1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3 * AMx3 Wkup M3 IPC driver
4 *
5 * Copyright (C) 2015 Texas Instruments, Inc.
6 *
7 * Dave Gerlach <d-gerlach@ti.com>
8 */
9
10 #include <linux/debugfs.h>
11 #include <linux/err.h>
12 #include <linux/firmware.h>
13 #include <linux/kernel.h>
14 #include <linux/kthread.h>
15 #include <linux/interrupt.h>
16 #include <linux/irq.h>
17 #include <linux/module.h>
18 #include <linux/of.h>
19 #include <linux/platform_device.h>
20 #include <linux/remoteproc.h>
21 #include <linux/suspend.h>
22 #include <linux/wkup_m3_ipc.h>
23
24 #define AM33XX_CTRL_IPC_REG_COUNT 0x8
25 #define AM33XX_CTRL_IPC_REG_OFFSET(m) (0x4 + 4 * (m))
26
27 /* AM33XX M3_TXEV_EOI register */
28 #define AM33XX_CONTROL_M3_TXEV_EOI 0x00
29
30 #define AM33XX_M3_TXEV_ACK (0x1 << 0)
31 #define AM33XX_M3_TXEV_ENABLE (0x0 << 0)
32
33 #define IPC_CMD_DS0 0x4
34 #define IPC_CMD_STANDBY 0xc
35 #define IPC_CMD_IDLE 0x10
36 #define IPC_CMD_RESET 0xe
37 #define DS_IPC_DEFAULT 0xffffffff
38 #define M3_VERSION_UNKNOWN 0x0000ffff
39 #define M3_BASELINE_VERSION 0x191
40 #define M3_STATUS_RESP_MASK (0xffff << 16)
41 #define M3_FW_VERSION_MASK 0xffff
42 #define M3_WAKE_SRC_MASK 0xff
43
44 #define IPC_MEM_TYPE_SHIFT (0x0)
45 #define IPC_MEM_TYPE_MASK (0x7 << 0)
46 #define IPC_VTT_STAT_SHIFT (0x3)
47 #define IPC_VTT_STAT_MASK (0x1 << 3)
48 #define IPC_VTT_GPIO_PIN_SHIFT (0x4)
49 #define IPC_VTT_GPIO_PIN_MASK (0x3f << 4)
50 #define IPC_IO_ISOLATION_STAT_SHIFT (10)
51 #define IPC_IO_ISOLATION_STAT_MASK (0x1 << 10)
52
53 #define IPC_DBG_HALT_SHIFT (11)
54 #define IPC_DBG_HALT_MASK (0x1 << 11)
55
56 #define M3_STATE_UNKNOWN 0
57 #define M3_STATE_RESET 1
58 #define M3_STATE_INITED 2
59 #define M3_STATE_MSG_FOR_LP 3
60 #define M3_STATE_MSG_FOR_RESET 4
61
62 #define WKUP_M3_SD_FW_MAGIC 0x570C
63
64 #define WKUP_M3_DMEM_START 0x80000
65 #define WKUP_M3_AUXDATA_OFFSET 0x1000
66 #define WKUP_M3_AUXDATA_SIZE 0xFF
67
68 static struct wkup_m3_ipc *m3_ipc_state;
69
70 static const struct wkup_m3_wakeup_src wakeups[] = {
71 {.irq_nr = 16, .src = "PRCM"},
72 {.irq_nr = 35, .src = "USB0_PHY"},
73 {.irq_nr = 36, .src = "USB1_PHY"},
74 {.irq_nr = 40, .src = "I2C0"},
75 {.irq_nr = 41, .src = "RTC Timer"},
76 {.irq_nr = 42, .src = "RTC Alarm"},
77 {.irq_nr = 43, .src = "Timer0"},
78 {.irq_nr = 44, .src = "Timer1"},
79 {.irq_nr = 45, .src = "UART"},
80 {.irq_nr = 46, .src = "GPIO0"},
81 {.irq_nr = 48, .src = "MPU_WAKE"},
82 {.irq_nr = 49, .src = "WDT0"},
83 {.irq_nr = 50, .src = "WDT1"},
84 {.irq_nr = 51, .src = "ADC_TSC"},
85 {.irq_nr = 0, .src = "Unknown"},
86 };
87
88 /**
89 * wkup_m3_copy_aux_data - Copy auxiliary data to special region of m3 dmem
90 * @data - pointer to data
91 * @sz - size of data to copy (limit 256 bytes)
92 *
93 * Copies any additional blob of data to the wkup_m3 dmem to be used by the
94 * firmware
95 */
wkup_m3_copy_aux_data(struct wkup_m3_ipc * m3_ipc,const void * data,int sz)96 static unsigned long wkup_m3_copy_aux_data(struct wkup_m3_ipc *m3_ipc,
97 const void *data, int sz)
98 {
99 unsigned long aux_data_dev_addr;
100 void *aux_data_addr;
101
102 aux_data_dev_addr = WKUP_M3_DMEM_START + WKUP_M3_AUXDATA_OFFSET;
103 aux_data_addr = rproc_da_to_va(m3_ipc->rproc,
104 aux_data_dev_addr,
105 WKUP_M3_AUXDATA_SIZE,
106 NULL);
107 memcpy(aux_data_addr, data, sz);
108
109 return WKUP_M3_AUXDATA_OFFSET;
110 }
111
wkup_m3_scale_data_fw_cb(const struct firmware * fw,void * context)112 static void wkup_m3_scale_data_fw_cb(const struct firmware *fw, void *context)
113 {
114 unsigned long val, aux_base;
115 struct wkup_m3_scale_data_header hdr;
116 struct wkup_m3_ipc *m3_ipc = context;
117 struct device *dev = m3_ipc->dev;
118
119 if (!fw) {
120 dev_err(dev, "Voltage scale fw name given but file missing.\n");
121 return;
122 }
123
124 memcpy(&hdr, fw->data, sizeof(hdr));
125
126 if (hdr.magic != WKUP_M3_SD_FW_MAGIC) {
127 dev_err(dev, "PM: Voltage Scale Data binary does not appear valid.\n");
128 goto release_sd_fw;
129 }
130
131 aux_base = wkup_m3_copy_aux_data(m3_ipc, fw->data + sizeof(hdr),
132 fw->size - sizeof(hdr));
133
134 val = (aux_base + hdr.sleep_offset);
135 val |= ((aux_base + hdr.wake_offset) << 16);
136
137 m3_ipc->volt_scale_offsets = val;
138
139 release_sd_fw:
140 release_firmware(fw);
141 };
142
wkup_m3_init_scale_data(struct wkup_m3_ipc * m3_ipc,struct device * dev)143 static int wkup_m3_init_scale_data(struct wkup_m3_ipc *m3_ipc,
144 struct device *dev)
145 {
146 int ret = 0;
147
148 /*
149 * If no name is provided, user has already been warned, pm will
150 * still work so return 0
151 */
152
153 if (!m3_ipc->sd_fw_name)
154 return ret;
155
156 ret = request_firmware_nowait(THIS_MODULE, FW_ACTION_UEVENT,
157 m3_ipc->sd_fw_name, dev, GFP_ATOMIC,
158 m3_ipc, wkup_m3_scale_data_fw_cb);
159
160 return ret;
161 }
162
163 #ifdef CONFIG_DEBUG_FS
wkup_m3_set_halt_late(bool enabled)164 static void wkup_m3_set_halt_late(bool enabled)
165 {
166 if (enabled)
167 m3_ipc_state->halt = (1 << IPC_DBG_HALT_SHIFT);
168 else
169 m3_ipc_state->halt = 0;
170 }
171
option_get(void * data,u64 * val)172 static int option_get(void *data, u64 *val)
173 {
174 u32 *option = data;
175
176 *val = *option;
177
178 return 0;
179 }
180
option_set(void * data,u64 val)181 static int option_set(void *data, u64 val)
182 {
183 u32 *option = data;
184
185 *option = val;
186
187 if (option == &m3_ipc_state->halt) {
188 if (val)
189 wkup_m3_set_halt_late(true);
190 else
191 wkup_m3_set_halt_late(false);
192 }
193
194 return 0;
195 }
196
197 DEFINE_SIMPLE_ATTRIBUTE(wkup_m3_ipc_option_fops, option_get, option_set,
198 "%llu\n");
199
wkup_m3_ipc_dbg_init(struct wkup_m3_ipc * m3_ipc)200 static int wkup_m3_ipc_dbg_init(struct wkup_m3_ipc *m3_ipc)
201 {
202 m3_ipc->dbg_path = debugfs_create_dir("wkup_m3_ipc", NULL);
203
204 if (IS_ERR(m3_ipc->dbg_path))
205 return -EINVAL;
206
207 (void)debugfs_create_file("enable_late_halt", 0644,
208 m3_ipc->dbg_path,
209 &m3_ipc->halt,
210 &wkup_m3_ipc_option_fops);
211
212 return 0;
213 }
214
wkup_m3_ipc_dbg_destroy(struct wkup_m3_ipc * m3_ipc)215 static inline void wkup_m3_ipc_dbg_destroy(struct wkup_m3_ipc *m3_ipc)
216 {
217 debugfs_remove_recursive(m3_ipc->dbg_path);
218 }
219 #else
wkup_m3_ipc_dbg_init(struct wkup_m3_ipc * m3_ipc)220 static inline int wkup_m3_ipc_dbg_init(struct wkup_m3_ipc *m3_ipc)
221 {
222 return 0;
223 }
224
wkup_m3_ipc_dbg_destroy(struct wkup_m3_ipc * m3_ipc)225 static inline void wkup_m3_ipc_dbg_destroy(struct wkup_m3_ipc *m3_ipc)
226 {
227 }
228 #endif /* CONFIG_DEBUG_FS */
229
am33xx_txev_eoi(struct wkup_m3_ipc * m3_ipc)230 static void am33xx_txev_eoi(struct wkup_m3_ipc *m3_ipc)
231 {
232 writel(AM33XX_M3_TXEV_ACK,
233 m3_ipc->ipc_mem_base + AM33XX_CONTROL_M3_TXEV_EOI);
234 }
235
am33xx_txev_enable(struct wkup_m3_ipc * m3_ipc)236 static void am33xx_txev_enable(struct wkup_m3_ipc *m3_ipc)
237 {
238 writel(AM33XX_M3_TXEV_ENABLE,
239 m3_ipc->ipc_mem_base + AM33XX_CONTROL_M3_TXEV_EOI);
240 }
241
wkup_m3_ctrl_ipc_write(struct wkup_m3_ipc * m3_ipc,u32 val,int ipc_reg_num)242 static void wkup_m3_ctrl_ipc_write(struct wkup_m3_ipc *m3_ipc,
243 u32 val, int ipc_reg_num)
244 {
245 if (WARN(ipc_reg_num < 0 || ipc_reg_num > AM33XX_CTRL_IPC_REG_COUNT,
246 "ipc register operation out of range"))
247 return;
248
249 writel(val, m3_ipc->ipc_mem_base +
250 AM33XX_CTRL_IPC_REG_OFFSET(ipc_reg_num));
251 }
252
wkup_m3_ctrl_ipc_read(struct wkup_m3_ipc * m3_ipc,int ipc_reg_num)253 static unsigned int wkup_m3_ctrl_ipc_read(struct wkup_m3_ipc *m3_ipc,
254 int ipc_reg_num)
255 {
256 if (WARN(ipc_reg_num < 0 || ipc_reg_num > AM33XX_CTRL_IPC_REG_COUNT,
257 "ipc register operation out of range"))
258 return 0;
259
260 return readl(m3_ipc->ipc_mem_base +
261 AM33XX_CTRL_IPC_REG_OFFSET(ipc_reg_num));
262 }
263
wkup_m3_fw_version_read(struct wkup_m3_ipc * m3_ipc)264 static int wkup_m3_fw_version_read(struct wkup_m3_ipc *m3_ipc)
265 {
266 int val;
267
268 val = wkup_m3_ctrl_ipc_read(m3_ipc, 2);
269
270 return val & M3_FW_VERSION_MASK;
271 }
272
wkup_m3_txev_handler(int irq,void * ipc_data)273 static irqreturn_t wkup_m3_txev_handler(int irq, void *ipc_data)
274 {
275 struct wkup_m3_ipc *m3_ipc = ipc_data;
276 struct device *dev = m3_ipc->dev;
277 int ver = 0;
278
279 am33xx_txev_eoi(m3_ipc);
280
281 switch (m3_ipc->state) {
282 case M3_STATE_RESET:
283 ver = wkup_m3_fw_version_read(m3_ipc);
284
285 if (ver == M3_VERSION_UNKNOWN ||
286 ver < M3_BASELINE_VERSION) {
287 dev_warn(dev, "CM3 Firmware Version %x not supported\n",
288 ver);
289 } else {
290 dev_info(dev, "CM3 Firmware Version = 0x%x\n", ver);
291 }
292
293 m3_ipc->state = M3_STATE_INITED;
294 wkup_m3_init_scale_data(m3_ipc, dev);
295 complete(&m3_ipc->sync_complete);
296 break;
297 case M3_STATE_MSG_FOR_RESET:
298 m3_ipc->state = M3_STATE_INITED;
299 complete(&m3_ipc->sync_complete);
300 break;
301 case M3_STATE_MSG_FOR_LP:
302 complete(&m3_ipc->sync_complete);
303 break;
304 case M3_STATE_UNKNOWN:
305 dev_warn(dev, "Unknown CM3 State\n");
306 }
307
308 am33xx_txev_enable(m3_ipc);
309
310 return IRQ_HANDLED;
311 }
312
wkup_m3_ping(struct wkup_m3_ipc * m3_ipc)313 static int wkup_m3_ping(struct wkup_m3_ipc *m3_ipc)
314 {
315 struct device *dev = m3_ipc->dev;
316 int ret;
317
318 if (!m3_ipc->mbox) {
319 dev_err(dev,
320 "No IPC channel to communicate with wkup_m3!\n");
321 return -EIO;
322 }
323
324 /*
325 * Write a dummy message to the mailbox in order to trigger the RX
326 * interrupt to alert the M3 that data is available in the IPC
327 * registers. We must enable the IRQ here and disable it after in
328 * the RX callback to avoid multiple interrupts being received
329 * by the CM3.
330 */
331 ret = mbox_send_message(m3_ipc->mbox, NULL);
332 if (ret < 0) {
333 dev_err(dev, "%s: mbox_send_message() failed: %d\n",
334 __func__, ret);
335 return ret;
336 }
337
338 ret = wait_for_completion_timeout(&m3_ipc->sync_complete,
339 msecs_to_jiffies(500));
340 if (!ret) {
341 dev_err(dev, "MPU<->CM3 sync failure\n");
342 m3_ipc->state = M3_STATE_UNKNOWN;
343 return -EIO;
344 }
345
346 mbox_client_txdone(m3_ipc->mbox, 0);
347 return 0;
348 }
349
wkup_m3_ping_noirq(struct wkup_m3_ipc * m3_ipc)350 static int wkup_m3_ping_noirq(struct wkup_m3_ipc *m3_ipc)
351 {
352 struct device *dev = m3_ipc->dev;
353 int ret;
354
355 if (!m3_ipc->mbox) {
356 dev_err(dev,
357 "No IPC channel to communicate with wkup_m3!\n");
358 return -EIO;
359 }
360
361 ret = mbox_send_message(m3_ipc->mbox, NULL);
362 if (ret < 0) {
363 dev_err(dev, "%s: mbox_send_message() failed: %d\n",
364 __func__, ret);
365 return ret;
366 }
367
368 mbox_client_txdone(m3_ipc->mbox, 0);
369 return 0;
370 }
371
wkup_m3_is_available(struct wkup_m3_ipc * m3_ipc)372 static int wkup_m3_is_available(struct wkup_m3_ipc *m3_ipc)
373 {
374 return ((m3_ipc->state != M3_STATE_RESET) &&
375 (m3_ipc->state != M3_STATE_UNKNOWN));
376 }
377
wkup_m3_set_vtt_gpio(struct wkup_m3_ipc * m3_ipc,int gpio)378 static void wkup_m3_set_vtt_gpio(struct wkup_m3_ipc *m3_ipc, int gpio)
379 {
380 m3_ipc->vtt_conf = (1 << IPC_VTT_STAT_SHIFT) |
381 (gpio << IPC_VTT_GPIO_PIN_SHIFT);
382 }
383
wkup_m3_set_io_isolation(struct wkup_m3_ipc * m3_ipc)384 static void wkup_m3_set_io_isolation(struct wkup_m3_ipc *m3_ipc)
385 {
386 m3_ipc->isolation_conf = (1 << IPC_IO_ISOLATION_STAT_SHIFT);
387 }
388
389 /* Public functions */
390 /**
391 * wkup_m3_set_mem_type - Pass wkup_m3 which type of memory is in use
392 * @m3_ipc: Pointer to wkup_m3_ipc context
393 * @mem_type: memory type value read directly from emif
394 *
395 * wkup_m3 must know what memory type is in use to properly suspend
396 * and resume.
397 */
wkup_m3_set_mem_type(struct wkup_m3_ipc * m3_ipc,int mem_type)398 static void wkup_m3_set_mem_type(struct wkup_m3_ipc *m3_ipc, int mem_type)
399 {
400 m3_ipc->mem_type = mem_type;
401 }
402
403 /**
404 * wkup_m3_set_resume_address - Pass wkup_m3 resume address
405 * @m3_ipc: Pointer to wkup_m3_ipc context
406 * @addr: Physical address from which resume code should execute
407 */
wkup_m3_set_resume_address(struct wkup_m3_ipc * m3_ipc,void * addr)408 static void wkup_m3_set_resume_address(struct wkup_m3_ipc *m3_ipc, void *addr)
409 {
410 m3_ipc->resume_addr = (unsigned long)addr;
411 }
412
413 /**
414 * wkup_m3_request_pm_status - Retrieve wkup_m3 status code after suspend
415 * @m3_ipc: Pointer to wkup_m3_ipc context
416 *
417 * Returns code representing the status of a low power mode transition.
418 * 0 - Successful transition
419 * 1 - Failure to transition to low power state
420 */
wkup_m3_request_pm_status(struct wkup_m3_ipc * m3_ipc)421 static int wkup_m3_request_pm_status(struct wkup_m3_ipc *m3_ipc)
422 {
423 unsigned int i;
424 int val;
425
426 val = wkup_m3_ctrl_ipc_read(m3_ipc, 1);
427
428 i = M3_STATUS_RESP_MASK & val;
429 i >>= __ffs(M3_STATUS_RESP_MASK);
430
431 return i;
432 }
433
434 /**
435 * wkup_m3_prepare_low_power - Request preparation for transition to
436 * low power state
437 * @m3_ipc: Pointer to wkup_m3_ipc context
438 * @state: A kernel suspend state to enter, either MEM or STANDBY
439 *
440 * Returns 0 if preparation was successful, otherwise returns error code
441 */
wkup_m3_prepare_low_power(struct wkup_m3_ipc * m3_ipc,int state)442 static int wkup_m3_prepare_low_power(struct wkup_m3_ipc *m3_ipc, int state)
443 {
444 struct device *dev = m3_ipc->dev;
445 int m3_power_state;
446 int ret = 0;
447
448 if (!wkup_m3_is_available(m3_ipc))
449 return -ENODEV;
450
451 switch (state) {
452 case WKUP_M3_DEEPSLEEP:
453 m3_power_state = IPC_CMD_DS0;
454 wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->volt_scale_offsets, 5);
455 break;
456 case WKUP_M3_STANDBY:
457 m3_power_state = IPC_CMD_STANDBY;
458 wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5);
459 break;
460 case WKUP_M3_IDLE:
461 m3_power_state = IPC_CMD_IDLE;
462 wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 5);
463 break;
464 default:
465 return 1;
466 }
467
468 /* Program each required IPC register then write defaults to others */
469 wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->resume_addr, 0);
470 wkup_m3_ctrl_ipc_write(m3_ipc, m3_power_state, 1);
471 wkup_m3_ctrl_ipc_write(m3_ipc, m3_ipc->mem_type |
472 m3_ipc->vtt_conf |
473 m3_ipc->isolation_conf |
474 m3_ipc->halt, 4);
475
476 wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 2);
477 wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 3);
478 wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 6);
479 wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 7);
480
481 m3_ipc->state = M3_STATE_MSG_FOR_LP;
482
483 if (state == WKUP_M3_IDLE)
484 ret = wkup_m3_ping_noirq(m3_ipc);
485 else
486 ret = wkup_m3_ping(m3_ipc);
487
488 if (ret) {
489 dev_err(dev, "Unable to ping CM3\n");
490 return ret;
491 }
492
493 return 0;
494 }
495
496 /**
497 * wkup_m3_finish_low_power - Return m3 to reset state
498 * @m3_ipc: Pointer to wkup_m3_ipc context
499 *
500 * Returns 0 if reset was successful, otherwise returns error code
501 */
wkup_m3_finish_low_power(struct wkup_m3_ipc * m3_ipc)502 static int wkup_m3_finish_low_power(struct wkup_m3_ipc *m3_ipc)
503 {
504 struct device *dev = m3_ipc->dev;
505 int ret = 0;
506
507 if (!wkup_m3_is_available(m3_ipc))
508 return -ENODEV;
509
510 wkup_m3_ctrl_ipc_write(m3_ipc, IPC_CMD_RESET, 1);
511 wkup_m3_ctrl_ipc_write(m3_ipc, DS_IPC_DEFAULT, 2);
512
513 m3_ipc->state = M3_STATE_MSG_FOR_RESET;
514
515 ret = wkup_m3_ping(m3_ipc);
516 if (ret) {
517 dev_err(dev, "Unable to ping CM3\n");
518 return ret;
519 }
520
521 return 0;
522 }
523
524 /**
525 * wkup_m3_request_wake_src - Get the wakeup source info passed from wkup_m3
526 * @m3_ipc: Pointer to wkup_m3_ipc context
527 */
wkup_m3_request_wake_src(struct wkup_m3_ipc * m3_ipc)528 static const char *wkup_m3_request_wake_src(struct wkup_m3_ipc *m3_ipc)
529 {
530 unsigned int wakeup_src_idx;
531 int j, val;
532
533 val = wkup_m3_ctrl_ipc_read(m3_ipc, 6);
534
535 wakeup_src_idx = val & M3_WAKE_SRC_MASK;
536
537 for (j = 0; j < ARRAY_SIZE(wakeups) - 1; j++) {
538 if (wakeups[j].irq_nr == wakeup_src_idx)
539 return wakeups[j].src;
540 }
541 return wakeups[j].src;
542 }
543
544 /**
545 * wkup_m3_set_rtc_only - Set the rtc_only flag
546 * @m3_ipc: Pointer to wkup_m3_ipc context
547 */
wkup_m3_set_rtc_only(struct wkup_m3_ipc * m3_ipc)548 static void wkup_m3_set_rtc_only(struct wkup_m3_ipc *m3_ipc)
549 {
550 if (m3_ipc_state)
551 m3_ipc_state->is_rtc_only = true;
552 }
553
554 static struct wkup_m3_ipc_ops ipc_ops = {
555 .set_mem_type = wkup_m3_set_mem_type,
556 .set_resume_address = wkup_m3_set_resume_address,
557 .prepare_low_power = wkup_m3_prepare_low_power,
558 .finish_low_power = wkup_m3_finish_low_power,
559 .request_pm_status = wkup_m3_request_pm_status,
560 .request_wake_src = wkup_m3_request_wake_src,
561 .set_rtc_only = wkup_m3_set_rtc_only,
562 };
563
564 /**
565 * wkup_m3_ipc_get - Return handle to wkup_m3_ipc
566 *
567 * Returns NULL if the wkup_m3 is not yet available, otherwise returns
568 * pointer to wkup_m3_ipc struct.
569 */
wkup_m3_ipc_get(void)570 struct wkup_m3_ipc *wkup_m3_ipc_get(void)
571 {
572 if (m3_ipc_state)
573 get_device(m3_ipc_state->dev);
574 else
575 return NULL;
576
577 return m3_ipc_state;
578 }
579 EXPORT_SYMBOL_GPL(wkup_m3_ipc_get);
580
581 /**
582 * wkup_m3_ipc_put - Free handle to wkup_m3_ipc returned from wkup_m3_ipc_get
583 * @m3_ipc: A pointer to wkup_m3_ipc struct returned by wkup_m3_ipc_get
584 */
wkup_m3_ipc_put(struct wkup_m3_ipc * m3_ipc)585 void wkup_m3_ipc_put(struct wkup_m3_ipc *m3_ipc)
586 {
587 if (m3_ipc_state)
588 put_device(m3_ipc_state->dev);
589 }
590 EXPORT_SYMBOL_GPL(wkup_m3_ipc_put);
591
wkup_m3_rproc_boot_thread(void * arg)592 static int wkup_m3_rproc_boot_thread(void *arg)
593 {
594 struct wkup_m3_ipc *m3_ipc = arg;
595 struct device *dev = m3_ipc->dev;
596 int ret;
597
598 init_completion(&m3_ipc->sync_complete);
599
600 ret = rproc_boot(m3_ipc->rproc);
601 if (ret)
602 dev_err(dev, "rproc_boot failed\n");
603 else
604 m3_ipc_state = m3_ipc;
605
606 return 0;
607 }
608
wkup_m3_ipc_probe(struct platform_device * pdev)609 static int wkup_m3_ipc_probe(struct platform_device *pdev)
610 {
611 struct device *dev = &pdev->dev;
612 int irq, ret, temp;
613 phandle rproc_phandle;
614 struct rproc *m3_rproc;
615 struct task_struct *task;
616 struct wkup_m3_ipc *m3_ipc;
617 struct device_node *np = dev->of_node;
618
619 m3_ipc = devm_kzalloc(dev, sizeof(*m3_ipc), GFP_KERNEL);
620 if (!m3_ipc)
621 return -ENOMEM;
622
623 m3_ipc->ipc_mem_base = devm_platform_ioremap_resource(pdev, 0);
624 if (IS_ERR(m3_ipc->ipc_mem_base))
625 return PTR_ERR(m3_ipc->ipc_mem_base);
626
627 irq = platform_get_irq(pdev, 0);
628 if (irq < 0)
629 return irq;
630
631 ret = devm_request_irq(dev, irq, wkup_m3_txev_handler,
632 0, "wkup_m3_txev", m3_ipc);
633 if (ret) {
634 dev_err(dev, "request_irq failed\n");
635 return ret;
636 }
637
638 m3_ipc->mbox_client.dev = dev;
639 m3_ipc->mbox_client.tx_done = NULL;
640 m3_ipc->mbox_client.tx_prepare = NULL;
641 m3_ipc->mbox_client.rx_callback = NULL;
642 m3_ipc->mbox_client.tx_block = false;
643 m3_ipc->mbox_client.knows_txdone = false;
644
645 m3_ipc->mbox = mbox_request_channel(&m3_ipc->mbox_client, 0);
646
647 if (IS_ERR(m3_ipc->mbox)) {
648 dev_err(dev, "IPC Request for A8->M3 Channel failed! %ld\n",
649 PTR_ERR(m3_ipc->mbox));
650 return PTR_ERR(m3_ipc->mbox);
651 }
652
653 if (of_property_read_u32(dev->of_node, "ti,rproc", &rproc_phandle)) {
654 dev_err(&pdev->dev, "could not get rproc phandle\n");
655 ret = -ENODEV;
656 goto err_free_mbox;
657 }
658
659 m3_rproc = rproc_get_by_phandle(rproc_phandle);
660 if (!m3_rproc) {
661 dev_err(&pdev->dev, "could not get rproc handle\n");
662 ret = -EPROBE_DEFER;
663 goto err_free_mbox;
664 }
665
666 m3_ipc->rproc = m3_rproc;
667 m3_ipc->dev = dev;
668 m3_ipc->state = M3_STATE_RESET;
669
670 m3_ipc->ops = &ipc_ops;
671
672 if (!of_property_read_u32(np, "ti,vtt-gpio-pin", &temp)) {
673 if (temp >= 0 && temp <= 31)
674 wkup_m3_set_vtt_gpio(m3_ipc, temp);
675 else
676 dev_warn(dev, "Invalid VTT GPIO(%d) pin\n", temp);
677 }
678
679 if (of_property_read_bool(np, "ti,set-io-isolation"))
680 wkup_m3_set_io_isolation(m3_ipc);
681
682 ret = of_property_read_string(np, "firmware-name",
683 &m3_ipc->sd_fw_name);
684 if (ret) {
685 dev_dbg(dev, "Voltage scaling data blob not provided from DT.\n");
686 }
687
688 /*
689 * Wait for firmware loading completion in a thread so we
690 * can boot the wkup_m3 as soon as it's ready without holding
691 * up kernel boot
692 */
693 task = kthread_run(wkup_m3_rproc_boot_thread, m3_ipc,
694 "wkup_m3_rproc_loader");
695
696 if (IS_ERR(task)) {
697 dev_err(dev, "can't create rproc_boot thread\n");
698 ret = PTR_ERR(task);
699 goto err_put_rproc;
700 }
701
702 wkup_m3_ipc_dbg_init(m3_ipc);
703
704 return 0;
705
706 err_put_rproc:
707 rproc_put(m3_rproc);
708 err_free_mbox:
709 mbox_free_channel(m3_ipc->mbox);
710 return ret;
711 }
712
wkup_m3_ipc_remove(struct platform_device * pdev)713 static void wkup_m3_ipc_remove(struct platform_device *pdev)
714 {
715 wkup_m3_ipc_dbg_destroy(m3_ipc_state);
716
717 mbox_free_channel(m3_ipc_state->mbox);
718
719 rproc_shutdown(m3_ipc_state->rproc);
720 rproc_put(m3_ipc_state->rproc);
721
722 m3_ipc_state = NULL;
723 }
724
wkup_m3_ipc_suspend(struct device * dev)725 static int __maybe_unused wkup_m3_ipc_suspend(struct device *dev)
726 {
727 /*
728 * Nothing needs to be done on suspend even with rtc_only flag set
729 */
730 return 0;
731 }
732
wkup_m3_ipc_resume(struct device * dev)733 static int __maybe_unused wkup_m3_ipc_resume(struct device *dev)
734 {
735 if (m3_ipc_state->is_rtc_only) {
736 rproc_shutdown(m3_ipc_state->rproc);
737 rproc_boot(m3_ipc_state->rproc);
738 }
739
740 m3_ipc_state->is_rtc_only = false;
741
742 return 0;
743 }
744
745 static const struct dev_pm_ops wkup_m3_ipc_pm_ops = {
746 SET_SYSTEM_SLEEP_PM_OPS(wkup_m3_ipc_suspend, wkup_m3_ipc_resume)
747 };
748
749 static const struct of_device_id wkup_m3_ipc_of_match[] = {
750 { .compatible = "ti,am3352-wkup-m3-ipc", },
751 { .compatible = "ti,am4372-wkup-m3-ipc", },
752 {},
753 };
754 MODULE_DEVICE_TABLE(of, wkup_m3_ipc_of_match);
755
756 static struct platform_driver wkup_m3_ipc_driver = {
757 .probe = wkup_m3_ipc_probe,
758 .remove_new = wkup_m3_ipc_remove,
759 .driver = {
760 .name = "wkup_m3_ipc",
761 .of_match_table = wkup_m3_ipc_of_match,
762 .pm = &wkup_m3_ipc_pm_ops,
763 },
764 };
765
766 module_platform_driver(wkup_m3_ipc_driver);
767
768 MODULE_LICENSE("GPL v2");
769 MODULE_DESCRIPTION("wkup m3 remote processor ipc driver");
770 MODULE_AUTHOR("Dave Gerlach <d-gerlach@ti.com>");
771