Merge drm/drm-fixes into drm-misc-fixes

Let's start the 7.3 drm-misc-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.q

Merge remote-tracking branch 'drm/drm-next' into msm-next-backmerge

Backmerge of drm-next, mainly to pick up dt bindings docs updates to
avoid conflicts.

Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>

show more ...

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch

Merge tag 'kvm-riscv-7.3-1' of https://github.com/kvm-riscv/linux into HEAD

KVM/riscv changes for 7.3

- Svadu/Zicfiss/Zicfilp FWFT support for Guest
- Use try_cmpxchg for IMSIC MRIF RMW
- More arch-specific tracepoints in KVM RISC-V
- Eager Page Splitting for KVM RISC-V
- Optimize hfence request handling for SMP Guests
- Improve dirty log clearing by skipping zero bits in mask
- Guard HFENCE range loops against overflow
- CPU PM notifiers in KVM RISC-V for non-retentive idle states
- Fix kernel-mode vector context save/restore for Guest

show more ...

Merge drm/drm-next into drm-xe-next

Sync some i915/display changes

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-next into drm-intel-next

Sync with v7.2-rc1.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging to get drm-misc-next to v7.2-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>>

Merge tag 'v7.2-rc1' into drm-rust-next

Merge v7.2-rc1 into drm-rust-next to start the next cycle.

Devres now requires T: 'static, which conflicts with shmem::Object using
Devres<SGTableMap<T, C>> without that bound. Resolve by adding 'static
as a supertrait to DriverObject and DeviceContext, which does not
restrict any current use cases since DriverObject is always implemented
on owned, refcounted types and DeviceContext is a sealed marker trait
with only unit-type implementors.

If DriverObject (or DeviceContext) ever becomes lifetime-parameterized
(e.g. via a GAT for TTM backed objects), the 'static supertrait can be
relaxed at that point.

Signed-off-by: Danilo Krummrich <dakr@kernel.org>

show more ...

Merge branch 'for-7.3/steam' into for-linus

- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improveme

Merge branch 'for-7.3/steam' into for-linus

- initial support for 2026 Steam Controller (Vicki Pfau)
- support for sensor events on the 2025 Steam Controller (Vicki Pfau)
- assorted fixes, improvements and code refactoring (Vicki Pfau)

show more ...

Merge tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and

Merge tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC driver updates from Arnd Bergmann:
"The SoC driver changes once more consist of many small fixes and
cleanups, that are to a large part the result of automated testing.

On platform specific drivers, this includes SoC specific code for
xilinx, freescale/nxp, qualcomm, TI, aspeed, omap, tegra, samsung,
rockchip, renesas, ixp4xx. In firmware drivers, we see a similar
picture for SCMI and qcomtee.

Aside from these, we see actual new hardware support in a few areas:

- The Apple platform gets a new driver for low power states

- Updates to Qualcomm platform drivers add several new hardware
specific features and additional SoCs.

- Amlogic SoC support for A1 and T7 is added

- The Mediatek MMSYS driver is refactored as a cleanup"

* tag 'soc-drivers-7.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (157 commits)
soc: qcom: make QCOM_PDR_MSG selectable
soc: qcom: ubwc: Fix missing include
soc: qcom: ubwc: Fix link error when QCOM_SMEM=n
media: iris: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
drm/msm: Guard the QCOM_UBWC_CONFIG select with QCOM_SMEM
dt-bindings: arm: qcom,ids: Add SoC ID for Snapdragon SDM 850
firmware: xilinx: Clear firmware notifiers across kexec transitions
firmware: xilinx: Release all peripheral devices from firmware
firmware: xilinx: Add support to clear EL3 PM state
firmware: xilinx: Propagate actual error from feature check
firmware: xilinx: Use TF-A feature check for TF-A-specific APIs
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
...

show more ...

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
dro

Merge tag 'timers-v7.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Use designated initializers for sh_mtu2, sh_cmt, and sh_tmu, and
drop the unused initializer in the platform_device_id table for
sh_mtu2 (Uwe Kleine-König)

- Remove redundant dev_err()/dev_err_probe() messages when
devm_request_*_irq() fails, as the helper already logs an error
message (Pan Chuang)

- Fix a boot hang on Allwinner D1 when a forced minimum delta is used
with the sun4i timer (Felix Yan)

- Fix an IRQ leak in the cpuhp_setup_state() error path by freeing the
IRQ on failure in the NXP PIT driver (WenTao Liang)

- Fix incorrect unmapping of shared MMIO between the clocksource and
clockevent drivers. If one of them fails to initialize, the error
path unmaps the shared MMIO region, leaving the other driver with an
invalid mapping on clps711x (Guangshuo Li)

- Make the samsung_pwm driver compatible with PREEMPT_RT by replacing
regular spinlocks with raw_spinlock_t in atomic contexts (Marek
Szyprowski)

- Use __raw_readl() and __raw_writel() instead of ioread32() and
iowrite32() to support SWAP_IO_SPACE in the rtl-otto driver (Rustam
Adilov)

- Fix a missing clk_disable_unprepare() call in the timer
initialization error path of the Armada driver (Yuho Choi)

Link: https://lore.kernel.org/lkml/75feea31-683d-45a1-87f4-ab045e0152ae@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.3 merge window.

Merge tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers

FSL SOC Changes for 7.3

Freescale QUICC Engine:
- Use generic I/O helpers in interrupt co

Merge tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux into soc/drivers

FSL SOC Changes for 7.3

Freescale QUICC Engine:
- Use generic I/O helpers in interrupt controller for IO Ports
- Move CONFIG_QE_GPIO out of powerpc
- Fix DT scan for GPIO nodes
- Convert IO ports interrupt controller to generic IRQ chip
- Add support of IRQs in GPIO controller
- Implement get_direction() in GPIO controller
- Check platform_driver_register() in interrupt controller for IO Ports

Data Path I/O:
- Replace maintainer
- Remove redundant dev_err()
- Fix kernel-doc typos

Freescale Management Complex:
- Use strscpy() to copy strings into arrays
- Remove redundant dev_err()
- Drop unused assignment of acpi_device_id::driver_data

Other changes:
- Add kernel and device tree binding support for RCW override,
completing the SerDes PHY driver functionality
- Fix kernel-doc warnings and typos in DPAA header

* tag 'soc_fsl-7.3-1' of https://git.kernel.org/pub/scm/linux/kernel/git/chleroy/linux: (31 commits)
bus: fsl-mc: drop unused assignment of acpi_device_id::driver_data
soc: fsl: qe: check platform_driver_register() in qe_ic_of_init()
phy: lynx-10g: use RCW override procedure for dynamic protocol change
soc: fsl: guts: implement the RCW override procedure
dt-bindings: fsl: layerscape-dcfg: define DCFG_DCSR region
soc: fsl: guts: make fsl_soc_data available after fsl_guts_init()
soc: fsl: guts: make it easier to determine on which SoC we are running
soc: fsl: guts: add a central fsl_guts_read() function
soc: fsl: guts: add a global structure to hold state
soc: fsl: guts: use a macro to encode the DCFG CCSR space
soc: fsl: guts: perform fsl_guts_init() error teardown in reverse order of setup
soc: fsl: dpio: fix kernel-doc typos
soc: fsl: fix kernel-doc warnings and typos
bus: fsl-mc: Remove redundant dev_err()
soc: fsl: qe: Add support of IRQs in QE GPIO
soc: fsl: qe: Rename irq variable to parent_irq
soc: fsl: qe: Convert to generic IRQ chip
soc: fsl: qe: Handle spurious interrupts
soc: fsl: qe: Iterate over all pending interrupts in cascade handler
soc: fsl: qe: Use generic_handle_domain_irq()
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

powerpc: Move CONFIG_QE_GPIO to SoC

Commit 7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc")
moved QE into drivers/soc including gpio.c but left CONFIG_QE_GPIO
in powerpc's Kconfig.

Mov

powerpc: Move CONFIG_QE_GPIO to SoC

Commit 7aa1aa6ecec2 ("QE: Move QE from arch/powerpc to drivers/soc")
moved QE into drivers/soc including gpio.c but left CONFIG_QE_GPIO
in powerpc's Kconfig.

Move it to SoC as well as it is the only place it is used:

drivers/soc/fsl/qe/Makefile:obj-$(CONFIG_QE_GPIO) += gpio.o qe_ports_ic.o
include/soc/fsl/qe/qe.h:#ifdef CONFIG_QE_GPIO
include/soc/fsl/qe/qe.h:#endif /* CONFIG_QE_GPIO */

There is also a dependency in USB subsystem for CONFIG_USB_FHCI_HCD:

drivers/usb/host/Kconfig: depends on QE_GPIO && QUICC_ENGINE

Because that USB driver selects CONFIG_FSL_GTM which is specific to
powerpc, it has to depend on CONFIG_PPC.

Acked-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://lore.kernel.org/r/9a7131d15a94e2017877e628f0e97f9aa2e0aae9.1785140877.git.chleroy@kernel.org
Signed-off-by: Christophe Leroy (CS GROUP) <chleroy@kernel.org>

show more ...

Merge tag 'v7.2-rc3' into next

Sync up with mainline to pull in stable fixes to avoid merge conflicts.

Merge drm/drm-fixes into drm-misc-fixes

Pull in tag v7.2-rc1 so that drm-misc-fixes becomes useful again,
and drm-misc-next-fixes can be closed.

Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>

Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes

Merge tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB and Thunderbolt driver updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for 7.2-rc1.

Lots of little stuff in here, major highlights include:

- USB4STREAM support for Thunderbolt devices. A new way to send "raw"
data very quickly over a USB4 connection to another system directly

- Other thunderbolt updates and changes to make the stream code work

- xhci driver updates and additions

- typec driver updates and additions

- usb gadget driver updates and fixes for reported issues

- zh_CN documentation translation of the USB documentation

- usb-serial driver updates

- dts cleanups for some USB platforms

- other minor USB driver updates and tweaks

All of these have been in linux-next for over a week with no reported
issues, most of them for many many weeks"

* tag 'usb-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (131 commits)
usb: ucsi: huawei_gaokun: support mode switching
thunderbolt: debugfs: Fix sideband write size check
thunderbolt: debugfs: Fix margining error counter buffer leak
usb: host: xhci-rcar: Split R-Car Gen2 and Gen3 .plat_start() handling
usb: host: xhci-rcar: Remove SET_XHCI_PLAT_PRIV_FOR_RCAR() macro
usb: xhci: allocate internal DCBAA mirror dynamically
usb: xhci: allocate DCBAA based on host controller max slots
usb: xhci: refactor DCBAA struct
xhci: Prevent queuing new commands if xhci is inaccessible
xhci: dbc: detect and recover hung DbC during enumeraton
xhci: dbc: add timestamps to DbC state changes in a new helper.
xhci: dbc: add helper to set and clear DbC DCE enable bit
xhci: dbc: serialize enabling and disabling dbc
xhci: dbc: Fix sysfs ABI Documentation for xhci dbc states
usb: xhci: Improve Soft Retries after short transfers
usb: xhci: Remove isochronous URB_SHORT_NOT_OK handling
usb: xhci: Remove skip_isoc_td()
usb: xhci: Simplify xhci_quiesce()
usb: xhci: remove legacy 'num_trbs_free' tracking
usb: xhci: fix typo in xhci_set_port_power() comment
...

show more ...

usb: host: add ARCH_AIROHA in XHCI MTK dependency

Airoha SoC use the same register map and logic of the Mediatek xHCI
driver, hence add it to the dependency list to permit compilation also
on this A

usb: host: add ARCH_AIROHA in XHCI MTK dependency

Airoha SoC use the same register map and logic of the Mediatek xHCI
driver, hence add it to the dependency list to permit compilation also
on this ARCH.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20260519164903.31258-1-ansuelsmth@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required fo

Merge branch '20260507-ubwc-rework-v4-4-c19593d20c1d@oss.qualcomm.com' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into HEAD

Merge the branch with the soc/qcom changes, required for the next UBWC
patches.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>

show more ...

usb: xhci-pci: add AMD Promontory 21 PCI glue

AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a sma

usb: xhci-pci: add AMD Promontory 21 PCI glue

AMD Promontory 21 (PROM21) xHCI PCI functions use the common xhci-pci
core for USB operation, but also expose controller-specific sensor data.
Add a small PROM21 PCI glue driver for AMD 1022:43fc and 1022:43fd
controllers.

The glue delegates USB host operation to the common xhci-pci core and
publishes a "hwmon" auxiliary device with parent-provided MMIO data.
Auxiliary device creation failure is logged but does not fail the xHCI
probe.

Make the PROM21 glue a hidden Kconfig tristate driven by the user-visible
SENSORS_PROM21_XHCI option. If sensor support is disabled, generic
xhci-pci binds PROM21 controllers normally. If sensor support is enabled,
the glue follows USB_XHCI_PCI.

This keeps the auxiliary device available for a modular sensor driver while
avoiding a built-in xhci-pci core handing PROM21 controllers to a glue
driver that is only available as a module during initramfs.

Assisted-by: Codex:gpt-5.5
Signed-off-by: Jihong Min <hurryman2212@gmail.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Tested-by: Yaroslav Isakov <yaroslav.isakov@gmail.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://patch.msgid.link/20260519000732.2334711-2-hurryman2212@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.

Merge drm/drm-next into drm-intel-gt-next

Backmerging to pull in commit 5401b9adebc9 ("i915: don't use
a vma that didn't match the context VM") to revert it.

Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

show more ...

Merge tag 'timers-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Added the DT bindings for the compatible string 'fsl,imx25-epit'
(Fr

Merge tag 'timers-v7.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/daniel.lezcano/linux into timers/clocksource

- Added the DT bindings for the compatible string 'fsl,imx25-epit'
(Frank Li)

- Made the rttm_cs variable static for the rtl otto timer driver
(Krzysztof Kozlowski)

- Fixed error return code handling in the sun5i timer driver (Chen Ni)

- Made the timer-of and the mmio code compatible with modules (Daniel
Lezcano)

Link: https://lore.kernel.org/151feae1-39ba-4abd-a9f9-9bff377a2cd8@oss.qualcomm.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 7.1 merge window.

Merge tag 'v7.0-rc3' into next

Sync up with the mainline to brig up the latest changes, specifically
changes to ALPS driver.

Merge branch 'for-7.1-printf-kunit-build' into for-linus

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device

Merge branch 'for-7.1/core-v2' into for-linus

- fixed handling of 0-sized reports (Dmitry Torokhov)
- convert core code to __free() (Dmitry Torokhov)
- support for multiple batteries per HID device (Lucas Zampieri)

show more ...