6141da177e4SLinus Torvalds
615d3219d1cSJan Anderssonconfig USB_UHCI_SUPPORT_NON_PCI_HC
616d3219d1cSJan Andersson	bool
617ccd9509aSAlan Stern	default y if (SPARC_LEON || USB_UHCI_PLATFORM)
618100d4597STony Prisk
619100d4597STony Priskconfig USB_UHCI_PLATFORM
620ccd9509aSAlan Stern	bool
621100d4597STony Prisk	default y if ARCH_VT8500
622d3219d1cSJan Andersson
6238452c674SJan Anderssonconfig USB_UHCI_BIG_ENDIAN_MMIO
6248452c674SJan Andersson	bool
625ccd9509aSAlan Stern	default y if SPARC_LEON
6268452c674SJan Andersson
62751e2f62fSJan Anderssonconfig USB_UHCI_BIG_ENDIAN_DESC
62851e2f62fSJan Andersson	bool
629ccd9509aSAlan Stern	default y if SPARC_LEON
63051e2f62fSJan Andersson
631236dd4d1SAnton Vorontsovconfig USB_FHCI_HCD
632236dd4d1SAnton Vorontsov	tristate "Freescale QE USB Host Controller support"
63325e11ec4SFlorian Fainelli	depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
634236dd4d1SAnton Vorontsov	select FSL_GTM
635236dd4d1SAnton Vorontsov	select QE_USB
636236dd4d1SAnton Vorontsov	help
637236dd4d1SAnton Vorontsov	  This driver enables support for Freescale QE USB Host Controller
638236dd4d1SAnton Vorontsov	  (as found on MPC8360 and MPC8323 processors), the driver supports
639236dd4d1SAnton Vorontsov	  Full and Low Speed USB.
640236dd4d1SAnton Vorontsov
641236dd4d1SAnton Vorontsovconfig FHCI_DEBUG
642236dd4d1SAnton Vorontsov	bool "Freescale QE USB Host Controller debug support"
643236dd4d1SAnton Vorontsov	depends on USB_FHCI_HCD && DEBUG_FS
644236dd4d1SAnton Vorontsov	help
645236dd4d1SAnton Vorontsov	  Say "y" to see some FHCI debug information and statistics
64625985edcSLucas De Marchi	  through debugfs.
647236dd4d1SAnton Vorontsov
648d774efeaSTony Olechconfig USB_U132_HCD
649d774efeaSTony Olech	tristate "Elan U132 Adapter Host Controller"
65025e11ec4SFlorian Fainelli	depends on USB_FTDI_ELAN
651d774efeaSTony Olech	help
652d774efeaSTony Olech	  The U132 adapter is a USB to CardBus adapter specifically designed
653d774efeaSTony Olech	  for PC cards that contain an OHCI host controller. Typical PC cards
654d774efeaSTony Olech	  are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
655d774efeaSTony Olech	  adapter will *NOT* work with PC cards that do not contain an OHCI
656d774efeaSTony Olech	  controller.
657d774efeaSTony Olech
6583cb2fcccSMatt LaPlante	  For those PC cards that contain multiple OHCI controllers only the
659d774efeaSTony Olech	  first one is used.
660d774efeaSTony Olech
661d774efeaSTony Olech	  The driver consists of two modules, the "ftdi-elan" module is a
662d774efeaSTony Olech	  USB client driver that interfaces to the FTDI chip within ELAN's
663d774efeaSTony Olech	  USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
664d774efeaSTony Olech	  controller driver that talks to the OHCI controller within the
665d774efeaSTony Olech	  CardBus cards that are inserted in the U132 adapter.
666d774efeaSTony Olech
667d774efeaSTony Olech	  This driver has been tested with a CardBus OHCI USB adapter, and
668d774efeaSTony Olech	  worked with a USB PEN Drive inserted into the first USB port of
669d774efeaSTony Olech	  the PCCARD. A rather pointless thing to do, but useful for testing.
670d774efeaSTony Olech
671d774efeaSTony Olech	  It is safe to say M here.
672d774efeaSTony Olech
673d774efeaSTony Olech	  See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
674d774efeaSTony Olech
6751da177e4SLinus Torvaldsconfig USB_SL811_HCD
6761da177e4SLinus Torvalds	tristate "SL811HS HCD support"
6771da177e4SLinus Torvalds	help
6781da177e4SLinus Torvalds	  The SL811HS is a single-port USB controller that supports either
6791da177e4SLinus Torvalds	  host side or peripheral side roles.  Enable this option if your
6801da177e4SLinus Torvalds	  board has this chip, and you want to use it as a host controller.
6811da177e4SLinus Torvalds	  If unsure, say N.
6821da177e4SLinus Torvalds
6831da177e4SLinus Torvalds	  To compile this driver as a module, choose M here: the
6841da177e4SLinus Torvalds	  module will be called sl811-hcd.
6851da177e4SLinus Torvalds
686ad7c56f0SMike Frysingerconfig USB_SL811_HCD_ISO
687ad7c56f0SMike Frysinger	bool "partial ISO support"
688ad7c56f0SMike Frysinger	depends on USB_SL811_HCD
689ad7c56f0SMike Frysinger	help
690ad7c56f0SMike Frysinger	  The driver doesn't support iso_frame_desc (yet), but for some simple
691ad7c56f0SMike Frysinger	  devices that just queue one ISO frame per URB, then ISO transfers
692ad7c56f0SMike Frysinger	  "should" work using the normal urb status fields.
693ad7c56f0SMike Frysinger
694ad7c56f0SMike Frysinger	  If unsure, say N.
695ad7c56f0SMike Frysinger
696c6de2b64SDavid Brownellconfig USB_SL811_CS
697c6de2b64SDavid Brownell	tristate "CF/PCMCIA support for SL811HS HCD"
698c6de2b64SDavid Brownell	depends on USB_SL811_HCD && PCMCIA
699c6de2b64SDavid Brownell	help
700c6de2b64SDavid Brownell	  Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
701c6de2b64SDavid Brownell	  REX-CFU1U CF card (often used with PDAs).  If unsure, say N.
702c6de2b64SDavid Brownell
703c6de2b64SDavid Brownell	  To compile this driver as a module, choose M here: the
704c6de2b64SDavid Brownell	  module will be called "sl811_cs".
705c6de2b64SDavid Brownell
7065d304358SYoshihiro Shimodaconfig USB_R8A66597_HCD
707fa0de2b6SM4rkusXXL	tristate "R8A66597 HCD support"
7085d304358SYoshihiro Shimoda	help
7095d304358SYoshihiro Shimoda	  The R8A66597 is a USB 2.0 host and peripheral controller.
7105d304358SYoshihiro Shimoda
7115d304358SYoshihiro Shimoda	  Enable this option if your board has this chip, and you want
7125d304358SYoshihiro Shimoda	  to use it as a host controller.  If unsure, say N.
7135d304358SYoshihiro Shimoda
7145d304358SYoshihiro Shimoda	  To compile this driver as a module, choose M here: the
7155d304358SYoshihiro Shimoda	  module will be called r8a66597-hcd.
7165d304358SYoshihiro Shimoda
717034d7c13SKuninori Morimotoconfig USB_RENESAS_USBHS_HCD
718034d7c13SKuninori Morimoto	tristate "Renesas USBHS HCD support"
719034d7c13SKuninori Morimoto	depends on USB_RENESAS_USBHS
720034d7c13SKuninori Morimoto	help
721034d7c13SKuninori Morimoto	  The Renesas USBHS is a USB 2.0 host and peripheral controller.
722034d7c13SKuninori Morimoto
723034d7c13SKuninori Morimoto	  Enable this option if your board has this chip, and you want
724034d7c13SKuninori Morimoto	  to use it as a host controller.  If unsure, say N.
725034d7c13SKuninori Morimoto
726034d7c13SKuninori Morimoto	  To compile this driver as a module, choose M here: the
727034d7c13SKuninori Morimoto	  module will be called renesas-usbhs.
728034d7c13SKuninori Morimoto
7297e6133aaSDavid Vrabelconfig USB_WHCI_HCD
730eb83be98SGreg Kroah-Hartman	tristate "Wireless USB Host Controller Interface (WHCI) driver"
73136f8ecbfSRandy Dunlap	depends on PCI && USB && UWB
7327e6133aaSDavid Vrabel	select USB_WUSB
7337e6133aaSDavid Vrabel	select UWB_WHCI
7347e6133aaSDavid Vrabel	help
7357e6133aaSDavid Vrabel	  A driver for PCI-based Wireless USB Host Controllers that are
7367e6133aaSDavid Vrabel	  compliant with the WHCI specification.
7377e6133aaSDavid Vrabel
7387e6133aaSDavid Vrabel	  To compile this driver a module, choose M here: the module
7397e6133aaSDavid Vrabel	  will be called "whci-hcd".
740d09318b8SInaky Perez-Gonzalez
741d09318b8SInaky Perez-Gonzalezconfig USB_HWA_HCD
742eb83be98SGreg Kroah-Hartman	tristate "Host Wire Adapter (HWA) driver"
743cbb67199SThomas Pugliese	depends on USB && UWB
744d09318b8SInaky Perez-Gonzalez	select USB_WUSB
745d09318b8SInaky Perez-Gonzalez	select UWB_HWA
746d09318b8SInaky Perez-Gonzalez	help
747d09318b8SInaky Perez-Gonzalez	  This driver enables you to connect Wireless USB devices to
748d09318b8SInaky Perez-Gonzalez	  your system using a Host Wire Adaptor USB dongle. This is an
749d09318b8SInaky Perez-Gonzalez	  UWB Radio Controller and WUSB Host Controller connected to
750d09318b8SInaky Perez-Gonzalez	  your machine via USB (specified in WUSB1.0).
751d09318b8SInaky Perez-Gonzalez
752d09318b8SInaky Perez-Gonzalez	  To compile this driver a module, choose M here: the module
753d09318b8SInaky Perez-Gonzalez	  will be called "hwa-hc".
75423d3e7a6SMartin Fuzzey
75523d3e7a6SMartin Fuzzeyconfig USB_IMX21_HCD
7565de9ec4dSSascha Hauer       tristate "i.MX21 HCD support"
75725e11ec4SFlorian Fainelli       depends on ARM && ARCH_MXC
75823d3e7a6SMartin Fuzzey       help
75923d3e7a6SMartin Fuzzey         This driver enables support for the on-chip USB host in the
7605de9ec4dSSascha Hauer         i.MX21 processor.
76123d3e7a6SMartin Fuzzey
76223d3e7a6SMartin Fuzzey         To compile this driver as a module, choose M here: the
76323d3e7a6SMartin Fuzzey         module will be called "imx21-hcd".
76423d3e7a6SMartin Fuzzey
76562e11d1bSHauke Mehrtensconfig USB_HCD_BCMA
76662e11d1bSHauke Mehrtens	tristate "BCMA usb host driver"
767eb83be98SGreg Kroah-Hartman	depends on BCMA
76862e11d1bSHauke Mehrtens	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
76962e11d1bSHauke Mehrtens	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
77062e11d1bSHauke Mehrtens	help
77171c421dbSJesper Dangaard Brouer	  Enable support for the EHCI and OCHI host controller on an bcma bus.
77262e11d1bSHauke Mehrtens	  It converts the bcma driver into two platform device drivers
77362e11d1bSHauke Mehrtens	  for ehci and ohci.
77462e11d1bSHauke Mehrtens
77562e11d1bSHauke Mehrtens	  If unsure, say N.
7767043c2ccSHauke Mehrtens
7777043c2ccSHauke Mehrtensconfig USB_HCD_SSB
7787043c2ccSHauke Mehrtens	tristate "SSB usb host driver"
779eb83be98SGreg Kroah-Hartman	depends on SSB
7807043c2ccSHauke Mehrtens	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
7817043c2ccSHauke Mehrtens	select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
7827043c2ccSHauke Mehrtens	help
78371c421dbSJesper Dangaard Brouer	  Enable support for the EHCI and OCHI host controller on an bcma bus.
7847043c2ccSHauke Mehrtens	  It converts the bcma driver into two platform device drivers
7857043c2ccSHauke Mehrtens	  for ehci and ohci.
7867043c2ccSHauke Mehrtens
7877043c2ccSHauke Mehrtens	  If unsure, say N.
788726a85caSJack Pham
789726a85caSJack Phamconfig USB_HCD_TEST_MODE
790726a85caSJack Pham	bool "HCD test mode support"
791726a85caSJack Pham	---help---
792726a85caSJack Pham	  Say 'Y' to enable additional software test modes that may be
793726a85caSJack Pham	  supported by the host controller drivers.
794726a85caSJack Pham
795726a85caSJack Pham	  One such test mode is the Embedded High-speed Host Electrical Test
796726a85caSJack Pham	  (EHSET) for EHCI host controller hardware, specifically the "Single
797726a85caSJack Pham	  Step Set Feature" test.  Typically this will be enabled for On-the-Go
798726a85caSJack Pham	  or embedded hosts that need to undergo USB-IF compliance testing with
799726a85caSJack Pham	  the aid of special testing hardware.  In the future, this may expand
800726a85caSJack Pham	  to include other tests that require support from a HCD driver.
801726a85caSJack Pham
802726a85caSJack Pham	  This option is of interest only to developers who need to validate
803726a85caSJack Pham	  their USB hardware designs.  It is not needed for normal use.  If
804726a85caSJack Pham	  unsure, say N.
805